- 13 Oct, 2016 1 commit
-
-
Jarod Wilson authored
While looking into an MTU issue with sfc, I started noticing that almost every NIC driver with an ndo_change_mtu function implemented almost exactly the same range checks, and in many cases, that was the only practical thing their ndo_change_mtu function was doing. Quite a few drivers have either 68, 64, 60 or 46 as their minimum MTU value checked, and then various sizes from 1500 to 65535 for their maximum MTU value. We can remove a whole lot of redundant code here if we simple store min_mtu and max_mtu in net_device, and check against those in net/core/dev.c's dev_set_mtu(). In theory, there should be zero functional change with this patch, it just puts the infrastructure in place. Subsequent patches will attempt to start using said infrastructure, with theoretically zero change in functionality. CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 12 Oct, 2016 17 commits
-
-
David S. Miller authored
Ursula Braun says: ==================== s390: af_iucv patches here are 2 patches for the s390-only af_iucv socket family code. ==================== Signed-off-by: -
Ursula Braun authored
A packet filter might be installed for instance with setsockopt SO_ATTACH_FILTER. af_iucv currently queues skbs rejected by filter into the backlog queue. This does not make sense, since packets rejected by filter can be dropped immediately. This patch adds separate sk_filter return code checking, and dropping of packets if applicable. Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Ursula Braun authored
If a socket program has shut down the socket for sending, it can still receive an undetermined number of packets. The AF_IUCV protocol for HIPER transport requires sending of a WIN flag from time to time from the receiver to the sender, otherwise the peer cannot continue sending. That means sending of control flags must still work, even though the AF_IUCV socket is shutdown for sending data. sock_alloc_send_skb() returns with error EPIPE, if socket sk_shutdown is SEND_SHUTDOWN. Thus this patch temporarily removes the send shutdown attribute from the socket to enable transfer of control flags. Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: fix: Use GPIO to get link status Since the link value reported by the link status register is not reliable if no SPF module inserted, this patchset fixes the issue by using GPIO to determine the link status when no module inserted. ==================== Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
Quan Nguyen <qnguyen@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
Enable CONFIG_GPIO_XGENE_SB. Signed-off-by:
-
Iyappan Subramanian authored
The link value reported by the link status register is not reliable when no SPF module inserted. This patchset fixes this issue by using GPIO to determine the link status. Signed-off-by:
-
Jiri Benc authored
If mpls headers were pushed to a defragmented packet, the refragmentation no longer works correctly after 48d2ab60 ("net: mpls: Fixups for GSO"). The network header has to be shifted after the mpls headers for the fragmentation and restored afterwards. Fixes: 48d2ab60 ("net: mpls: Fixups for GSO") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
-
Linus Torvalds authored
Merge more updates from Andrew Morton: - a few block updates that fell in my lap - lib/ updates - checkpatch - autofs - ipc - a ton of misc other things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) mm: split gfp_mask and mapping flags into separate fields fs: use mapping_set_error instead of opencoded set_bit treewide: remove redundant #include <linux/kconfig.h> hung_task: allow hung_task_panic when hung_task_warnings is 0 kthread: add kerneldoc for kthread_create() kthread: better support freezable kthread workers kthread: allow to modify delayed kthread work kthread: allow to cancel kthread work kthread: initial support for delayed kthread work kthread: detect when a kthread work is used by more workers kthread: add kthread_destroy_worker() kthread: add kthread_create_worker*() kthread: allow to call __kthread_create_on_node() with va_list args kthread/smpboot: do not park in kthread_create_on_cpu() kthread: kthread worker API cleanup kthread: rename probe_kthread_data() to kthread_probe_data() scripts/tags.sh: enable code completion in VIM mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping kdump, vmcoreinfo: report memory sections virtual addresses ipc/sem.c: add cond_resched in exit_sme ...
-
- 11 Oct, 2016 22 commits
-
-
Michal Hocko authored
mapping->flags currently encodes two different things into a single flag. It contains sticky gfp_mask for page cache allocations and AS_ codes used to report errors/enospace and other states which are mapping specific. Condensing the two semantically unrelated things saves few bytes but it also complicates other things. For one thing the gfp flags space is reduced and in fact we are already running out of available bits. It can be assumed that more gfp flags will be necessary later on. To not introduce the address_space grow (at least on x86_64) we can stick it right after private_lock because we have a hole there. struct address_space { struct inode * host; /* 0 8 */ struct radix_tree_root page_tree; /* 8 16 */ spinlock_t tree_lock; /* 24 4 */ atomic_t i_mmap_writable; /* 28 4 */ struct rb_root i_mmap; /* 32 8 */ struct rw_semaphore i_mmap_rwsem; /* 40 40 */ /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */ long unsigned int nrpages; /* 80 8 */ long unsigned int nrexceptional; /* 88 8 */ long unsigned int writeback_index; /* 96 8 */ const struct address_space_operations * a_ops; /* 104 8 */ long unsigned int flags; /* 112 8 */ spinlock_t private_lock; /* 120 4 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 2 boundary (128 bytes) --- */ struct list_head private_list; /* 128 16 */ void * private_data; /* 144 8 */ /* size: 152, cachelines: 3, members: 14 */ /* sum members: 148, holes: 1, sum holes: 4 */ /* last cacheline: 24 bytes */ }; Link: http://lkml.kernel.org/r/20160912114852.GI14524@dhcp22.suse.czSigned-off-by:Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
The mapping_set_error() helper sets the correct AS_ flag for the mapping so there is no reason to open code it. Use the helper directly. [akpm@linux-foundation.org: be honest about conversion from -ENXIO to -EIO] Link: http://lkml.kernel.org/r/20160912111608.2588-2-mhocko@kernel.orgSigned-off-by:
-
Masahiro Yamada authored
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
John Siddle authored
Previously hung_task_panic would not be respected if enabled after hung_task_warnings had already been decremented to 0. Permit the kernel to panic if hung_task_panic is enabled after hung_task_warnings has already been decremented to 0 and another task hangs for hung_task_timeout_secs seconds. Check if hung_task_panic is enabled so we don't return prematurely, and check if hung_task_warnings is non-zero so we don't print the warning unnecessarily. [akpm@linux-foundation.org: fix off-by-one] Link: http://lkml.kernel.org/r/1473450214-4049-1-git-send-email-jsiddle@redhat.comSigned-off-by:
John Siddle <jsiddle@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Jonathan Corbet authored
This macro is referenced in other kerneldoc comments, but lacks one of its own; fix that. Link: http://lkml.kernel.org/r/20160826072313.726a3485@lwn.netSigned-off-by:
Jonathan Corbet <corbet@lwn.net> Reported-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Petr Mladek authored
This patch allows to make kthread worker freezable via a new @flags parameter. It will allow to avoid an init work in some kthreads. It currently does not affect the function of kthread_worker_fn() but it might help to do some optimization or fixes eventually. I currently do not know about any other use for the @flags parameter but I believe that we will want more flags in the future. Finally, I hope that it will not cause confusion with @flags member in struct kthread. Well, I guess that we will want to rework the basic kthreads implementation once all kthreads are converted into kthread workers or workqueues. It is possible that we will merge the two structures. Link: http://lkml.kernel.org/r/1470754545-17632-12-git-send-email-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Petr Mladek authored
There are situations when we need to modify the delay of a delayed kthread work. For example, when the work depends on an event and the initial delay means a timeout. Then we want to queue the work immediately when the event happens. This patch implements kthread_mod_delayed_work() as inspired workqueues. It cancels the timer, removes the work from any worker list and queues it again with the given timeout. A very special case is when the work is being canceled at the same time. It might happen because of the regular kthread_cancel_delayed_work_sync() or by another kthread_mod_delayed_work(). In this case, we do nothing and let the other operation win. This should not normally happen as the caller is supposed to synchronize these operations a reasonable way. Link: http://lkml.kernel.org/r/1470754545-17632-11-git-send-email-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
We are going to use kthread workers more widely and sometimes we will need to make sure that the work is neither pending nor running. This patch implements cancel_*_sync() operations as inspired by workqueues. Well, we are synchronized against the other operations via the worker lock, we use del_timer_sync() and a counter to count parallel cancel operations. Therefore the implementation might be easier. First, we check if a worker is assigned. If not, the work has newer been queued after it was initialized. Second, we take the worker lock. It must be the right one. The work must not be assigned to another worker unless it is initialized in between. Third, we try to cancel the timer when it exists. The timer is deleted synchronously to make sure that the timer call back is not running. We need to temporary release the worker->lock to avoid a possible deadlock with the callback. In the meantime, we set work->canceling counter to avoid any queuing. Fourth, we try to remove the work from a worker list. It might be the list of either normal or delayed works. Fifth, if the work is running, we call kthread_flush_work(). It might take an arbitrary time. We need to release the worker-lock again. In the meantime, we again block any queuing by the canceling counter. As already mentioned, the check for a pending kthread work is done under a lock. In compare with workqueues, we do not need to fight for a single PENDING bit to block other operations. Therefore we do not suffer from the thundering storm problem and all parallel canceling jobs might use kthread_flush_work(). Any queuing is blocked until the counter gets zero. Link: http://lkml.kernel.org/r/1470754545-17632-10-git-send-email-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
We are going to use kthread_worker more widely and delayed works will be pretty useful. The implementation is inspired by workqueues. It uses a timer to queue the work after the requested delay. If the delay is zero, the work is queued immediately. In compare with workqueues, each work is associated with a single worker (kthread). Therefore the implementation could be much easier. In particular, we use the worker->lock to synchronize all the operations with the work. We do not need any atomic operation with a flags variable. In fact, we do not need any state variable at all. Instead, we add a list of delayed works into the worker. Then the pending work is listed either in the list of queued or delayed works. And the existing check of pending works is the same even for the delayed ones. A work must not be assigned to another worker unless reinitialized. Therefore the timer handler might expect that dwork->work->worker is valid and it could simply take the lock. We just add some sanity checks to help with debugging a potential misuse. Link: http://lkml.kernel.org/r/1470754545-17632-9-git-send-email-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
Nothing currently prevents a work from queuing for a kthread worker when it is already running on another one. This means that the work might run in parallel on more than one worker. Also some operations are not reliable, e.g. flush. This problem will be even more visible after we add kthread_cancel_work() function. It will only have "work" as the parameter and will use worker->lock to synchronize with others. Well, normally this is not a problem because the API users are sane. But bugs might happen and users also might be crazy. This patch adds a warning when we try to insert the work for another worker. It does not fully prevent the misuse because it would make the code much more complicated without a big benefit. It adds the same warning also into kthread_flush_work() instead of the repeated attempts to get the right lock. A side effect is that one needs to explicitly reinitialize the work if it must be queued into another worker. This is needed, for example, when the worker is stopped and started again. It is a bit inconvenient. But it looks like a good compromise between the stability and complexity. I have double checked all existing users of the kthread worker API and they all seems to initialize the work after the worker gets started. Just for completeness, the patch adds a check that the work is not already in a queue. The patch also puts all the checks into a separate function. It will be reused when implementing delayed works. Link: http://lkml.kernel.org/r/1470754545-17632-8-git-send-email-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
The current kthread worker users call flush() and stop() explicitly. This function does the same plus it frees the kthread_worker struct in one call. It is supposed to be used together with kthread_create_worker*() that allocates struct kthread_worker. Link: http://lkml.kernel.org/r/1470754545-17632-7-git-send-email-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
Kthread workers are currently created using the classic kthread API, namely kthread_run(). kthread_worker_fn() is passed as the @threadfn parameter. This patch defines kthread_create_worker() and kthread_create_worker_on_cpu() functions that hide implementation details. They enforce using kthread_worker_fn() for the main thread. But I doubt that there are any plans to create any alternative. In fact, I think that we do not want any alternative main thread because it would be hard to support consistency with the rest of the kthread worker API. The naming and function of kthread_create_worker() is inspired by the workqueues API like the rest of the kthread worker API. The kthread_create_worker_on_cpu() variant is motivated by the original kthread_create_on_cpu(). Note that we need to bind per-CPU kthread workers already when they are created. It makes the life easier. kthread_bind() could not be used later for an already running worker. This patch does _not_ convert existing kthread workers. The kthread worker API need more improvements first, e.g. a function to destroy the worker. IMPORTANT: kthread_create_worker_on_cpu() allows to use any format of the worker name, in compare with kthread_create_on_cpu(). The good thing is that it is more generic. The bad thing is that most users will need to pass the cpu number in two parameters, e.g. kthread_create_worker_on_cpu(cpu, "helper/%d", cpu). To be honest, the main motivation was to avoid the need for an empty va_list. The only legal way was to create a helper function that would be called with an empty list. Other attempts caused compilation warnings or even errors on different architectures. There were also other alternatives, for example, using #define or splitting __kthread_create_worker(). The used solution looked like the least ugly. Link: http://lkml.kernel.org/r/1470754545-17632-6-git-send-email-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
kthread_create_on_node() implements a bunch of logic to create the kthread. It is already called by kthread_create_on_cpu(). We are going to extend the kthread worker API and will need to call kthread_create_on_node() with va_list args there. This patch does only a refactoring and does not modify the existing behavior. Link: http://lkml.kernel.org/r/1470754545-17632-5-git-send-email-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
kthread_create_on_cpu() was added by the commit 2a1d4460 ("kthread: Implement park/unpark facility"). It is currently used only when enabling new CPU. For this purpose, the newly created kthread has to be parked. The CPU binding is a bit tricky. The kthread is parked when the CPU has not been allowed yet. And the CPU is bound when the kthread is unparked. The function would be useful for more per-CPU kthreads, e.g. bnx2fc_thread, fcoethread. For this purpose, the newly created kthread should stay in the uninterruptible state. This patch moves the parking into smpboot. It binds the thread already when created. Then the function might be used universally. Also the behavior is consistent with kthread_create() and kthread_create_on_node(). Link: http://lkml.kernel.org/r/1470754545-17632-4-git-send-email-pmladek@suse.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Petr Mladek authored
A good practice is to prefix the names of functions by the name of the subsystem. The kthread worker API is a mix of classic kthreads and workqueues. Each worker has a dedicated kthread. It runs a generic function that process queued works. It is implemented as part of the kthread subsystem. This patch renames the existing kthread worker API to use the corresponding name from the workqueues API prefixed by kthread_: __init_kthread_worker() -> __kthread_init_worker() init_kthread_worker() -> kthread_init_worker() init_kthread_work() -> kthread_init_work() insert_kthread_work() -> kthread_insert_work() queue_kthread_work() -> kthread_queue_work() flush_kthread_work() -> kthread_flush_work() flush_kthread_worker() -> kthread_flush_worker() Note that the names of DEFINE_KTHREAD_WORK*() macros stay as they are. It is common that the "DEFINE_" prefix has precedence over the subsystem names. Note that INIT() macros and init() functions use different naming scheme. There is no good solution. There are several reasons for this solution: + "init" in the function names stands for the verb "initialize" aka "initialize worker". While "INIT" in the macro names stands for the noun "INITIALIZER" aka "worker initializer". + INIT() macros are used only in DEFINE() macros + init() functions are used close to the other kthread() functions. It looks much better if all the functions use the same scheme. + There will be also kthread_destroy_worker() that will be used close to kthread_cancel_work(). It is related to the init() function. Again it looks better if all functions use the same naming scheme. + there are several precedents for such init() function names, e.g. amd_iommu_init_device(), free_area_init_node(), jump_label_init_type(), regmap_init_mmio_clk(), + It is not an argument but it was inconsistent even before. [arnd@arndb.de: fix linux-next merge conflict] Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.comSuggested-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Petr Mladek authored
Patch series "kthread: Kthread worker API improvements" The intention of this patchset is to make it easier to manipulate and maintain kthreads. Especially, I want to replace all the custom main cycles with a generic one. Also I want to make the kthreads sleep in a consistent state in a common place when there is no work. This patch (of 11): A good practice is to prefix the names of functions by the name of the subsystem. This patch fixes the name of probe_kthread_data(). The other wrong functions names are part of the kthread worker API and will be fixed separately. Link: http://lkml.kernel.org/r/1470754545-17632-2-git-send-email-pmladek@suse.comSigned-off-by:
-
Mathieu Maret authored
Vim, with the omnicppcomplete(#1) plugin, can do code completion using information build by ctags. Add flags needed by omnicppcomplete(#2) to have completion on member of structure. 1: https://github.com/vim-scripts/omnicppcomplete 2: https://github.com/vim-scripts/OmniCppComplete/blob/master/doc/omnicppcomplete.txt#L93 Link: http://lkml.kernel.org/r/20160830191546.4469-1-mathieu.maret@gmail.comSigned-off-by:
Mathieu Maret <mathieu.maret@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Catalin Marinas authored
Some of the kmemleak_*() callbacks in memblock, bootmem, CMA convert a physical address to a virtual one using __va(). However, such physical addresses may sometimes be located in highmem and using __va() is incorrect, leading to inconsistent object tracking in kmemleak. The following functions have been added to the kmemleak API and they take a physical address as the object pointer. They only perform the corresponding action if the address has a lowmem mapping: kmemleak_alloc_phys kmemleak_free_part_phys kmemleak_not_leak_phys kmemleak_ignore_phys The affected calling places have been updated to use the new kmemleak API. Link: http://lkml.kernel.org/r/1471531432-16503-1-git-send-email-catalin.marinas@arm.comSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Thomas Garnier authored
KASLR memory randomization can randomize the base of the physical memory mapping (PAGE_OFFSET), vmalloc (VMALLOC_START) and vmemmap (VMEMMAP_START). Adding these variables on VMCOREINFO so tools can easily identify the base of each memory section. Link: http://lkml.kernel.org/r/1471531632-23003-1-git-send-email-thgarnie@google.comSigned-off-by:
Thomas Garnier <thgarnie@google.com> Acked-by:
Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Cc: Eugene Surovegin <surovegin@google.com> Signed-off-by:
-
Nikolay Borisov authored
In CONFIG_PREEMPT=n kernel a softlockup was observed while the for loop in exit_sem. Apparently it's possible for the loop to take quite a long time and it doesn't have a scheduling point in it. Since the codes is executing under an rcu read section this may also cause rcu stalls, which in turn block synchronize_rcu operations, which more or less de-stabilises the whole system. Fix this by introducing a cond_resched() at the beginning of the loop. So this patch fixes the following: NMI watchdog: BUG: soft lockup - CPU#10 stuck for 23s! [httpd:18119] CPU: 10 PID: 18119 Comm: httpd Tainted: G O 4.4.20-clouder2 #6 Hardware name: Supermicro X10DRi/X10DRi, BIOS 1.1 04/14/2015 task: ffff88348d695280 ti: ffff881c95550000 task.ti: ffff881c95550000 RIP: 0010:[<ffffffff81614bc7>] [<ffffffff81614bc7>] _raw_spin_lock+0x17/0x30 RSP: 0018:ffff881c95553e40 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff883161b1eea8 RCX: 000000000000000d RDX: 0000000000000001 RSI: 000000000000000e RDI: ffff883161b1eea4 RBP: ffff881c95553ea0 R08: ffff881c95553e68 R09: ffff883fef376f88 R10: ffff881fffb58c20 R11: ffffea0072556600 R12: ffff883161b1eea0 R13: ffff88348d695280 R14: ffff883dec427000 R15: ffff8831621672a0 FS: 0000000000000000(0000) GS:ffff881fffb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3b3723e020 CR3: 0000000001c0a000 CR4: 00000000001406e0 Call Trace: ? exit_sem+0x7c/0x280 do_exit+0x338/0xb40 do_group_exit+0x43/0xd0 SyS_exit_group+0x14/0x20 entry_SYSCALL_64_fastpath+0x16/0x6e Link: http://lkml.kernel.org/r/1475154992-6363-1-git-send-email-kernel@kyup.comSigned-off-by:Nikolay Borisov <kernel@kyup.com> Cc: Herton R. Krzesinski <herton@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Davidlohr Bueso authored
Blocked tasks queued in q_senders waiting for their message to fit in the queue are blindly awoken every time we think there's a remote chance this might happen. This could cause numerous (and expensive -- thundering herd-ish) bogus wakeups if the queue is still really full. Adding to the scheduling cost/overhead, there's also the fact that we need to take the ipc object lock and requeue ourselves in the q_senders list. By keeping track of the blocked sender's message size, we can know previously if the wakeup ought to occur or not. Otherwise, to maintain the current wakeup order we just move it to the tail. This is exactly what occurs right now if the sender needs to go back to sleep. The case of EIDRM is left completely untouched, as we need to wakeup all the tasks, and shouldn't be playing games in the first place. This patch was seen to save on the 'msgctl10' ltp testcase ~15% in context switches (avg out of ten runs). Although these tests are really about functionality (as opposed to performance), is does show the direct benefits of the optimization. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1469748819-19484-6-git-send-email-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Davidlohr Bueso authored
... 'tis annoying. Link: http://lkml.kernel.org/r/1469748819-19484-4-git-send-email-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dave@stgolabs.net> Acked-by:
-
