- 14 Nov, 2023 34 commits
-
-
Dmitry Baryshkov authored
Since keypad is used only by some devices, disable it by default and enable explicitly. Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-34-dmitry.baryshkov@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Dmitry Baryshkov authored
The vph-pwr and boost regulators (even if they are unified by design) are not a property of SoC, so move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. The only msm8960 board file (qcom-msm8960-cdp) also defines this node together with the compatible string. Drop the useless device node. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by:
-
Dmitry Baryshkov authored
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by:
-
Dmitry Baryshkov authored
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by:
-
Dmitry Baryshkov authored
Use symbolic names for IRQ flags instead of using the numeric values. Reviewed-by:
-
Dmitry Baryshkov authored
Move reg property to come after compatible. Reviewed-by:
-
Dmitry Baryshkov authored
Move reg property to come after compatible. Reviewed-by:
-
Dmitry Baryshkov authored
Move pm8921 device nodes to follow the alphanumberic sorting order. Reviewed-by:
-
Dmitry Baryshkov authored
Move pm8058 device nodes to follow the alphanumberic sorting order. Reviewed-by:
-
Dmitry Baryshkov authored
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by:
-
Dmitry Baryshkov authored
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by:
Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Dmitry Baryshkov authored
The PMICs are not a part of the SoC, so move PMICs to separate files and include them from the board files. Suggested-by:
-
Dmitry Baryshkov authored
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Reviewed-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Acked-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Acked-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8921 node labels to start with pm8921_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8058 node labels to start with pm8058_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8018 node labels to start with pm8018_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8921 node labels to start with pm8921_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
As the vendor DTS files were moved to per-vendor subdirs, there no need to use common prefixes. Drop the `qcom-' prefix from PMIC dtsi file. This makes 32-bit qcom/ dts files closer to arm64 ones. Reviewed-by:
-
Dmitry Baryshkov authored
Group file inclusion to follow contemporary practice. Reviewed-by:
-
Dmitry Baryshkov authored
Move sdcc1 device node to follow the alphanumberic sorting order. Reviewed-by:
-
Dmitry Baryshkov authored
Directly use pm8058_keypad to declare keypad properties instead of referencing pm8058 top-level node. Reviewed-by:
-
Dmitry Baryshkov authored
To simplify MSM8960 CDP board file, add label to PMIC keypad node. Reviewed-by:
-
Dmitry Baryshkov authored
The XOADC is present at the address 0x197 rather than just 197. It doesn't change a lot (since the driver hardcodes all register addresses), but the DT should present correct address anyway. Fixes: c4b70883 ("ARM: dts: add XOADC and IIO HWMON to APQ8064") Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
- 13 Nov, 2023 1 commit
-
-
Linus Torvalds authored
-
- 12 Nov, 2023 5 commits
-
-
Miri Korenblit authored
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by:
Damian Tometzki <damian@riscv-rocks.de> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
-
Linus Torvalds authored
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - ctime caching fix (for setxattr) - encryption fix - DNS resolver mount fix - debugging improvements - multichannel fixes including cases where server stops or starts supporting multichannel after mount - reconnect fix - minor cleanups * tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: handle when server stops supporting multichannel cifs: handle when server starts supporting multichannel Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO smb3: allow dumping session and tcon id to improve stats analysis and debugging smb: client: fix mount when dns_resolver key is not available smb3: fix caching of ctime on setxattr smb3: minor cleanup of session handling code cifs: reconnect work should have reference on server struct cifs: do not pass cifs_sb when trying to add channels cifs: account for primary channel in the interface list cifs: distribute channels across interfaces based on speed cifs: handle cases where a channel is closed smb3: more minor cleanups for session handling routines smb3: minor RDMA cleanup cifs: Fix encryption of cleared, but unset rq_iter data buffers
-
