Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and wifi.

  Current release - regressions:

   - neighbour: fix __randomize_layout crash in struct neighbour

   - r8169: fix deadlock on RTL8125 in jumbo mtu mode

  Previous releases - regressions:

   - wifi:
       - mac80211: fix warning at station removal time
       - cfg80211: fix CQM for non-range use

   - tools: ynl-gen: fix unexpected response handling

   - octeontx2-af: fix possible buffer overflow

   - dpaa2: recycle the RX buffer only after all processing done

   - rswitch: fix missing dev_kfree_skb_any() in error path

  Previous releases - always broken:

   - ipv4: fix uaf issue when receiving igmp query packet

   - wifi: mac80211: fix debugfs deadlock at device removal time

   - bpf:
       - sockmap: af_unix stream sockets need to hold ref for pair sock
       - netdevsim: don't accept device bound programs

   - selftests: fix a char signedness issue

   - dsa: mv88e6xxx: fix marvell 6350 probe crash

   - octeontx2-pf: restore TC ingress police rules when interface is up

   - wangxun: fix memory leak on msix entry

   - ravb: keep reverse order of operations in ravb_remove()"

* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  net: ravb: Keep reverse order of operations in ravb_remove()
  net: ravb: Stop DMA in case of failures on ravb_open()
  net: ravb: Start TX queues after HW initialization succeeded
  net: ravb: Make write access to CXR35 first before accessing other EMAC registers
  net: ravb: Use pm_runtime_resume_and_get()
  net: ravb: Check return value of reset_control_deassert()
  net: libwx: fix memory leak on msix entry
  ice: Fix VF Reset paths when interface in a failed over aggregate
  bpf, sockmap: Add af_unix test with both sockets in map
  bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
  tools: ynl-gen: always construct struct ynl_req_state
  ethtool: don't propagate EOPNOTSUPP from dumps
  ravb: Fix races between ravb_tx_timeout_work() and net related ops
  r8169: prevent potential deadlock in rtl8169_close
  r8169: fix deadlock on RTL8125 in jumbo mtu mode
  neighbour: Fix __randomize_layout crash in struct neighbour
  octeontx2-pf: Restore TC ingress police rules when interface is up
  octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
  net: stmmac: xgmac: Disable FPE MMC interrupts
  octeontx2-af: Fix possible buffer overflow
  ...

Pull pmdomain fix from Ulf Hansson:

 - Avoid polling for the scmi_perf_domain on arm

* tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: arm: Avoid polling for scmi_perf_domain

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix CQE error recovery path

  MMC host:
   - cqhci: Fix CQE error recovery path
   - sdhci-pci-gli: Fix initialization of LPM
   - sdhci-sprd: Fix enabling/disabling of the vqmmc regulator"

* tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled
  mmc: sdhci-pci-gli: Disable LPM during initialization
  mmc: cqhci: Fix task clearing in CQE error recovery
  mmc: cqhci: Warn of halt or task clear failure
  mmc: block: Retry commands in CQE error recovery
  mmc: block: Be sure to wait while busy in CQE error recovery
  mmc: cqhci: Increase recovery halt timeout
  mmc: block: Do not lose cache flush during CQE error recovery

Pull LED fix from Lee Jones:

 - Remove duplicate sysfs entry 'color' from LEDs class

* tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
  leds: class: Don't expose color sysfs entry

Pull EFI fix from Ard Biesheuvel:

 - Fix for EFI unaccepted memory handling

* tag 'efi-urgent-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: Fix off-by-one when checking for overlapping ranges

Claudiu Beznea says:

====================
net: ravb: Fixes for the ravb driver

This series adds some fixes for ravb driver. Patches in this series
were initilly part of series at [1].

Changes in v2:
- in description of patch 1/6 documented the addition of
  out_free_netdev goto label
- collected tags
- s/out_runtime_disable/out_rpm_disable in patch 2/6
- fixed typos in description of patch 6/6

Changes since [1]:
- addressed review comments
- added patch 6/6

[1] https://lore.kernel.org/all/20231120084606.4083194-1-claudiu.beznea.uj@bp.renesas.com/
====================

Link: https://lore.kernel.org/r/20231128080439.852467-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:

$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
  echo 11c30000.ethernet > bind; done

It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:

1/ as a result of bind success the user space open/configures the
   interfaces tough an IOCTL; the following stack trace has been
   identified on RZ/G3S:

Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198

2/ this call may execute concurrently with ravb_remove() as the
   unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
   ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
   while the above ravb_open() is in progress it may lead to MAC
   (or PHY, or MAC-PHY connection, the right point hasn't been identified
   at the moment) to be broken, thus the Ethernet connectivity fails to
   restore.

The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.

To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:

int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
	// ...

        rtnl_lock();

        ret = -ENODEV;
        dev = __dev_get_by_name(net, ifr->ifr_name);
        if (!dev)
                goto done;

	// ...
done:
        rtnl_unlock();
out:
        return ret;
}

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().

Fixes: a0d2f206 ("Renesas Ethernet AVB PTP clock driver")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".

The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.

Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.

Take into account these indication.

Fixes: 1089877a ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.

Along with it, the free_netdev() call from the error path was moved after
reset_control_assert() on its own label (out_free_netdev) to free
netdev in case reset_control_deassert() fails.

Fixes: 0d13a1a4 ("ravb: Add reset support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the
calling of pci_msix_shutdown(), wx->msix_entries is never freed.
Reordering the lines to fix the memory leak.

Cc: stable@vger.kernel.org
Fixes: 3f703186 ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is an error when an interface has the following conditions:
- PF is in an aggregate (bond)
- PF has VFs created on it
- bond is in a state where it is failed-over to the secondary interface
- A VF reset is issued on one or more of those VFs

The issue is generated by the originating PF trying to rebuild or
reconfigure the VF resources.  Since the bond is failed over to the
secondary interface the queue contexts are in a modified state.

To fix this issue, have the originating interface reclaim its resources
prior to the tear-down and rebuild or reconfigure.  Then after the process
is complete, move the resources back to the currently active interface.

There are multiple paths that can be used depending on what triggered the
event, so create a helper function to move the queues and use paired calls
to the helper (back to origin, process, then move back to active interface)
under the same lag_mutex lock.

Fixes: 1e0f9881 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
wireless fixes:
 - debugfs had a deadlock (removal vs. use of files),
   fixes going through wireless ACKed by Greg
 - support for HT STAs on 320 MHz channels, even if it's
   not clear that should ever happen (that's 6 GHz), best
   not to WARN()
 - fix for the previous CQM fix that broke most cases
 - various wiphy locking fixes
 - various small driver fixes

* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: use wiphy locked debugfs for sdata/link
  wifi: mac80211: use wiphy locked debugfs helpers for agg_status
  wifi: cfg80211: add locked debugfs wrappers
  debugfs: add API to allow debugfs operations cancellation
  debugfs: annotate debugfs handlers vs. removal with lockdep
  debugfs: fix automount d_fsdata usage
  wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
  wifi: avoid offset calculation on NULL pointer
  wifi: cfg80211: hold wiphy mutex for send_interface
  wifi: cfg80211: lock wiphy mutex for rfkill poll
  wifi: cfg80211: fix CQM for non-range use
  wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
  wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
  wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
  wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================

Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-11-30

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).

The main changes are:

1) Fix AF_UNIX splat from use after free in BPF sockmap,
   from John Fastabend.

2) Fix a syzkaller splat in netdevsim by properly handling offloaded
   programs (and not device-bound ones), from Stanislav Fomichev.

3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
   from Hou Tao.

4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
   from Daniel Borkmann.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Add af_unix test with both sockets in map
  bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
  netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
  bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
  netdevsim: Don't accept device bound programs
====================

Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This adds a test where both pairs of a af_unix paired socket are put into a
BPF map. This ensures that when we tear down the af_unix pair we don't have
any issues on sockmap side with ordering and reference counting.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com

AF_UNIX stream sockets are a paired socket. So sending on one of the pairs
will lookup the paired socket as part of the send operation. It is possible
however to put just one of the pairs in a BPF map. This currently increments
the refcnt on the sock in the sockmap to ensure it is not free'd by the
stack before sockmap cleans up its state and stops any skbs being sent/recv'd
to that socket.

But we missed a case. If the peer socket is closed it will be free'd by the
stack. However, the paired socket can still be referenced from BPF sockmap
side because we hold a reference there. Then if we are sending traffic through
BPF sockmap to that socket it will try to dereference the free'd pair in its
send logic creating a use after free. And following splat:

   [59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0
   [59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954
   [...]
   [59.905468] Call Trace:
   [59.905787]  <TASK>
   [59.906066]  dump_stack_lvl+0x130/0x1d0
   [59.908877]  print_report+0x16f/0x740
   [59.910629]  kasan_report+0x118/0x160
   [59.912576]  sk_wake_async+0x31/0x1b0
   [59.913554]  sock_def_readable+0x156/0x2a0
   [59.914060]  unix_stream_sendmsg+0x3f9/0x12a0
   [59.916398]  sock_sendmsg+0x20e/0x250
   [59.916854]  skb_send_sock+0x236/0xac0
   [59.920527]  sk_psock_backlog+0x287/0xaa0

To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its
paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The
primarily problem with keeping this logic in bpf_unix was: In the sock close()
we could handle the deref by having a close handler. But, when we are destroying
the psock through a map delete operation we wouldn't have gotten any signal
thorugh the proto struct other than it being replaced. If we do the deref from
the proto replace its too early because we need to deref the sk_pair after the
backlog worker has been stopped.

Given all this it seems best to just cache it at the end of the psock and eat 8B
for the af_unix and vsock users. Notice dgram sockets are OK because they handle
locking already.

Fixes: 94531cfc ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com

struct ynl_req_state carries reply-related info from generated code
into generic YNL code. While we don't need reply info to execute
a request without a reply, we still need to pass in the struct, because
it's also where we get the pointer to struct ynl_sock from. Passing NULL
results in crashes if kernel returns an error or an unexpected reply.

Fixes: dc0956c9 ("tools: ynl-gen: move the response reading logic into YNL")
Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The default dump handler needs to clear ret before returning.
Otherwise if the last interface returns an inconsequential
error this error will propagate to user space.

This may confuse user space (ethtool CLI seems to ignore it,
but YNL doesn't). It will also terminate the dump early
for mutli-skb dump, because netlink core treats EOPNOTSUPP
as a real error.

Fixes: 728480f1 ("ethtool: default handlers for GET requests")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull pin control fixes from Linus Walleij:

 - Fix a really interesting potential core bug in the list iterator
   requireing the use of READ_ONCE() discovered when testing kernel
   compiles with clang.

 - Check devm_kcalloc() return value and an array bounds in the STM32
   driver.

 - Fix an exotic string truncation issue in the s32cc driver, found by
   the kernel test robot (impressive!)

 - Fix an undocumented struct member in the cy8c95x0 driver.

 - Fix a symbol overlap with MIPS in the Lochnagar driver, MIPS defines
   a global symbol "RST" which is a bit too generic and collide with
   stuff. OK this one should be renamed too, we will fix that as well.

 - Fix erroneous branch taking in the Realtek driver.

 - Fix the mail address in MAINTAINERS for the s32g2 driver.

* tag 'pinctrl-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  dt-bindings: pinctrl: s32g2: change a maintainer email address
  pinctrl: realtek: Fix logical error when finding descriptor
  pinctrl: lochnagar: Don't build on MIPS
  pinctrl: avoid reload of p state in list iteration
  pinctrl: cy8c95x0: Fix doc warning
  pinctrl: s32cc: Avoid possible string truncation
  pinctrl: stm32: fix array read out of bound
  pinctrl: stm32: Add check for devm_kcalloc

Fix races between ravb_tx_timeout_work() and functions of net_device_ops
and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that
since ravb_close() is under the rtnl lock and calls cancel_work_sync(),
ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock
may happen in ravb_tx_timeout_work() like below:

CPU0			CPU1
			ravb_tx_timeout()
			schedule_work()
...
__dev_close_many()
// Under rtnl lock
ravb_close()
cancel_work_sync()
// Waiting
			ravb_tx_timeout_work()
			rtnl_lock()
			// This is possible to cause a deadlock

If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fixes from David Sterba:
 "A few fixes and message updates:

   - for simple quotas, handle the case when a snapshot is created and
     the target qgroup already exists

   - fix a warning when file descriptor given to send ioctl is not
     writable

   - fix off-by-one condition when checking chunk maps

   - free pages when page array allocation fails during compression
     read, other cases were handled

   - fix memory leak on error handling path in ref-verify debugging
     feature

   - copy missing struct member 'version' in 64/32bit compat send ioctl

   - tree-checker verifies inline backref ordering

   - print messages to syslog on first mount and last unmount

   - update error messages when reading chunk maps"

* tag 'for-6.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: send: ensure send_fd is writable
  btrfs: free the allocated memory if btrfs_alloc_page_array() fails
  btrfs: fix 64bit compat send ioctl arguments not initializing version member
  btrfs: make error messages more clear when getting a chunk map
  btrfs: fix off-by-one when checking chunk map includes logical address
  btrfs: ref-verify: fix memory leaks in btrfs_ref_tree_mod()
  btrfs: add dmesg output for first mount and last unmount of a filesystem
  btrfs: do not abort transaction if there is already an existing qgroup
  btrfs: tree-checker: add type and sequence check for inline backrefs

ndo_stop() is RTNL-protected by net core, and the worker function takes
RTNL as well. Therefore we will deadlock when trying to execute a
pending work synchronously. To fix this execute any pending work
asynchronously. This will do no harm because netif_running() is false
in ndo_stop(), and therefore the work function is effectively a no-op.
However we have to ensure that no task is running or pending after
rtl_remove_one(), therefore add a call to cancel_work_sync().

Fixes: abe5fc42 ("r8169: use RTNL to protect critical sections")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The original change results in a deadlock if jumbo mtu mode is used.
Reason is that the phydev lock is held when rtl_reset_work() is called
here, and rtl_jumbo_config() calls phy_start_aneg() which also tries
to acquire the phydev lock. Fix this by calling rtl_reset_work()
asynchronously.

Fixes: 621735f5 ("r8169: fix rare issue with broken rx after link-down on RTL8125")
Reported-by: Ian Chen <free122448@hotmail.com>
Tested-by: Ian Chen <free122448@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When a task needs to accept memory it will scan the accepting_list
to see if any ranges already being processed by other tasks overlap
with its range. Due to an off-by-one in the range comparisons, a task
might falsely determine that an overlapping range is being accepted,
leading to an unnecessary delay before it begins processing the range.

Fix the off-by-one in the range comparison to prevent this and slightly
improve performance.

Fixes: 50e782a8 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance")
Link: https://lore.kernel.org/linux-mm/20231101004523.vseyi5bezgfaht5i@amd.com/T/#me2eceb9906fcae5fe958b3fe88e41f920f8335b6Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Previously, one-element and zero-length arrays were treated as true
flexible arrays, even though they are actually "fake" flex arrays.
The __randomize_layout would leave them untouched at the end of the
struct, similarly to proper C99 flex-array members.

However, this approach changed with commit 1ee60356 ("gcc-plugins:
randstruct: Only warn about true flexible arrays"). Now, only C99
flexible-array members will remain untouched at the end of the struct,
while one-element and zero-length arrays will be subject to randomization.

Fix a `__randomize_layout` crash in `struct neighbour` by transforming
zero-length array `primary_key` into a proper C99 flexible-array member.

Fixes: 1ee60356 ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Closes: https://lore.kernel.org/linux-hardening/20231124102458.GB1503258@e124191.cambridge.arm.com/Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@workSigned-off-by: Paolo Abeni <pabeni@redhat.com>

TC ingress policer rules depends on interface receive queue
contexts since the bandwidth profiles are attached to RQ
contexts. When an interface is brought down all the queue
contexts are freed. This in turn frees bandwidth profiles in
hardware causing ingress police rules non-functional after
the interface is brought up. Fix this by applying all the ingress
police rules config to hardware in otx2_open. Also allow
adding ingress rules only when interface is running
since no contexts exist for the interface when it is down.

Fixes: 68fbff68 ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When more than 64 VFs are enabled for a PF then mbox communication
between VF and PF is not working as mbox work queueing for few VFs
are skipped due to wrong calculation of VF numbers.

Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts
by default") tries to disable MMC interrupts to avoid a storm of
unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
interrupts enabled, FPE MMC interrupts can cause the same problem.
Now we mask FPE TX and RX interrupts to disable all MMC interrupts.

Fixes: aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts by default")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

A loop in rvu_mbox_handler_nix_bandprof_free() contains
a break if (idx == MAX_BANDPROF_PER_PFFUNC),
but if idx may reach MAX_BANDPROF_PER_PFFUNC
buffer '(*req->prof_idx)[layer]' overflow happens before that check.

The patch moves the break to the
beginning of the loop.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: e8e095b3 ("octeontx2-af: cn10k: Bandwidth profiles config support").
Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Willem de Bruijn says:

====================
selftests/net: fix a few small compiler warnings

Observed a clang warning when backporting cmsg_sender.
Ran the same build against all the .c files under selftests/net.

This is clang-14 with -Wall
Which is what tools/testing/selftests/net/Makefile also enables.
====================

Link: https://lore.kernel.org/r/20231124171645.1011043-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Same init_rng() in both tests. The function reads /dev/urandom to
initialize srand(). In case of failure, it falls back onto the
entropy in the uninitialized variable. Not sure if this is on purpose.
But failure reading urandom should be rare, so just fail hard. While
at it, convert to getrandom(). Which man 4 random suggests is simpler
and more robust.

    mptcp_inq.c:525:6:
    mptcp_connect.c:1131:6:

    error: variable 'foo' is used uninitialized
    whenever 'if' condition is false
    [-Werror,-Wsometimes-uninitialized]

Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp")
Fixes: b5188056 ("selftests: mptcp: add inq test case")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Willem de Bruijn <willemb@google.com>

----

When input is randomized because this is expected to meaningfully
explore edge cases, should we also add
1. logging the random seed to stdout and
2. adding a command line argument to replay from a specific seed
I can do this in net-next, if authors find it useful in this case.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>

Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove an unused variable.

    diag_uid.c:151:24:
    error: unused variable 'udr'
    [-Werror,-Wunused-variable]

Fixes: ac011361 ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-4-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Signedness of char is signed on x86_64, but unsigned on arm64.

Fix the warning building cmsg_sender.c on signed platforms or
forced with -fsigned-char:

    msg_sender.c:455:12:
    error: implicit conversion from 'int' to 'char'
    changes value from 128 to -128
    [-Werror,-Wconstant-conversion]
        buf[0] = ICMPV6_ECHO_REQUEST;

constant ICMPV6_ECHO_REQUEST is 128.

Link: https://lwn.net/Articles/911914
Fixes: de17e305 ("selftests: net: cmsg_sender: support icmp and raw sockets")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix a small compiler warning.

nr_process must be a signed long: it is assigned a signed long by
strtol() and is compared against LONG_MIN and LONG_MAX.

ipsec.c:2280:65:
    error: result of comparison of constant -9223372036854775808
    with expression of type 'unsigned int' is always false
    [-Werror,-Wtautological-constant-out-of-range-compare]

  if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN))

Fixes: bc2652b7 ("selftest/net/xfrm: Add test for ipsec tunnel")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull smb server fixes from Steve French:

 - Memory leak fix

 - Fix possible deadlock in open

 - Multiple SMB3 leasing (caching) fixes including:
     - incorrect open count (found via xfstest generic/002 with leases)
     - lease breaking incorrect serialization
     - lease break error handling fix
     - fix sending async response when lease pending

 - Async command fix

* tag '6.7-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: don't update ->op_state as OPLOCK_STATE_NONE on error
  ksmbd: move setting SMB2_FLAGS_ASYNC_COMMAND and AsyncId
  ksmbd: release interim response after sending status pending response
  ksmbd: move oplock handling after unlock parent dir
  ksmbd: separately allocate ci per dentry
  ksmbd: fix possible deadlock in smb2_open
  ksmbd: prevent memory leak on error return

Pull media fixes from Mauro Carvalho Chehab.

* tag 'media/v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: pci: mgb4: add COMMON_CLK dependency
  media: v4l2-subdev: Fix a 64bit bug
  media: mgb4: Added support for T200 card variant
  media: vsp1: Remove unbalanced .s_stream(0) calls

The IFLA_NETKIT_PEER_INFO attribute can only be used during device
creation, but not via changelink callback. Hence reject it there.

Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/e86a277a1e8d3b19890312779e42f790b0605ea4.1701115314.git.daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

It was a mistake to prefer polling based mode when setting a performance
level for a domain. Let's instead rely on the protocol to decide what is
best and thus avoid polling when possible.
Reported-by: Nikunj Kela <nkela@quicinc.com>
Fixes: 2af23ceb ("pmdomain: arm: Add the SCMI performance domain")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231127135033.136442-1-ulf.hansson@linaro.org