- 15 Jul, 2011 3 commits
-
-
Masami Hiramatsu authored
To support probing module init functions, kprobe-tracer allows user to define a probe on non-existed function when it is given with a module name. This also enables user to set a probe on a function on a specific module, even if a same name (but different) function is locally defined in another module. The module name must be in the front of function name and separated by a ':'. e.g. btrfs:btrfs_init_sysfs Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20110627072656.6528.89970.stgit@fedora15Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Return -ENOENT if probe point doesn't exist, but still returns -EINVAL if both of kprobe->addr and kprobe->symbol_name are specified or both are not specified. Acked-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Masami Hiramatsu authored
Merge redundant enable/disable functions into enable_trace_probe() and disable_trace_probe(). Signed-off-by:
-
- 14 Jul, 2011 7 commits
-
-
Masami Hiramatsu authored
Rename probe_* to trace_probe_* for avoiding namespace confliction. This also fixes improper names of find_probe_event() and cleanup_all_probes() to find_trace_probe() and release_all_trace_probes() respectively. Signed-off-by:
-
Cyrill Gorcunov authored
Instead of hw_nmi_watchdog_set_attr() weak function and appropriate x86_pmu::hw_watchdog_set_attr() call we introduce even alias mechanism which allow us to drop this routines completely and isolate quirks of Netburst architecture inside P4 PMU code only. The main idea remains the same though -- to allow nmi-watchdog and perf top run simultaneously. Note the aliasing mechanism applies to generic PERF_COUNT_HW_CPU_CYCLES event only because arbitrary event (say passed as RAW initially) might have some additional bits set inside ESCR register changing the behaviour of event and we can't guarantee anymore that alias event will give the same result. P.S. Thanks a huge to Don and Steven for for testing and early review. Acked-by:Don Zickus <dzickus@redhat.com> Tested-by:
Cyrill Gorcunov <gorcunov@openvz.org> CC: Ingo Molnar <mingo@elte.hu> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Stephane Eranian <eranian@google.com> CC: Lin Ming <ming.m.lin@intel.com> CC: Arnaldo Carvalho de Melo <acme@redhat.com> CC: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20110708201712.GS23657@sunSigned-off-by:
-
Steven Rostedt authored
Currently the stack trace per event in ftace is only 8 frames. This can be quite limiting and sometimes useless. Especially when the "ignore frames" is wrong and we also use up stack frames for the event processing itself. Change this to be dynamic by adding a percpu buffer that we can write a large stack frame into and then copy into the ring buffer. For interrupts and NMIs that come in while another event is being process, will only get to use the 8 frame stack. That should be enough as the task that it interrupted will have the full stack frame anyway. Requested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sonny Rao authored
While attempting to create a timechart of boot up I found perf didn't tolerate modules being loaded/unloaded. This patch fixes this by reading the file once and then writing the size read at the correct point in the file. It also simplifies the code somewhat. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
Sonny Rao <sonnyrao@chromium.org> Signed-off-by:
Michael Neuling <mikey@neuling.org> Link: http://lkml.kernel.org/r/10011.1310614483@neuling.orgSigned-off-by:
-
Steven Rostedt authored
Archs that do not implement CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST, will fail the dynamic ftrace selftest. The function tracer has a quick 'off' variable that will prevent the call back functions from being called. This variable is called function_trace_stop. In x86, this is implemented directly in the mcount assembly, but for other archs, an intermediate function is used called ftrace_test_stop_func(). In dynamic ftrace, the function pointer variable ftrace_trace_function is used to update the caller code in the mcount caller. But for archs that do not have CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST set, it only calls ftrace_test_stop_func() instead, which in turn calls __ftrace_trace_function. When more than one ftrace_ops is registered, the function it calls is ftrace_ops_list_func(), which will iterate over all registered ftrace_ops and call the callbacks that have their hash matching. The issue happens when two ftrace_ops are registered for different functions and one is then unregistered. The __ftrace_trace_function is then pointed to the remaining ftrace_ops callback function directly. This mean it will be called for all functions that were registered to trace by both ftrace_ops that were registered. This is not an issue for archs with CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST, because the update of ftrace_trace_function doesn't happen until after all functions have been updated, and then the mcount caller is updated. But for those archs that do use the ftrace_test_stop_func(), the update is immediate. The dynamic selftest fails because it hits this situation, and the ftrace_ops that it registers fails to only trace what it was suppose to and instead traces all other functions. The solution is to delay the setting of __ftrace_trace_function until after all the functions have been updated according to the registered ftrace_ops. Also, function_trace_stop is set during the update to prevent function tracing from calling code that is caused by the function tracer itself. Signed-off-by: -
Steven Rostedt authored
Currently, if set_ftrace_filter() is called when the ftrace_ops is active, the function filters will not be updated. They will only be updated when tracing is disabled and re-enabled. Update the functions immediately during set_ftrace_filter(). Signed-off-by: -
Steven Rostedt authored
Whenever the hash of the ftrace_ops is updated, the record counts must be balance. This requires disabling the records that are set in the original hash, and then enabling the records that are set in the updated hash. Moving the update into ftrace_hash_move() removes the bug where the hash was updated but the records were not, which results in ftrace triggering a warning and disabling itself because the ftrace_ops filter is updated while the ftrace_ops was registered, and then the failure happens when the ftrace_ops is unregistered. The current code will not trigger this bug, but new code will. Signed-off-by:
-
- 08 Jul, 2011 2 commits
-
-
Steven Rostedt authored
When I mounted an NFS directory, it caused several modules to be loaded. At the time I was running the preemptirqsoff tracer, and it showed the following output: # tracer: preemptirqsoff # # preemptirqsoff latency trace v1.1.5 on 2.6.33.9-rt30-mrg-test # -------------------------------------------------------------------- # latency: 1177 us, #4/4, CPU#3 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4) # ----------------- # | task: modprobe-19370 (uid:0 nice:0 policy:0 rt_prio:0) # ----------------- # => started at: ftrace_module_notify # => ended at: ftrace_module_notify # # # _------=> CPU# # / _-----=> irqs-off # | / _----=> need-resched # || / _---=> hardirq/softirq # ||| / _--=> preempt-depth # |||| /_--=> lock-depth # |||||/ delay # cmd pid |||||| time | caller # \ / |||||| \ | / modprobe-19370 3d.... 0us!: ftrace_process_locs <-ftrace_module_notify modprobe-19370 3d.... 1176us : ftrace_process_locs <-ftrace_module_notify modprobe-19370 3d.... 1178us : trace_hardirqs_on <-ftrace_module_notify modprobe-19370 3d.... 1178us : <stack trace> => ftrace_process_locs => ftrace_module_notify => notifier_call_chain => __blocking_notifier_call_chain => blocking_notifier_call_chain => sys_init_module => system_call_fastpath That's over 1ms that interrupts are disabled on a Real-Time kernel! Looking at the cause (being the ftrace author helped), I found that the interrupts are disabled before the code modification of mcounts into nops. The interrupts only need to be disabled on start up around this code, not when modules are being loaded. Signed-off-by: -
Steven Rostedt authored
If a function is set to be traced by the set_graph_function, but the option funcgraph-irqs is zero, and the traced function happens to be called from a interrupt, it will not be traced. The point of funcgraph-irqs is to not trace interrupts when we are preempted by an irq, not to not trace functions we want to trace that happen to be *in* a irq. Luckily the current->trace_recursion element is perfect to add a flag to help us be able to trace functions within an interrupt even when we are not tracing interrupts that preempt the trace. Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by:
-
- 07 Jul, 2011 1 commit
-
-
Steven Rostedt authored
I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- 05 Jul, 2011 2 commits
-
-
Ingo Molnar authored
Merge branch 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
-
Anton Blanchard authored
Add an option to perf report/annotate/script to specify which CPUs to operate on. This enables us to take a single system wide profile and analyse each CPU (or group of CPUs) in isolation. This was useful when profiling a multiprocess workload where the bottleneck was on one CPU but this was hidden in the overall profile. Per process and per thread breakdowns didn't help because multiple processes were running on each CPU and no single process consumed an entire CPU. The patch converts the list of CPUs returned by cpu_map__new into a bitmap for fast lookup. I wanted to use -C to be consistent with perf top/record/stat, but unfortunately perf report already uses -C <comms>. v2: Incorporate suggestions from David Ahern: - Added -c to perf script - Check that SAMPLE_CPU is set when -c is used - Update documentation v3: Create perf_session__cpu_bitmap() Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
David Ahern <dsahern@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20110704215750.11647eb9@krytenSigned-off-by:
-
- 04 Jul, 2011 1 commit
-
-
- 03 Jul, 2011 1 commit
-
-
Ingo Molnar authored
Merge branch 'perf/stacktrace' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
-
- 02 Jul, 2011 6 commits
-
-
Frederic Weisbecker authored
rbp is used in SAVE_ARGS_IRQ to save the old stack pointer in order to restore it later in ret_from_intr. It is convenient because we save its value in the irq regs and it's easily restored using the leave instruction. However this is a kind of abuse of the frame pointer which role is to help unwinding the kernel by chaining frames together, each node following the return address to the previous frame. But although we are breaking the frame by changing the stack pointer, there is no preceding return address before the new frame. Hence using the frame pointer to link the two stacks breaks the stack unwinders that find a random value instead of a return address here. There is no workaround that can work in every case. We are using the fixup_bp_irq_link() function to dereference that abused frame pointer in the case of non nesting interrupt (which means stack changed). But that doesn't fix the case of interrupts that don't change the stack (but we still have the unconditional frame link), which is the case of hardirq interrupting softirq. We have no way to detect this transition so the frame irq link is considered as a real frame pointer and the return address is dereferenced but it is still a spurious one. There are two possible results of this: either the spurious return address, a random stack value, luckily belongs to the kernel text and then the unwinding can continue and we just have a weird entry in the stack trace. Or it doesn't belong to the kernel text and unwinding stops there. This is the reason why stacktraces (including perf callchains) on irqs that interrupted softirqs don't work very well. To solve this, we don't save the old stack pointer on rbp anymore but we save it to a scratch register that we push on the new stack and that we pop back later on irq return. This preserves the whole frame chain without spurious return addresses in the middle and drops the need for the horrid fixup_bp_irq_link() workaround. And finally irqs that interrupt softirq are sanely unwinded. Before: 99.81% perf [kernel.kallsyms] [k] perf_pending_event | --- perf_pending_event irq_work_run smp_irq_work_interrupt irq_work_interrupt | |--41.60%-- __read | | | |--99.90%-- create_worker | | bench_sched_messaging | | cmd_bench | | run_builtin | | main | | __libc_start_main | --0.10%-- [...] After: 1.64% swapper [kernel.kallsyms] [k] perf_pending_event | --- perf_pending_event irq_work_run smp_irq_work_interrupt irq_work_interrupt | |--95.00%-- arch_irq_work_raise | irq_work_queue | __perf_event_overflow | perf_swevent_overflow | perf_swevent_event | perf_tp_event | perf_trace_softirq | __do_softirq | call_softirq | do_softirq | irq_exit | | | |--73.68%-- smp_apic_timer_interrupt | | apic_timer_interrupt | | | | | |--96.43%-- amd_e400_idle | | | cpu_idle | | | start_secondary Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jan Beulich <JBeulich@novell.com>
-
Frederic Weisbecker authored
The unwinder backlink in interrupt entry is very useless. It's actually not part of the stack frame chain and thus is never used. Signed-off-by: -
Frederic Weisbecker authored
Just for clarity in the code. Have a first block that handles the frame pointer and a separate one that handles pt_regs pointer and its use. Signed-off-by: -
Frederic Weisbecker authored
The save_regs function that saves the regs on low level irq entry is complicated because of the fact it changes its stack in the middle and also because it manipulates data allocated in the caller frame and accesses there are directly calculated from callee rsp value with the return address in the middle of the way. This complicates the static stack offsets calculation and require more dynamic ones. It also needs a save/restore of the function's return address. To simplify and optimize this, turn save_regs() into a macro. Signed-off-by: -
Frederic Weisbecker authored
When regs are passed to dump_stack(), we fetch the frame pointer from the regs but the stack pointer is taken from the current frame. Thus the frame and stack pointers may not come from the same context. For example this can result in the unwinder to think the context is in irq, due to the current value of the stack, but the frame pointer coming from the regs points to a frame from another place. It then tries to fix up the irq link but ends up dereferencing a random frame pointer that doesn't belong to the irq stack: [ 9131.706906] ------------[ cut here ]------------ [ 9131.707003] WARNING: at arch/x86/kernel/dumpstack_64.c:129 dump_trace+0x2aa/0x330() [ 9131.707003] Hardware name: AMD690VM-FMH [ 9131.707003] Perf: bad frame pointer = 0000000000000005 in callchain [ 9131.707003] Modules linked in: [ 9131.707003] Pid: 1050, comm: perf Not tainted 3.0.0-rc3+ #181 [ 9131.707003] Call Trace: [ 9131.707003] <IRQ> [<ffffffff8104bd4a>] warn_slowpath_common+0x7a/0xb0 [ 9131.707003] [<ffffffff8104be21>] warn_slowpath_fmt+0x41/0x50 [ 9131.707003] [<ffffffff8178b873>] ? bad_to_user+0x6d/0x10be [ 9131.707003] [<ffffffff8100c2da>] dump_trace+0x2aa/0x330 [ 9131.707003] [<ffffffff810107d3>] ? native_sched_clock+0x13/0x50 [ 9131.707003] [<ffffffff8101b164>] perf_callchain_kernel+0x54/0x70 [ 9131.707003] [<ffffffff810d391f>] perf_prepare_sample+0x19f/0x2a0 [ 9131.707003] [<ffffffff810d546c>] __perf_event_overflow+0x16c/0x290 [ 9131.707003] [<ffffffff810d5430>] ? __perf_event_overflow+0x130/0x290 [ 9131.707003] [<ffffffff810107d3>] ? native_sched_clock+0x13/0x50 [ 9131.707003] [<ffffffff8100fbb9>] ? sched_clock+0x9/0x10 [ 9131.707003] [<ffffffff810752e5>] ? T.375+0x15/0x90 [ 9131.707003] [<ffffffff81084da4>] ? trace_hardirqs_on_caller+0x64/0x180 [ 9131.707003] [<ffffffff810817bd>] ? trace_hardirqs_off+0xd/0x10 [ 9131.707003] [<ffffffff810d5764>] perf_event_overflow+0x14/0x20 [ 9131.707003] [<ffffffff810d588c>] perf_swevent_hrtimer+0x11c/0x130 [ 9131.707003] [<ffffffff817821a1>] ? error_exit+0x51/0xb0 [ 9131.707003] [<ffffffff81072e93>] __run_hrtimer+0x83/0x1e0 [ 9131.707003] [<ffffffff810d5770>] ? perf_event_overflow+0x20/0x20 [ 9131.707003] [<ffffffff81073256>] hrtimer_interrupt+0x106/0x250 [ 9131.707003] [<ffffffff812a3bfd>] ? trace_hardirqs_off_thunk+0x3a/0x3c [ 9131.707003] [<ffffffff81024833>] smp_apic_timer_interrupt+0x53/0x90 [ 9131.707003] [<ffffffff81789053>] apic_timer_interrupt+0x13/0x20 [ 9131.707003] <EOI> [<ffffffff817821a1>] ? error_exit+0x51/0xb0 [ 9131.707003] [<ffffffff8178219c>] ? error_exit+0x4c/0xb0 [ 9131.707003] ---[ end trace b2560d4876709347 ]--- Fix this by simply taking the stack pointer from regs->sp when regs are provided. Signed-off-by: -
Frederic Weisbecker authored
In order to prepare for fetching the stack pointer from the regs when possible in dump_trace() instead of taking the local one, save the current stack pointer in perf live regs saving. Signed-off-by:
-
- 01 Jul, 2011 17 commits
-
-
Peter Zijlstra authored
The patch a8b0ca17 ("perf: Remove the nmi parameter from the swevent and overflow interface") missed a spot in the ppc hw_breakpoint code, fix this up so things compile again. Reported-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-09pfip95g88s70iwkxu6nnbt@git.kernel.orgSigned-off-by:
-
Zhengyu He authored
Previously, when you want perf-stat to output the statistics in csv mode, no information of the noise will be printed out. For example right now we output this --repeat information: ./perf stat -r3 -x, sleep 1 1.164789,task-clock 8,context-switches 0,CPU-migrations 219,page-faults 3337800,cycles With this patch, the output will be appended with an additional entry for the noise value: ./perf stat -r3 -x, sleep 1 1.164789,task-clock,3.75% 8,context-switches,75.00% 0,CPU-migrations,100.00% 219,page-faults,0.00% 3337800,cycles,3.36% Signed-off-by:
Zhengyu He <zhengyuh@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Stephane Eranian <eranian@google.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1308861942-4945-1-git-send-email-zhengyuh@google.comSigned-off-by:
-
Ingo Molnar authored
Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
-
Avi Kivity authored
KVM needs one-shot samples, since a PMC programmed to -X will fire after X events and then again after 2^40 events (i.e. variable period). Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
Avi Kivity authored
The v1 PMU does not have any fixed counters. Using the v2 constraints, which do have fixed counters, causes an additional choice to be present in the weight calculation, but not when actually scheduling the event, leading to an event being not scheduled at all. Signed-off-by:
-
Avi Kivity authored
The perf_event overflow handler does not receive any caller-derived argument, so many callers need to resort to looking up the perf_event in their local data structure. This is ugly and doesn't scale if a single callback services many perf_events. Fix by adding a context parameter to perf_event_create_kernel_counter() (and derived hardware breakpoints APIs) and storing it in the perf_event. The field can be accessed from the callback as event->overflow_handler_context. All callers are updated. Signed-off-by:
-
Peter Zijlstra authored
Add a NODE level to the generic cache events which is used to measure local vs remote memory accesses. Like all other cache events, an ACCESS is HIT+MISS, if there is no way to distinguish between reads and writes do reads only etc.. The below needs filling out for !x86 (which I filled out with unsupported events). I'm fairly sure ARM can leave it like that since it doesn't strike me as an architecture that even has NUMA support. SH might have something since it does appear to have some NUMA bits. Sparc64, PowerPC and MIPS certainly want a good look there since they clearly are NUMA capable. Signed-off-by:
-
Peter Zijlstra authored
Since the OFFCORE registers are fully symmetric, try the other one when the specified one is already in use. Signed-off-by:
-
Stephane Eranian authored
This patch adds Intel Sandy Bridge offcore_response support by providing the low-level constraint table for those events. On Sandy Bridge, there are two offcore_response events. Each uses its own dedictated extra register. But those registers are NOT shared between sibling CPUs when HT is on unlike Nehalem/Westmere. They are always private to each CPU. But they still need to be controlled within an event group. All events within an event group must use the same value for the extra MSR. That's not controlled by the second patch in this series. Furthermore on Sandy Bridge, the offcore_response events have NO counter constraints contrary to what the official documentation indicates, so drop the events from the contraint table. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
The validate_group() function needs to validate events with extra shared regs. Within an event group, only events with the same value for the extra reg can co-exist. This was not checked by validate_group() because it was missing the shared_regs logic. This patch changes the allocation of the fake cpuc used for validation to also point to a fake shared_regs structure such that group events be properly testing. It modifies __intel_shared_reg_get_constraints() to use spin_lock_irqsave() to avoid lockdep issues. Signed-off-by:
-
Stephane Eranian authored
This patch improves the code managing the extra shared registers used for offcore_response events on Intel Nehalem/Westmere. The idea is to use static allocation instead of dynamic allocation. This simplifies greatly the get and put constraint routines for those events. The patch also renames per_core to shared_regs because the same data structure gets used whether or not HT is on. When HT is off, those events still need to coordination because they use a extra MSR that has to be shared within an event group. Signed-off-by:
-
Peter Zijlstra authored
Since only samples call perf_output_sample() its much saner (and more correct) to put the sample logic in there than in the perf_output_begin()/perf_output_end() pair. Saves a useless argument, reduces conditionals and shrinks struct perf_output_handle, win! Signed-off-by:
-
Peter Zijlstra authored
The nmi parameter indicated if we could do wakeups from the current context, if not, we would set some state and self-IPI and let the resulting interrupt do the wakeup. For the various event classes: - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from the PMI-tail (ARM etc.) - tracepoint: nmi=0; since tracepoint could be from NMI context. - software: nmi=[0,1]; some, like the schedule thing cannot perform wakeups, and hence need 0. As one can see, there is very little nmi=1 usage, and the down-side of not using it is that on some platforms some software events can have a jiffy delay in wakeup (when arch_irq_work_raise isn't implemented). The up-side however is that we can remove the nmi parameter and save a bunch of conditionals in fast paths. Signed-off-by: -
Cyrill Gorcunov authored
Due to restriction and specifics of Netburst PMU we need a separated event for NMI watchdog. In particular every Netburst event consumes not just a counter and a config register, but also an additional ESCR register. Since ESCR registers are grouped upon counters (i.e. if ESCR is occupied for some event there is no room for another event to enter until its released) we need to pick up the "least" used ESCR (or the most available one) for nmi-watchdog purposes -- so MSR_P4_CRU_ESCR2/3 was chosen. With this patch nmi-watchdog and perf top should be able to run simultaneously. Signed-off-by:
-
Eric B Munson authored
The event tracing infrastructure exposes two timers which should be updated each time the value of the counter is updated. Currently, these counters are only updated when userspace calls read() on the fd associated with an event. This means that counters which are read via the mmap'd page exclusively never have their timers updated. This patch adds ensures that the timers are updated each time the values in the mmap'd page are updated. Signed-off-by:
Eric B Munson <emunson@mgebm.net> Signed-off-by:
-
Eric B Munson authored
Take the timer calculation from perf_output_read and move it to a helper function for any place that needs timer values but cannot take the ctx->lock. Signed-off-by:
-
Eric B Munson authored
Signed-off-by:
-
