Causes error: drivers/crypto/ux500/cryp/Makefile:5: *** missing
separator.  Stop.

Fixes: af873fce ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194")
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull yet more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
  these matches are included here, a number of "non-obvious" variants of
  text have been found but those have been postponed for later review
  and analysis.

  There is also a patch in here to add the proper SPDX header to a bunch
  of Kbuild files that we have missed in the past due to new files being
  added and forgetting that Kbuild uses two different file names for
  Makefiles. This issue was reported by the Kbuild maintainer.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
  treewide: Add SPDX license identifier - Kbuild
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
  ...

Pull staging and IIO driver fixes from Greg KH:
 "Here are some Staging and IIO driver fixes to resolve some reported
  problems for 5.2-rc3.

  Nothing major here, just some tiny changes, full details are in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: kpc2000: Add dependency on MFD_CORE to kconfig symbol 'KPC2000'
  staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup()
  staging: vc04_services: prevent integer overflow in create_pagelist()
  Staging: vc04_services: Fix a couple error codes
  staging: wlan-ng: fix adapter initialization failure
  staging: kpc2000: double unlock in error handling in kpc_dma_transfer()
  staging: kpc2000: Fix build error without CONFIG_UIO
  staging: kpc2000: fix build error on xtensa
  staging: erofs: set sb->s_root to NULL when failing from __getname()
  iio: adc: ti-ads8688: fix timestamp is not updated in buffer
  iio: dac: ds4422/ds4424 fix chip verification
  iio: imu: mpu6050: Fix FIFO layout for ICM20602
  iio: adc: ads124: avoid buffer overflow
  iio: adc: modify NPCM ADC read reference voltage

Pull tty/serial driver fixes from Greg KH:
 "Here are some small serial and TTY driver fixes for 5.2-rc3.

  Nothing major, just a number of fixes for reported issues. The fbcon
  core fix also resolves an issue, and was acked by the relevant
  maintainer to go through this tree.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt/fbcon: deinitialize resources in visual_init() after failed memory allocation
  tty: max310x: Fix external crystal register setup
  serial: sh-sci: disable DMA for uart_console
  serial: imx: remove log spamming error message
  tty: serial: msm_serial: Fix XON/XOFF

Pull USB fixes from Greg KH:
 "Here are some tiny USB fixes for a number of reported issues for
  5.2-rc3.

  Nothing huge here, just a small collection of xhci and other driver
  bugs that syzbot has been finding in some drivers. There is also a
  usbip fix and a fix for the usbip fix in here :)

  All have been in linux-next with no reported issues"

* tag 'usb-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usbip: usbip_host: fix stub_dev lock context imbalance regression
  media: smsusb: better handle optional alignment
  xhci: Use %zu for printing size_t type
  xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()
  xhci: Fix immediate data transfer if buffer is already DMA mapped
  usb: xhci: avoid null pointer deref when bos field is NULL
  usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint()
  xhci: update bounce buffer with correct sg num
  media: usb: siano: Fix false-positive "uninitialized variable" warning
  USB: rio500: update Documentation
  USB: rio500: simplify locking
  USB: rio500: fix memory leak in close after disconnect
  USB: rio500: refuse more than one device at a time
  usbip: usbip_host: fix BUG: sleeping function called from invalid context
  USB: sisusbvga: fix oops in error path of sisusb_probe
  USB: Add LPM quirk for Surface Dock GigE adapter
  media: usb: siano: Fix general protection fault in smsusb
  usb: mtu3: fix up undefined reference to usb_debug_root
  USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor

Pull drm fixes from Dave Airlie:
 "Nothing too crazy, pretty quiet, maybe too quiet.

  amdgpu:
   - a fixed version of the raven firmware fix we previously reverted
   - stolen memory fix

  imx:
   - regression fix

  qxl:
   - remove a bad warning

  etnaviv:
   - VM locking fix"

* tag 'drm-fixes-2019-05-31' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: reserve stollen vram for raven series
  drm/etnaviv: lock MMU while dumping core
  drm/imx: ipuv3-plane: fix atomic update status query for non-plus i.MX6Q
  drm/qxl: drop WARN_ONCE()
  drm/amd/display: Don't load DMCU for Raven 1 (v2)

Pull networking fixes from David Miller:

 1) Fix OOPS during nf_tables rule dump, from Florian Westphal.

 2) Use after free in ip_vs_in, from Yue Haibing.

 3) Fix various kTLS bugs (NULL deref during device removal resync,
    netdev notification ignoring, etc.) From Jakub Kicinski.

 4) Fix ipv6 redirects with VRF, from David Ahern.

 5) Memory leak fix in igmpv3_del_delrec(), from Eric Dumazet.

 6) Missing memory allocation failure check in ip6_ra_control(), from
    Gen Zhang. And likewise fix ip_ra_control().

 7) TX clean budget logic error in aquantia, from Igor Russkikh.

 8) SKB leak in llc_build_and_send_ui_pkt(), from Eric Dumazet.

 9) Double frees in mlx5, from Parav Pandit.

10) Fix lost MAC address in r8169 during PCI D3, from Heiner Kallweit.

11) Fix botched register access in mvpp2, from Antoine Tenart.

12) Use after free in napi_gro_frags(), from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (89 commits)
  net: correct zerocopy refcnt with udp MSG_MORE
  ethtool: Check for vlan etype or vlan tci when parsing flow_rule
  net: don't clear sock->sk early to avoid trouble in strparser
  net-gro: fix use-after-free read in napi_gro_frags()
  net: dsa: tag_8021q: Create a stable binary format
  net: dsa: tag_8021q: Change order of rx_vid setup
  net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value
  ipv4: tcp_input: fix stack out of bounds when parsing TCP options.
  mlxsw: spectrum: Prevent force of 56G
  mlxsw: spectrum_acl: Avoid warning after identical rules insertion
  net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT
  r8169: fix MAC address being lost in PCI D3
  net: core: support XDP generic on stacked devices.
  netvsc: unshare skb in VF rx handler
  udp: Avoid post-GRO UDP checksum recalculation
  net: phy: dp83867: Set up RGMII TX delay
  net: phy: dp83867: do not call config_init twice
  net: phy: dp83867: increase SGMII autoneg timer duration
  net: phy: dp83867: fix speed 10 in sgmii mode
  net: phy: marvell10g: report if the PHY fails to boot firmware
  ...

Pull arm64 fixes from Will Deacon:
 "The fixes are still trickling in for arm64, but the only really
  significant one here is actually fixing a regression in the botched
  module relocation range checking merged for -rc2.

  Hopefully we've nailed it this time.

   - Fix implementation of our set_personality() system call, which
     wasn't being wrapped properly

   - Fix system call function types to keep CFI happy

   - Fix siginfo layout when delivering SIGKILL after a kernel fault

   - Really fix module relocation range checking"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: use the correct function type for __arm64_sys_ni_syscall
  arm64: use the correct function type in SYSCALL_DEFINE0
  arm64: fix syscall_fn_t type
  signal/arm64: Use force_sig not force_sig_fault for SIGKILL
  arm64/module: revert to unsigned interpretation of ABS16/32 relocations
  arm64: Fix the arm64_personality() syscall wrapper redirection

Pull btrfs fixes from David Sterba:
 "A few more fixes for bugs reported by users, fuzzing tools and
  regressions:

   - fix crashes in relocation:
       + resuming interrupted balance operation does not properly clean
         up orphan trees
       + with enabled qgroups, resuming needs to be more careful about
         block groups due to limited context when updating qgroups

   - fsync and logging fixes found by fuzzing

   - incremental send fixes for no-holes and clone

   - fix spin lock type used in timer function for zstd"

* tag 'for-5.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix race updating log root item during fsync
  Btrfs: fix wrong ctime and mtime of a directory after log replay
  Btrfs: fix fsync not persisting changed attributes of a directory
  btrfs: qgroup: Check bg while resuming relocation to avoid NULL pointer dereference
  btrfs: reloc: Also queue orphan reloc tree for cleanup to avoid BUG_ON()
  Btrfs: incremental send, fix emission of invalid clone operations
  Btrfs: incremental send, fix file corruption when no-holes feature is enabled
  btrfs: correct zstd workspace manager lock to use spin_lock_bh()
  btrfs: Ensure replaced device doesn't have pending chunk allocation

Pull configs fix from Christoph Hellwig:

 - fix a use after free in configfs_d_iput (Sahitya Tummala)

* tag 'configfs-for-5.2-2' of git://git.infradead.org/users/hch/configfs:
  configfs: Fix use-after-free when accessing sd->s_dentry

Pull sound fixes from Takashi Iwai:
 "No big surprises here, just a few device-specific fixes.

  HD-audio received several fixes for Acer, Dell, Huawei and other
  laptops as well as the workaround for the new Intel chipset. One
  significant one-liner fix is the disablement of the node-power saving
  on Realtek codecs, which may potentially cover annoying bugs like the
  background noises or click noises on many devices.

  Other than that, a fix for FireWire bit definitions, and another fix
  for LINE6 USB audio bug that was discovered by syzkaller"

* tag 'sound-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: fireface: Use ULL suffixes for 64-bit constants
  ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops
  ALSA: line6: Assure canceling delayed work at disconnection
  ALSA: hda - Force polling mode on CNL for fixing codec communication
  ALSA: hda/realtek - Enable micmute LED for Huawei laptops
  ALSA: hda/realtek - Set default power save node to 0
  ALSA: hda/realtek - Check headset type by unplug and resume

Pull clk driver fixes from Stephen Boyd:

 - Don't expose the SiFive clk driver on non-RISCV architectures

 - Fix some bits describing clks in the imx8mm driver

 - Always call clk domain code in the TI driver so non-legacy platforms
   work

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: ti: clkctrl: Fix clkdm_clk handling
  clk: imx: imx8mm: fix int pll clk gate
  clk: sifive: restrict Kconfig scope for the FU540 PRCI driver

drm/imx: ipuv3-plane: fix frame rate regression on non-plus i.MX6Q

Fix a regression introduced by 70e8a0c7 ("drm/imx: ipuv3-plane: add
function to query atomic update status") that halves the frame rate on
non-plus i.MX6Q, because the pending check always returns "pending"
even if an update is actually applied.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1559128738.3651.4.camel@pengutronix.de

TCP zerocopy takes a uarg reference for every skb, plus one for the
tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero
as it builds, sends and frees skbs inside its inner loop.

UDP and RAW zerocopy do not send inside the inner loop so do not need
the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit
52900d22288ed ("udp: elide zerocopy operation in hot path") introduced
extra_uref to pass the initial reference taken in sock_zerocopy_alloc
to the first generated skb.

But, sock_zerocopy_realloc takes this extra reference at the start of
every call. With MSG_MORE, no new skb may be generated to attach the
extra_uref to, so refcnt is incorrectly 2 with only one skb.

Do not take the extra ref if uarg && !tcp, which implies MSG_MORE.
Update extra_uref accordingly.

This conditional assignment triggers a false positive may be used
uninitialized warning, so have to initialize extra_uref at define.

Changes v1->v2: fix typo in Fixes SHA1

Fixes: 52900d22 ("udp: elide zerocopy operation in hot path")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When parsing an ethtool flow spec to build a flow_rule, the code checks
if both the vlan etype and the vlan tci are specified by the user to add
a FLOW_DISSECTOR_KEY_VLAN match.

However, when the user only specified a vlan etype or a vlan tci, this
check silently ignores these parameters.

For example, the following rule :

ethtool -N eth0 flow-type udp4 vlan 0x0010 action -1 loc 0

will result in no error being issued, but the equivalent rule will be
created and passed to the NIC driver :

ethtool -N eth0 flow-type udp4 action -1 loc 0

In the end, neither the NIC driver using the rule nor the end user have
a way to know that these keys were dropped along the way, or that
incorrect parameters were entered.

This kind of check should be left to either the driver, or the ethtool
flow spec layer.

This commit makes so that ethtool parameters are forwarded as-is to the
NIC driver.

Since none of the users of ethtool_rx_flow_rule_create are using the
VLAN dissector, I don't think this qualifies as a regression.

Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Pablo Neira Ayuso <pablo@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_inet sets sock->sk to NULL which trips strparser over:

BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.2.0-rc1-00139-g14629453a6d3 #21
RIP: 0010:tcp_peek_len+0x10/0x60
RSP: 0018:ffffc02e41c54b98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9cf924c4e030 RCX: 0000000000000051
RDX: 0000000000000000 RSI: 000000000000000c RDI: ffff9cf97128f480
RBP: ffff9cf9365e0300 R08: ffff9cf94fe7d2c0 R09: 0000000000000000
R10: 000000000000036b R11: ffff9cf939735e00 R12: ffff9cf91ad9ae40
R13: ffff9cf924c4e000 R14: ffff9cf9a8fcbaae R15: 0000000000000020
FS: 0000000000000000(0000) GS:ffff9cf9af7c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 000000013920a003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
 <IRQ>
 strp_data_ready+0x48/0x90
 tls_data_ready+0x22/0xd0 [tls]
 tcp_rcv_established+0x569/0x620
 tcp_v4_do_rcv+0x127/0x1e0
 tcp_v4_rcv+0xad7/0xbf0
 ip_protocol_deliver_rcu+0x2c/0x1c0
 ip_local_deliver_finish+0x41/0x50
 ip_local_deliver+0x6b/0xe0
 ? ip_protocol_deliver_rcu+0x1c0/0x1c0
 ip_rcv+0x52/0xd0
 ? ip_rcv_finish_core.isra.20+0x380/0x380
 __netif_receive_skb_one_core+0x7e/0x90
 netif_receive_skb_internal+0x42/0xf0
 napi_gro_receive+0xed/0x150
 nfp_net_poll+0x7a2/0xd30 [nfp]
 ? kmem_cache_free_bulk+0x286/0x310
 net_rx_action+0x149/0x3b0
 __do_softirq+0xe3/0x30a
 ? handle_irq_event_percpu+0x6a/0x80
 irq_exit+0xe8/0xf0
 do_IRQ+0x85/0xd0
 common_interrupt+0xf/0xf
 </IRQ>
RIP: 0010:cpuidle_enter_state+0xbc/0x450

To avoid this issue set sock->sk after sk_prot->close.
My grepping and testing did not discover any code which
would depend on the current behaviour.

Fixes: c46234eb ("tls: RX path for ktls")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a network driver provides to napi_gro_frags() an
skb with a page fragment of exactly 14 bytes, the call
to gro_pull_from_frag0() will 'consume' the fragment
by calling skb_frag_unref(skb, 0), and the page might
be freed and reused.

Reading eth->h_proto at the end of napi_frags_skb() might
read mangled data, or crash under specific debugging features.

BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline]
BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
Read of size 2 at addr ffff88809366840c by task syz-executor599/8957

CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142
 napi_frags_skb net/core/dev.c:5833 [inline]
 napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
 tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
 call_write_iter include/linux/fs.h:1872 [inline]
 do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693
 do_iter_write fs/read_write.c:970 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:951
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
 do_writev+0x15b/0x330 fs/read_write.c:1058

Fixes: a50e233c ("net-gro: restore frag0 optimization")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Fixes for DSA tagging using 802.1Q

During the prototyping for the "Decoupling PHYLINK from struct
net_device" patchset, the CPU port of the sja1105 driver was moved to a
different spot.  This uncovered an issue in the tag_8021q DSA code,
which used to work by mistake - the CPU port was the last hardware port
numerically, and this was masking an ordering issue which is very likely
to be seen in other drivers that make use of 802.1Q tags.

A question was also raised whether the VID numbers bear any meaning, and
the conclusion was that they don't, at least not in an absolute sense.
The second patch defines bit fields inside the DSA 802.1Q VID so that
tcpdump can decode it unambiguously (although the meaning is now clear
even by visual inspection).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tools like tcpdump need to be able to decode the significance of fake
VLAN headers that DSA uses to separate switch ports.

But currently these have no global significance - they are simply an
ordered list of DSA_MAX_SWITCHES x DSA_MAX_PORTS numbers ending at 4095.

The reason why this is submitted as a fix is that the existing mapping
of VIDs should not enter into a stable kernel, so we can pretend that
only the new format exists. This way tcpdump won't need to try to make
something out of the VLAN tags on 5.2 kernels.

Fixes: f9bbe447 ("net: dsa: Optional VLAN-based port separation for switches without tagging")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 802.1Q tagging performs an unbalanced setup in terms of RX VIDs on
the CPU port. For the ingress path of a 802.1Q switch to work, the RX
VID of a port needs to be seen as tagged egress on the CPU port.

While configuring the other front-panel ports to be part of this VID,
for bridge scenarios, the untagged flag is applied even on the CPU port
in dsa_switch_vlan_add.  This happens because DSA applies the same flags
on the CPU port as on the (bridge-controlled) slave ports, and the
effect in this case is that the CPU port tagged settings get deleted.

Instead of fixing DSA by introducing a way to control VLAN flags on the
CPU port (and hence stop inheriting from the slave ports) - a hard,
perhaps intractable problem - avoid this situation by moving the setup
part of the RX VID on the CPU port after all the other front-panel ports
have been added to the VID.

Fixes: f9bbe447 ("net: dsa: Optional VLAN-based port separation for switches without tagging")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but
the current code is passing the global tx queue offset, so it ends
up writing to unknown registers (between 0x8280 and 0x82fc, which
seemed to be unused by the hardware). This fixes the issue by using
the logical queue id instead.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCP option parsing routines in tcp_parse_options function could
read one byte out of the buffer of the TCP options.

1         while (length > 0) {
2                 int opcode = *ptr++;
3                 int opsize;
4
5                 switch (opcode) {
6                 case TCPOPT_EOL:
7                         return;
8                 case TCPOPT_NOP:        /* Ref: RFC 793 section 3.1 */
9                         length--;
10                        continue;
11                default:
12                        opsize = *ptr++; //out of bound access

If length = 1, then there is an access in line2.
And another access is occurred in line 12.
This would lead to out-of-bound access.

Therefore, in the patch we check that the available data length is
larger enough to pase both TCP option code and size.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Two small fixes

Patch #1 from Jiri fixes an issue specific to Spectrum-2 where the
insertion of two identical flower filters with different priorities
would trigger a warning.

Patch #2 from Amit prevents the driver from trying to configure a port
with a speed of 56Gb/s and autoneg off as this is not supported and
results in error messages from firmware.

Please consider patch #1 for stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When identical rules are inserted, the latter one goes to C-TCAM. For
that, a second eRP with the same mask is created. These 2 eRPs by the
nature cannot be merged and also one cannot be parent of another.
Teach mlxsw_sp_acl_erp_delta_fill() about this possibility and handle it
gracefully.
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Fixes: c22291f7 ("mlxsw: spectrum: acl: Implement delta for ERP")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the upper half of a 4-byte STATS_TYPE_PORT statistic ends
up in bits 47:32 of the return value, instead of bits 31:16 as they
should.

Fixes: 6e46e2d8 ("net: dsa: mv88e6xxx: Fix u64 statistics")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

(At least) RTL8168e forgets its MAC address in PCI D3. To fix this set
the MAC address when resuming. For resuming from runtime-suspend we
had this in place already, for resuming from S3/S5 it was missing.

The commit referenced as being fixed isn't wrong, it's just the first
one where the patch applies cleanly.

Fixes: 0f07bd85 ("r8169: use dev_get_drvdata where possible")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Albert Astals Cid <aacid@kde.org>
Tested-by: Albert Astals Cid <aacid@kde.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-05-28

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.13:
('net/mlx5: Allocate root ns memory using kzalloc to match kfree')

For -stable v4.16:
('net/mlx5: Avoid double free in fs init error unwinding path')

For -stable v4.18:
('net/mlx5e: Disable rxhash when CQE compress is enabled')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

      GPL-2.0
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  subject to the gnu public license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171440.319650492@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  subject to the gnu public license v2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171440.222651153@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  subject to the gnu public license v 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171440.130801526@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  license gplv2 this program is free software you can redistribute it
  and or modify it under the terms and conditions of the gnu general
  public license version 2 as published by the free software
  foundation this program is distributed in the hope it will be useful
  but without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with this program if
  not write to the free software foundation inc 51 franklin st fifth
  floor boston ma 02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171440.038486796@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171439.945432253@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  distributed under the gnu gpl license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171439.854676954@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  you may use this code as per gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 5 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171439.762454146@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  distributed under the terms of the gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171439.671734884@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  this file distributed under the gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171439.580924717@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  this code is licenced under the gpl version 2 as described in the
  copying file that acompanies the linux kernel

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171439.466585205@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  subject to the gpl v 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171439.372657724@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>