- 08 Dec, 2014 5 commits
-
-
Li RongQing authored
[ Upstream commit 1245dfc8 ] pskb_may_pull() maybe change skb->data and make eth pointer oboslete, so set eth after pskb_may_pull() Fixes:3d7b46cd("ip_tunnel: push generic protocol handling to ip_tunnel module") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Li RongQing authored
[ Upstream commit 7a9f526f ] pskb_may_pull maybe change skb->data and make eth pointer oboslete, so eth needs to reload Fixes: 91269e39 ("vxlan: using pskb_may_pull as early as possible") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 91269e39 ] pskb_may_pull should be used to check if skb->data has enough space, skb->len can not ensure that. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit ce6502a8 ] when netif_rx() is done, the netif_rx handled skb maybe be freed, and should not be used. Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit f76936d0 ] fib_nh_match does not match nexthops correctly. Example: ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \ nexthop via 192.168.122.13 dev eth0 ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \ nexthop via 192.168.122.15 dev eth0 Del command is successful and route is removed. After this patch applied, the route is correctly matched and result is: RTNETLINK answers: No such process Please consider this for stable trees as well. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 05 Dec, 2014 3 commits
-
-
Andy Lutomirski authored
commit b645af2d upstream. It's possible for iretq to userspace to fail. This can happen because of a bad CS, SS, or RIP. Historically, we've handled it by fixing up an exception from iretq to land at bad_iret, which pretends that the failed iret frame was really the hardware part of #GP(0) from userspace. To make this work, there's an extra fixup to fudge the gs base into a usable state. This is suboptimal because it loses the original exception. It's also buggy because there's no guarantee that we were on the kernel stack to begin with. For example, if the failing iret happened on return from an NMI, then we'll end up executing general_protection on the NMI stack. This is bad for several reasons, the most immediate of which is that general_protection, as a non-paranoid idtentry, will try to deliver signals and/or schedule from the wrong stack. This patch throws out bad_iret entirely. As a replacement, it augments the existing swapgs fudge into a full-blown iret fixup, mostly written in C. It's should be clearer and more correct. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit af726f21 upstream. There's nothing special enough about the espfix64 double fault fixup to justify writing it in assembly. Move it to C. This also fixes a bug: if the double fault came from an IST stack, the old asm code would return to a partially uninitialized stack frame. Fixes: 3891a04aSigned-off-by:
-
Kamal Mostafa authored
Signed-off-by:
-
- 02 Dec, 2014 30 commits
-
-
Andy Lutomirski authored
commit 6f442be2 upstream. On a 32-bit kernel, this has no effect, since there are no IST stacks. On a 64-bit kernel, #SS can only happen in user code, on a failed iret to user space, a canonical violation on access via RSP or RBP, or a genuine stack segment violation in 32-bit kernel code. The first two cases don't need IST, and the latter two cases are unlikely fatal bugs, and promoting them to double faults would be fine. This fixes a bug in which the espfix64 code mishandles a stack segment violation. This saves 4k of memory per CPU and a tiny bit of code. Signed-off-by:
-
Alex Deucher authored
commit 28731d58 upstream. Value needs to be swapped on BE. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Moore authored
commit b1a5ad00 upstream. isert has an issue of trying to create a CQ with more CQEs than are supported by the hardware, that currently results in failures during isert_device creation during first session login. This is the isert version of the patch that Minh Tran submitted for iser, and is simple a workaround required to function with existing ocrdma hardware. Signed-off-by:
Chris Moore <chris.moore@emulex.com> Reviewied-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 78579b7c upstream. As reported by Dmitry, on some Chromebooks there are devices with corresponding ACPI objects and with unusual system wakeup configuration. Namely, they technically are wakeup-capable, but the wakeup is handled via a platform-specific out-of-band mechanism and the ACPI PM layer has no information on the wakeup capability. As a result, device_may_wakeup(dev) called from acpi_dev_suspend_late() returns 'true' for those devices, but the wakeup.flags.valid flag is unset for the corresponding ACPI device objects, so acpi_device_wakeup() reproducibly fails for them causing acpi_dev_suspend_late() to return an error code. The entire system suspend is then aborted and the machines in question cannot suspend at all. Address the problem by ignoring the device_may_wakeup(dev) return value in acpi_dev_suspend_late() if the ACPI companion of the device being handled has wakeup.flags.valid unset (in which case it is clear that the wakeup is supposed to be handled by other means). This fixes a regression introduced by commit a76e9bd8 (i2c: attach/detach I2C client device to the ACPI power domain) as the affected systems could suspend and resume successfully before that commit. Fixes: a76e9bd8 (i2c: attach/detach I2C client device to the ACPI power domain) Reported-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Aaro Koskinen authored
commit bbaf113a upstream. Fix incorrect cast that always results in wrong address for the new frame on 64-bit kernels. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nsn.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8110/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Maxime Ripard authored
commit 6bab4a8a upstream. The interrupts were activated and the handler registered before the clockevent was registered in the probe function. The interrupt handler, however, was making the assumption that the clockevent device was registered. That could cause a null pointer dereference if the timer interrupt was firing during this narrow window. Fix that by moving the clockevent registration before the interrupt is enabled. Reported-by:
Roman Byshko <rbyshko@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> [ kamal: backport to 3.13-stable ] Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 746c9e9f upstream. We have a historical hack that treats missing ranges properties as the equivalent of an empty one. This is needed for ancient PowerMac "bad" device-trees, and shouldn't be enabled for any other PowerPC platform, otherwise we get some nasty layout of devices in sysfs or even duplication when a set of otherwise identically named devices is created multiple times under a different parent node with no ranges property. This fix is needed for the PowerNV i2c busses to be exposed properly and will fix a number of other embedded cases. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Grant Likely <grant.likely@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Bjorn Helgaas authored
commit 66865de4 upstream. a9ecdc0f ("of/irq: Fix lookup to use 'interrupts-extended' property first") updated the description to say that: - Both 'interrupts' and 'interrupts-extended' may be present - Software should prefer 'interrupts-extended' - Software that doesn't comprehend 'interrupts-extended' may use 'interrupts' But there is still a paragraph at the end that prohibits having both and says 'interrupts' should be preferred. Remove the contradictory text. Fixes: a9ecdc0f ("of/irq: Fix lookup to use 'interrupts-extended' property first") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Kees Cook authored
commit 45e2a9d4 upstream. When setting up permissions on kernel memory at boot, the end of the PMD that was split from bss remained executable. It should be NX like the rest. This performs a PMD alignment instead of a PAGE alignment to get the correct span of memory. Before: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82c00000 10M RW PSE GLB NX pmd 0xffffffff82c00000-0xffffffff82df5000 2004K RW GLB NX pte 0xffffffff82df5000-0xffffffff82e00000 44K RW GLB x pte 0xffffffff82e00000-0xffffffffc0000000 978M pmd After: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82e00000 12M RW PSE GLB NX pmd 0xffffffff82e00000-0xffffffffc0000000 978M pmd [ tglx: Changed it to roundup(_brk_end, PMD_SIZE) and added a comment. We really should unmap the reminder along with the holes caused by init,initdata etc. but thats a different issue ] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20141114194737.GA3091@www.outflux.netSigned-off-by:
-
Alexey Khoroshilov authored
commit efbd50d2 upstream. It seems struct esd_usb2 dev is not deallocated on disconnect. The patch adds the missing deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Thomas Körper authored
commit 5247a589 upstream. ikfree_skb() is Called in can_free_echo_skb(), which might be called from (TX Error) interrupt, which triggers the folloing warning: [ 1153.360705] ------------[ cut here ]------------ [ 1153.360715] WARNING: CPU: 0 PID: 31 at net/core/skbuff.c:563 skb_release_head_state+0xb9/0xd0() [ 1153.360772] Call Trace: [ 1153.360778] [<c167906f>] dump_stack+0x41/0x52 [ 1153.360782] [<c105bb7e>] warn_slowpath_common+0x7e/0xa0 [ 1153.360784] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360786] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360788] [<c105bc42>] warn_slowpath_null+0x22/0x30 [ 1153.360791] [<c158b909>] skb_release_head_state+0xb9/0xd0 [ 1153.360793] [<c158be90>] skb_release_all+0x10/0x30 [ 1153.360795] [<c158bf06>] kfree_skb+0x36/0x80 [ 1153.360799] [<f8486938>] ? can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360802] [<f8486938>] can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360805] [<f849a12c>] esd_pci402_interrupt+0x34c/0x57a [esd402] [ 1153.360809] [<c10a75b5>] handle_irq_event_percpu+0x35/0x180 [ 1153.360811] [<c10a7623>] ? handle_irq_event_percpu+0xa3/0x180 [ 1153.360813] [<c10a7731>] handle_irq_event+0x31/0x50 [ 1153.360816] [<c10a9c7f>] handle_fasteoi_irq+0x6f/0x120 [ 1153.360818] [<c10a9c10>] ? handle_edge_irq+0x110/0x110 [ 1153.360822] [<c1011b61>] handle_irq+0x71/0x90 [ 1153.360823] <IRQ> [<c168152c>] do_IRQ+0x3c/0xd0 [ 1153.360829] [<c1680b6c>] common_interrupt+0x2c/0x34 [ 1153.360834] [<c107d277>] ? finish_task_switch+0x47/0xf0 [ 1153.360836] [<c167c27b>] __schedule+0x35b/0x7e0 [ 1153.360839] [<c10a5334>] ? console_unlock+0x2c4/0x4d0 [ 1153.360842] [<c13df500>] ? n_tty_receive_buf_common+0x890/0x890 [ 1153.360845] [<c10707b6>] ? process_one_work+0x196/0x370 [ 1153.360847] [<c167c723>] schedule+0x23/0x60 [ 1153.360849] [<c1070de1>] worker_thread+0x161/0x460 [ 1153.360852] [<c1090fcf>] ? __wake_up_locked+0x1f/0x30 [ 1153.360854] [<c1070c80>] ? rescuer_thread+0x2f0/0x2f0 [ 1153.360856] [<c1074f01>] kthread+0xa1/0xc0 [ 1153.360859] [<c1680401>] ret_from_kernel_thread+0x21/0x30 [ 1153.360861] [<c1074e60>] ? kthread_create_on_node+0x110/0x110 [ 1153.360863] ---[ end trace 5ff83639cbb74b35 ]--- This patch replaces the kfree_skb() by dev_kfree_skb_any(). Signed-off-by:
Thomas Körper <thomas.koerper@esd.eu> Signed-off-by:
-
Charles Keepax authored
commit 9da7a5a9 upstream. We should not free any buffers associated with writing out coefficients to the DSP until all the async writes have completed. This patch updates the out of memory path when allocating a new buffer to include a call to regmap_async_complete. Reported-by:
JS Park <aitdark.park@samsung.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Daniel Vetter authored
commit 2208d655 upstream. This reverts the regressing commit 6547fbdb Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Dec 14 23:38:29 2012 +0100 drm/i915: Implement WaSetupGtModeTdRowDispatch that causes GPU hangs immediately on boot. Reported-by:
Leo Wolf <jclw@ymail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79996Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> [Jani: amended the commit message slightly.] Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Dave Hansen authored
commit 2cd3949f upstream. We have some very similarly named command-line options: arch/x86/kernel/cpu/common.c:__setup("noxsave", x86_xsave_setup); arch/x86/kernel/cpu/common.c:__setup("noxsaveopt", x86_xsaveopt_setup); arch/x86/kernel/cpu/common.c:__setup("noxsaves", x86_xsaves_setup); __setup() is designed to match options that take arguments, like "foo=bar" where you would have: __setup("foo", x86_foo_func...); The problem is that "noxsave" actually _matches_ "noxsaves" in the same way that "foo" matches "foo=bar". If you boot an old kernel that does not know about "noxsaves" with "noxsaves" on the command line, it will interpret the argument as "noxsave", which is not what you want at all. This makes the "noxsave" handler only return success when it finds an *exact* match. [ tglx: We really need to make __setup() more robust. ] Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/20141111220133.FE053984@viggo.jf.intel.comSigned-off-by:
-
Maxime COQUELIN authored
commit 00b4d9a1 upstream. On some 32 bits architectures, including x86, GENMASK(31, 0) returns 0 instead of the expected ~0UL. This is the same on some 64 bits architectures with GENMASK_ULL(63, 0). This is due to an overflow in the shift operand, 1 << 32 for GENMASK, 1 << 64 for GENMASK_ULL. Reported-by:
Eric Paire <eric.paire@st.com> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux@rasmusvillemoes.dk Cc: gong.chen@linux.intel.com Cc: John Sullivan <jsrhbz@kanargh.force9.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Fixes: 10ef6b0d ("bitops: Introduce a more generic BITMASK macro") Link: http://lkml.kernel.org/r/1415267659-10563-1-git-send-email-maxime.coquelin@st.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jurgen Kramer authored
commit 6e84a8d7 upstream. This patch adds a USB control message delay quirk for a few specific Marantz/Denon devices. Without the delay the DACs will not work properly and produces the following type of messages: Nov 15 10:09:21 orwell kernel: [ 91.342880] usb 3-13: clock source 41 is not valid, cannot use Nov 15 10:09:21 orwell kernel: [ 91.343775] usb 3-13: clock source 41 is not valid, cannot use There are likely other Marantz/Denon devices using the same USB module which exhibit the same problems. But as this cannot be verified I limited the patch to the devices I could test. The following two devices are covered by this path: - Marantz SA-14S1 - Marantz HD-DAC1 Signed-off-by:
Jurgen Kramer <gtmkramer@xs4all.nl> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Fabio Estevam authored
commit c251ea7b upstream. On a mx28evk with a sgtl5000 codec we notice a loud 'click' sound to happen 5 seconds after the end of a playback. The SMALL_POP bit should fix this, but its definition is incorrect: according to the sgtl5000 manual it is bit 0 of CHIP_REF_CTRL register, not bit 1. Fix the definition accordingly and enable the bit as intended per the code comment. After applying this change, no loud 'click' sound is heard after playback Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Miaoqing Pan authored
commit 4e6ce4dc upstream. Based on the reference clock, which could be 25MHz or 40MHz, AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550. But, when a chip reset is done, processing the initvals sets the register back to the default value. Fix this by moving the code in ath9k_hw_init_pll() to ar9003_hw_override_ini(). Also, do this override for AR9531. Signed-off-by:
Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Sujith Manoharan authored
commit f5ee2b18 upstream. Signed-off-by:
-
Stanislaw Gruszka authored
commit cfd9167a upstream. RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by:
Antti S. Lankila <alankila@bel.fi> Debugged-by:
Henrik Asp <solenskiner@gmail.com> Originally-From: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Ronald Wahl authored
commit 4f031fa9 upstream. Commit 7ec7c4a9 (mac80211: port CCMP to cryptoapi's CCM driver) introduced a regression when decrypting empty packets (data_len == 0). This will lead to backtraces like: (scatterwalk_start) from [<c01312f4>] (scatterwalk_map_and_copy+0x2c/0xa8) (scatterwalk_map_and_copy) from [<c013a5a0>] (crypto_ccm_decrypt+0x7c/0x25c) (crypto_ccm_decrypt) from [<c032886c>] (ieee80211_aes_ccm_decrypt+0x160/0x170) (ieee80211_aes_ccm_decrypt) from [<c031c628>] (ieee80211_crypto_ccmp_decrypt+0x1ac/0x238) (ieee80211_crypto_ccmp_decrypt) from [<c032ef28>] (ieee80211_rx_handlers+0x870/0x1d24) (ieee80211_rx_handlers) from [<c0330c7c>] (ieee80211_prepare_and_rx_handle+0x8a0/0x91c) (ieee80211_prepare_and_rx_handle) from [<c0331260>] (ieee80211_rx+0x568/0x730) (ieee80211_rx) from [<c01d3054>] (__carl9170_rx+0x94c/0xa20) (__carl9170_rx) from [<c01d3324>] (carl9170_rx_stream+0x1fc/0x320) (carl9170_rx_stream) from [<c01cbccc>] (carl9170_usb_tasklet+0x80/0xc8) (carl9170_usb_tasklet) from [<c00199dc>] (tasklet_hi_action+0x88/0xcc) (tasklet_hi_action) from [<c00193c8>] (__do_softirq+0xcc/0x200) (__do_softirq) from [<c0019734>] (irq_exit+0x80/0xe0) (irq_exit) from [<c0009c10>] (handle_IRQ+0x64/0x80) (handle_IRQ) from [<c000c3a0>] (__irq_svc+0x40/0x4c) (__irq_svc) from [<c0009d44>] (arch_cpu_idle+0x2c/0x34) Such packets can appear for example when using the carl9170 wireless driver because hardware sometimes generates garbage when the internal FIFO overruns. This patch adds an additional length check. Fixes: 7ec7c4a9 ("mac80211: port CCMP to cryptoapi's CCM driver") Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit ea9d0d77 upstream. DPCM can update the FE/BE connection states totally asynchronously from the FE's PCM state. Most of FE/BE state changes are protected by mutex, so that they won't race, but there are still some actions that are uncovered. For example, suppose to switch a BE while a FE's stream is running. This would call soc_dpcm_runtime_update(), which sets FE's runtime_update flag, then sets up and starts BEs, and clears FE's runtime_update flag again. When a device emits XRUN during this operation, the PCM core triggers snd_pcm_stop(XRUN). Since the trigger action is an atomic ops, this isn't blocked by the mutex, thus it kicks off DPCM's trigger action. It eventually updates and clears FE's runtime_update flag while soc_dpcm_runtime_update() is running concurrently, and it results in confusion. Usually, for avoiding such a race, we take a lock. There is a PCM stream lock for that purpose. However, as already mentioned, the trigger action is atomic, and we can't take the lock for the whole soc_dpcm_runtime_update() or other operations that include the lengthy jobs like hw_params or prepare. This patch provides an alternative solution. This adds a way to defer the conflicting trigger callback to be executed at the end of FE/BE state changes. For doing it, two things are introduced: - Each runtime_update state change of FEs is protected via PCM stream lock. - The FE's trigger callback checks the runtime_update flag. If it's not set, the trigger action is executed there. If set, mark the pending trigger action and returns immediately. - At the exit of runtime_update state change, it checks whether the pending trigger is present. If yes, it executes the trigger action at this point. Reported-and-tested-by:
Qiao Zhou <zhouqiao@marvell.com> Signed-off-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by:
-
Sagi Grimberg authored
commit 3b726ae2 upstream. In this case the cm_id->context is the isert_np, and the cm_id->qp is NULL, so use that to distinct the cases. Since we don't expect any other events on this cm_id we can just return -1 for explicit termination of the cm_id by the cma layer. Signed-off-by:
-
Or Gerlitz authored
commit f57915cf upstream. This patch adds a max_send_sge=2 minimum in isert_conn_setup_qp() to ensure outgoing control PDU responses with tx_desc->num_sge=2 are able to function correctly. This addresses a bug with RDMA hardware using dev_attr.max_sge=3, that in the original code with the ConnectX-2 work-around would result in isert_conn->max_sge=1 being negotiated. Originally reported by Chris with ocrdma driver. Reported-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Kuninori Morimoto authored
commit 706c6621 upstream. R-Car sound doesn't support PAUSE. Remove SNDRV_PCM_INFO_PAUSE flags from snd_pcm_hardware info Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
commit c1b9b9b1 upstream. FSI doesn't support PAUSE. Remove SNDRV_PCM_INFO_PAUSE flags from snd_pcm_hardware info Signed-off-by:
-
Bart Van Assche authored
commit ab477c1f upstream. It is not guaranteed to that srp_sq_size is supported by the HCA. So if we failed to create the QP with ENOMEM, try with a smaller srp_sq_size. Keep it up until we hit MIN_SRPT_SQ_SIZE, then fail the connection. Reported-by:
Mark Lehrer <lehrer@gmail.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Nicholas Bellinger authored
commit ab8edab1 upstream. This patch addresses a bug where individual vhost-scsi configfs endpoint groups can be removed from below while active exports to QEMU userspace still exist, resulting in an OOPs. It adds a configfs_depend_item() in vhost_scsi_set_endpoint() to obtain an explicit dependency on se_tpg->tpg_group in order to prevent individual vhost-scsi WWPN endpoints from being released via normal configfs methods while an QEMU ioctl reference still exists. Also, add matching configfs_undepend_item() in vhost_scsi_clear_endpoint() to release the dependency, once QEMU's reference to the individual group at /sys/kernel/config/target/vhost/$WWPN/$TPGT is released. (Fix up vhost_scsi_clear_endpoint() error path - DanC) Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Roland Dreier authored
commit 885e7b0e upstream. If an initiator sends a zero-length command (e.g. TEST UNIT READY) but sets the transfer direction in the transport layer to indicate a data-out phase, we still shouldn't try to transfer data. At best it's a NOP, and depending on the transport, we might crash on an uninitialized sg list. Reported-by:
Craig Watson <craig.watson@vanguard-rugged.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Paolo Bonzini authored
commit c1118b36 upstream. On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA. In that case, KVM will fail to patch VMCALL instructions to VMMCALL as required on AMD processors. The failure mode is currently a divide-by-zero exception, which obviously is a KVM bug that has to be fixed. However, picking the right instruction between VMCALL and VMMCALL will be faster and will help if you cannot upgrade the hypervisor. Reported-by:
Chris Webb <chris@arachsys.com> Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Chris J Arges <chris.j.arges@canonical.com> Signed-off-by:
-
- 01 Dec, 2014 1 commit
-
-
David Jeffery authored
commit 92a56555 upstream. If a SIGKILL is sent to a task waiting in __nfs_iocounter_wait, it will busy-wait or soft lockup in its while loop. nfs_wait_bit_killable won't sleep, and the loop won't exit on the error return. Stop the busy-wait by breaking out of the loop when nfs_wait_bit_killable returns an error. Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [ kamal: backport to 3.13-stable: context ] Cc: Moritz Mühlenhoff <muehlenhoff@univention.de> Signed-off-by:
-
- 26 Nov, 2014 1 commit
-
-
NeilBrown authored
commit 45eaf45d upstream. md_check_recovery will skip any recovery and also clear MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set. So when we clear _FROZEN, we must set _NEEDED and ensure that md_check_recovery gets run. Otherwise we could miss out on something that is needed. In particular, this can make it impossible to remove a failed device from an array is the 'recovery-needed' processing didn't happen. Suitable for stable kernels since 3.13. Reported-and-tested-by:
Joe Lawrence <joe.lawrence@stratus.com> Fixes: 30b8feb7Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
