- 29 May, 2024 10 commits
-
-
Avraham Stern authored
Modify iwl_mvm_ftm_set_secured_ranging() parameters to support multiple versions of the target struct. This is done as preparation for moving to the new range request version. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.56d6aee320b3.I5a52fa93cd791d0229b392a20f076b7cebb110cd@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Avraham Stern authored
Move setting the target's sta_id (and related flags) into a function to support different versions of the target struct. This is done as preparation for moving to the new range request version. Signed-off-by:
-
Miri Korenblit authored
This code is intended for internal testing. Remove it. Fixes: 30ce0390 ("wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is low") Signed-off-by:
-
Avraham Stern authored
Move setting the target flags into a dedicated function to support different versions of the target struct. This is done as preparation for moving to the new range request version. Signed-off-by:
-
Johannes Berg authored
6 GHz BSS SP client shall respect TX power limits advertised by the AP in TPE elements, send the data to the firmware using the AP_TX_POWER_CONSTRAINTS_CMD command, so do that. Co-developed-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Miri Korenblit authored
Move IWL_MVM_MIN_BEACON_INTERVAL_TU to constants.h Signed-off-by:
-
Miri Korenblit authored
This is not used and not needed anymore. Signed-off-by:
-
Avri Altman authored
Enable p2p low latency by default. Signed-off-by:
Avri Altman <avri.altman@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
Use the new RX_FLAG_MACTIME_IS_RTAP_TS64 in mac80211 to report a 64-bit timestamp in the mactime for radiotap only, in case we report the synchronized PTP clock timestamp (otherwise we really only have 32 bits anyway). Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Reviewed-by:
Benjamin Berg <benjamin.berg@intel.com> Signed-off-by:
-
Avraham Stern authored
Add a debugfs option to use the ptp clock time for rx device timestamps. This can be useful to e.g. synchronize multiple NICs or reporting the timestamp in the system clock instead of gp2. Signed-off-by:
-
- 23 May, 2024 30 commits
-
-
Johannes Berg authored
In MLO, the deflink BSSID is clearly invalid. Since we fill the addresses as MLD addresses and translate later, use the AP address here instead. This fixes an issue that happens with HW restart, where the DelBA frame is transmitted, but not processed correctly due to the wrong BSSID (or even just discarded entirely). As a result, the BA sessions are kept alive; however, as other state is reset during HW restart, this then fails (reorder, etc.) and data doesn't go through until new BA sessions are established. Reviewed-by:
-
Johannes Berg authored
The negotiated TTLM data must be reset on disconnect, otherwise it may end up getting reused on another connection. Fix that. Fixes: 8f500fbc ("wifi: mac80211: process and save negotiated TID to Link mapping request") Reviewed-by:
-
Johannes Berg authored
There's no need to stop works that have already been stopped during disconnect, so don't. Reviewed-by:
-
Johannes Berg authored
It shouldn't be possible to run this after disconnecting, so cancel the work earlier. Fixes: a17a58ad ("wifi: mac80211: add support for tearing down negotiated TTLM") Reviewed-by:
-
Johannes Berg authored
This work shouldn't run after we're disconnecting. Cancel it earlier (and then don't cancel it in stop later.) Fixes: 8eb8dd2f ("wifi: mac80211: Support link removal using Reconfiguration ML element") Reviewed-by:
Ilan Peer <ilan.peer@intel.com> Reviewed-by:
-
Johannes Berg authored
The worker calculates the wrong sdata pointer, so if it ever runs, it'll crash. Fix that. Fixes: a17a58ad ("wifi: mac80211: add support for tearing down negotiated TTLM") Reviewed-by:
-
Dmitry Antipov authored
Annotate 'sub_specs' of 'struct cfg80211_sar_specs', 'channels' of 'struct cfg80211_sched_scan_request', 'channels' of 'struct cfg80211_wowlan_nd_match', and 'matches' of 'struct cfg80211_wowlan_nd_info' with '__counted_by' attribute. Briefly tested with clang 18.1.1 and CONFIG_UBSAN_BOUNDS running iwlwifi. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240517153332.18271-1-dmantipov@yandex.ruSigned-off-by:
-
Pradeep Kumar Chitrapu authored
Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized to pass EHT MU-MIMO configurations from user space to driver in AP mode. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Link: https://msgid.link/20240515181327.12855-2-quic_pradeepc@quicinc.comSigned-off-by:
-
Johannes Berg authored
There are now three places setting up chanreq.ap which always depends on the mode (EHT being used or not) and override flag. Refactor that code into a common function with a comment, to make that clearer. Reviewed-by:
-
Johannes Berg authored
Handle the transmit power envelope (TPE) element during channel switch, applying it when the channel switch is done. Reviewed-by:
-
Johannes Berg authored
During channel switch, track the AP configuration in the chanreq, so that wider bandwidth OFDMA is taken into account correctly, since multiple channel contexts may be needed due to sharing not being possible due to wider bandwidth OFDMA. Reviewed-by:
-
Johannes Berg authored
Collect the CSA data in ieee80211_link_data_managed and ieee80211_link_data into a csa sub-struct to clean up a bit and make adding new things more obvious. Reviewed-by:
-
Johannes Berg authored
If we see a channel switch announcement on one link for another, handle that case and start the CSA. The driver can react to this in whatever way it needs. The stack will have the ability to track it via the RNR/MLE in the reporting link's beacon if it sees it for inactive links and adjust everything accordingly. Note that currently the timings for the CSA aren't set, the values are only used by the Intel drivers, and they don't need this for newer devices that support MLO, so I've left it out for now. Signed-off-by:
-
Johannes Berg authored
Just like it's not currently possible to start radar detection while already operating, it shouldn't be possible to start operating while radar detection is running. Fix that. Also, improve the check whether operating (carrier might not be up if e.g. attempting to join IBSS). Reviewed-by:
-
Johannes Berg authored
At some point we thought perhaps this could be per link, but really that didn't happen, and it's confusing. Radar detection still uses the deflink to allocate the channel, but the work need not be there. Move it back. Reviewed-by:
-
Anjaneyulu authored
Add support for enable/disable 11be for china and South Korea by reading DSM function 12 from UEFI or ACPI and sending it to the FW. Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Move code that is DVM only to dvm. Signed-off-by:
-
Emmanuel Grumbach authored
This is used by dvm only, move to dvm. Signed-off-by:
-
Miri Korenblit authored
If we exit EMLSR due to a IWL_MVM_ESR_EXIT*, a MLO scan followed by a link selection is scheduled with a delay of 30 seconds. If during that 30 seconds EMLSR was blocked and unblocked (IWL_MVM_ESR_BLOCKED*), we would still want to get the needed data from the MLO scan and select link accordingly, and not return immediately to EMLSR. Fixes: 2f33561e ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR") Signed-off-by:
-
Johannes Berg authored
Add and use an mvm-specific guard for the mvm mutex. Signed-off-by:
-
Johannes Berg authored
There's no need to calculate again whether data should be included or be handled externally, just check if any space for it was already reserved. Signed-off-by:
-
Johannes Berg authored
There's no need to allocate buf1 if we're not going to write anything to it, and the condition for writing is (correctly) "hdr_len > 0 && !iwl_trace_data()". Also allocate the event space only under the same condition. Signed-off-by:
-
Emmanuel Grumbach authored
When we crash the firmware, we need to know why we decided to do so. Almost all the callsites of iwl_force_nmi() print something in the logs that explain why the driver decided to crash the firmware. Debugfs doesn't print anything and it is then hard to understand why the firmware has crashed. Add a simple print in the debugfs hook to ease the debug. Signed-off-by:
-
Miri Korenblit authored
When AUTO_EML is set to false, this change ignores the exit criteria, for testing purposes. Currently, if AUTO_EML is disabled, the driver will not select a link or enter EMLSR, but will still exit if one of the criteria is not fulfilled. Signed-off-by:
-
Benjamin Berg authored
Use ieee80211_vif_type_p2p instead of checking for IFTYPE_AP in combination with vif->p2p. Signed-off-by:
-
Johannes Berg authored
We track which link is using which FW link ID, so there really isn't a need to separately track which link IDs are in use. Remove that code and check the table when looking for a new link ID to use. Signed-off-by:
-
Emmanuel Grumbach authored
All our firmware versions should now be printed in hex. Signed-off-by:
-
Johannes Berg authored
In practice, iwl_trans_get_rxq_dma_data() will not fail, it only can do that if called with the wrong arguments. But it does have an error value and doesn't initialize the argument when it fails, so don't use the value then. Signed-off-by:
-
Mukesh Sisodiya authored
Add new time point to get the details of scan failure While on it added other missing enum to match with FW. Signed-off-by:
-
Johannes Berg authored
The two versions of iwl_mei_set_power_limit() are a bit different, and while really the const isn't all that necessary on the inline, it's still better to have it be the same. Signed-off-by:
-
