- 12 May, 2018 5 commits
-
-
Vitaly Wool authored
Do not try to optimize in-page object layout while the page is under reclaim. This fixes lock-ups on reclaim and improves reclaim performance at the same time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20180430125800.444cae9706489f412ad12621@gmail.comSigned-off-by:
Vitaly Wool <vitaly.vul@sony.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeffrey Hugo authored
load_module() creates W+X mappings via __vmalloc_node_range() (from layout_and_allocate()->move_module()->module_alloc()) by using PAGE_KERNEL_EXEC. These mappings are later cleaned up via "call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module(). This is a problem because call_rcu_sched() queues work, which can be run after debug_checkwx() is run, resulting in a race condition. If hit, the race results in a nasty splat about insecure W+X mappings, which results in a poor user experience as these are not the mappings that debug_checkwx() is intended to catch. This issue is observed on multiple arm64 platforms, and has been artificially triggered on an x86 platform. Address the race by flushing the queued work before running the arch-defined mark_rodata_ro() which then calls debug_checkwx(). Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org Fixes: e1a58320 ("x86/mm: Warn on W^X mappings") Signed-off-by:
Jeffrey Hugo <jhugo@codeaurora.org> Reported-by:
Timur Tabi <timur@codeaurora.org> Reported-by:
Jan Glauber <jan.glauber@caviumnetworks.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Yury Norov authored
test_find_first_bit() is intentionally sub-optimal, and may cause soft lockup due to long time of run on some systems. So decrease length of bitmap to traverse to avoid lockup. With the change below, time of test execution doesn't exceed 0.2 seconds on my testing system. Link: http://lkml.kernel.org/r/20180420171949.15710-1-ynorov@caviumnetworks.com Fixes: 4441fca0 ("lib: test module for find_*_bit() functions") Signed-off-by:
Yury Norov <ynorov@caviumnetworks.com> Reviewed-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Dmitry Vyukov authored
Currently STRUCTLEAK inserts initialization out of live scope of variables from KASAN point of view. This leads to KASAN false positive reports. Prohibit this combination for now. Link: http://lkml.kernel.org/r/20180419172451.104700-1-dvyukov@google.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
Shuah Khan (Samsung OSG) authored
Update email address in MAINTAINERS file due to IT infrastructure changes at Samsung. Link: http://lkml.kernel.org/r/20180501212815.25911-1-shuah@kernel.orgSigned-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 11 May, 2018 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix two PCI power management regressions from the 4.13 cycle and one cpufreq schedutil governor bug introduced during the 4.12 cycle, drop a stale comment from the schedutil code and fix two mistakes in docs. Specifics: - Restore device_may_wakeup() check in pci_enable_wake() removed inadvertently during the 4.13 cycle to prevent systems from drawing excessive power when suspended or off, among other things (Rafael Wysocki). - Fix pci_dev_run_wake() to properly handle devices that only can signal PME# when in the D3cold power state (Kai Heng Feng). - Fix the schedutil cpufreq governor to avoid using UINT_MAX as the new CPU frequency in some cases due to a missing check (Rafael Wysocki). - Remove a stale comment regarding worker kthreads from the schedutil cpufreq governor (Juri Lelli). - Fix a copy-paste mistake in the intel_pstate driver documentation (Juri Lelli). - Fix a typo in the system sleep states documentation (Jonathan Neuschäfer)" * tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / PM: Check device_may_wakeup() in pci_enable_wake() PCI / PM: Always check PME wakeup capability for runtime wakeup support cpufreq: schedutil: Avoid using invalid next_freq cpufreq: schedutil: remove stale comment PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph PM: docs: sleep-states: Fix a typo ("includig") -
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull mtd fixes from Boris Brezillon: - make nand_soft_waitrdy() wait tWB before polling the status REG - fix BCH write in the the Marvell NAND controller driver - fix wrong picosec to msec conversion in the Marvell NAND controller driver - fix DMA handling in the TI OneNAND controllre driver * tag 'mtd/fixes-for-4.17-rc5' of git://git.infradead.org/linux-mtd: mtd: rawnand: Make sure we wait tWB before polling the STATUS reg mtd: rawnand: marvell: fix command xtype in BCH write hook mtd: rawnand: marvell: pass ms delay to wait_op mtd: onenand: omap2: Disable DMA for HIGHMEM buffers
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "nouveau, amdgpu, i915, vc4, omap, exynos and atomic fixes. As last week seemed a bit slow, we got a few more fixes this week. The main stuff is two weeks of fixes for amdgpu, some missing bits of vega12 atom firmware support were added, and some power management fixes. Nouveau got two regression fixes for an DP MST deadlock and a random oops fix. i915 got an LVDS panel timeout fix 2 WARN fixes. exynos fixed a pagefault issue in the mixer driver. vc4 has an oops fix. omap had a bunch of uninit var and error-checking fixes. Two atomic modesetting state fixes. One minor agp cleanup patch" * tag 'drm-fixes-for-v4.17-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/amd/pp: Fix performance drop on Fiji drm/nouveau: Fix deadlock in nv50_mstm_register_connector() drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client agp: uninorth: make two functions static drm/amd/pp: Refine the output of pp_power_profile_mode on VI drm/amdgpu: Switch to interruptable wait to recover from ring hang. drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages drm/amd/display: Use kvzalloc for potentially large allocations drm/amd/display: Don't return ddc result and read_bytes in same return value drm/amd/display: Add get_firmware_info_v3_2 for VG12 drm/amd: Add BIOS smu_info v3_3 required struct def. drm/amd/display: Add VG12 ASIC IDs drm/vc4: Fix scaling of uni-planar formats drm/exynos: hdmi: avoid duplicating drm_bridge_attach drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout drm/i915: Adjust eDP's logical vco in a reliable place. drm/bridge/sii8620: add Kconfig dependency on extcon drm/omap: handle alloc failures in omap_connector drm/omap: add missing linefeeds to prints ...
-
Rafael J. Wysocki authored
* pm-pci: PCI / PM: Check device_may_wakeup() in pci_enable_wake() PCI / PM: Always check PME wakeup capability for runtime wakeup support * pm-docs: PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph PM: docs: sleep-states: Fix a typo ("includig") -
Jann Horn authored
Commit 3a4d44b6 ("ntp: Move adjtimex related compat syscalls to native counterparts") removed the memset() in compat_get_timex(). Since then, the compat adjtimex syscall can invoke do_adjtimex() with an uninitialized ->tai. If do_adjtimex() doesn't write to ->tai (e.g. because the arguments are invalid), compat_put_timex() then copies the uninitialized ->tai field to userspace. Fix it by adding the memset() back. Fixes: 3a4d44b6 ("ntp: Move adjtimex related compat syscalls to native counterparts") Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Single amdgpu regression fix * 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: Fix performance drop on Fiji
-
- 10 May, 2018 13 commits
-
-
Linus Torvalds authored
Merge tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix for DM integrity to use kvfree - fix for a 4.17-rc1 change to dm-bufio's buffer alignment - fixes for a few sparse warnings - remove VLA usage in DM mirror target - improve DM thinp Documentation for the "read_only" feature * tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: update Documentation to clarify when "read_only" is valid dm mirror: remove VLA usage dm: fix some sparse warnings and whitespace in dax methods dm cache background tracker: fix sparse warning dm bufio: fix buffer alignment dm integrity: use kvfree for kvmalloc'd memory
-
Mike Snitzer authored
Due to user confusion, clarify that it doesn't make sense to try to create a thin-pool with "read_only" mode enabled. Signed-off-by:Mike Snitzer <snitzer@redhat.com>
-
Rafael J. Wysocki authored
Commit 0847684c (PCI / PM: Simplify device wakeup settings code) went too far and dropped the device_may_wakeup() check from pci_enable_wake() which causes wakeup to be enabled during system suspend, hibernation or shutdown for some PCI devices that are not allowed by user space to wake up the system from sleep (or power off). As a result of this, excessive power is drawn by some of the affected systems while in sleep states or off. Restore the device_may_wakeup() check in pci_enable_wake(), but make sure that the PCI bus type's runtime suspend callback will not call device_may_wakeup() which is about system wakeup from sleep and not about device wakeup from runtime suspend. Fixes: 0847684c (PCI / PM: Simplify device wakeup settings code) Reported-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Cc: 4.13+ <stable@vger.kernel.org> # 4.13+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com>
-
Rex Zhu authored
The performance drop if the default TDP more than 256 Watt Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Boris Brezillon authored
NAND chips require a bit of time to take the NAND operation into account and set the BUSY bit in the STATUS reg. Make sure we don't poll the STATUS reg too early in nand_soft_waitrdy(). Fixes: 8878b126 ("mtd: nand: add ->exec_op() implementation") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Miquel Raynal <miquel.raynal@bootlin.com>
-
git://github.com/skeggsb/linuxDave Airlie authored
Two nouveau crasher/deadlock fixes. * 'linux-4.17' of git://github.com/skeggsb/linux: drm/nouveau: Fix deadlock in nv50_mstm_register_connector() drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client
-
Lyude Paul authored
Currently; we're grabbing all of the modesetting locks before adding MST connectors to fbdev. This isn't actually necessary, and causes a deadlock as well: ====================================================== WARNING: possible circular locking dependency detected 4.17.0-rc3Lyude-Test+ #1 Tainted: G O ------------------------------------------------------ kworker/1:0/18 is trying to acquire lock: 00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] but task is already holding lock: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (crtc_ww_class_mutex){+.+.}: ww_mutex_lock+0x43/0x80 drm_modeset_lock+0x71/0x130 [drm] drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (crtc_ww_class_acquire){+.+.}: drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dev->mode_config.mutex){+.+.}: drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&helper->lock){+.+.}: __mutex_lock+0x70/0x9d0 drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(crtc_ww_class_mutex); lock(crtc_ww_class_acquire); lock(crtc_ww_class_mutex); lock(&helper->lock); *** DEADLOCK *** 5 locks held by kworker/1:0/18: #0: 000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650 #1: 00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650 #2: 00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm] #3: 00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm] #4: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] stack backtrace: CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G O 4.17.0-rc3Lyude-Test+ #1 Hardware name: Gateway FX6840/FX6840, BIOS P01-A3 05/17/2010 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] Call Trace: dump_stack+0x85/0xcb print_circular_bug.isra.38+0x1ce/0x1db __lock_acquire+0x128f/0x1350 ? lock_acquire+0x9f/0x200 ? lock_acquire+0x9f/0x200 ? __ww_mutex_lock.constprop.13+0x8f/0x1000 lock_acquire+0x9f/0x200 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] __mutex_lock+0x70/0x9d0 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? ww_mutex_lock+0x43/0x80 ? _cond_resched+0x15/0x30 ? ww_mutex_lock+0x43/0x80 ? drm_modeset_lock+0xb2/0x130 [drm] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] ? mark_held_locks+0x50/0x80 ? kfree+0xcf/0x2a0 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] ? trace_hardirqs_on_caller+0xed/0x180 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] ? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau] ? find_held_lock+0x2d/0x90 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] ? __mutex_unlock_slowpath+0x3b/0x280 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 ? process_one_work+0x650/0x650 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x50/0x50 ret_from_fork+0x3a/0x50 Taking example from i915, the only time we need to hold any modesetting locks is when changing the port on the mstc, and in that case we only need to hold the connection mutex. Signed-off-by:Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Potentially responsible for some random OOPSes. Signed-off-by: -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A little bigger than normal since this is two weeks of fixes. - Atom firmware table updates for vega12 - Fix fallout from huge page support - Fix up smu7 power profile interface to be consistent with vega - Misc other fixes * 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: Refine the output of pp_power_profile_mode on VI drm/amdgpu: Switch to interruptable wait to recover from ring hang. drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages drm/amd/display: Use kvzalloc for potentially large allocations drm/amd/display: Don't return ddc result and read_bytes in same return value drm/amd/display: Add get_firmware_info_v3_2 for VG12 drm/amd: Add BIOS smu_info v3_3 required struct def. drm/amd/display: Add VG12 ASIC IDs
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
atomic: Clear state pointers on clear (Ville) vc4: Fix oops in dpi disable (Eric) omap: Various error-checking + uninitialized var fixes (Tomi) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> * tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc: drm/vc4: Fix scaling of uni-planar formats drm/bridge/sii8620: add Kconfig dependency on extcon drm/omap: handle alloc failures in omap_connector drm/omap: add missing linefeeds to prints drm/omap: handle error if scale coefs are not found drm/omap: check return value from soc_device_match drm/omap: fix possible NULL ref issue in tiler_reserve_2d drm/omap: fix uninitialized ret variable drm/omap: silence unititialized variable warning drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge. drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear() drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Increase LVDS panel timeout to 5s to avoid spurious *ERROR* - Fix 2 WARNS: BIOS framebuffer related (FDO #105992) and eDP cdclk mismatch * tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout drm/i915: Adjust eDP's logical vco in a reliable place.
-
Dave Airlie authored
Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fixup pagefault issue of mixer driver - it makes sure to check shadow register for interlace scan. - it corrects chroma_addr[1], height and vertical position values. And trivial cleanup - it just removes duplicated drm_bridge_attach. * tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: hdmi: avoid duplicating drm_bridge_attach drm/exynos: mixer: avoid Oops in vp_video_buffer() drm/exynos/mixer: fix synchronization check in interlaced mode
-
Mathieu Malaterre authored
Both ‘uninorth_remove_memory’ and ‘null_cache_flush’ can be made static. So make them. Silence the following gcc warning (W=1): drivers/char/agp/uninorth-agp.c:198:5: warning: no previous prototype for ‘uninorth_remove_memory’ [-Wmissing-prototypes] and drivers/char/agp/uninorth-agp.c:473:6: warning: no previous prototype for ‘null_cache_flush’ [-Wmissing-prototypes] Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 09 May, 2018 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - quirk for Toshiba Click Mini L9W-B, from Hans de Goede - intel-ish-hid and wacom error handling (device freeing) path fixes from Arvind Yadav - memory corruption fix in intel-ish-hid driver from Hans de Goede - a few new device ID additions to hid-lenovo from Peter Ganzhorn * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B HID: intel-ish-hid: use put_device() instead of kfree() HID: intel_ish-hid: Stop using a static local buffer in get_report() HID: intel_ish-hid: Move header size check to inside the loop HID: wacom: Release device resource data obtained by devres_alloc() HID: lenovo: Add support for IBM/Lenovo Scrollpoint mice
-
Rex Zhu authored
In order to keep consist with Vega, the output format of the pp_power_profile_mode would be <integer><mode name string>< “*” for current profile>:"detail settings" and remove the "CURRENT" mode line. for example: NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING: 10 0 30 - - - 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM *: 0 5 30 0 100 10 NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING *: 10 0 30 0 100 10 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM: - - - - - - Reviewed-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Andrey Grodzovsky authored
v2: Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT) Avoid printing error message for ERESTARTSYS Originally-by:
David Panariti <David.Panariti@amd.com> Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Michel Dänzer authored
GFP_TRANSHUGE tries very hard to allocate huge pages, which can result in long delays with high memory pressure. I have observed firefox freezing for up to around a minute due to this while restic was taking a full system backup. Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT | __GFP_NORETRY instead, in order to fail quickly when there are no huge pages available. Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed up in the background if necessary. With these changes, I'm no longer seeing freezes during a restic backup. Cc: stable@vger.kernel.org Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Michel Dänzer authored
Allocating up to 32 physically contiguous pages can easily fail (and has failed for me), and isn't necessary anyway. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Harry Wentland authored
The two ranges overlap. Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Jerry (Fangzhi) Zuo authored
Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Harry Wentland authored
Signed-off-by:
-
Hans de Goede authored
The 0457:10fb touchscreen found on the Toshiba Click Mini L9W-B needs to have a report-decriptors command send to it on resume in order for the touchscreen to start generating events again on resume. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Kai Heng Feng authored
USB controller ASM1042 stops working after commit de3ef1eb (PM / core: Drop run_wake flag from struct dev_pm_info). The device in question is not power managed by platform firmware, furthermore, it only supports PME# from D3cold: Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Before commit de3ef1eb, the device never gets runtime suspended. After that commit, the device gets runtime suspended to D3hot, which can not generate any PME#. usb_hcd_pci_probe() unconditionally calls device_wakeup_enable(), hence device_can_wakeup() in pci_dev_run_wake() always returns true. So pci_dev_run_wake() needs to check PME wakeup capability as its first condition. In addition, change wakeup flag passed to pci_target_state() from false to true, because we want to find the deepest state different from D3cold that the device can still generate PME#. In this case, it's D0 for the device in question. Fixes: de3ef1eb (PM / core: Drop run_wake flag from struct dev_pm_info) Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: 4.13+ <stable@vger.kernel.org> # 4.13+ Acked-by:
-
Rafael J. Wysocki authored
If the next_freq field of struct sugov_policy is set to UINT_MAX, it shouldn't be used for updating the CPU frequency (this is a special "invalid" value), but after commit b7eaf1aa (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely) it may be passed as the new frequency to sugov_update_commit() in sugov_update_single(). Fix that by adding an extra check for the special UINT_MAX value of next_freq to sugov_update_single(). Fixes: b7eaf1aa (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely) Reported-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.12+ <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Juri Lelli authored
After commit 794a56eb (sched/cpufreq: Change the worker kthread to SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency selection point of view, so the potential corner case for RT tasks is not possible at all now. Remove the stale comment mentioning it. Signed-off-by:
Juri Lelli <juri.lelli@redhat.com> Signed-off-by:
-
Juri Lelli authored
P-state selection algorithm (powersave or performance) is selected by echoing the desired choice to scaling_governor sysfs attribute and not to scaling_cur_freq (as currently stated). Fix it. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Jonathan Neuschäfer authored
Fix a typo in admin-guide/pm/sleep-states.rst. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Boris Brezillon authored
When using uni-planar formats (like RGB), the scaling parameters are stored in plane 0, not plane 1. Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com
-
