- 02 Dec, 2021 4 commits
-
-
Matan Ziv-Av authored
LG uses 5 instead of 0 in the third digit (second digit after 2019) of the year string to indicate newer models in the same year. Handle this case as well. Signed-off-by:
Matan Ziv-Av <matan@svgalib.org> Link: https://lore.kernel.org/r/c752b3b2-9718-bd9a-732d-e165aa8a1fca@svgalib.orgSigned-off-by:
Hans de Goede <hdegoede@redhat.com>
-
Yang Li authored
Eliminate the following coccicheck warning: ./drivers/platform/x86/asus-wmi.c:2386:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1637719332-45224-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
-
Hans de Goede authored
There have been various bugs / forum threads about allowing control of the LED in the ThinkPad logo on the lid of various models. This seems to be something which users want to control and there really is no reason to require setting CONFIG_THINKPAD_ACPI_UNSAFE_LEDS for this. The lid-logo-dot is LED number 10, so change the name of the 10th led from unknown_led2 to lid_logo_dot and add it to the TPACPI_SAFE_LEDS mask. Link: https://www.reddit.com/r/thinkpad/comments/7n8eyu/thinkpad_led_control_under_gnulinux/ BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1943318Signed-off-by:
-
Hans de Goede authored
Add the LED_RETAIN_AT_SHUTDOWN flag to the registered led_class_devs so that the LEDs do not get turned-off when reloading the driver and thus so that they also stay under default EC control when reloading the driver, unless explicitly overridden by the user. Signed-off-by:
-
- 25 Nov, 2021 11 commits
-
-
Hans de Goede authored
After the recent sysfs-attributes registration cleanups, the tp_features.sensors_pdev_attrs_registered flag only ever gets set and never gets read, remove it. Signed-off-by:
-
Hans de Goede authored
The hwmon sysfs-attr should show up under the hwmon-classdev, not under the tpacpi_sensors_pdev. Pass the tpacpi_hwmon_groups attr-groups array to hwmon_device_register_with_groups() instead of setting tpacpi_hwmon_pdriver.driver.dev_groups to it to fix this. This also requires moving the hwmon_device_register_with_groups() call to after the subdriver init functions have run so that the is_visible() calls will work properly. Fixes: 79f960e2 ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups") Cc: Len Baker <len.baker@gmx.com> Signed-off-by:
-
Hans de Goede authored
Commit 79f960e2 ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups") put the debug_level, interface_version, version and the THINKPAD_ACPI_DEBUGFACILITIES attributes in a new tpacpi_attr_group and added those to the tpacpi_groups groups-array which is used to initialize the driver.dev_groups member. But before this commit these attributes were registered with driver_create_file(), so they should be part of the groups-array which is used to initialize the driver.groups member instead. And also make the same change for the fan_watchdog hwmon driver attribute. Fixes: 79f960e2 ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups") Cc: Len Baker <len.baker@gmx.com> Signed-off-by:
-
Hans de Goede authored
Commit 79f960e2 ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups") introduces the use of driver.dev_groups + attribute_group.is_visible callbacks replacing the conditional calling of driver_create_file() for optional attributes. The is_visible callbacks rely on various tp_features.has_foo flags, which get set by the subdriver init functions. But before this fix, thinkpad_acpi_module_init() would call the subdriver init functions after registering the platform_device and the tpacpi_pdriver. Which would cause the is_visible callbacks to get called before the subdriver init functions, which in turn would cause optional attributes to not get registered at all, even when the feature is actually present. Fix this by moving the platform_driver_register(&tpacpi_pdriver) to after the subdriver init calls; and do the same for the tpacpi_hmon_pdriver. Fixes: 79f960e2 ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups") Cc: Len Baker <len.baker@gmx.com> Signed-off-by:
-
Hans de Goede authored
Commit c99ca78d ("platform/x86: thinkpad_acpi: Switch to common use of attributes") removed the conditional adding of the hotkey_tablet_mode and hotkey_radio_sw sysfs-attributes, replacing this with a hotkey_attr_is_visible() callback which hides them when the feature is not present. But this commit forgot to add these 2 attributes to the default hotkey_attributes[] set, so they would now never get added at all. Add the 2 attributes to the default hotkey_attributes[] set so that they are available on systems with these features once more. Fixes: c99ca78d ("platform/x86: thinkpad_acpi: Switch to common use of attributes") Cc: Len Baker <len.baker@gmx.com> Signed-off-by:
-
Hans de Goede authored
Fix thermal_temp_input_attr sorting. Now that we use is_visible, rather then registering only part of the thermal_temp_input_attr array, putting attr 0-7 last is no longer needed. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by:
Mark Pearson <mpearson@lenovo.com> Signed-off-by:
-
Hans de Goede authored
The err_exit label just does a: return (res < 0) ? res : -ENODEV; And res is always < 0 when we go there (hotkey_mask_get() returns either 0 or -EIO), so the goto-s can simply be replaced with "return res". Reviewed-by:
-
Hans de Goede authored
The previous refactoring of some code in tpacpi_dytc_profile_init() left a weirdly indented code-block behind. Remove the unnecessary '{}' and reduce the indent level one step, other then changing the indentation the code is completely unchanged. Reviewed-by: -
Hans de Goede authored
Remove the dytc_profile_available check from dytc_profile_set(), that function only gets called if the platform_profile_handler was registered, so the check is not necessary. Make tpacpi_dytc_profile_init() return -ENODEV when it does not register the platform_profile() handler this will cause dytc_profile_driver_data.flags.init to not get set, which in turn will cause the dytc_profile_exit() call to get skipped. Together this avoids the need to have the dytc_profile_available variable at all, since the information is now duplicated in the dytc_profile_driver_data.flags.init flag. Note this leaves a weirdly indented code-block behind, this is deliberately done to make what actually changes in this commit clear. This will be fixed-up in the next commit. Reviewed-by:
-
Hans de Goede authored
The only reason the proxysensor code needs dytc_version handling is for proxsensor_attr_is_visible() and that will only ever get called after all the subdrv init() callbacks have run. tpacpi_dytc_profile_init() already calls DYTC_CMD_QUERY and is the primary consumer of dytc_version, so simply let tpacpi_dytc_profile_init() set dytc_version and remove the now no longer necessary dytc_get_version() helper and its calls. Reviewed-by:
-
Hans de Goede authored
Make ibm_init_struct.init() callbacks return -ENODEV instead of 1 when the subdevice / function is not available. Using -ENODEV clearly states what it going on where as a magic return of "1" requires a deep dive into the code to figure out what is going on. This also allows for some cleanups, avoiding the need to translate an -ENODEV return into "return 1" (which often mistakenly was "return 0"). Reviewed-by:
-
- 22 Nov, 2021 3 commits
-
-
Hans de Goede authored
Commit 79f960e2 ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups") accidentally modified tpacpi_kbdlang_init() causing it to return -ENODEV instead of 0 on machines without kbdlang support (which are most of them). ibm_init() sees this -ENODEV as an error causing the entire module to not load, not good. Note that technically tpacpi_kbdlang_init() was already buggy before, it should have returned 1 instead of 0 if the feature is not present. Rather then fixing tpacpi_kbdlang_init() though, IMHO it is bettter to just make ibm_init() treat -ENODEV as 1 to fix the issue; and then in a followup commit also change all the existing "return 1"s from ibm_init_struct.init() callbacks to "return -ENODEV" as -ENODEV clearly states what it going on where as a magic return of "1" requires a deep dive into the code to figure out what is going on. This will also allow removing some extra ifs to translate -ENODEV to return 1 in a couple of init() callbacks. Fixes: 79f960e2 ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups") Cc: Len Baker <len.baker@gmx.com> Reviewed-by:
-
Hans de Goede authored
Creating the tlmi_pwd_setting structs can only fail with -ENOMEM, set ret to this once and simplify the error handling a bit. Tested-by:
Mark Pearson <markpearson@lenovo.com> Signed-off-by:
-
Hans de Goede authored
All callers of tlmi_create_auth() also call kobject_init(&pwd_setting->kobj, &tlmi_pwd_setting_ktype) on the returned tlmi_pwd_setting struct. Move this into tlmi_create_auth(). Tested-by:
-
- 18 Nov, 2021 2 commits
-
-
Mark Pearson authored
Implement Opcode support. This is available on ThinkCenter and ThinkStations platforms and gives improved password setting capabilities Add options to configure System, HDD & NVMe passwords. HDD & NVMe passwords need a user level (user/master) along with drive index. Signed-off-by:
-
Mark Pearson authored
Newer Lenovo BIOS's have an opcode GUID support interface which provides - improved password setting control - ability to set System, hard drive and NVMe passwords Add the support for these new passwords, and the ability to select user/master mode and the drive index. Signed-off-by:
-
- 16 Nov, 2021 14 commits
-
-
Maximilian Luz authored
Rename the device registration function to better align names with the newly introduced device removal function. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20211028002243.1586083-4-luzmaximilian@gmail.comReviewed-by:
-
Maximilian Luz authored
Use generic client removal function introduced in the previous commit instead of defining our own one. Signed-off-by:
-
Maximilian Luz authored
Currently, there are similar functions defined in the Aggregator Registry and the controller core. Make client device removal more generic and export it. We can then use this function later on to remove client devices from device hubs as well as the controller and avoid re-defining similar things. Signed-off-by:
-
Luke D. Jones authored
Add support for custom fan curves found on some ASUS ROG laptops. These laptops have the ability to set a custom curve for the CPU and GPU fans via two ACPI methods. This patch adds two pwm<N> attributes to the hwmon sysfs, pwm1 for CPU fan, pwm2 for GPU fan. Both are under the hwmon of the name `asus_custom_fan_curve`. There is no safety check of the set fan curves - this must be done in userspace. The fans have settings [1,2,3] under pwm<N>_enable: 1. Enable and write settings out 2. Disable and use factory fan mode 3. Same as 2, additionally restoring default factory curve. Use of 2 means that the curve the user has set is still stored and won't be erased, but the laptop will be using its default auto-fan mode. Re-enabling the manual mode then activates the curves again. Notes: - pwm<N>_enable = 0 is an invalid setting. - pwm is actually a percentage and is scaled on writing to device. Signed-off-by:
Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20211024033705.5595-2-luke@ljones.devReviewed-by:
-
Len Baker authored
Platform drivers have the option of having the platform core create and remove any needed sysfs attribute files. So take advantage of that and refactor the attributes management to avoid to register them "by hand". Also, due to some attributes are optionals, refactor the code and move the logic inside the "is_visible" callbacks of the attribute_group structures. Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20211023154036.6800-1-len.baker@gmx.comReviewed-by:
-
Vincent Bernat authored
The different values were offset by 1. 0 is for "home mode", 1 for "web-browser mode", etc. Moreover, the URL to the laptop's user guide did not work anymore. Signed-off-by:
Vincent Bernat <vincent@bernat.ch> Link: https://lore.kernel.org/r/20211109195209.176905-1-vincent@bernat.chSigned-off-by:
-
Slark Xiao authored
When WWAN device wake from S3 deep, under thinkpad platform, WWAN would be disabled. This disable status could be checked by command 'nmcli r wwan' or 'rfkill list'. Issue analysis as below: When host resume from S3 deep, thinkpad_acpi driver would call hotkey_resume() function. Finnaly, it will use wan_get_status to check the current status of WWAN device. During this resume progress, wan_get_status would always return off even WWAN boot up completely. In patch V2, Hans said 'sw_state should be unchanged after a suspend/resume. It's better to drop the tpacpi_rfk_update_swstate call all together from the resume path'. And it's confimed by Lenovo that GWAN is no longer available from WHL generation because the design does not match with current pin control. Signed-off-by:
Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.comReviewed-by:
-
Jimmy Wang authored
This adds dual fan control for P1 / X1 Extreme Gen4 Signed-off-by:
Jimmy Wang <jimmy221b@163.com> Link: https://lore.kernel.org/r/20211105090528.39677-1-jimmy221b@163.comSigned-off-by:
-
Alex Williamson authored
A Lenovo ThinkStation S20 (4157CTO BIOS 60KT41AUS) fails to boot on recent kernels including the think-lmi driver, due to the fact that errors returned by the tlmi_analyze() function are ignored by tlmi_probe(), where tlmi_sysfs_init() is called unconditionally. This results in making use of an array of already freed, non-null pointers and other uninitialized globals, causing all sorts of nasty kobject and memory faults. Make use of the analyze function return value, free a couple leaked allocations, and remove the settings_count field, which is incremented but never consumed. Fixes: a40cd7ef ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Reviewed-by:
Mark Gross <markgross@kernel.org> Reviewed-by:
-
Thomas Weißschuh authored
dell-wmi-descriptor only provides symbols to other drivers. These drivers already select dell-wmi-descriptor when needed. This fixes an issue where dell-wmi-descriptor is compiled as a module with localyesconfig on a non-Dell machine. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20211113080551.61860-1-linux@weissschuh.netReviewed-by:
-
Jason Wang authored
The double `it' is repeated in a comment, therefore one of them is removed. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20211113054827.199517-1-wangborong@cdjrlc.comSigned-off-by:
-
Christophe JAILLET authored
If 'led_classdev_register()' fails, some additional resources should be released. Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls that are already in the remove function but are missing here. Fixes: a4c724d0 ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream") Fixes: 9e0c7978 ("lis3lv02d: merge with leds hp disk") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.frReviewed-by:
-
Hans de Goede authored
Since the "Add special handling for timer based S0i3 wakeup" changes the amd-pmc code now relies on symbols from the RTC-class code, add a dependency for this to Kconfig. Fixes: 59348401 ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup") Cc: Mario Limonciello <mario.limonciello@amd.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20211102153256.76956-1-hdegoede@redhat.com
-
Dan Carpenter authored
This code should be using PTR_ERR() instead of IS_ERR(). And because it's using the wrong "dev->client" pointer, the IS_ERR() check will be false, meaning the function returns success. Fixes: 62f9529b ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211110074346.GB5176@kiliReviewed-by:
-
- 14 Nov, 2021 6 commits
-
-
Linus Torvalds authored
-
Gustavo A. R. Silva authored
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236Co-developed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Tested-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs cleanups from Darrick Wong: "The most 'exciting' aspect of this branch is that the xfsprogs maintainer and I have worked through the last of the code discrepancies between kernel and userspace libxfs such that there are no code differences between the two except for #includes. IOWs, diff suffices to demonstrate that the userspace tools behave the same as the kernel, and kernel-only bits are clearly marked in the /kernel/ source code instead of just the userspace source. Summary: - Clean up open-coded swap() calls. - A little bit of #ifdef golf to complete the reunification of the kernel and userspace libxfs source code" * tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: sync xfs_btree_split macros with userspace libxfs xfs: #ifdef out perag code for userspace xfs: use swap() to make dabtree code cleaner -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc fixes from Helge Deller: "Fix a build error in stracktrace.c, fix resolving of addresses to function names in backtraces, fix single-stepping in assembly code and flush userspace pte's when using set_pte_at()" * tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/entry: fix trace test in syscall exit path parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page parisc: Fix implicit declaration of function '__kernel_text_address' parisc: Fix backtrace to always include init funtion names
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker. * tag 'sh-for-5.16' of git://git.libc.org/linux-sh: sh: pgtable-3level: Fix cast to pointer from integer of different size sh: fix READ/WRITE redefinition warnings sh: define __BIG_ENDIAN for math-emu sh: math-emu: drop unused functions sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: Cleanup about SPARSE_IRQ sh: kdump: add some attribute to function maple: fix wrong return value of maple_bus_init(). sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/ sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y sh: boards: Fix the cacography in irq.c sh: check return code of request_irq sh: fix trivial misannotations
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap()
-
