- 10 Aug, 2019 2 commits
-
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Most of the tests run by fcnal-test.sh relies on the nettest command. Rather than trying to cover all of the individual tests, check for the binary only at the beginning. Also removes the need for log_error which is undefined. Fixes: 6f9d5cac ("selftests: Setup for functional tests for fib and socket lookups") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
- 09 Aug, 2019 38 commits
-
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some bugfixes & optimizations & cleanups for HNS3 driver This patch-set includes code optimizations, bugfixes and cleanups for the HNS3 ethernet controller driver. [patch 01/12] fixes a GFP flag error. [patch 02/12] fixes a VF interrupt error. [patch 03/12] adds a cleanup for VLAN handling. [patch 04/12] fixes a bug in debugfs. [patch 05/12] modifies pause displaying format. [patch 06/12] adds more DFX information for ethtool -d. [patch 07/12] adds more TX statistics information. [patch 08/12] adds a check for TX BD number. [patch 09/12] adds a cleanup for dumping NCL_CONFIG. [patch 10/12] refines function for querying MAC pause statistics. [patch 11/12] adds a handshake with VF when doing PF reset. [patch 12/12] refines some macro definitions. ==================== Signed-off-by: -
Guojia Liao authored
Macro arguments should be enclosed in parentheses, in case of expression argument, but parentheses of pure number in macro definition should be removed for simplicity. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
Before PF asserting function reset, it should make sure that all its VFs have been ready, otherwise, it will cause some hardware errors. So this patch adds function hclge_func_reset_sync_vf() to synchronize VF before asserting PF function reset. For new firmware which supports command HCLGE_OPC_QUERY_VF_RST_RDY, we will try to query VFs' ready status within 30 seconds. And keep the old implementation for compatible with firmware which does not support this command. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
This patch refines the interface for querying MAC pause statistics, and adds structure hns3_mac_stats to keep the count of TX & RX. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Reviewed-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Yufeng Mo authored
This adds a new function hclge_ncl_config_data_print() to print the data of NCL_CONFIG, to make the code more readable. Also, using macro replaces some magic number. Signed-off-by:
-
Yunsheng Lin authored
Hardware supports up to 8 TX BD for non-TSO skb and 63 TX BD for TSO skb. Currently hns3 driver does not check the max BD num that required by a skb before filling desc, which may cause the hardware to issue a RAS error throug PCIe AER. This patch adds the max BD num check before filling desc, if the bd num is not within the hardware limit, it will record the error by ring->stats.sw_err_cnt counter and free the skb. This patch also cleans up the hns3_nic_bd_num function by changing the return type and removing an unnecessary check. Signed-off-by:
-
Yunsheng Lin authored
This patch adds tx_vlan_err, tx_l4_proto_err, tx_l2l3l4_err and tx_tso_err counter to tx process, in order to better debug the desc filling error. This patch also adds a missing u64_stats_update_* around ring->stats.sw_err_cnt and adds hns3_rl_err to limit the error printing in the IO patch. Signed-off-by:
-
Guangbin Huang authored
Now we can use ethtool -d command to dump some registers. However, these registers information is not enough to find out where the problem is. This patch adds DFX registers information after original registers when use ethtool -d commmand to dump registers. Also, using macro replaces some related magic number. Signed-off-by:
-
Yonglong Liu authored
Currently, the pause options of HNS3 shown like this: "RX/TX" is always the same with "RX negotiated/TX negotiated". Because of the driver covered the value of "RX/TX" with the value of "RX negotiated/TX negotiated" after adjust link. This patch records the pause configurations of the user, and never covered them in adjust link. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Reviewed-by:
-
Yufeng Mo authored
If the input length reaches the maximum value of size_t, the reverse is triggered when 1 is added. In addition, there is no need to have such a large length. Therefore, the input length should be checked and the value should be less than or equal to 1024. Signed-off-by:
-
Yunsheng Lin authored
This patch refactors the hns3_fill_desc_vtags function by avoiding passing too many parameters, reducing indent level and some other clean up. This patch also adds the hns3_fill_skb_desc function to fill the first desc of a skb. Signed-off-by:
-
Huazhong Tan authored
Currently, VF driver has two kinds of interrupts, reset & CMDQ RX. For revision 0x21, according to the UM, each interrupt should be cleared by write 0 to the corresponding bit, but the implementation writes 0 to the whole register in fact, it will clear other interrupt at the same time, then the VF will loss the interrupt. But for revision 0x20, this interrupt clear register is a read & write register, for compatible, we just keep the old implementation for 0x20. This patch fixes it, also, adds a new register for reading the interrupt status according to hardware user manual. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Fixes: b90fcc5b ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by:
-
Zhongzhu Liu authored
When CONFIG_DEBUG_ATOMIC_SLEEP on, calling kzalloc with GFP_KERNEL in hclge_mac_update_stats() will get below warning: [ 52.514677] BUG: sleeping function called from invalid context at mm/slab.h:501 [ 52.522051] in_atomic(): 0, irqs_disabled(): 0, pid: 1015, name: ifconfig [ 52.528827] 2 locks held by ifconfig/1015: [ 52.532921] #0: (____ptrval____) (&p->lock){....}, at: seq_read+0x54/0x748 [ 52.539878] #1: (____ptrval____) (rcu_read_lock){....}, at: dev_seq_start+0x0/0x140 [ 52.547610] CPU: 16 PID: 1015 Comm: ifconfig Not tainted 5.3.0-rc3-00697-g20b80be #98 [ 52.555408] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B050.01 08/08/2019 [ 52.564242] Call trace: [ 52.566687] dump_backtrace+0x0/0x1f8 [ 52.570338] show_stack+0x14/0x20 [ 52.573646] dump_stack+0xb4/0xec [ 52.576950] ___might_sleep+0x178/0x198 [ 52.580773] __might_sleep+0x74/0xe0 [ 52.584338] __kmalloc+0x244/0x2d8 [ 52.587744] hclge_mac_update_stats+0xc8/0x1f8 [hclge] [ 52.592870] hclge_update_stats+0xe0/0x170 [hclge] [ 52.597651] hns3_nic_get_stats64+0xa0/0x458 [hns3] [ 52.602514] dev_get_stats+0x58/0x138 [ 52.606165] dev_seq_printf_stats+0x8c/0x280 [ 52.610420] dev_seq_show+0x14/0x40 [ 52.613898] seq_read+0x574/0x748 [ 52.617205] proc_reg_read+0xb4/0x108 [ 52.620857] __vfs_read+0x54/0xa8 [ 52.624162] vfs_read+0xa0/0x190 [ 52.627380] ksys_read+0xc8/0x178 [ 52.630685] __arm64_sys_read+0x40/0x50 [ 52.634509] el0_svc_common.constprop.0+0x120/0x1e0 [ 52.639369] el0_svc_handler+0x50/0x90 [ 52.643106] el0_svc+0x8/0xc So this patch uses GFP_ATOMIC instead of GFP_KERNEL to fix it. Fixes: d174ea75 ("net: hns3: add statistics for PFC frames and MAC control frames") Signed-off-by:Zhongzhu Liu <liuzhongzhu@huawei.com> Reviewed-by:
-
YueHaibing authored
net/sched/sch_taprio.c:680:32: warning: entry_list_policy defined but not used [-Wunused-const-variable=] One of the points of commit a3d43c0d ("taprio: Add support adding an admin schedule") is that it removes support (it now returns "not supported") for schedules using the TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY attribute (which were never used), the parsing of those types of schedules was the only user of this policy. So removing this policy should be fine. Reported-by:
Hulk Robot <hulkci@huawei.com> Suggested-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Holger Hoffstätte authored
Disabling TSO but leaving SG active results is a significant performance drop. Therefore disable also SG on RTL8168evl. This restores the original performance. Fixes: 93681cd7 ("r8169: enable HW csum and TSO") Signed-off-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Josh Hunt authored
TCP_BASE_MSS is used as the default initial MSS value when MTU probing is enabled. Update the comment to reflect this. Suggested-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Josh Hunt <johunt@akamai.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
Josh Hunt authored
The current implementation of TCP MTU probing can considerably underestimate the MTU on lossy connections allowing the MSS to get down to 48. We have found that in almost all of these cases on our networks these paths can handle much larger MTUs meaning the connections are being artificially limited. Even though TCP MTU probing can raise the MSS back up we have seen this not to be the case causing connections to be "stuck" with an MSS of 48 when heavy loss is present. Prior to pushing out this change we could not keep TCP MTU probing enabled b/c of the above reasons. Now with a reasonble floor set we've had it enabled for the past 6 months. The new sysctl will still default to TCP_MIN_SND_MSS (48), but gives administrators the ability to control the floor of MSS probing. Signed-off-by:
-
Jiri Pirko authored
The size of the snapshot has to be the same as the size of the region, therefore no need to pass it again during snapshot creation. Remove the arg and use region->size instead. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
Starting from commit d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog") loopback flows got hurt, because for each skb sent, the socket receives an immediate ACK and sk_flush_backlog() causes extra work. Intent was to not let the backlog grow too much, but we went a bit too far. We can check the backlog every 16 skbs (about 1MB chunks) to increase TCP over loopback performance by about 15 % Note that the call to sk_flush_backlog() handles a single ACK, thanks to coalescing done on backlog, but cleans the 16 skbs found in rtx rb-tree. Reported-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Denis Efremov authored
octeon_mbox_process_cmd() directly writes the PCI_EXP_DEVCTL_BCR_FLR bit, which bypasses timing requirements imposed by the PCIe spec. This patch fixes the function to use the pcie_flr() interface instead. Signed-off-by:
Denis Efremov <efremov@linux.com> Reviewed-by:
Andrew Murray <andrew.murray@arm.com> Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Heiner Kallweit authored
We allocate 16kb per rx buffer, so we can avoid some overhead by using alloc_pages_node directly instead of bothering kmalloc_node. Due to this change buffers are page-aligned now, therefore the alignment check can be removed. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: net/sched/sch_fq_codel.c: In function fq_codel_dequeue: net/sched/sch_fq_codel.c:288:23: warning: variable prev_ecn_mark set but not used [-Wunused-but-set-variable] net/sched/sch_fq_codel.c:288:6: warning: variable prev_drop_count set but not used [-Wunused-but-set-variable] They are not used since commit 77ddaff2 ("fq_codel: Kill useless per-flow dropped statistic") Reported-by:
-
Jiri Pirko authored
Extend existing driver for Spectrum and Spectrum-2 ASICs to support Spectrum-3 ASIC as well. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Improvements for -next [ This is just a rebase of v2 into latest -next in order to avoid a merge conflict ] Couple of improvements for -next tree. More info in commit logs. ==================== Signed-off-by: -
Jose Abreu authored
Add a selftest for the Flexible RX Parser feature. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
XGMAC cores also support the Flexible RX Parser feature. Add the support for it in the XGMAC core. Signed-off-by:
-
Jose Abreu authored
XGMAC also supports Safety Features. This patch implements the configuration and handling of this feature in XGMAC core. Signed-off-by:
-
Jose Abreu authored
Add a selftest for VLAN and Double VLAN Filtering in stmmac. Signed-off-by:
-
Jose Abreu authored
Implement the VLAN Hash Filtering feature in XGMAC core. Signed-off-by:
-
Jose Abreu authored
Add a test for RSS in the stmmac selftests. Signed-off-by:
-
Jose Abreu authored
Implement the RSS functionality and add the corresponding callbacks in XGMAC core. Changes from v1: - Do not use magic constants (Jakub) - Use ethtool_rxfh_indir_default() (Jakub) Signed-off-by:
-
Jose Abreu authored
Implement the TX Queue Priority callback in XGMAC core. Signed-off-by:
-
Jose Abreu authored
Implement the TX Queue Weight callback. In order for this to be active we also need to set ETS algorithm when configuring Queue. Signed-off-by:
-
Jose Abreu authored
Implement the MMC counters feature in XGMAC core. Signed-off-by:
-
John Rutherford authored
Since node internal messages are passed directly to the socket, it is not possible to observe those messages via tcpdump or wireshark. We now remedy this by making it possible to clone such messages and send the clones to the loopback interface. The clones are dropped at reception and have no functional role except making the traffic visible. The feature is enabled if network taps are active for the loopback device. pcap filtering restrictions require the messages to be presented to the receiving side of the loopback device. v3 - Function dev_nit_active used to check for network taps. - Procedure netif_rx_ni used to send cloned messages to loopback device. Signed-off-by:
John Rutherford <john.rutherford@dektech.com.au> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
David S. Miller authored
wenxu says: ==================== flow_offload: add indr-block in nf_table_offload This series patch make nftables offload support the vlan and tunnel device offload through indr-block architecture. The first four patches mv tc indr block to flow offload and rename to flow-indr-block. Because the new flow-indr-block can't get the tcf_block directly. The fifth patch provide a callback list to get flow_block of each subsystem immediately when the device register and contain a block. The last patch make nf_tables_offload support flow-indr-block. This version add a mutex lock for add/del flow_indr_block_ing_cb ==================== Signed-off-by: -
wenxu authored
nftable support indr-block call. It makes nftable an offload vlan and tunnel device. nft add table netdev firewall nft add chain netdev firewall aclout { type filter hook ingress offload device mlx_pf0vf0 priority - 300 \; } nft add rule netdev firewall aclout ip daddr 10.0.0.1 fwd to vlan0 nft add chain netdev firewall aclin { type filter hook ingress device vlan0 priority - 300 \; } nft add rule netdev firewall aclin ip daddr 10.0.0.7 fwd to mlx_pf0vf0 Signed-off-by:wenxu <wenxu@ucloud.cn> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
wenxu authored
It provide a callback list to find the blocks of tc and nft subsystems Signed-off-by:
-
