- 21 Mar, 2024 9 commits
-
-
Paolo Abeni authored
says: ==================== MT7530 DSA subdriver fix VLAN egress and handling of all link-local frames This patch series fixes the VLAN tag egress procedure for link-local frames, and fixes handling of all link-local frames. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> ==================== Link: https://lore.kernel.org/r/20240314-b4-for-net-mt7530-fix-link-local-vlan-v2-0-7dbcf6429ba0@arinc9.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Arınç ÜNAL authored
Currently, the MT753X switches treat frames with :01-0D and :0F MAC DAs as regular multicast frames, therefore flooding them to user ports. On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std 802.1Q
™ -2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA must only be propagated to C-VLAN and MAC Bridge components. That means VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports, these frames are supposed to be processed by the CPU (software). So we make the switch only forward them to the CPU port. And if received from a CPU port, forward to a single port. The software is responsible of making the switch conform to the latter by setting a single port as destination port on the special tag. This switch intellectual property cannot conform to this part of the standard fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC DAs, it also includes :22-FF which the scope of propagation is not supposed to be restricted for these MAC DAs. Set frames with :01-03 MAC DAs to be trapped to the CPU port(s). Add a comment for the remaining MAC DAs. Note that the ingress port must have a PVID assigned to it for the switch to forward untagged frames. A PVID is set by default on VLAN-aware and VLAN-unaware ports. However, when the network interface that pertains to the ingress port is attached to a vlan_filtering enabled bridge, the user can remove the PVID assignment from it which would prevent the link-local frames from being trapped to the CPU port. I am yet to see a way to forward link-local frames while preventing other untagged frames from being forwarded too. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: -
Arınç ÜNAL authored
Whether VLAN-aware or not, on every VID VLAN table entry that has the CPU port as a member of it, frames are set to egress the CPU port with the VLAN tag stacked. This is so that VLAN tags can be appended after hardware special tag (called DSA tag in the context of Linux drivers). For user ports on a VLAN-unaware bridge, frame ingressing the user port egresses CPU port with only the special tag. For user ports on a VLAN-aware bridge, frame ingressing the user port egresses CPU port with the special tag and the VLAN tag. This causes issues with link-local frames, specifically BPDUs, because the software expects to receive them VLAN-untagged. There are two options to make link-local frames egress untagged. Setting CONSISTENT or UNTAGGED on the EG_TAG bits on the relevant register. CONSISTENT means frames egress exactly as they ingress. That means egressing with the VLAN tag they had at ingress or egressing untagged if they ingressed untagged. Although link-local frames are not supposed to be transmitted VLAN-tagged, if they are done so, when egressing through a CPU port, the special tag field will be broken. BPDU egresses CPU port with VLAN tag egressing stacked, received on software: 00:01:25.104821 AF Unknown (382365846), length 106: | STAG | | VLAN | 0x0000: 0000 6c27 614d 4143 0001 0000 8100 0001 ..l'aMAC........ 0x0010: 0026 4242 0300 0000 0000 0000 6c27 614d .&BB........l'aM 0x0020: 4143 0000 0000 0000 6c27 614d 4143 0000 AC......l'aMAC.. 0x0030: 0000 1400 0200 0f00 0000 0000 0000 0000 ................ BPDU egresses CPU port with VLAN tag egressing untagged, received on software: 00:23:56.628708 AF Unknown (25215488), length 64: | STAG | 0x0000: 0000 6c27 614d 4143 0001 0000 0026 4242 ..l'aMAC.....&BB 0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC.. 0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC...... 0x0030: 0200 0f00 0000 0000 0000 0000 ............ BPDU egresses CPU port with VLAN tag egressing tagged, received on software: 00:01:34.311963 AF Unknown (25215488), length 64: | Mess | 0x0000: 0000 6c27 614d 4143 0001 0001 0026 4242 ..l'aMAC.....&BB 0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC.. 0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC...... 0x0030: 0200 0f00 0000 0000 0000 0000 ............ To prevent confusing the software, force the frame to egress UNTAGGED instead of CONSISTENT. This way, frames can't possibly be received TAGGED by software which would have the special tag field broken. VLAN Tag Egress Procedure For all frames, one of these options set the earliest in this order will apply to the frame: - EG_TAG in certain registers for certain frames. This will apply to frame with matching MAC DA or EtherType. - EG_TAG in the address table. This will apply to frame at its incoming port. - EG_TAG in the PVC register. This will apply to frame at its incoming port. - EG_CON and [EG_TAG per port] in the VLAN table. This will apply to frame at its outgoing port. - EG_TAG in the PCR register. This will apply to frame at its outgoing port. EG_TAG in certain registers for certain frames: PPPoE Discovery_ARP/RARP: PPP_EG_TAG and ARP_EG_TAG in the APC register. IGMP_MLD: IGMP_EG_TAG and MLD_EG_TAG in the IMC register. BPDU and PAE: BPDU_EG_TAG and PAE_EG_TAG in the BPC register. REV_01 and REV_02: R01_EG_TAG and R02_EG_TAG in the RGAC1 register. REV_03 and REV_0E: R03_EG_TAG and R0E_EG_TAG in the RGAC2 register. REV_10 and REV_20: R10_EG_TAG and R20_EG_TAG in the RGAC3 register. REV_21 and REV_UN: R21_EG_TAG and RUN_EG_TAG in the RGAC4 register. With this change, it can be observed that a bridge interface with stp_state and vlan_filtering enabled will properly block ports now. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: -
Jakub Kicinski authored
Yan Zhai says: ==================== Report RCU QS for busy network kthreads This changeset fixes a common problem for busy networking kthreads. These threads, e.g. NAPI threads, typically will do: * polling a batch of packets * if there are more work, call cond_resched() to allow scheduling * continue to poll more packets when rx queue is not empty We observed this being a problem in production, since it can block RCU tasks from making progress under heavy load. Investigation indicates that just calling cond_resched() is insufficient for RCU tasks to reach quiescent states. This also has the side effect of frequently clearing the TIF_NEED_RESCHED flag on voluntary preempt kernels. As a result, schedule() will not be called in these circumstances, despite schedule() in fact provides required quiescent states. This at least affects NAPI threads, napi_busy_loop, and also cpumap kthread. By reporting RCU QSes in these kthreads periodically before cond_resched, the blocked RCU waiters can correctly progress. Instead of just reporting QS for RCU tasks, these code share the same concern as noted in the commit d28139c4 ("rcu: Apply RCU-bh QSes to RCU-sched and RCU-preempt when safe"). So report a consolidated QS for safety. It is worth noting that, although this problem is reproducible in napi_busy_loop, it only shows up when setting the polling interval to as high as 2ms, which is far larger than recommended 50us-100us in the documentation. So napi_busy_loop is left untouched. Lastly, this does not affect RT kernels, which does not enter the scheduler through cond_resched(). Without the mentioned side effect, schedule() will be called time by time, and clear the RCU task holdouts. V4: https://lore.kernel.org/bpf/cover.1710525524.git.yan@cloudflare.com/ V3: https://lore.kernel.org/lkml/20240314145459.7b3aedf1@kernel.org/t/ V2: https://lore.kernel.org/bpf/ZeFPz4D121TgvCje@debian.debian/ V1: https://lore.kernel.org/lkml/Zd4DXTyCf17lcTfq@debian.debian/#t ==================== Link: https://lore.kernel.org/r/cover.1710877680.git.yan@cloudflare.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yan Zhai authored
When there are heavy load, cpumap kernel threads can be busy polling packets from redirect queues and block out RCU tasks from reaching quiescent states. It is insufficient to just call cond_resched() in such context. Periodically raise a consolidated RCU QS before cond_resched fixes the problem. Fixes: 6710e112 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Reviewed-by:
Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by:
Yan Zhai <yan@cloudflare.com> Acked-by:
Paul E. McKenney <paulmck@kernel.org> Acked-by:
-
Yan Zhai authored
NAPI threads can keep polling packets under load. Currently it is only calling cond_resched() before repolling, but it is not sufficient to clear out the holdout of RCU tasks, which prevent BPF tracing programs from detaching for long period. This can be reproduced easily with following set up: ip netns add test1 ip netns add test2 ip -n test1 link add veth1 type veth peer name veth2 netns test2 ip -n test1 link set veth1 up ip -n test1 link set lo up ip -n test2 link set veth2 up ip -n test2 link set lo up ip -n test1 addr add 192.168.1.2/31 dev veth1 ip -n test1 addr add 1.1.1.1/32 dev lo ip -n test2 addr add 192.168.1.3/31 dev veth2 ip -n test2 addr add 2.2.2.2/31 dev lo ip -n test1 route add default via 192.168.1.3 ip -n test2 route add default via 192.168.1.2 for i in `seq 10 210`; do for j in `seq 10 210`; do ip netns exec test2 iptables -I INPUT -s 3.3.$i.$j -p udp --dport 5201 done done ip netns exec test2 ethtool -K veth2 gro on ip netns exec test2 bash -c 'echo 1 > /sys/class/net/veth2/threaded' ip netns exec test1 ethtool -K veth1 tso off Then run an iperf3 client/server and a bpftrace script can trigger it: ip netns exec test2 iperf3 -s -B 2.2.2.2 >/dev/null& ip netns exec test1 iperf3 -c 2.2.2.2 -B 1.1.1.1 -u -l 1500 -b 3g -t 100 >/dev/null& bpftrace -e 'kfunc:__napi_poll{@=count();} interval:s:1{exit();}' Report RCU quiescent states periodically will resolve the issue. Fixes: 29863d41 ("net: implement threaded-able napi poll loop support") Reviewed-by: -
Yan Zhai authored
When under heavy load, network processing can run CPU-bound for many tens of seconds. Even in preemptible kernels (non-RT kernel), this can block RCU Tasks grace periods, which can cause trace-event removal to take more than a minute, which is unacceptably long. This commit therefore creates a new helper function that passes through both RCU and RCU-Tasks quiescent states every 100 milliseconds. This hard-coded value suffices for current workloads. Suggested-by:
-
Shannon Nelson authored
Add information to our documentation for the XDP features and related ethtool stats. While we're here, we also add the missing timestamp stats. Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240319163534.38796-1-shannon.nelson@amd.comSigned-off-by:
-
Herve Codina authored
The make htmldoc command failed with the following error ... include/linux/bitmap.h:524: ERROR: Unexpected indentation. ... include/linux/bitmap.h:524: CRITICAL: Unexpected section title or transition. Move the visual representation to a literal block. Fixes: de5f8433 ("lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpers") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-kernel/20240312153059.3ffde1b7@canb.auug.org.au/Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Acked-by:
Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20240314120006.458580-1-herve.codina@bootlin.comSigned-off-by:
-
- 20 Mar, 2024 10 commits
-
-
David S. Miller authored
Subbaraya Sundeep says: ==================== octeontx2-pf: RVU Mailbox fixes This patchset fixes the problems related to RVU mailbox. During long run tests some times VF commands like setting MTU or toggling interface fails because VF mailbox is timedout waiting for response from PF. Below are the fixes Patch 1: There are two types of messages in RVU mailbox namely up and down messages. Down messages are synchronous messages where a PF/VF sends a message to AF and AF replies back with response. UP messages are notifications and are asynchronous like AF sending link events to PF. When VF sends a down message to PF, PF forwards to AF and sends the response from AF back to VF. PF has to forward VF messages since there is no path in hardware for VF to send directly to AF. There is one mailbox interrupt from AF to PF when raised could mean two scenarios one is where AF sending reply to PF for a down message sent by PF and another one is AF sending up message asynchronously when link changed for that PF. Receiving the up message interrupt while PF is in middle of forwarding down message causes mailbox errors. Fix this by receiver detecting the type of message from the mbox data register set by sender. Patch 2: During VF driver remove, VF has to wait until last message is completed and then turn off mailbox interrupts from PF. Patch 3: Do not use ordered workqueue for message processing since multiple works are queued simultaneously by all the VFs and PF link UP messages. Patch 4: When sending link event to VF by PF check whether VF is really up to receive this message. Patch 5: In AF driver, use separate interrupt handlers for the AF-VF interrupt and AF-PF interrupt. Sometimes both interrupts are raised to two CPUs at same time and both CPUs execute same function at same time corrupting the data. v2 changes: Added missing mutex unlock in error path in patch 1 Refactored if else logic in patch 1 as suggested by Paolo Abeni ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Subbaraya Sundeep authored
For PF to AF interrupt vector and VF to AF vector same interrupt handler is registered which is causing race condition. When two interrupts are raised to two CPUs at same time then two cores serve same event corrupting the data. Fixes: 7304ac45 ("octeontx2-af: Add mailbox IRQ and msg handlers") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Subbaraya Sundeep authored
When PF sending link status messages to VF, it is possible that by the time link_event_task work function is executed VF might have brought down. Hence before sending VF link status message check whether VF is up to receive it. Fixes: ad513ed9 ("octeontx2-vf: Link event notification support") Signed-off-by:
-
Subbaraya Sundeep authored
Only one execution context for the workqueue used for PF and VFs mailbox communication is incorrect since multiple works are queued simultaneously by all the VFs and PF link UP messages. Hence use default number of execution contexts by passing zero as max_active to alloc_workqueue function. With this fix in place, modify UP messages also to wait until completion. Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by:
-
Subbaraya Sundeep authored
During VF driver remove, a message is sent to detach VF resources to PF but VF is not waiting until message is complete. Also mailbox interrupts need to be turned off after the detach resource message is complete. This patch fixes that problem. Fixes: 05fcc9e0 ("octeontx2-pf: Attach NIX and NPA block LFs") Signed-off-by:
-
Subbaraya Sundeep authored
A single line of interrupt is used to receive up notifications and down reply messages from AF to PF (similarly from PF to its VF). PF acts as bridge and forwards VF messages to AF and sends respsones back from AF to VF. When an async event like link event is received by up message when PF is in middle of forwarding VF message then mailbox errors occur because PF state machine is corrupted. Since VF is a separate driver or VF driver can be in a VM it is not possible to serialize from the start of communication at VF. Hence to differentiate between type of messages at PF this patch makes sender to set mbox data register with distinct values for up and down messages. Sender also checks whether previous interrupt is received before triggering current interrupt by waiting for mailbox data register to become zero. Fixes: 5a6d7c9d ("octeontx2-pf: Mailbox communication with AF") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecJakub Kicinski authored
Steffen Klassert says: ==================== pull request (net): ipsec 2024-03-19 1) Fix possible page_pool leak triggered by esp_output. From Dragos Tatulea. 2) Fix UDP encapsulation in software GSO path. From Leon Romanovsky. * tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Allow UDP encapsulation only in offload modes net: esp: fix bad handling of pages from page_pool ==================== Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.comSigned-off-by:
-
Jiri Pirko authored
Due to a c&p error, port new reply fills-up cmd with wrong value, any other existing port command replies and notifications. Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW. Skimmed through devlink userspace implementations, none of them cares about this cmd value. Reported-by:
Chenyuan Yang <chenyuan0y@gmail.com> Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/ Fixes: cd76dcd6 ("devlink: Support add and delete devlink port") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.usSigned-off-by:
-
Kuniyuki Iwashima authored
syzkaller reported a read of uninit req->syncookie. [0] Originally, req->syncookie was used only in tcp_conn_request() to indicate if we need to encode SYN cookie in SYN+ACK, so the field remains uninitialised in other places. The commit 695751e3 ("bpf: tcp: Handle BPF SYN Cookie in cookie_v[46]_check().") added another meaning in ACK path; req->syncookie is set true if SYN cookie is validated by BPF kfunc. After the change, cookie_v[46]_check() always read req->syncookie, but it is not initialised in the normal SYN cookie case as reported by KMSAN. Let's make sure we always initialise req->syncookie in reqsk_alloc(). [0]: BUG: KMSAN: uninit-value in cookie_v4_check+0x22b7/0x29e0 net/ipv4/syncookies.c:477 cookie_v4_check+0x22b7/0x29e0 net/ipv4/syncookies.c:477 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline] tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652 process_backlog+0x480/0x8b0 net/core/dev.c:5981 __napi_poll+0xe7/0x980 net/core/dev.c:6632 napi_poll net/core/dev.c:6701 [inline] net_rx_action+0x89d/0x1820 net/core/dev.c:6813 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2776/0x52c0 net/core/dev.c:4362 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0x187a/0x1b70 net/ipv4/ip_output.c:235 __ip_finish_output+0x287/0x810 ip_finish_output+0x4b/0x550 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:450 [inline] ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x1e93/0x2030 net/ipv4/ip_output.c:535 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:549 __tcp_transmit_skb+0x3c70/0x4890 net/ipv4/tcp_output.c:1462 tcp_transmit_skb net/ipv4/tcp_output.c:1480 [inline] tcp_write_xmit+0x3ee1/0x8900 net/ipv4/tcp_output.c:2792 __tcp_push_pending_frames net/ipv4/tcp_output.c:2977 [inline] tcp_send_fin+0xa90/0x12e0 net/ipv4/tcp_output.c:3578 tcp_shutdown+0x198/0x1f0 net/ipv4/tcp.c:2716 inet_shutdown+0x33f/0x5b0 net/ipv4/af_inet.c:923 __sys_shutdown_sock net/socket.c:2425 [inline] __sys_shutdown net/socket.c:2437 [inline] __do_sys_shutdown net/socket.c:2445 [inline] __se_sys_shutdown+0x2a4/0x440 net/socket.c:2443 __x64_sys_shutdown+0x6c/0xa0 net/socket.c:2443 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: reqsk_alloc include/net/request_sock.h:148 [inline] inet_reqsk_alloc+0x651/0x7a0 net/ipv4/tcp_input.c:6978 cookie_tcp_reqsk_alloc+0xd4/0x900 net/ipv4/syncookies.c:328 cookie_tcp_check net/ipv4/syncookies.c:388 [inline] cookie_v4_check+0x289f/0x29e0 net/ipv4/syncookies.c:420 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline] tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652 process_backlog+0x480/0x8b0 net/core/dev.c:5981 __napi_poll+0xe7/0x980 net/core/dev.c:6632 napi_poll net/core/dev.c:6701 [inline] net_rx_action+0x89d/0x1820 net/core/dev.c:6813 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554 Uninit was created at: __alloc_pages+0x9a7/0xe00 mm/page_alloc.c:4592 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 reqsk_alloc include/net/request_sock.h:131 [inline] inet_reqsk_alloc+0x66/0x7a0 net/ipv4/tcp_input.c:6978 tcp_conn_request+0x484/0x44e0 net/ipv4/tcp_input.c:7135 tcp_v4_conn_request+0x16f/0x1d0 net/ipv4/tcp_ipv4.c:1716 tcp_rcv_state_process+0x2e5/0x4bb0 net/ipv4/tcp_input.c:6655 tcp_v4_do_rcv+0xbfd/0x10b0 net/ipv4/tcp_ipv4.c:1929 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline] ip_sublist_rcv+0x15f3/0x17f0 net/ipv4/ip_input.c:639 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:674 __netif_receive_skb_list_ptype net/core/dev.c:5581 [inline] __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5629 __netif_receive_skb_list net/core/dev.c:5681 [inline] netif_receive_skb_list_internal+0x106c/0x16f0 net/core/dev.c:5773 gro_normal_list include/net/gro.h:438 [inline] napi_complete_done+0x425/0x880 net/core/dev.c:6113 virtqueue_napi_complete drivers/net/virtio_net.c:465 [inline] virtnet_poll+0x149d/0x2240 drivers/net/virtio_net.c:2211 __napi_poll+0xe7/0x980 net/core/dev.c:6632 napi_poll net/core/dev.c:6701 [inline] net_rx_action+0x89d/0x1820 net/core/dev.c:6813 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554 CPU: 0 PID: 16792 Comm: syz-executor.2 Not tainted 6.8.0-syzkaller-05562-g61387b8d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Fixes: 695751e3 ("bpf: tcp: Handle BPF SYN Cookie in cookie_v[46]_check().") Reported-by:
syzkaller <syzkaller@googlegroups.com> Reported-by:
Eric Dumazet <edumazet@google.com> Closes: https://lore.kernel.org/bpf/CANn89iKdN9c+C_2JAUbc+VY3DDQjAQukMtiBbormAmAk9CdvQA@mail.gmail.com/Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240315224710.55209-1-kuniyu@amazon.comSigned-off-by:
-
Thinh Tran authored
Fix race condition leading to system crash during EEH error handling During EEH error recovery, the bnx2x driver's transmit timeout logic could cause a race condition when handling reset tasks. The bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(), which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload() SGEs are freed using bnx2x_free_rx_sge_range(). However, this could overlap with the EEH driver's attempt to reset the device using bnx2x_io_slot_reset(), which also tries to free SGEs. This race condition can result in system crashes due to accessing freed memory locations in bnx2x_free_rx_sge() 799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp, 800 struct bnx2x_fastpath *fp, u16 index) 801 { 802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; 803 struct page *page = sw_buf->page; .... where sw_buf was set to NULL after the call to dma_unmap_page() by the preceding thread. EEH: Beginning: 'slot_reset' PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset() bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing... bnx2x 0011:01:00.0: enabling device (0140 -> 0142) bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000025065fc Oops: Kernel access of bad area, sig: 11 [#1] ..... Call Trace: [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable) [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0 [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550 [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60 [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170 [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0 [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64 To solve this issue, we need to verify page pool allocations before freeing. Fixes: 4cace675 ("bnx2x: Alloc 4k fragment for each rx ring buffer element") Signed-off-by:Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by:
-
- 19 Mar, 2024 14 commits
-
-
Nikita Kiryushin authored
read_poll_timeout inside phy_read_poll_timeout can set val negative in some cases (for example, __mdiobus_read inside phy_read can return -EOPNOTSUPP). Supposedly, commit 4ec73295 ("net: phylib: fix phy_read*_poll_timeout()") should fix problems with wrong-signed vals, but I do not see how as val is sent to phy_read as is and __val = phy_read (not val) is checked for sign. Change val type for signed to allow better error handling as done in other phy_read_poll_timeout callers. This will not fix any error handling by itself, but allows, for example, to modify cond with appropriate sign check or check resulting val separately. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 014068dc ("net: phy: genphy_loopback: add link speed configuration") Signed-off-by:
Nikita Kiryushin <kiryushin@ancud.ru> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240315175052.8049-1-kiryushin@ancud.ruSigned-off-by:
-
Michal Koutný authored
The commit 2c15a5ae ("net/sched: Load modules via their alias") starts loading modules via aliases and not canonical names. The new aliases were added in commit 241a94ab ("net/sched: Add module aliases for cls_,sch_,act_ modules") via a Coccinele script. sch_fq_pie.c is missing module.h header and thus Coccinele did not patch it. Add the include and module alias manually, so that autoloading works for sch_fq_pie too. (Note: commit message in commit 241a94ab ("net/sched: Add module aliases for cls_,sch_,act_ modules") was mangled due to '#' misinterpretation. The predicate haskernel is: | @ haskernel @ | @@ | | #include <linux/module.h> | .) Fixes: 241a94ab ("net/sched: Add module aliases for cls_,sch_,act_ modules") Signed-off-by:
Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/20240315160210.8379-1-mkoutny@suse.comSigned-off-by:
-
Tobias Brunner authored
Since the referenced commit, the xfrm_inner_extract_output() function uses the protocol field to determine the address family. So not setting it for IPv4 raw sockets meant that such packets couldn't be tunneled via IPsec anymore. IPv6 raw sockets are not affected as they already set the protocol since 9c9c9ad5 ("ipv6: set skb->protocol on tcp, raw and ip6_append_data genereated skbs"). Fixes: f4796398 ("xfrm: Remove inner/outer modes from output path") Signed-off-by:
Tobias Brunner <tobias@strongswan.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/c5d9a947-eb19-4164-ac99-468ea814ce20@strongswan.orgSigned-off-by:
-
Felix Maurer authored
A failure during registration of the netdev notifier was not handled at all. A failure during netlink initialization did not unregister the netdev notifier. Handle failures of netdev notifier registration and netlink initialization. Both functions should only return negative values on failure and thereby lead to the hsr module not being loaded. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
Felix Maurer <fmaurer@redhat.com> Reviewed-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.comSigned-off-by:
-
Yewon Choi authored
acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they are expected to ensure acquire/release memory ordering semantics. However, test_and_set_bit/clear_bit() don't imply such semantics, on top of this, following smp_mb__after_atomic() does not guarantee release ordering (memory barrier actually should be placed before clear_bit()). Instead, we use clear_bit_unlock/test_and_set_bit_lock() here. Fixes: 0f4b1c7e ("rds: fix rds_send_xmit() serialization") Fixes: 1f9ecd7e ("RDS: Pass rds_conn_path to rds_send_xmit()") Signed-off-by:
Yewon Choi <woni9911@gmail.com> Reviewed-by:
Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05Signed-off-by:
-
Jakub Kicinski authored
I "extracted" YNL C into a GitHub repo to make it easier to use in other projects: https://github.com/linux-netdev/ynl-c GitHub actions use Ubuntu by default, and the kernel headers there are missing f329a0eb ("genetlink: correct uAPI defines"). Add the direct include workaround for nlctrl. Fixes: 768e044a ("doc/netlink/specs: Add spec for nlctrl netlink family") Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240315002108.523232-1-kuba@kernel.orgSigned-off-by:
-
Paolo Abeni authored
Jason A. Donenfeld says: ==================== wireguard fixes for 6.9-rc1 This series has four WireGuard fixes: 1) Annotate a data race that KCSAN found by using READ_ONCE/WRITE_ONCE, which has been causing syzkaller noise. 2) Use the generic netdev tstats allocation and stats getters instead of doing this within the driver. 3) Explicitly check a flag variable instead of an empty list in the netlink code, to prevent a UaF situation when paging through GET results during a remove-all SET operation. 4) Set a flag in the RISC-V CI config so the selftests continue to boot. ==================== Link: https://lore.kernel.org/r/20240314224911.6653-1-Jason@zx2c4.comSigned-off-by:
-
Jason A. Donenfeld authored
This option is needed to continue booting with QEMU. Recent changes that made this optional meant that it gets unset in the test harness, and so WireGuard CI has been broken. Fix this by simply setting this option. Cc: stable@vger.kernel.org Fixes: 496ea826 ("RISC-V: provide Kconfig & commandline options to control parsing "riscv,isa"") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
-
Jason A. Donenfeld authored
The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers. Cc: stable@vger.kernel.org Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:
-
Jason A. Donenfeld authored
If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 Cc: stable@vger.kernel.org Fixes: e7096c13 ("net: WireGuard secure network tunnel") Reported-by:Lillian Berry <lillian@star-ark.net> Signed-off-by:
-
Breno Leitao authored
Commit 3e2f544d ("net: get stats64 if device if driver is configured") moved the callback to dev_get_tstats64() to net core, so, unless the driver is doing some custom stats collection, it does not need to set .ndo_get_stats64. Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Signed-off-by:
-
Breno Leitao authored
With commit 34d21de9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in this driver and leverage the network core allocation instead. Signed-off-by:
-
Nikita Zhandarovich authored
Syzkaller with KCSAN identified a data-race issue when accessing keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE() annotations to mark the data race as intentional. BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0: counter_validate drivers/net/wireguard/receive.c:321 [inline] wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461 __napi_poll+0x60/0x3b0 net/core/dev.c:6536 napi_poll net/core/dev.c:6605 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6738 __do_softirq+0xc4/0x279 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499 process_one_work kernel/workqueue.c:2633 [inline] ... read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1: decrypt_packet drivers/net/wireguard/receive.c:252 [inline] wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706 worker_thread+0x525/0x730 kernel/workqueue.c:2787 ... Fixes: a9e90d99 ("wireguard: noise: separate receive counter from send counter") Reported-by: syzbot+d1de830e4ecdaac83d89@syzkaller.appspotmail.com Signed-off-by:Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by:
-
Eric Dumazet authored
dev->state can be read in rx and tx fast paths. netif_running() which needs dev->state is called from - enqueue_to_backlog() [RX path] - __dev_direct_xmit() [TX path] Fixes: 43a71cd6 ("net-device: reorganize net_device fast path variables") Signed-off-by:
-
- 18 Mar, 2024 7 commits
-
-
Abhishek Chauhan authored
This reverts commit 885c36e5. The patch currently broke the bpf selftest test_tc_dtime because uapi field __sk_buff->tstamp_type depends on skb->mono_delivery_time which does not necessarily mean mono with the original fix as the bit was re-used for userspace timestamp as well to avoid tstamp reset in the forwarding path. To solve this we need to keep mono_delivery_time as is and introduce another bit called user_delivery_time and fall back to the initial proposal of setting the user_delivery_time bit based on sk_clockid set from userspace. Fixes: 885c36e5 ("net: Re-use and set mono_delivery_time bit for userspace tstamp packets") Link: https://lore.kernel.org/netdev/bc037db4-58bb-4861-ac31-a361a93841d3@linux.dev/Signed-off-by:
Abhishek Chauhan <quic_abchauha@quicinc.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Arınç ÜNAL authored
On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit value that represents the frequency of the crystal oscillator connected to the switch IC. The field is populated by the state of the ESW_P4_LED_0 and ESW_P4_LED_0 pins, which is done right after reset is deasserted. ESW_P4_LED_0 ESW_P3_LED_0 Frequency ----------------------------------------- 0 0 Reserved 0 1 20MHz 1 0 40MHz 1 1 25MHz On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0 pin is used to populate the bit. 25MHz when the pin is high, 40MHz when it's low. These pins are also used with LEDs, therefore, their state can be set to something other than the bootstrapping configuration. For example, a link may be established on port 3 before the DSA subdriver takes control of the switch which would set ESW_P3_LED_0 to high. Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is described between reset assertion and deassertion. Some switch ICs in real life conditions cannot always have these pins set back to the bootstrapping configuration before reset deassertion in this amount of delay. This causes wrong crystal frequency to be selected which puts the switch in a nonfunctional state after reset deassertion. The tests below are conducted on an MT7530 with a 40MHz crystal oscillator by Justin Swartz. With a cable from an active peer connected to port 3 before reset, an incorrect crystal frequency (0b11 = 25MHz) is selected: [1] [3] [5] : : : _____________________________ __________________ ESW_P4_LED_0 |_______| _____________________________ ESW_P3_LED_0 |__________________________ : : : : : : [4]...: : : [2]................: [1] Reset is asserted. [2] Period of 1000 - 1100 usec. [3] Reset is deasserted. [4] Period of 315 usec. HWTRAP register is populated with incorrect XTAL frequency. [5] Signals reflect the bootstrapped configuration. Increase the delay between reset_control_assert() and reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount ensures a higher possibility that the switch IC will have these pins back to the bootstrapping configuration before reset deassertion. With a cable from an active peer connected to port 3 before reset, the correct crystal frequency (0b10 = 40MHz) is selected: [1] [2-1] [3] [5] : : : : _____________________________ __________________ ESW_P4_LED_0 |_______| ___________________ _______ ESW_P3_LED_0 |_________| |__________________ : : : : : : [2-2]...: [4]...: [2]................: [1] Reset is asserted. [2] Period of 5000 - 5100 usec. [2-1] ESW_P3_LED_0 goes low. [2-2] Remaining period of 5000 - 5100 usec. [3] Reset is deasserted. [4] Period of 310 usec. HWTRAP register is populated with bootstrapped XTAL frequency. [5] Signals reflect the bootstrapped configuration. ESW_P3_LED_0 low period before reset deassertion: 5000 usec - 5100 usec TEST RESET HOLD # (usec) --------------------- 1 5410 2 5440 3 4375 4 5490 5 5475 6 4335 7 4370 8 5435 9 4205 10 4335 11 3750 12 3170 13 4395 14 4375 15 3515 16 4335 17 4220 18 4175 19 4175 20 4350 Min 3170 Max 5490 Median 4342.500 Avg 4466.500 Revert commit 2920dd92 ("net: dsa: mt7530: disable LEDs before reset"). Changing the state of pins via reset assertion is simpler and more efficient than doing so by setting the LED controller off. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch") Co-developed-by:Justin Swartz <justin.swartz@risingedge.co.za> Signed-off-by:
-
David S. Miller authored
Ignat Korchagin says: ==================== net: veth: ability to toggle GRO and XDP independently It is rather confusing that GRO is automatically enabled, when an XDP program is attached to a veth interface. Moreover, it is not possible to disable GRO on a veth, if an XDP program is attached (which might be desirable in some use cases). Make GRO and XDP independent for a veth interface. ==================== Signed-off-by: -
Ignat Korchagin authored
We should be able to independently flip either XDP or GRO states and toggling one should not affect the other. Adjust other tests as well that had implicit expectation that GRO would be automatically enabled. Signed-off-by:
Ignat Korchagin <ignat@cloudflare.com> Signed-off-by:
-
Ignat Korchagin authored
Commit d3256efd ("veth: allow enabling NAPI even without XDP") tried to fix the fact that GRO was not possible without XDP, because veth did not use NAPI without XDP. However, it also introduced the behaviour that GRO is always enabled, when XDP is enabled. While it might be desired for most cases, it is confusing for the user at best as the GRO flag suddenly changes, when an XDP program is attached. It also introduces some complexities in state management as was partially addressed in commit fe9f8013 ("net: veth: clear GRO when clearing XDP even when down"). But the biggest problem is that it is not possible to disable GRO at all, when an XDP program is attached, which might be needed for some use cases. Fix this by not touching the GRO flag on XDP enable/disable as the code already supports switching to NAPI if either GRO or XDP is requested. Link: https://lore.kernel.org/lkml/20240311124015.38106-1-ignat@cloudflare.com/ Fixes: d3256efd ("veth: allow enabling NAPI even without XDP") Fixes: fe9f8013 ("net: veth: clear GRO when clearing XDP even when down") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Leon Romanovsky authored
The missing check of x->encap caused to the situation where GSO packets were created with UDP encapsulation. As a solution return the encap check for non-offloaded SA. Fixes: 983a73da ("xfrm: Pass UDP encapsulation in TX packet offload") Closes: https://lore.kernel.org/all/a650221ae500f0c7cf496c61c96c1b103dcb6f67.camel@redhat.comReported-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Dragos Tatulea authored
When the skb is reorganized during esp_output (!esp->inline), the pages coming from the original skb fragments are supposed to be released back to the system through put_page. But if the skb fragment pages are originating from a page_pool, calling put_page on them will trigger a page_pool leak which will eventually result in a crash. This leak can be easily observed when using CONFIG_DEBUG_VM and doing ipsec + gre (non offloaded) forwarding: BUG: Bad page state in process ksoftirqd/16 pfn:1451b6 page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6 flags: 0x200000000000000(node=0|zone=2) page_type: 0xffffffff() raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000 raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000 page dumped because: page_pool leak Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core] CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x36/0x50 bad_page+0x70/0xf0 free_unref_page_prepare+0x27a/0x460 free_unref_page+0x38/0x120 esp_ssg_unref.isra.0+0x15f/0x200 esp_output_tail+0x66d/0x780 esp_xmit+0x2c5/0x360 validate_xmit_xfrm+0x313/0x370 ? validate_xmit_skb+0x1d/0x330 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x23e/0x350 __dev_queue_xmit+0x337/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x25e/0x580 iptunnel_xmit+0x19b/0x240 ip_tunnel_xmit+0x5fb/0xb60 ipgre_xmit+0x14d/0x280 [ip_gre] dev_hard_start_xmit+0xc3/0x1c0 __dev_queue_xmit+0x208/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x1ca/0x580 ip_sublist_rcv_finish+0x32/0x40 ip_sublist_rcv+0x1b2/0x1f0 ? ip_rcv_finish_core.constprop.0+0x460/0x460 ip_list_rcv+0x103/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x1b3/0x2c0 napi_gro_receive+0xc8/0x200 gro_cell_poll+0x52/0x90 __napi_poll+0x25/0x1a0 net_rx_action+0x28e/0x300 __do_softirq+0xc3/0x276 ? sort_range+0x20/0x20 run_ksoftirqd+0x1e/0x30 smpboot_thread_fn+0xa6/0x130 kthread+0xcd/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x31/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> The suggested fix is to introduce a new wrapper (skb_page_unref) that covers page refcounting for page_pool pages as well. Cc: stable@vger.kernel.org Fixes: 6a5bcd84 ("page_pool: Allow drivers to hint on SKB recycling") Reported-and-tested-by:
Anatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz> Reported-by:
Ian Kumlien <ian.kumlien@gmail.com> Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.comSigned-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
Mina Almasry <almasrymina@google.com> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
