clang points out with hundreds of warnings that the bitrev macros have a
problem with constant input:

  drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization
        [-Werror,-Wuninitialized]
          u8 crc = bitrev8(data->val_status & 0x0F);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8'
          __constant_bitrev8(__x) :                       \
          ~~~~~~~~~~~~~~~~~~~^~~~
  include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8'
          u8 __x = x;                     \
             ~~~   ^

Both the bitrev and the __constant_bitrev macros use an internal
variable named __x, which goes horribly wrong when passing one to the
other.

The obvious fix is to rename one of the variables, so this adds an extra
'_'.

It seems we got away with this because

 - there are only a few drivers using bitrev macros

 - usually there are no constant arguments to those

 - when they are constant, they tend to be either 0 or (unsigned)-1
   (drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and
   give the correct result by pure chance.

In fact, the only driver that I could find that gets different results
with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver
for fairly rare hardware (adding the maintainer to Cc for testing).

Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de
Fixes: 556d2f05 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Yalin Wang <yalin.wang@sonymobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 2d4f5671 ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.

kernel_init
  kvm_guest_init
    kvm_free_tmp
      free_reserved_area
        free_unref_page
          free_unref_page_prepare

With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel.  As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.

This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.

Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Qian Cai <cai@lca.pw>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A recent optimization in Clang (r355672) lowers comparisons of the
return value of memcmp against zero to comparisons of the return value
of bcmp against zero.  This helps some platforms that implement bcmp
more efficiently than memcmp.  glibc simply aliases bcmp to memcmp, but
an optimized implementation is in the works.

This results in linkage failures for all targets with Clang due to the
undefined symbol.  For now, just implement bcmp as a tailcail to memcmp
to unbreak the build.  This routine can be further optimized in the
future.

Other ideas discussed:

 * A weak alias was discussed, but breaks for architectures that define
   their own implementations of memcmp since aliases to declarations are
   not permitted (only definitions). Arch-specific memcmp
   implementations typically declare memcmp in C headers, but implement
   them in assembly.

 * -ffreestanding also is used sporadically throughout the kernel.

 * -fno-builtin-bcmp doesn't work when doing LTO.

Link: https://bugs.llvm.org/show_bug.cgi?id=41035
Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp
Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13
Link: https://github.com/ClangBuiltLinux/linux/issues/416
Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.comSigned-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: James Y Knight <jyknight@google.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull mm/compaction fixes from Mel Gorman:
 "The merge window for 5.1 introduced a number of compaction-related
  patches. with intermittent reports of corruption and functional
  issues. The bugs are due to sloopy checking of zone boundaries and a
  corner case where invalid indexes are used to access the free lists.

  Reports are not common but at least two users and 0-day have tripped
  over them. There is a chance that one of the syzbot reports are
  related but it has not been confirmed properly.

  The normal submission path is with Andrew but there have been some
  delays and I consider them urgent enough that they should be picked up
  before RC4 to avoid duplicate reports.

  All of these have been successfully tested on older RC windows. This
  will make this branch look like a rebase but in fact, they've simply
  been lifted again from Andrew's tree and placed on a fresh branch.
  I've no reason to believe that this has invalidated the testing given
  the lack of change in compaction and the nature of the fixes"

* tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux:
  mm/compaction.c: abort search if isolation fails
  mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints

The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.

After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.

Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Pretty quiet week, just some amdgpu and i915 fixes.

  i915:
   - deadlock fix
   - gvt fixes

  amdgpu:
   - PCIE dpm feature fix
   - Powerplay fixes"

* tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
  drm/i915/gvt: Correct the calculation of plane size
  drm/amdgpu: remove unnecessary rlc reset function on gfx9
  drm/i915: Always backoff after a drm_modeset_lock() deadlock
  drm/i915/gvt: do not let pin count of shadow mm go negative
  drm/i915/gvt: do not deliver a workload if its creation fails
  drm/amd/display: VBIOS can't be light up HDMI when restart system
  drm/amd/powerplay: fix possible hang with 3+ 4K monitors
  drm/amd/powerplay: correct data type to avoid overflow
  drm/amd/powerplay: add ECC feature bit
  drm/amd/amdgpu: fix PCIe dpm feature issue (v3)

Pull networking fixes from David Miller:

 1) Several hash table refcount fixes in batman-adv, from Sven
    Eckelmann.

 2) Use after free in bpf_evict_inode(), from Daniel Borkmann.

 3) Fix mdio bus registration in ixgbe, from Ivan Vecera.

 4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni.

 5) ila rhashtable corruption fix from Herbert Xu.

 6) Don't allow upper-devices to be added to vrf devices, from Sabrina
    Dubroca.

 7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork.

 8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype,
    from Alexander Lobakin.

 9) Missing IDR checks in mlx5 driver, from Aditya Pakki.

10) Fix false connection termination in ktls, from Jakub Kicinski.

11) Work around some ASPM issues with r8169 by disabling rx interrupt
    coalescing on certain chips. From Heiner Kallweit.

12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo
    Abeni.

13) Fully initialize sockaddr_in structures in SCTP, from Xin Long.

14) Various BPF flow dissector fixes from Stanislav Fomichev.

15) Divide by zero in act_sample, from Davide Caratti.

16) Fix bridging multicast regression introduced by rhashtable
    conversion, from Nikolay Aleksandrov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  ibmvnic: Fix completion structure initialization
  ipv6: sit: reset ip header pointer in ipip6_rcv
  net: bridge: always clear mcast matching struct on reports and leaves
  libcxgb: fix incorrect ppmax calculation
  vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
  sch_cake: Make sure we can write the IP header before changing DSCP bits
  sch_cake: Use tc_skb_protocol() helper for getting packet protocol
  tcp: Ensure DCTCP reacts to losses
  net/sched: act_sample: fix divide by zero in the traffic path
  net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
  net: hns: Fix sparse: some warnings in HNS drivers
  net: hns: Fix WARNING when remove HNS driver with SMMU enabled
  net: hns: fix ICMP6 neighbor solicitation messages discard problem
  net: hns: Fix probabilistic memory overwrite when HNS driver initialized
  net: hns: Use NAPI_POLL_WEIGHT for hns driver
  net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
  flow_dissector: rst'ify documentation
  ipv6: Fix dangling pointer when ipv6 fragment
  net-gro: Fix GRO flush when receiving a GSO packet.
  flow_dissector: document BPF flow dissector environment
  ...

Fix device initialization completion handling for vNIC adapters.
Initialize the completion structure on probe and reinitialize when needed.
This also fixes a race condition during kdump where the driver can attempt
to access the completion struct before it is initialized:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0000000081acbe0
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop
CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1
NIP:  c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900
REGS: c000000027f3f990 TRAP: 0300   Not tainted  (4.18.0-64.el8.ppc64le)
MSR:  800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288  XER: 00000006
CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1
GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58
GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4
GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28
GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100
GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006
GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000
GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003
GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58
NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100
LR [c0000000081ad964] complete+0x64/0xa0
Call Trace:
[c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable)
[c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0
[c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic]
[c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic]
[c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0
[c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400
[c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0
[c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210
[c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24
[c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130
[c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipip6 tunnels run iptunnel_pull_header on received skbs. This can
determine the following use-after-free accessing iph pointer since
the packet will be 'uncloned' running pskb_expand_head if it is a
cloned gso skb (e.g if the packet has been sent though a veth device)

[  706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit]
[  706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/=
[  706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016
[  706.771839] Call trace:
[  706.801159]  dump_backtrace+0x0/0x2f8
[  706.845079]  show_stack+0x24/0x30
[  706.884833]  dump_stack+0xe0/0x11c
[  706.925629]  print_address_description+0x68/0x260
[  706.982070]  kasan_report+0x178/0x340
[  707.025995]  __asan_report_load1_noabort+0x30/0x40
[  707.083481]  ipip6_rcv+0x1678/0x16e0 [sit]
[  707.132623]  tunnel64_rcv+0xd4/0x200 [tunnel4]
[  707.185940]  ip_local_deliver_finish+0x3b8/0x988
[  707.241338]  ip_local_deliver+0x144/0x470
[  707.289436]  ip_rcv_finish+0x43c/0x14b0
[  707.335447]  ip_rcv+0x628/0x1138
[  707.374151]  __netif_receive_skb_core+0x1670/0x2600
[  707.432680]  __netif_receive_skb+0x28/0x190
[  707.482859]  process_backlog+0x1d0/0x610
[  707.529913]  net_rx_action+0x37c/0xf68
[  707.574882]  __do_softirq+0x288/0x1018
[  707.619852]  run_ksoftirqd+0x70/0xa8
[  707.662734]  smpboot_thread_fn+0x3a4/0x9e8
[  707.711875]  kthread+0x2c8/0x350
[  707.750583]  ret_from_fork+0x10/0x18

[  707.811302] Allocated by task 16982:
[  707.854182]  kasan_kmalloc.part.1+0x40/0x108
[  707.905405]  kasan_kmalloc+0xb4/0xc8
[  707.948291]  kasan_slab_alloc+0x14/0x20
[  707.994309]  __kmalloc_node_track_caller+0x158/0x5e0
[  708.053902]  __kmalloc_reserve.isra.8+0x54/0xe0
[  708.108280]  __alloc_skb+0xd8/0x400
[  708.150139]  sk_stream_alloc_skb+0xa4/0x638
[  708.200346]  tcp_sendmsg_locked+0x818/0x2b90
[  708.251581]  tcp_sendmsg+0x40/0x60
[  708.292376]  inet_sendmsg+0xf0/0x520
[  708.335259]  sock_sendmsg+0xac/0xf8
[  708.377096]  sock_write_iter+0x1c0/0x2c0
[  708.424154]  new_sync_write+0x358/0x4a8
[  708.470162]  __vfs_write+0xc4/0xf8
[  708.510950]  vfs_write+0x12c/0x3d0
[  708.551739]  ksys_write+0xcc/0x178
[  708.592533]  __arm64_sys_write+0x70/0xa0
[  708.639593]  el0_svc_handler+0x13c/0x298
[  708.686646]  el0_svc+0x8/0xc

[  708.739019] Freed by task 17:
[  708.774597]  __kasan_slab_free+0x114/0x228
[  708.823736]  kasan_slab_free+0x10/0x18
[  708.868703]  kfree+0x100/0x3d8
[  708.905320]  skb_free_head+0x7c/0x98
[  708.948204]  skb_release_data+0x320/0x490
[  708.996301]  pskb_expand_head+0x60c/0x970
[  709.044399]  __iptunnel_pull_header+0x3b8/0x5d0
[  709.098770]  ipip6_rcv+0x41c/0x16e0 [sit]
[  709.146873]  tunnel64_rcv+0xd4/0x200 [tunnel4]
[  709.200195]  ip_local_deliver_finish+0x3b8/0x988
[  709.255596]  ip_local_deliver+0x144/0x470
[  709.303692]  ip_rcv_finish+0x43c/0x14b0
[  709.349705]  ip_rcv+0x628/0x1138
[  709.388413]  __netif_receive_skb_core+0x1670/0x2600
[  709.446943]  __netif_receive_skb+0x28/0x190
[  709.497120]  process_backlog+0x1d0/0x610
[  709.544169]  net_rx_action+0x37c/0xf68
[  709.589131]  __do_softirq+0x288/0x1018

[  709.651938] The buggy address belongs to the object at ffffe01b6bd85580
                which belongs to the cache kmalloc-1024 of size 1024
[  709.804356] The buggy address is located 117 bytes inside of
                1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980)
[  709.946340] The buggy address belongs to the page:
[  710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0
[  710.099914] flags: 0xfffff8000000100(slab)
[  710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600
[  710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000
[  710.334966] page dumped because: kasan: bad access detected

Fix it resetting iph pointer after iptunnel_pull_header

Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap")
Tested-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "I dropped the ball a bit here: these patches should all probably have
  been part of rc2, but I wanted to get around to properly testing them
  in the various configurations (qemu32, qeum64, unleashed) first.

  Unfortunately I've been traveling and didn't have time to actually do
  that, but since these fix concrete bugs and pass my old set of tests I
  don't want to delay the fixes any longer.

  There are four independent fixes here:

   - A fix for the rv32 port that corrects the 64-bit user accesor's
     fixup label address.

   - A fix for a regression introduced during the merge window that
     broke medlow configurations at run time. This patch also includes a
     fix that disables ftrace for the same set of functions, which was
     found by inspection at the same time.

   - A modification of the memory map to avoid overlapping the FIXMAP
     and VMALLOC regions on systems with small memory maps.

   - A fix to the module handling code to use the correct syntax for
     probing Kconfig entries.

  These have passed my standard test flow, but I didn't have time to
  expand that testing like I said I would"

* tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW)
  RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area
  RISC-V: Always compile mm/init.c with cmodel=medany and notrace
  riscv: fix accessing 8-byte variable from RV32

We need to be careful and always zero the whole br_ip struct when it is
used for matching since the rhashtable change. This patch fixes all the
places which didn't properly clear it which in turn might've caused
mismatches.

Thanks for the great bug report with reproducing steps and bisection.

Steps to reproduce (from the bug report):
ip link add br0 type bridge mcast_querier 1
ip link set br0 up

ip link add v2 type veth peer name v3
ip link set v2 master br0
ip link set v2 up
ip link set v3 up
ip addr add 3.0.0.2/24 dev v3

ip netns add test
ip link add v1 type veth peer name v1 netns test
ip link set v1 master br0
ip link set v1 up
ip -n test link set v1 up
ip -n test addr add 3.0.0.1/24 dev v1

# Multicast receiver
ip netns exec test socat
UDP4-RECVFROM:5588,ip-add-membership=224.224.224.224:3.0.0.1,fork -

# Multicast sender
echo hello | nc -u -s 3.0.0.2 224.224.224.224 5588

Reported-by: liam.mcbirnie@boeing.com
Fixes: 19e3a9c9 ("net: bridge: convert multicast to generic rhashtable")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management fixes from Rafael Wysocki:
 "These fix up the intel_pstate driver after recent changes to prevent
  it from printing pointless messages and update the turbostat utility
  (mostly fixes and new hardware support).

  Specifics:

   - Make intel_pstate only load on Intel processors and prevent it from
     printing pointless failure messages (Borislav Petkov).

   - Update the turbostat utility:
      * Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava).
      * Support for AMD Fam 17h (Zen) RAPL and package power (Calvin
        Walton).
      * Support for Intel Icelake and for systems with more than one die
        per package (Len Brown).
      * Cleanups (Len Brown)"

* tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/intel_pstate: Load only on Intel hardware
  tools/power turbostat: update version number
  tools/power turbostat: Warn on bad ACPI LPIT data
  tools/power turbostat: Add checks for failure of fgets() and fscanf()
  tools/power turbostat: Also read package power on AMD F17h (Zen)
  tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
  tools/power turbostat: Do not display an error on systems without a cpufreq driver
  tools/power turbostat: Add Die column
  tools/power turbostat: Add Icelake support
  tools/power turbostat: Cleanup CNL-specific code
  tools/power turbostat: Cleanup CC3-skip code
  tools/power turbostat: Restore ability to execute in topology-order

Pull ACPI fix from Rafael Wysocki:
 "Prevent stale GPE events from triggering spurious system wakeups from
  suspend-to-idle (Furquan Shaikh)"

* tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Clear status of GPEs before enabling them

Merge tag 'drm-intel-fixes-2019-04-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Only one fix for DSC (backoff after drm_modeset_lock deadlock)
and GVT's fixes including vGPU display plane size calculation,
shadow mm pin count, error recovery path for workload create
and one kerneldoc fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com

Pull mfd fixes from Lee Jones:

 - Fix failed reads due to enabled IRQs when suspended; twl-core

 - Fix driver registration when using DT; sprd-sc27xx-spi

 - Fix `make allyesconfig` on x86_64; SUN6I_PRCM

* tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: sun6i-prcm: Allow to compile with COMPILE_TEST
  mfd: sc27xx: Use SoC compatible string for PMIC devices
  mfd: twl-core: Disable IRQ while suspended

Fixes for 5.1:
- Fix for pcie dpm
- Powerplay fixes for vega20
- Fix vbios display on reboot if driver display state is retained
- Gfx9 resume robustness fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404042939.3386-1-alexander.deucher@amd.com

BITS_TO_LONGS() uses DIV_ROUND_UP() because of
this ppmax value can be greater than available
per cpu page pods.

This patch removes BITS_TO_LONGS() to fix this
issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Way back in 3c9c36bc the
ndo_fcoe_get_wwn pointer was switched from depending on CONFIG_FCOE to
CONFIG_LIBFCOE in order to allow building FCoE support into the bnx2x
driver and used by bnx2fc without including the generic software fcoe
module.

But, FCoE is generally used over an 802.1q VLAN, and the implementation
of ndo_fcoe_get_wwn in the 8021q module was not similarly changed.  The
result is that if CONFIG_FCOE is disabled, then bnz2fc cannot make a
call to ndo_fcoe_get_wwn through the 8021q interface to the underlying
bnx2x interface.  The bnx2fc driver then falls back to a potentially
different mapping of Ethernet MAC to Fibre Channel WWN, creating an
incompatibility with the fabric and target configurations when compared
to the WWNs used by pre-boot firmware and differently-configured
kernels.

So make the conditional inclusion of FCoE code in 8021q match the
conditional inclusion in netdevice.h
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-04-04

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Batch of fixes to the existing BPF flow dissector API to support
   calling BPF programs from the eth_get_headlen context (support for
   latter is planned to be added in bpf-next), from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

* acpica:
  ACPICA: Clear status of GPEs before enabling them

* pm-tools:
  tools/power turbostat: update version number
  tools/power turbostat: Warn on bad ACPI LPIT data
  tools/power turbostat: Add checks for failure of fgets() and fscanf()
  tools/power turbostat: Also read package power on AMD F17h (Zen)
  tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
  tools/power turbostat: Do not display an error on systems without a cpufreq driver
  tools/power turbostat: Add Die column
  tools/power turbostat: Add Icelake support
  tools/power turbostat: Cleanup CNL-specific code
  tools/power turbostat: Cleanup CC3-skip code
  tools/power turbostat: Restore ability to execute in topology-order

Toke Høiland-Jørgensen says:

====================
sched: A few small fixes for sch_cake

Kevin noticed a few issues with the way CAKE reads the skb protocol and the IP
diffserv fields. This series fixes those two issues, and should probably go to
in 4.19 as well. However, the previous refactoring patch means they don't apply
as-is; I can send a follow-up directly to stable if that's OK with you?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is not actually any guarantee that the IP headers are valid before we
access the DSCP bits of the packets. Fix this using the same approach taken
in sch_dsmark.
Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We shouldn't be using skb->protocol directly as that will miss cases with
hardware-accelerated VLAN tags. Use the helper instead to get the right
protocol number.
Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC8257 §3.5 explicitly states that "A DCTCP sender MUST react to
loss episodes in the same way as conventional TCP".

Currently, Linux DCTCP performs no cwnd reduction when losses
are encountered. Optionally, the dctcp_clamp_alpha_on_loss resets
alpha to its maximal value if a RTO happens. This behavior
is sub-optimal for at least two reasons: i) it ignores losses
triggering fast retransmissions; and ii) it causes unnecessary large
cwnd reduction in the future if the loss was isolated as it resets
the historical term of DCTCP's alpha EWMA to its maximal value (i.e.,
denoting a total congestion). The second reason has an especially
noticeable effect when using DCTCP in high BDP environments, where
alpha normally stays at low values.

This patch replace the clamping of alpha by setting ssthresh to
half of cwnd for both fast retransmissions and RTOs, at most once
per RTT. Consequently, the dctcp_clamp_alpha_on_loss module parameter
has been removed.

The table below shows experimental results where we measured the
drop probability of a PIE AQM (not applying ECN marks) at a
bottleneck in the presence of a single TCP flow with either the
alpha-clamping option enabled or the cwnd halving proposed by this
patch. Results using reno or cubic are given for comparison.

                          |  Link   |   RTT    |    Drop
                 TCP CC   |  speed  | base+AQM | probability
        ==================|=========|==========|============
                    CUBIC |  40Mbps |  7+20ms  |    0.21%
                     RENO |         |          |    0.19%
        DCTCP-CLAMP-ALPHA |         |          |   25.80%
         DCTCP-HALVE-CWND |         |          |    0.22%
        ------------------|---------|----------|------------
                    CUBIC | 100Mbps |  7+20ms  |    0.03%
                     RENO |         |          |    0.02%
        DCTCP-CLAMP-ALPHA |         |          |   23.30%
         DCTCP-HALVE-CWND |         |          |    0.04%
        ------------------|---------|----------|------------
                    CUBIC | 800Mbps |   1+1ms  |    0.04%
                     RENO |         |          |    0.05%
        DCTCP-CLAMP-ALPHA |         |          |   18.70%
         DCTCP-HALVE-CWND |         |          |    0.06%

We see that, without halving its cwnd for all source of losses,
DCTCP drives the AQM to large drop probabilities in order to keep
the queue length under control (i.e., it repeatedly faces RTOs).
Instead, if DCTCP reacts to all source of losses, it can then be
controlled by the AQM using similar drop levels than cubic or reno.
Signed-off-by: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Bob Briscoe <research@bobbriscoe.net>
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Andrew Shewmaker <agshew@gmail.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

the control path of 'sample' action does not validate the value of 'rate'
provided by the user, but then it uses it as divisor in the traffic path.
Validate it in tcf_sample_init(), and return -EINVAL with a proper extack
message in case that value is zero, to fix a splat with the script below:

 # tc f a dev test0 egress matchall action sample rate 0 group 1 index 2
 # tc -s a s action sample
 total acts 1

         action order 0: sample rate 1/0 group 1 pipe
          index 2 ref 1 bind 1 installed 19 sec used 19 sec
         Action statistics:
         Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
         backlog 0b 0p requeues 0
 # ping 192.0.2.1 -I test0 -c1 -q

 divide error: 0000 [#1] SMP PTI
 CPU: 1 PID: 6192 Comm: ping Not tainted 5.1.0-rc2.diag2+ #591
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_sample_act+0x9e/0x1e0 [act_sample]
 Code: 6a f1 85 c0 74 0d 80 3d 83 1a 00 00 00 0f 84 9c 00 00 00 4d 85 e4 0f 84 85 00 00 00 e8 9b d7 9c f1 44 8b 8b e0 00 00 00 31 d2 <41> f7 f1 85 d2 75 70 f6 85 83 00 00 00 10 48 8b 45 10 8b 88 08 01
 RSP: 0018:ffffae320190ba30 EFLAGS: 00010246
 RAX: 00000000b0677d21 RBX: ffff8af1ed9ec000 RCX: 0000000059a9fe49
 RDX: 0000000000000000 RSI: 000000000c7e33b7 RDI: ffff8af23daa0af0
 RBP: ffff8af1ee11b200 R08: 0000000074fcaf7e R09: 0000000000000000
 R10: 0000000000000050 R11: ffffffffb3088680 R12: ffff8af232307f80
 R13: 0000000000000003 R14: ffff8af1ed9ec000 R15: 0000000000000000
 FS:  00007fe9c6d2f740(0000) GS:ffff8af23da80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fff6772f000 CR3: 00000000746a2004 CR4: 00000000001606e0
 Call Trace:
  tcf_action_exec+0x7c/0x1c0
  tcf_classify+0x57/0x160
  __dev_queue_xmit+0x3dc/0xd10
  ip_finish_output2+0x257/0x6d0
  ip_output+0x75/0x280
  ip_send_skb+0x15/0x40
  raw_sendmsg+0xae3/0x1410
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x60/0x210
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [...]
  Kernel panic - not syncing: Fatal exception in interrupt

Add a TDC selftest to document that 'rate' is now being validated.
Reported-by: Matteo Croce <mcroce@redhat.com>
Fixes: 5c5670fa ("net/sched: Introduce sample tc action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Yotam Gigi <yotam.gi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a bpf program is uploaded, the driver computes the number of
xdp tx queues resulting in the allocation of additional qsets.
Starting from commit '2ecbe4f4 ("net: thunderx: replace global
nicvf_rx_mode_wq work queue for all VFs to private for each of them")'
the driver runs link state polling for each VF resulting in the
following NULL pointer dereference:

[   56.169256] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[   56.178032] Mem abort info:
[   56.180834]   ESR = 0x96000005
[   56.183877]   Exception class = DABT (current EL), IL = 32 bits
[   56.189792]   SET = 0, FnV = 0
[   56.192834]   EA = 0, S1PTW = 0
[   56.195963] Data abort info:
[   56.198831]   ISV = 0, ISS = 0x00000005
[   56.202662]   CM = 0, WnR = 0
[   56.205619] user pgtable: 64k pages, 48-bit VAs, pgdp = 0000000021f0c7a0
[   56.212315] [0000000000000020] pgd=0000000000000000, pud=0000000000000000
[   56.219094] Internal error: Oops: 96000005 [#1] SMP
[   56.260459] CPU: 39 PID: 2034 Comm: ip Not tainted 5.1.0-rc3+ #3
[   56.266452] Hardware name: GIGABYTE R120-T33/MT30-GS1, BIOS T49 02/02/2018
[   56.273315] pstate: 80000005 (Nzcv daif -PAN -UAO)
[   56.278098] pc : __ll_sc___cmpxchg_case_acq_64+0x4/0x20
[   56.283312] lr : mutex_lock+0x2c/0x50
[   56.286962] sp : ffff0000219af1b0
[   56.290264] x29: ffff0000219af1b0 x28: ffff800f64de49a0
[   56.295565] x27: 0000000000000000 x26: 0000000000000015
[   56.300865] x25: 0000000000000000 x24: 0000000000000000
[   56.306165] x23: 0000000000000000 x22: ffff000011117000
[   56.311465] x21: ffff800f64dfc080 x20: 0000000000000020
[   56.316766] x19: 0000000000000020 x18: 0000000000000001
[   56.322066] x17: 0000000000000000 x16: ffff800f2e077080
[   56.327367] x15: 0000000000000004 x14: 0000000000000000
[   56.332667] x13: ffff000010964438 x12: 0000000000000002
[   56.337967] x11: 0000000000000000 x10: 0000000000000c70
[   56.343268] x9 : ffff0000219af120 x8 : ffff800f2e077d50
[   56.348568] x7 : 0000000000000027 x6 : 000000062a9d6a84
[   56.353869] x5 : 0000000000000000 x4 : ffff800f2e077480
[   56.359169] x3 : 0000000000000008 x2 : ffff800f2e077080
[   56.364469] x1 : 0000000000000000 x0 : 0000000000000020
[   56.369770] Process ip (pid: 2034, stack limit = 0x00000000c862da3a)
[   56.376110] Call trace:
[   56.378546]  __ll_sc___cmpxchg_case_acq_64+0x4/0x20
[   56.383414]  drain_workqueue+0x34/0x198
[   56.387247]  nicvf_open+0x48/0x9e8 [nicvf]
[   56.391334]  nicvf_open+0x898/0x9e8 [nicvf]
[   56.395507]  nicvf_xdp+0x1bc/0x238 [nicvf]
[   56.399595]  dev_xdp_install+0x68/0x90
[   56.403333]  dev_change_xdp_fd+0xc8/0x240
[   56.407333]  do_setlink+0x8e0/0xbe8
[   56.410810]  __rtnl_newlink+0x5b8/0x6d8
[   56.414634]  rtnl_newlink+0x54/0x80
[   56.418112]  rtnetlink_rcv_msg+0x22c/0x2f8
[   56.422199]  netlink_rcv_skb+0x60/0x120
[   56.426023]  rtnetlink_rcv+0x28/0x38
[   56.429587]  netlink_unicast+0x1c8/0x258
[   56.433498]  netlink_sendmsg+0x1b4/0x350
[   56.437410]  sock_sendmsg+0x4c/0x68
[   56.440887]  ___sys_sendmsg+0x240/0x280
[   56.444711]  __sys_sendmsg+0x68/0xb0
[   56.448275]  __arm64_sys_sendmsg+0x2c/0x38
[   56.452361]  el0_svc_handler+0x9c/0x128
[   56.456186]  el0_svc+0x8/0xc
[   56.459056] Code: 35ffff91 2a1003e0 d65f03c0 f9800011 (c85ffc10)
[   56.465166] ---[ end trace 4a57fdc27b0a572c ]---
[   56.469772] Kernel panic - not syncing: Fatal exception

Fix it by checking nicvf_rx_mode_wq pointer in nicvf_open and nicvf_stop

Fixes: 2ecbe4f4 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them")
Fixes: 2c632ad8 ("net: thunderx: move link state polling function to VF")
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yonglong Liu says:

====================
net: hns: bugfixes for HNS Driver

This patchset fix some bugs that were found in the test of
various scenarios, or identify by KASAN/sparse.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are some sparse warnings in the HNS drivers:

warning: incorrect type in assignment (different address spaces)
    expected void [noderef] <asn:2> *io_base
    got void *vaddr
warning: cast removes address space '<asn:2>' of expression
[...]

Add __iomem and change all the u8 __iomem to void __iomem to
fix these kind of  warnings.

warning: incorrect type in argument 1 (different address spaces)
    expected void [noderef] <asn:2> *base
    got unsigned char [usertype] *base_addr
warning: cast to restricted __le16
warning: incorrect type in assignment (different base types)
    expected unsigned int [usertype] tbl_tcam_data_high
    got restricted __le32 [usertype]
warning: cast to restricted __le32
[...]

These variables used u32/u16 as their type, and finally as a
parameter of writel(), writel() will do the cpu_to_le32 coversion
so remove the little endian covert code to fix these kind of warnings.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When enable SMMU, remove HNS driver will cause a WARNING:

[  141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[  141.954673] Modules linked in: hns_enet_drv(-)
[  141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G        W         5.0.0-rc1-28723-gb729c57de95c-dirty #32
[  141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[  142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[  142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[  142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[  142.027066] sp : ffff000013533b90
[  142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[  142.044420] x27: 0000000000000000 x26: 0000000000000000
[  142.055113] x25: 0000000056000000 x24: 0000000000000015
[  142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[  142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[  142.087192] x19: 0000000000001000 x18: 0000000000000007
[  142.097885] x17: 000000000000000e x16: 0000000000000001
[  142.108578] x15: 0000000000000019 x14: 363139343a70616d
[  142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[  142.129963] x11: 00000000ffffffff x10: 0000000000000006
[  142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[  142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[  142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[  142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[  142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[  142.194120] Call trace:
[  142.199030]  __iommu_dma_unmap+0xc0/0xc8
[  142.206920]  iommu_dma_unmap_page+0x20/0x28
[  142.215335]  __iommu_unmap_page+0x40/0x60
[  142.223399]  hnae_unmap_buffer+0x110/0x134
[  142.231639]  hnae_free_desc+0x6c/0x10c
[  142.239177]  hnae_fini_ring+0x14/0x34
[  142.246540]  hnae_fini_queue+0x2c/0x40
[  142.254080]  hnae_put_handle+0x38/0xcc
[  142.261619]  hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[  142.272312]  platform_drv_remove+0x24/0x64
[  142.280552]  device_release_driver_internal+0x17c/0x20c
[  142.291070]  driver_detach+0x4c/0x90
[  142.298259]  bus_remove_driver+0x5c/0xd8
[  142.306148]  driver_unregister+0x2c/0x54
[  142.314037]  platform_driver_unregister+0x10/0x18
[  142.323505]  hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[  142.335248]  __arm64_sys_delete_module+0x214/0x25c
[  142.344891]  el0_svc_common+0xb0/0x10c
[  142.352430]  el0_svc_handler+0x24/0x80
[  142.359968]  el0_svc+0x8/0x7c0
[  142.366104] ---[ end trace 60ad1cd58e63c407 ]---

The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.

The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().

In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.

This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When reboot the system again and again, may cause a memory
overwrite.

[   15.638922] systemd[1]: Reached target Swap.
[   15.667561] tun: Universal TUN/TAP device driver, 1.6
[   15.676756] Bridge firewalling registered
[   17.344135] Unable to handle kernel paging request at virtual address 0000000200000040
[   17.352179] Mem abort info:
[   17.355007]   ESR = 0x96000004
[   17.358105]   Exception class = DABT (current EL), IL = 32 bits
[   17.364112]   SET = 0, FnV = 0
[   17.367209]   EA = 0, S1PTW = 0
[   17.370393] Data abort info:
[   17.373315]   ISV = 0, ISS = 0x00000004
[   17.377206]   CM = 0, WnR = 0
[   17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[   17.386926] [0000000200000040] pgd=0000000000000000
[   17.391878] Internal error: Oops: 96000004 [#1] SMP
[   17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G            E     4.19.25-1.2.78.aarch64 #1
[   17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[   17.425615] Workqueue: events_unbound async_run_entry_fn
[   17.435151] pstate: 00000005 (nzcv daif -PAN -UAO)
[   17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[   17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[   17.461701] sp : ffff000100d9bb60
[   17.469146] x29: ffff000100d9bb60 x28: 0000000000000000
[   17.478547] x27: 0000000000000000 x26: ffff802fb8945000
[   17.488063] x25: 0000000000000000 x24: ffff802fa32081a8
[   17.497381] x23: 0000000000000002 x22: ffff801fa2b15220
[   17.506701] x21: ffff000009809000 x20: ffff802fa23a0888
[   17.515980] x19: ffff801fa2b15220 x18: 0000000000000000
[   17.525272] x17: 0000000200000000 x16: 0000000200000000
[   17.534511] x15: 0000000000000000 x14: 0000000000000000
[   17.543652] x13: ffff000008d95db8 x12: 000000000000000d
[   17.552780] x11: ffff000008d95d90 x10: 0000000000000b00
[   17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560
[   17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05
[   17.579839] x5 : 0000000000000000 x4 : 0000000000000000
[   17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000
[   17.597734] x1 : 0000000200000000 x0 : 0000000200000000
[   17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[   17.617438] Call trace:
[   17.623349]  __mutex_lock.isra.1+0x74/0x540
[   17.630927]  __mutex_lock_slowpath+0x24/0x30
[   17.638602]  mutex_lock+0x50/0x60
[   17.645295]  drain_workqueue+0x34/0x198
[   17.652623]  __sas_drain_work+0x7c/0x168
[   17.659903]  sas_drain_work+0x60/0x68
[   17.666947]  hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[   17.676129]  do_scsi_scan_host+0x70/0xb0
[   17.683534]  do_scan_async+0x20/0x228
[   17.690586]  async_run_entry_fn+0x4c/0x1d0
[   17.697997]  process_one_work+0x1b4/0x3f8
[   17.705296]  worker_thread+0x54/0x470

Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040

The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"

This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.

So use NAPI_POLL_WEIGHT to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]

After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.

This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.
Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename bpf_flow_dissector.txt to bpf_flow_dissector.rst and fix
formatting. Also, link it from the Documentation/networking/index.rst.

Tested with 'make htmldocs' to make sure it looks reasonable.

Fixes: ae82899b ("flow_dissector: document BPF flow dissector environment")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Running LTP oom01 in a tight loop or memory stress testing put the system
in a low-memory situation could triggers random memory corruption like
page flag corruption below due to in fast_isolate_freepages(), if
isolation fails, next_search_order() does not abort the search immediately
could lead to improper accesses.

UBSAN: Undefined behaviour in ./include/linux/mm.h:1195:50
index 7 is out of range for type 'zone [5]'
Call Trace:
 dump_stack+0x62/0x9a
 ubsan_epilogue+0xd/0x7f
 __ubsan_handle_out_of_bounds+0x14d/0x192
 __isolate_free_page+0x52c/0x600
 compaction_alloc+0x886/0x25f0
 unmap_and_move+0x37/0x1e70
 migrate_pages+0x2ca/0xb20
 compact_zone+0x19cb/0x3620
 kcompactd_do_work+0x2df/0x680
 kcompactd+0x1d8/0x6c0
 kthread+0x32c/0x3f0
 ret_from_fork+0x35/0x40
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:3124!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
RIP: 0010:__isolate_free_page+0x464/0x600
RSP: 0000:ffff888b9e1af848 EFLAGS: 00010007
RAX: 0000000030000000 RBX: ffff888c39fcf0f8 RCX: 0000000000000000
RDX: 1ffff111873f9e25 RSI: 0000000000000004 RDI: ffffed1173c35ef6
RBP: ffff888b9e1af898 R08: fffffbfff4fc2461 R09: fffffbfff4fc2460
R10: fffffbfff4fc2460 R11: ffffffffa7e12303 R12: 0000000000000008
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000007
FS:  0000000000000000(0000) GS:ffff888ba8e80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc7abc00000 CR3: 0000000752416004 CR4: 00000000001606a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 compaction_alloc+0x886/0x25f0
 unmap_and_move+0x37/0x1e70
 migrate_pages+0x2ca/0xb20
 compact_zone+0x19cb/0x3620
 kcompactd_do_work+0x2df/0x680
 kcompactd+0x1d8/0x6c0
 kthread+0x32c/0x3f0
 ret_from_fork+0x35/0x40

Link: http://lkml.kernel.org/r/20190320192648.52499-1-cai@lca.pw
Fixes: dbe2d4e4 ("mm, compaction: round-robin the order while searching the free lists for a target")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>

Mikhail Gavrilo reported the following bug being triggered in a Fedora
kernel based on 5.1-rc1 but it is relevant to a vanilla kernel.

 kernel: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 kernel: ------------[ cut here ]------------
 kernel: kernel BUG at include/linux/mm.h:1021!
 kernel: invalid opcode: 0000 [#1] SMP NOPTI
 kernel: CPU: 6 PID: 116 Comm: kswapd0 Tainted: G         C        5.1.0-0.rc1.git1.3.fc31.x86_64 #1
 kernel: Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 1201 12/07/2018
 kernel: RIP: 0010:__reset_isolation_pfn+0x244/0x2b0
 kernel: Code: fe 06 e8 0f 8e fc ff 44 0f b6 4c 24 04 48 85 c0 0f 85 dc fe ff ff e9 68 fe ff ff 48 c7 c6 58 b7 2e 8c 4c 89 ff e8 0c 75 00 00 <0f> 0b 48 c7 c6 58 b7 2e 8c e8 fe 74 00 00 0f 0b 48 89 fa 41 b8 01
 kernel: RSP: 0018:ffff9e2d03f0fde8 EFLAGS: 00010246
 kernel: RAX: 0000000000000034 RBX: 000000000081f380 RCX: ffff8cffbddd6c20
 kernel: RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8cffbddd6c20
 kernel: RBP: 0000000000000001 R08: 0000009898b94613 R09: 0000000000000000
 kernel: R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000100000
 kernel: R13: 0000000000100000 R14: 0000000000000001 R15: ffffca7de07ce000
 kernel: FS:  0000000000000000(0000) GS:ffff8cffbdc00000(0000) knlGS:0000000000000000
 kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 kernel: CR2: 00007fc1670e9000 CR3: 00000007f5276000 CR4: 00000000003406e0
 kernel: Call Trace:
 kernel:  __reset_isolation_suitable+0x62/0x120
 kernel:  reset_isolation_suitable+0x3b/0x40
 kernel:  kswapd+0x147/0x540
 kernel:  ? finish_wait+0x90/0x90
 kernel:  kthread+0x108/0x140
 kernel:  ? balance_pgdat+0x560/0x560
 kernel:  ? kthread_park+0x90/0x90
 kernel:  ret_from_fork+0x27/0x50

He bisected it down to e332f741 ("mm, compaction: be selective about
what pageblocks to clear skip hints").  The problem is that the patch in
question was sloppy with respect to the handling of zone boundaries.  In
some instances, it was possible for PFNs outside of a zone to be examined
and if those were not properly initialised or poisoned then it would
trigger the VM_BUG_ON.  This patch corrects the zone boundary issues when
resetting pageblock skip hints and Mikhail reported that the bug did not
trigger after 30 hours of testing.

Link: http://lkml.kernel.org/r/20190327085424.GL3189@techsingularity.net
Fixes: e332f741 ("mm, compaction: be selective about what pageblocks to clear skip hints")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>

Pull smb3 fixes from Steve French:
 "Four smb3 fixes for stable:

   - fix an open path where we had an unitialized structure

   - fix for snapshot (previous version) enumeration

   - allow reconnect timeout on handles to be configurable to better
     handle network or server crash

   - correctly handle lack of file_all_info structure"

* tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.
  SMB3: Allow persistent handle timeout to be configurable on mount
  smb3: Fix enumerating snapshots to Azure
  cifs: fix kref underflow in close_shroot()

At the beginning of ip6_fragment func, the prevhdr pointer is
obtained in the ip6_find_1stfragopt func.
However, all the pointers pointing into skb header may change
when calling skb_checksum_help func with
skb->ip_summed = CHECKSUM_PARTIAL condition.
The prevhdr pointe will be dangling if it is not reloaded after
calling __skb_linearize func in skb_checksum_help func.

Here, I add a variable, nexthdr_offset, to evaluate the offset,
which does not changes even after calling __skb_linearize func.

Fixes: 405c92f7 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we may merge incorrectly a received GSO packet
or a packet with frag_list into a packet sitting in the
gro_hash list. skb_segment() may crash case because
the assumptions on the skb layout are not met.
The correct behaviour would be to flush the packet in the
gro_hash list and send the received GSO packet directly
afterwards. Commit d61d072e ("net-gro: avoid reorders")
sets NAPI_GRO_CB(skb)->flush in this case, but this is not
checked before merging. This patch makes sure to check this
flag and to not merge in that case.

Fixes: d61d072e ("net-gro: avoid reorders")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>