- 13 Dec, 2021 11 commits
-
-
Russell King (Oracle) authored
axienet has a PCS, but does not make use of the phylink PCS support. Mark it was a pre-March 2020 driver. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Static variables do not need to be initialised to 0, because compiler will initialise all uninitialised statics to 0. Thus, remove the unneeded initializations. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Alex Elder authored
Update the definition of the IPA interconnects for IPA v4.5 so the path between IPA and system memory is represented by a single "memory" interconnect. Tested-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
The first two interconnects defined for IPA on the SDX55 SoC are really two parts of what should be represented as a single path between IPA and system memory. Fix this by combining the "memory-a" and "memory-b" interconnects into a single "memory" interconnect. Reported-by:
David Heidelberg <david@ixit.cz> Tested-by:
-
Joanne Koong authored
This patch enables the "/proc/sys/net/unix/max_dgram_qlen" sysctl to be exposed to non-init user namespaces. max_dgram_qlen is used as the default "sk_max_ack_backlog" value for when a unix socket is created. Currently, when a networking namespace is initialized, its unix sysctls are exposed only if the user namespace that "owns" it is the init user namespace. If there is an non-init user namespace that "owns" a networking namespace (for example, in the case after we call clone() with both CLONE_NEWUSER and CLONE_NEWNET set), the sysctls are hidden from view and not configurable. Exposing the unix sysctl is safe because any changes made to it will be limited in scope to the networking namespace the non-init user namespace "owns" and has privileges over (changes won't affect any other net namespace). There is also no possibility of a non-privileged user namespace messing up the net namespace sysctls it shares with its parent user namespace. When a new user namespace is created without unsharing the network namespace (eg calling clone() with CLONE_NEWUSER), the new user namespace shares its parent's network namespace. Write access is protected by the mode set in the sysctl's ctl_table (and enforced by procfs). Here in the case of "max_dgram_qlen", 0644 is set; only the user owner has write access. v1 -> v2: * Add more detail to commit message, specify the "/proc/sys/net/unix/max_dgram_qlen" sysctl in commit message. Signed-off-by:
Joanne Koong <joannekoong@fb.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
On PREEMPT_RT the seqcount_t for synchronisation is required on 32bit architectures even on UP because the softirq (and the threaded IRQ handler) can be preempted. With the seqcount_t for synchronisation, a reader with higher priority can preempt the writer and then spin endlessly in read_seqcount_begin() while the writer can't make progress. To avoid such a lock up on PREEMPT_RT the writer must disable preemption during the update. There is no need to disable interrupts because no writer is using this API in hard-IRQ context on PREEMPT_RT. Disable preemption on 32bit-RT within the u64_stats write section. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
David S. Miller authored
Guillaume Nault says: ==================== bareudp: Remove unused code from header file Stop exporting unused functions and structures in bareudp.h. The only piece of bareudp.h that is actually used is netif_is_bareudp(). The rest can be moved to bareudp.c or even dropped entirely. ==================== Signed-off-by: -
Guillaume Nault authored
This structure is used only in bareudp.c. While there, adjust include files: we need netdevice.h, not skbuff.h. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Guillaume Nault authored
There's no user for this function. Signed-off-by:
-
Xin Long authored
When key_exchange is disabled, there is no reason to accept MSG_CRYPTO msgs if it doesn't send MSG_CRYPTO msgs. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
Xiaoliang Yang authored
In DMA threshold mode, frame underflow errors may sometimes occur when the TC(threshold control) value is not enough. The TC value need to be bumped up in this case. There is no underflow interrupt bit on DMA_CH(#i)_Status of dwmac4, so the DMA threshold cannot be bumped up in stmmac_dma_interrupt(). The i.mx8mp board observed an underflow error while running NFS boot, the NFS rootfs could not be mounted. The underflow error can be got from the DMA descriptor TDES3 on dwmac4. This patch bump up tc value once underflow error is got from TDES3. Signed-off-by:
Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by:
-
- 12 Dec, 2021 14 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== Replace DSA dp->priv with tagger-owned storage Ansuel's recent work on qca8k register access over Ethernet: https://patchwork.kernel.org/project/netdevbpf/cover/20211207145942.7444-1-ansuelsmth@gmail.com/ has triggered me to do something which I should've done for a longer time: https://patchwork.kernel.org/project/netdevbpf/patch/20211109095013.27829-7-martin.kaistra@linutronix.de/#24585521 which is to replace dp->priv with something that has less caveats. The dp->priv was introduced when sja1105 needed to hold stateful information in the tagging protocol driver. In that design, dp->priv held memory allocated by the switch driver, because the tagging protocol driver design was 100% stateless. Some years have passed and others have started to feel the need for stateful information kept by the tagger, as well as passing data back and forth between the tagging protocol driver and the switch driver. This isn't possible cleanly in DSA due to a circular dependency which leads to broken module autoloading: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ This patchset introduces a framework that resembles something normal, which allows data to be passed from the tagging protocol driver (things like switch management packets, which aren't intended for the network stack) to the switch driver, while the tagging protocol still remains more or less stateless. The overall design of the framework was discussed with Ansuel too and it appears to be flexible enough to cover the "register access over Ethernet" use case. Additionally, the existing uses of dp->priv, which have mainly to do with PTP timestamping, have also been migrated. Changes in v2: Fix transient build breakage in patch 5/11 due to a missing parenthesis, https://patchwork.hopto.org/static/nipa/592567/12665213/build_clang/ and another transient build warning in patch 4/11 that for some reason doesn't appear in my W=1 C=1 build. https://patchwork.hopto.org/static/nipa/592567/12665209/build_clang/stderr ==================== Signed-off-by:
-
Vladimir Oltean authored
All current in-tree uses of dp->priv have been replaced with ds->tagger_data, which provides for a safer API especially when the connection isn't the regular 1:1 link between one switch driver and one tagging protocol driver, but could be either one switch to many taggers, or many switches to one tagger. Therefore, we can remove this unused pointer. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The sja1105 driver messes with the tagging protocol's state when PTP RX timestamping is enabled/disabled. This is fundamentally necessary because the tagger needs to know what to do when it receives a PTP packet. If RX timestamping is enabled, then a metadata follow-up frame is expected, and this holds the (partial) timestamp. So the tagger plays hide-and-seek with the network stack until it also gets the metadata frame, and then presents a single packet, the timestamped PTP packet. But when RX timestamping isn't enabled, there is no metadata frame expected, so the hide-and-seek game must be turned off and the packet must be delivered right away to the network stack. Considering this, we create a pseudo isolation by devising two tagger methods callable by the switch: one to get the RX timestamping state, and one to set it. Since we can't export symbols between the tagger and the switch driver, these methods are exposed through function pointers. After this change, the public portion of the sja1105_tagger_data contains only function pointers. Signed-off-by:
-
Vladimir Oltean authored
This reverts commit 6d709cad. The above change was done to avoid calling symbols exported by the switch driver from the tagging protocol driver. With the tagger-owned storage model, we have a new option on our hands, and that is for the switch driver to provide a data consumer handler in the form of a function pointer inside the ->connect_tag_protocol() method. Having a function pointer avoids the problems of the exported symbols approach. By creating a handler for metadata frames holding TX timestamps on SJA1110, we are able to eliminate an skb queue from the tagger data, and replace it with a simple, and stateless, function pointer. This skb queue is now handled exclusively by sja1105_ptp.c, which makes the code easier to follow, as it used to be before the reverted patch. Signed-off-by:
-
Vladimir Oltean authored
Currently, struct sja1105_tagger_data is a part of struct sja1105_private, and is used by the sja1105 driver to populate dp->priv. With the movement towards tagger-owned storage, the sja1105 driver should not be the owner of this memory. This change implements the connection between the sja1105 switch driver and its tagging protocol, which means that sja1105_tagger_data no longer stays in dp->priv but in ds->tagger_data, and that the sja1105 driver now only populates the sja1105_port_deferred_xmit callback pointer. The kthread worker is now the responsibility of the tagger. The sja1105 driver also alters the tagger's state some more, especially with regard to the PTP RX timestamping state. This will be fixed up a bit in further changes. Signed-off-by:
-
Vladimir Oltean authored
The TX timestamp ID is incremented by the SJA1110 PTP timestamping callback (->port_tx_timestamp) for every packet, when cloning it. It isn't used by the tagger at all, even though it sits inside the struct sja1105_tagger_data. Also, serialization to this structure is currently done through tagger_data->meta_lock, which is a cheap hack because the meta_lock isn't used for anything else on SJA1110 (sja1105_rcv_meta_state_machine isn't called). This change moves ts_id from sja1105_tagger_data to sja1105_private and introduces a dedicated spinlock for it, also in sja1105_private. Signed-off-by:
-
Vladimir Oltean authored
The design of the sja1105 tagger dp->priv is that each port has a separate struct sja1105_port, and the sp->data pointer points to a common struct sja1105_tagger_data. We have removed all per-port members accessible by the tagger, and now only struct sja1105_tagger_data remains. Make dp->priv point directly to this. Signed-off-by:
-
Vladimir Oltean authored
This tagger property is in fact not used at all by the tagger, only by the switch driver. Therefore it makes sense to be moved to sja1105_private. Signed-off-by:
-
Vladimir Oltean authored
When the ocelot-8021q driver was converted to deferred xmit as part of commit 8d5f7954 ("net: dsa: felix: break at first CPU port during init and teardown"), the deferred implementation was deliberately made subtly different from what sja1105 has. The implementation differences lied on the following observations: - There might be a race between these two lines in tag_sja1105.c: skb_queue_tail(&sp->xmit_queue, skb_get(skb)); kthread_queue_work(sp->xmit_worker, &sp->xmit_work); and the skb dequeue logic in sja1105_port_deferred_xmit(). For example, the xmit_work might be already queued, however the work item has just finished walking through the skb queue. Because we don't check the return code from kthread_queue_work, we don't do anything if the work item is already queued. However, nobody will take that skb and send it, at least until the next timestampable skb is sent. This creates additional (and avoidable) TX timestamping latency. To close that race, what the ocelot-8021q driver does is it doesn't keep a single work item per port, and a skb timestamping queue, but rather dynamically allocates a work item per packet. - It is also unnecessary to have more than one kthread that does the work. So delete the per-port kthread allocations and replace them with a single kthread which is global to the switch. This change brings the two implementations in line by applying those observations to the sja1105 driver as well. Signed-off-by:
-
Vladimir Oltean authored
This code is not necessary and complicates the conversion of this driver to tagger-owned memory. If there is a PTP packet that is sent concurrently with the port getting disabled, the deferred xmit mechanism is robust enough to time out when it sees that it hasn't been delivered, and recovers. Signed-off-by:
-
Vladimir Oltean authored
The felix driver makes very light use of dp->priv, and the tagger is effectively stateless. dp->priv is practically only needed to set up a callback to perform deferred xmit of PTP and STP packets using the ocelot-8021q tagging protocol (the main ocelot tagging protocol makes no use of dp->priv, although this driver sets up dp->priv irrespective of actual tagging protocol in use). struct felix_port (what used to be pointed to by dp->priv) is removed and replaced with a two-sided structure. The public side of this structure, visible to the switch driver, is ocelot_8021q_tagger_data. The private side is ocelot_8021q_tagger_private, and the latter structure physically encapsulates the former. The public half of the tagger data structure can be accessed through a helper of the same name (ocelot_8021q_tagger_data) which also sanity-checks the protocol currently in use by the switch. The public/private split was requested by Andrew Lunn. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vladimir Oltean authored
Ansuel is working on register access over Ethernet for the qca8k switch family. This requires the qca8k tagging protocol driver to receive frames which aren't intended for the network stack, but instead for the qca8k switch driver itself. The dp->priv is currently the prevailing method for passing data back and forth between the tagging protocol driver and the switch driver. However, this method is riddled with caveats. The DSA design allows in principle for any switch driver to return any protocol it desires in ->get_tag_protocol(). The dsa_loop driver can be modified to do just that. But in the current design, the memory behind dp->priv has to be allocated by the switch driver, so if the tagging protocol is paired to an unexpected switch driver, we may end up in NULL pointer dereferences inside the kernel, or worse (a switch driver may allocate dp->priv according to the expectations of a different tagger). The latter possibility is even more plausible considering that DSA switches can dynamically change tagging protocols in certain cases (dsa <-> edsa, ocelot <-> ocelot-8021q), and the current design lends itself to mistakes that are all too easy to make. This patch proposes that the tagging protocol driver should manage its own memory, instead of relying on the switch driver to do so. After analyzing the different in-tree needs, it can be observed that the required tagger storage is per switch, therefore a ds->tagger_data pointer is introduced. In principle, per-port storage could also be introduced, although there is no need for it at the moment. Future changes will replace the current usage of dp->priv with ds->tagger_data. We define a "binding" event between the DSA switch tree and the tagging protocol. During this binding event, the tagging protocol's ->connect() method is called first, and this may allocate some memory for each switch of the tree. Then a cross-chip notifier is emitted for the switches within that tree, and they are given the opportunity to fix up the tagger's memory (for example, they might set up some function pointers that represent virtual methods for consuming packets). Because the memory is owned by the tagger, there exists a ->disconnect() method for the tagger (which is the place to free the resources), but there doesn't exist a ->disconnect() method for the switch driver. This is part of the design. The switch driver should make minimal use of the public part of the tagger data, and only after type-checking it using the supplied "proto" argument. In the code there are in fact two binding events, one is the initial event in dsa_switch_setup_tag_protocol(). At this stage, the cross chip notifier chains aren't initialized, so we call each switch's connect() method by hand. Then there is dsa_tree_bind_tag_proto() during dsa_tree_change_tag_proto(), and here we have an old protocol and a new one. We first connect to the new one before disconnecting from the old one, to simplify error handling a bit and to ensure we remain in a valid state at all times. Co-developed-by:
Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by:
-
Tobias Waldekranz authored
In a typical mv88e6xxx switch tree like this: CPU | .----. .--0--. | .--0--. | sw0 | | | sw1 | '-1-2-' | '-1-2-' '---' If sw1p{1,2} are added to a bridge that sw0p1 is not a part of, sw0 still needs to add a crosschip PVT entry for the virtual DSA device assigned to represent the bridge. Fixes: ce5df689 ("net: dsa: mv88e6xxx: map virtual bridges with forwarding offload in the PVT") Signed-off-by:Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
-
xu xin authored
Inside netns owned by non-init userns, sysctls about ARP/neighbor is currently not visible and configurable. For the attributes these sysctls correspond to, any modifications make effects on the performance of networking(ARP, especilly) only in the scope of netns, which does not affect other netns. Actually, some tools via netlink can modify these attribute. iproute2 is an example. see as follows: $ unshare -ur -n $ cat /proc/sys/net/ipv4/neigh/lo/retrans_time cat: can't open '/proc/sys/net/ipv4/neigh/lo/retrans_time': No such file or directory $ ip ntable show dev lo inet arp_cache dev lo refcnt 1 reachable 19494 base_reachable 30000 retrans 1000 gc_stale 60000 delay_probe 5000 queue 101 app_probes 0 ucast_probes 3 mcast_probes 3 anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000 inet6 ndisc_cache dev lo refcnt 1 reachable 42394 base_reachable 30000 retrans 1000 gc_stale 60000 delay_probe 5000 queue 101 app_probes 0 ucast_probes 3 mcast_probes 3 anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0 $ ip ntable change name arp_cache dev <if> retrans 2000 inet arp_cache dev lo refcnt 1 reachable 22917 base_reachable 30000 retrans 2000 gc_stale 60000 delay_probe 5000 queue 101 app_probes 0 ucast_probes 3 mcast_probes 3 anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000 inet6 ndisc_cache dev lo refcnt 1 reachable 35524 base_reachable 30000 retrans 1000 gc_stale 60000 delay_probe 5000 queue 101 app_probes 0 ucast_probes 3 mcast_probes 3 anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0 Reported-by:Zeal Robot <zealci@zte.com.cn> Signed-off-by:
xu xin <xu.xin16@zte.com.cn> Acked-by:
-
- 11 Dec, 2021 13 commits
-
-
Jakub Kicinski authored
Clément Léger says: ==================== Add FDMA support on ocelot switch driver This series adds support for the Frame DMA present on the VSC7514 switch. The FDMA is able to extract and inject packets on the various ethernet interfaces present on the switch. ==================== Link: https://lore.kernel.org/r/20211209154911.3152830-1-clement.leger@bootlin.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Clément Léger authored
Ethernet frames can be extracted or injected autonomously to or from the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data structures in memory are used for injecting or extracting Ethernet frames. The FDMA generates interrupts when frame extraction or injection is done and when the linked lists need updating. The FDMA is shared between all the ethernet ports of the switch and uses a linked list of descriptors (DCB) to inject and extract packets. Before adding descriptors, the FDMA channels must be stopped. It would be inefficient to do that each time a descriptor would be added so the channels are restarted only once they stopped. Both channels uses ring-like structure to feed the DCBs to the FDMA. head and tail are never touched by hardware and are completely handled by the driver. On top of that, page recycling has been added and is mostly taken from gianfar driver. Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Signed-off-by:
-
Clément Léger authored
This commit adds support for changing MTU for the ocelot register based interface. For ocelot, JUMBO frame size can be set up to 25000 bytes but has been set to 9000 which is a saner value and allows for maximum gain of performance with FDMA. Reviewed-by:
-
Clément Léger authored
In order to support PTP in FDMA, PTP handling code is needed. Since this is the same as for register-based extraction, export it with a new ocelot_ptp_rx_timestamp() function. Reviewed-by:
-
Clément Léger authored
FDMA will need this code to prepare the injection frame header when sending SKBs. Move this code into ocelot_ifh_port_set() and add conditional IFH setting for vlan and rew op if they are not set. Reviewed-by:
-
Jakub Kicinski authored
M Chetan Kumar says: ==================== net: wwan: iosm: improvements This patch series brings in IOSM driver improvments. PATCH1: Set tx queue len. PATCH2: Release data channel if there is no active IP session. PATCH3: Removes dead code. PATCH4: Correct open parenthesis alignment. ==================== Link: https://lore.kernel.org/r/20211209143230.3054755-1-m.chetan.kumar@linux.intel.comSigned-off-by:
-
M Chetan Kumar authored
Fix checkpatch warning in iosm_ipc_mmio.c - Alignment should match open parenthesis Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
-
M Chetan Kumar authored
ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is not defined. Removed the dead code. Signed-off-by:
-
M Chetan Kumar authored
If there is no active IP session (interface up & running) then release the data channel. Use nr_sessions variable to track current active IP sessions. If the count drops to 0, then send pipe close ctrl message to release the data channel. Signed-off-by:
-
M Chetan Kumar authored
Set wwan net dev tx queue len to DEFAULT_TX_QUEUE_LEN. Signed-off-by:
-
Colin Foster authored
commit 32ecd22b ("net: mscc: ocelot: split register definitions to a separate file") left out an include for <soc/mscc/ocelot_vcap.h>. It was missed because the only consumer was ocelot_vsc7514.h, which already included ocelot_vcap. Fixes: 32ecd22b ("net: mscc: ocelot: split register definitions to a separate file") Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211209074010.1813010-1-colin.foster@in-advantage.comSigned-off-by:
-
Erik Ekman authored
The BR-series installation guide from https://driverdownloads.qlogic.com/ mentions the cards support 10Gbase-SR/LR as well as direct attach cables. The cards only have SFP+ ports, so 10000baseT is not the right mode. Switch to using more specific link modes added in commit 5711a982 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Only compile tested. Signed-off-by:
Erik Ekman <erik@kryo.se> Link: https://lore.kernel.org/r/20211208230022.153496-1-erik@kryo.seSigned-off-by:
-
Kuniyuki Iwashima authored
This patch moves sock_release_ownership() down in include/net/sock.h and replaces some sk_lock.owned tests with sock_owned_by_user_nocheck(). Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.co.jp> Link: https://lore.kernel.org/r/20211208062158.54132-1-kuniyu@amazon.co.jpSigned-off-by:
-
- 10 Dec, 2021 2 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Andrii Nakryiko says: ==================== bpf-next 2021-12-10 v2 We've added 115 non-merge commits during the last 26 day(s) which contain a total of 182 files changed, 5747 insertions(+), 2564 deletions(-). The main changes are: 1) Various samples fixes, from Alexander Lobakin. 2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov. 3) A batch of new unified APIs for libbpf, logging improvements, version querying, etc. Also a batch of old deprecations for old APIs and various bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko. 4) BPF documentation reorganization and improvements, from Christoph Hellwig and Dave Tucker. 5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in libbpf, from Hengqi Chen. 6) Verifier log fixes, from Hou Tao. 7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong. 8) Extend branch record capturing to all platforms that support it, from Kajol Jain. 9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi. 10) bpftool doc-generating script improvements, from Quentin Monnet. 11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet. 12) Deprecation warning fix for perf/bpf_counter, from Song Liu. 13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf, from Tiezhu Yang. 14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song. 15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun, and others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits) libbpf: Add "bool skipped" to struct bpf_map libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition bpftool: Switch bpf_object__load_xattr() to bpf_object__load() selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr() selftests/bpf: Add test for libbpf's custom log_buf behavior selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load() libbpf: Deprecate bpf_object__load_xattr() libbpf: Add per-program log buffer setter and getter libbpf: Preserve kernel error code and remove kprobe prog type guessing libbpf: Improve logging around BPF program loading libbpf: Allow passing user log setting through bpf_object_open_opts libbpf: Allow passing preallocated log_buf when loading BTF into kernel libbpf: Add OPTS-based bpf_btf_load() API libbpf: Fix bpf_prog_load() log_buf logic for log_level 0 samples/bpf: Remove unneeded variable bpf: Remove redundant assignment to pointer t selftests/bpf: Fix a compilation warning perf/bpf_counter: Use bpf_map_create instead of bpf_create_map samples: bpf: Fix 'unknown warning group' build warning on Clang samples: bpf: Fix xdp_sample_user.o linking with Clang ... ==================== Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.orgSigned-off-by: -
Shuyi Cheng authored
Fix error: "failed to pin map: Bad file descriptor, path: /sys/fs/bpf/_rodata_str1_1." In the old kernel, the global data map will not be created, see [0]. So we should skip the pinning of the global data map to avoid bpf_object__pin_maps returning error. Therefore, when the map is not created, we mark “map->skipped" as true and then check during relocation and during pinning. Fixes: 16e0c35c ("libbpf: Load global data maps lazily on legacy kernels") Signed-off-by:
Shuyi Cheng <chengshuyi@linux.alibaba.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org>
-
