- Use def_bool where possible
 - Eliminate PARISC64
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 - Fix all ioremap abuse noticed by CONFIG_DEBUG_IOREMAP on an N4000.
 - F_EXTEND doesn't do what I thought it did on a 32-bit box.
 - New calling convention for txn_alloc_irq()
 - Replace CONFIG_PARISC64 with CONFIG_64BIT
 - Ensure alignment of the irt buffer to 8 bytes even when slab debugging
   is enabled
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 - The pdc_io_reset_devices() call necessary for USB keyboard kills the
   serial console.  Use a test that seems to work for both.
 - Don't bounce >4G buffers on machines with IOMMU
 - Remove ASSERT code and cleanup iomem * related warnings
 - Fix comment that was pointing to the old file location
 - Expand comment about PDC reset to describe broken GFX+USB console at
   powerup by direct linux to serial console
 - Fix all ioremap abuse noticed by CONFIG_DEBUG_IOREMAP on an N4000
 - Remove casts from "READ_REG" and "WRITE_REG" macro
 - Set D4 and DD bits in IOC_CTRL
 - Allow all memory in machine to be in-flight DMA at once, up to 4GB
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 - Use CONFIG_64BIT instead of CONFIG_PARISC64
 - Rename lba_cfg_ops to elroy_cfg_ops
 - Don't check for a non-1,2 or 4 size in the cfg_ops
 - Call LBA_CFG_ADDR_SETUP instead of LBA_CFG_TR4_ADDR_SETUP in elroy_cfg_ops
 - Don't read back from LBA_PCI_CFG_ADDR in LBA_CFG_TR4_ADDR_SETUP
 - Remove LBA_FLAG_NO_DMA_DURING_CFG since it's always set for elroy_cfg_ops
 - Remove LBA_TR4PLUS since we no longer need to test for it.
 - Inline lba_common_init() into lba_driver_probe()
 - Move TR2.1 check into an elroy-only path
 - Check for LBAs that aren't Elroy, Mercury or Quicksilver.
 - Remove all casts to 'int' in the driver, got rid of some unnecessary parens
   and deleted the obsolete part of a comment.
 - Return -EINVAL for config space >255
 - Always return 0 on config read success
 - Remove definitions of TRUE and FALSE
 - ioremap fix for port-io on non-PAT machines
 - Remove the bad casts from the register accessors
 - With those gone, I could see the piop_base needed to be remapped.
 - Fix all ioremap abuse noticed by CONFIG_DEBUG_IOREMAP on an N4000.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Update a500_defconfig
Remove n4000_defconfig as a500_defconfig is now suitable for both boxes
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ALSA Harmony rewrite
Signed-Off-By: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Stuart Brady <sdbrady@ntlworld.com>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add PDC stable storage driver.  Also reorganise PA-RISC Kconfig a little.
Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

PA-RISC firmware needs a hwpath which can be constructed from a pci_dev
or a parisc_device.  Previously we've known what type of device we had,
but when using sysfs we have to figure it out.
Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

More CONFIG_PARISC64 to CONFIG_64BIT conversion
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 - Move include/asm/parport_gsc.h to drivers/parport/
 - Fix gcc 3.4 compilation (redefined extern inline functions are not
   considered for inlining)

From: Joel Soete <joel.soete@tiscali.be>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 - Performance improvement to __clear_user_page_asm
 - White space cleanup
 - 64-bit version of copy_user_page_asm
 - Add prefetching to copy_user_page_asm
 - remove NOP and "bundle" comments

Contributions from Joel Soete
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Here's a trivial patch to get rid of a redundant check that I added
in patch 3/4.  dst_release already checks for dst == NULL.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Here is a patch that replaces all occurrences of dst_pmtu in the TCP
stack.  As a result we no longer need ext2_header_len.

This has a nice synergetic effect with Arnaldo's latest change to
linux/tcp.h :)

I'll be removing other users of dst->path/dst_pmtu next.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is another bug in xfrm_bundle_ok where I forgot to
check the validity of xdst->route.  In fact, the check
on dst->path isn't strong enough either.  For IPv6 entries,
dst->path->obsolete is always negative until you call
ipv6_dst_check.  So we really need to do that here.

Here's the patch to fix those two problems.  Yes I know
my dst_check implementation is lame.  I'll come back and
fix up all the dst_check functions by moving their dst_release
calls out.  It proves that you were right in that IPv6 dst
leak thread :)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

into pobox.com:/garz/repo/libata-2.6

into pobox.com:/garz/repo/libata-dev/remove-one-fix

into pobox.com:/garz/repo/libata-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

For the metrics other than MTU, we should also be getting it from
the top dst as opposed to the bottom dst.  With this change, the
user is able to manipulate values such as advmss for individual
hosts behind a remote IPsec gateway.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let's also fix IPsec PMTU storage.  When we get an MTU update for an
xfrm_dst, it should be done to the top dst, not the bottom dst.

For example, when we get a need-to-frag message for host C behind
a our IPsec peer B, we should be updating the dst entry for C and
not B as we do now.

I've removed the boundary checks since the same checks are done
in ipv[46]/route.c already.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was a lot of fun in laying the foundations.  Now it's time
to start using it.

This patch fixes the calculations in xfrm[46]_output so that we don't
reject properly sized packets from the TCP stack.  The previous
calculation is wrong because the xfrm overhead is not constant.

After this I'll start cleaning stuff up.  For example, tcp's
ext2_header_len and dst's path can both be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Finally this is the patch that sets the MTU values of each xfrm_dst
and keeps it up-to-date.

To recap, at this point we've obtained accurate MTU values at each
xfrm_dst.  The next step would be to start using it as
dst_pmtu(xfrm_dst).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a pointer to the route corresponding to the specific
flow over the SA of an xfrm_dst that's being used.

It also sets the next pointer of each xfrm_dst to the one above it.
This allows to traverse the list upwards from the bottom.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces the function xfrm_state_mtu which calculates
the MTU under a specific SA.  This function can be simplified once
we get rid all other uses of get_max_size as we can move the calculation
into the invidual SA type.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

James is stepping down for a while.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does:
	- consolidate the three implementations of compat_sys_waitid
	  (some were called sys32_waitid).
	- adds sys_waitid syscall to ppc
	- adds sys_waitid and compat_sys_waitid syscalls to ppc64

I have left PARISC and MIPS to their own devices (by request).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>