- 28 Feb, 2024 2 commits
-
-
Florian Westphal authored
conntrack nf_confirm logic cannot handle cloned skbs referencing the same nf_conn entry, which will happen for multicast (broadcast) frames on bridges. Example: macvlan0 | br0 / \ ethX ethY ethX (or Y) receives a L2 multicast or broadcast packet containing an IP packet, flow is not yet in conntrack table. 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting. -> skb->_nfct now references a unconfirmed entry 2. skb is broad/mcast packet. bridge now passes clones out on each bridge interface. 3. skb gets passed up the stack. 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb and schedules a work queue to send them out on the lower devices. The clone skb->_nfct is not a copy, it is the same entry as the original skb. The macvlan rx handler then returns RX_HANDLER_PASS. 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb. The Macvlan broadcast worker and normal confirm path will race. This race will not happen if step 2 already confirmed a clone. In that case later steps perform skb_clone() with skb->_nfct already confirmed (in hash table). This works fine. But such confirmation won't happen when eb/ip/nftables rules dropped the packets before they reached the nf_confirm step in postrouting. Pablo points out that nf_conntrack_bridge doesn't allow use of stateful nat, so we can safely discard the nf_conn entry and let inet call conntrack again. This doesn't work for bridge netfilter: skb could have a nat transformation. Also bridge nf prevents re-invocation of inet prerouting via 'sabotage_in' hook. Work around this problem by explicit confirmation of the entry at LOCAL_IN time, before upper layer has a chance to clone the unconfirmed entry. The downside is that this disables NAT and conntrack helpers. Alternative fix would be to add locking to all code parts that deal with unconfirmed packets, but even if that could be done in a sane way this opens up other problems, for example: -m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4 -m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5 For multicast case, only one of such conflicting mappings will be created, conntrack only handles 1:1 NAT mappings. Users should set create a setup that explicitly marks such traffic NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass them, ruleset might have accept rules for untracked traffic already, so user-visible behaviour would change. Suggested-by:Pablo Neira Ayuso <pablo@netfilter.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Ignat Korchagin authored
Commit d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") added some validation of NFPROTO_* families in the nft_compat module, but it broke the ability to use legacy iptables modules in dual-stack nftables. While with legacy iptables one had to independently manage IPv4 and IPv6 tables, with nftables it is possible to have dual-stack tables sharing the rules. Moreover, it was possible to use rules based on legacy iptables match/target modules in dual-stack nftables. As an example, the program from [2] creates an INET dual-stack family table using an xt_bpf based rule, which looks like the following (the actual output was generated with a patched nft tool as the current nft tool does not parse dual stack tables with legacy match rules, so consider it for illustrative purposes only): table inet testfw { chain input { type filter hook prerouting priority filter; policy accept; bytecode counter packets 0 bytes 0 accept } } After d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") we get EOPNOTSUPP for the above program. Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also restrict the functions to classic iptables hooks. Changes in v3: * clarify that upstream nft will not display such configuration properly and that the output was generated with a patched nft tool * remove example program from commit description and link to it instead * no code changes otherwise Changes in v2: * restrict nft_(match/target)_validate() to classic iptables hooks * rewrite example program to use unmodified libnftnl Fixes: d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72 [1] Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/ [2] Reported-by:
Jordan Griege <jgriege@cloudflare.com> Signed-off-by:
Ignat Korchagin <ignat@cloudflare.com> Signed-off-by:
-
- 22 Feb, 2024 17 commits
-
-
Tom Parkin authored
l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent. Fixes: 9d4c7580 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()") Cc: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:Tom Parkin <tparkin@katalix.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) If user requests to wake up a table and hook fails, restore the dormant flag from the error path, from Florian Westphal. 2) Reset dst after transferring it to the flow object, otherwise dst gets released twice from the error path. 3) Release dst in case the flowtable selects a direct xmit path, eg. transmission to bridge port. Otherwise, dst is memleaked. 4) Register basechain and flowtable hooks at the end of the command. Error path releases these datastructure without waiting for the rcu grace period. 5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report on access to hook type, also from Florian Westphal. netfilter pull request 24-02-22 * tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: use kzalloc for hook allocation netfilter: nf_tables: register hooks last when adding new chain/flowtable netfilter: nft_flow_offload: release dst in case direct xmit path is used netfilter: nft_flow_offload: reset dst in route object after setting up flow netfilter: nf_tables: set dormant flag on hook register failure ==================== Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-02-22 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 24 day(s) which contain a total of 15 files changed, 217 insertions(+), 17 deletions(-). The main changes are: 1) Fix a syzkaller-triggered oops when attempting to read the vsyscall page through bpf_probe_read_kernel and friends, from Hou Tao. 2) Fix a kernel panic due to uninitialized iter position pointer in bpf_iter_task, from Yafang Shao. 3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel, from Martin KaFai Lau. 4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET) due to incorrect truesize accounting, from Sebastian Andrzej Siewior. 5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready, from Shigeru Yoshida. 6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be resolved, from Hari Bathini. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready() selftests/bpf: Add negtive test cases for task iter bpf: Fix an issue due to uninitialized bpf_iter_task selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel selftest/bpf: Test the read of vsyscall page under x86-64 x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault() x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h bpf, scripts: Correct GPL license name xsk: Add truesize to skb_add_rx_frag(). bpf: Fix warning for bpf_cpumask in verifier ==================== Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.netSigned-off-by:
-
Siddharth Vadapalli authored
Commit bb726b75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY. While that commit indicated that the RTL8211F_PHYCR2 register is not supported by the "VD-CG" PHY model and therefore updated the corresponding section in rtl8211f_config_init() to be invoked conditionally, the call to "genphy_soft_reset()" was left as-is, when it should have also been invoked conditionally. This is because the call to "genphy_soft_reset()" was first introduced by the commit 0a4355c2 ("net: phy: realtek: add dt property to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY reset should be issued after setting bits in the PHYCR2 register. As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the rtl8211f_config_init() function by invoking "genphy_soft_reset()" conditionally based on the presence of the "PHYCR2" register. Fixes: bb726b75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by:
-
Paolo Abeni authored
Justin Iurman says: ==================== ioam6: fix write to cloned skb's Make sure the IOAM data insertion is not applied on cloned skb's. As a consequence, ioam selftests needed a refactoring. ==================== Link: https://lore.kernel.org/r/20240219135255.15429-1-justin.iurman@uliege.beSigned-off-by:
-
Justin Iurman authored
ioam6_parser uses a packet socket. After the fix to prevent writing to cloned skb's, the receiver does not see its IOAM data anymore, which makes input/forward ioam-selftests to fail. As a workaround, ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to get hop-by-hop options. As a consequence, the hook is "after" the IOAM data insertion by the receiver and all tests are working again. Signed-off-by:
Justin Iurman <justin.iurman@uliege.be> Signed-off-by:
-
Justin Iurman authored
ioam6_fill_trace_data() writes inside the skb payload without ensuring it's writeable (e.g., not cloned). This function is called both from the input and output path. The output path (ioam6_iptunnel) already does the check. This commit provides a fix for the input path, inside ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network header pointer ("nh") when returning from ipv6_hop_ioam(). Fixes: 9ee11f0f ("ipv6: ioam: Data plane support for Pre-allocated Trace") Reported-by: -
Rémi Denis-Courmont authored
The receive queues are protected by their respective spin-lock, not the socket lock. This could lead to skb_peek() unexpectedly returning NULL or a pointer to an already dequeued socket buffer. Fixes: 9641458d ("Phonet: Pipe End Point for Phonet Pipes protocol") Signed-off-by:
Rémi Denis-Courmont <courmisch@gmail.com> Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.netSigned-off-by:
-
Rémi Denis-Courmont authored
The receive queue is protected by its embedded spin-lock, not the socket lock, so we need the former lock here (and only that one). Fixes: 107d0d9b ("Phonet: Phonet datagram transport protocol") Reported-by:
Luosili <rootlab@huawei.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.netSigned-off-by:
-
Horatiu Vultur authored
Both registers used when doing manual injection or fdma injection are shared between all the net devices of the switch. It was noticed that when having two process which each of them trying to inject frames on different ethernet ports, that the HW started to behave strange, by sending out more frames then expected. When doing fdma injection it is required to set the frame in the DCB and then make sure that the next pointer of the last DCB is invalid. But because there is no locks for this, then easily this pointer between the DCB can be broken and then it would create a loop of DCBs. And that means that the HW will continuously transmit these frames in a loop. Until the SW will break this loop. Therefore to fix this issue, add a spin lock for when accessing the registers for manual or fdma injection. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Daniel Machon <daniel.machon@microchip.com> Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support") Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jianbo Liu authored
As IDR can't protect itself from the concurrent modification, place idr_remove() under the protection of tp->lock. Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by:
Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240220085928.9161-1-jianbol@nvidia.comSigned-off-by:
-
Jiri Pirko authored
Unlike other commands, due to a c&p error, port dump fills-up cmd with wrong value, different from port-get request cmd, port-get doit reply and port notification. Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW. Skimmed through devlink userspace implementations, none of them cares about this cmd value. Only ynl, for which, this is actually a fix, as it expects doit and dumpit ops rsp_value to be the same. Omit the fixes tag, even thought this is fix, better to target this for next release. Fixes: bfcd3a46 ("Introduce devlink infrastructure") Signed-off-by:
-
Kurt Kanzenbach authored
Fix EST offset for dwmac 5.10. Currently configuring Qbv doesn't work as expected. The schedule is configured, but never confirmed: |[ 128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST The reason seems to be the refactoring of the EST code which set the wrong EST offset for the dwmac 5.10. After fixing this it works as before: |[ 106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST |[ 128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched Tested on imx93. Fixes: c3f3b972 ("net: stmmac: Refactor EST implementation") Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20240220-stmmac_est-v1-1-c41f9ae2e7b7@linutronix.deSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tools: ynl: fix impossible errors Fix bugs discovered while I was hacking in low level stuff in YNL and kept breaking the socket, exercising the "impossible" error paths. v1: https://lore.kernel.org/all/20240217001742.2466993-1-kuba@kernel.org/ ==================== Link: https://lore.kernel.org/r/20240220161112.2735195-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Make sure to free the already-parsed mcast_groups if we don't get an ack from the kernel when reading family info. This is part of the ynl_sock_create() error path, so we won't get a call to ynl_sock_destroy() to free them later. Fixes: 86878f14 ("tools: ynl: user space helpers") Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20240220161112.2735195-3-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
There is one common error handler in ynl - ynl_cb_error(). It expects priv to be a pointer to struct ynl_parse_arg AKA yarg. To avoid potential crashes if we encounter a stray NLMSG_ERROR always pass yarg as priv (or a struct which has it as the first member). ynl_cb_null() has a similar problem directly - it expects yarg but priv passed by the caller is ys. Found by code inspection. Fixes: 86878f14 ("tools: ynl: user space helpers") Acked-by:
-
Jeremy Kerr authored
We may hold an extra reference on a socket if a tag allocation fails: we optimistically allocate the sk_key, and take a ref there, but do not drop if we end up not using the allocated key. Ensure we're dropping the sock on this failure by doing a proper unref rather than directly kfree()ing. Fixes: de8a6b15 ("net: mctp: add an explicit reference from a mctp_sk_key to sock") Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by:
-
- 21 Feb, 2024 18 commits
-
-
Florian Westphal authored
KMSAN reports unitialized variable when registering the hook, reg->hook_ops_type == NF_HOOK_OP_BPF) ~~~~~~~~~~~ undefined This is a small structure, just use kzalloc to make sure this won't happen again when new fields get added to nf_hook_ops. Fixes: 7b4b2fa3 ("netfilter: annotate nf_tables base hook ops") Signed-off-by: -
Pablo Neira Ayuso authored
Register hooks last when adding chain/flowtable to ensure that packets do not walk over datastructure that is being released in the error path without waiting for the rcu grace period. Fixes: 91c7b38d ("netfilter: nf_tables: use new transaction infrastructure to handle chain") Fixes: 3b49e2e9 ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by:
-
Pablo Neira Ayuso authored
Direct xmit does not use it since it calls dev_queue_xmit() to send packets, hence it calls dst_release(). kmemleak reports: unreferenced object 0xffff88814f440900 (size 184): comm "softirq", pid 0, jiffies 4294951896 hex dump (first 32 bytes): 00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff .`[............. 21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00 !.P............. backtrace (crc cb2bf5d6): [<000000003ee17107>] kmem_cache_alloc+0x286/0x340 [<0000000021a5de2c>] dst_alloc+0x43/0xb0 [<00000000f0671159>] rt_dst_alloc+0x2e/0x190 [<00000000fe5092c9>] __mkroute_output+0x244/0x980 [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160 [<0000000045367433>] nf_ip_route+0xf/0x30 [<0000000085da1d8e>] nf_route+0x2d/0x60 [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload] [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload] [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables] [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables] [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables] [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160 [<0000000005eccab1>] ip_forward+0x8b6/0x9b0 [<00000000553a269b>] ip_rcv+0x221/0x230 [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110 Fixes: fa502c86 ("netfilter: flowtable: simplify route logic") Reported-by: -
Pablo Neira Ayuso authored
dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow. Fixes: a3c90f7a ("netfilter: nf_tables: flow offload expression") Signed-off-by:
-
Florian Westphal authored
We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core. Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com Fixes: 179d9ba5 ("netfilter: nf_tables: fix table flag updates") Signed-off-by:
-
Jakub Kicinski authored
Sabrina Dubroca says: ==================== tls: fixes for record type handling with PEEK There are multiple bugs in tls_sw_recvmsg's handling of record types when MSG_PEEK flag is used, which can lead to incorrectly merging two records: - consecutive non-DATA records shouldn't be merged, even if they're the same type (partly handled by the test at the end of the main loop) - records of the same type (even DATA) shouldn't be merged if one record of a different type comes in between ==================== Link: https://lore.kernel.org/r/cover.1708007371.git.sd@queasysnail.netSigned-off-by:
-
Sabrina Dubroca authored
If we queue 3 records: - record 1, type DATA - record 2, some other type - record 3, type DATA the current code can look past the 2nd record and merge the 2 data records. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/4623550f8617c239581030c13402d3262f2bd14f.1708007371.git.sd@queasysnail.netSigned-off-by:
-
Sabrina Dubroca authored
Two consecutive control messages of the same type should never be merged into one large received blob of data. Signed-off-by:
-
Sabrina Dubroca authored
If we queue 3 records: - record 1, type DATA - record 2, some other type - record 3, type DATA and do a recv(PEEK), the rx_list will contain the first two records. The next large recv will walk through the rx_list and copy data from record 1, then stop because record 2 is a different type. Since we haven't filled up our buffer, we will process the next available record. It's also DATA, so we can merge it with the current read. We shouldn't do that, since there was a record in between that we ignored. Add a flag to let process_rx_list inform tls_sw_recvmsg that it had more data available. Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by:
-
Sabrina Dubroca authored
If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work. Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by:
-
Sabrina Dubroca authored
PEEK needs to leave decrypted records on the rx_list so that we can receive them later on, so it jumps back into the async code that queues the skb. Unfortunately that makes us skip the TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two records of the same (non-DATA) type are queued, we end up merging them. Add the same record type check, and make it unlikely to not penalize the async fastpath. Async decrypt only applies to data record, so this check is only needed for PEEK. process_rx_list also has similar issues. Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by:
-
Vasiliy Kovalev authored
The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0 Cc: stable@vger.kernel.org Signed-off-by:Vasiliy Kovalev <kovalev@altlinux.org> Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Link: https://lore.kernel.org/r/20240214162733.34214-1-kovalev@altlinux.orgSigned-off-by:
-
Shigeru Yoshida authored
syzbot reported the following NULL pointer dereference issue [1]: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:0x0 [...] Call Trace: <TASK> sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230 unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called concurrently, psock->saved_data_ready can be NULL, causing the above issue. This patch fixes this issue by calling the appropriate data ready function using the sk_psock_data_ready() helper and protecting it from concurrency with sk->sk_callback_lock. Fixes: 6df7f764 ("bpf, sockmap: Wake up polling after data copy") Reported-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com Acked-by:
John Fastabend <john.fastabend@gmail.com> Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1] Link: https://lore.kernel.org/bpf/20240218150933.6004-1-syoshida@redhat.com
-
Simon Horman authored
The cited commit [1] added framer support under drivers/net/wan, which is covered by NETWORKING [GENERAL]. And it is implied that framer-provider.h and framer.h, which were also added buy the same patch, are also maintained as part of NETWORKING [GENERAL]. Make this explicit by adding these files to the corresponding section in MAINTAINERS. [1] 82c944d0 ("net: wan: Add framer framework support") Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
syzbot reported another task hung in __unix_gc(). [0] The current while loop assumes that all of the left candidates have oob_skb and calling kfree_skb(oob_skb) releases the remaining candidates. However, I missed a case that oob_skb has self-referencing fd and another fd and the latter sk is placed before the former in the candidate list. Then, the while loop never proceeds, resulting the task hung. __unix_gc() has the same loop just before purging the collected skb, so we can call kfree_skb(oob_skb) there and let __skb_queue_purge() release all inflight sockets. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 2784 Comm: kworker/u4:8 Not tainted 6.8.0-rc4-syzkaller-01028-g71b605d3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Workqueue: events_unbound __unix_gc RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:200 Code: 89 fb e8 23 00 00 00 48 8b 3d 84 f5 1a 0c 48 89 de 5b e9 43 26 57 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0d 90 52 70 7e 65 8b 15 91 52 70 RSP: 0018:ffffc9000a17fa78 EFLAGS: 00000287 RAX: ffffffff8a0a6108 RBX: ffff88802b6c2640 RCX: ffff88802c0b3b80 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffc9000a17fbf0 R08: ffffffff89383f1d R09: 1ffff1100ee5ff84 R10: dffffc0000000000 R11: ffffed100ee5ff85 R12: 1ffff110056d84ee R13: ffffc9000a17fae0 R14: 0000000000000000 R15: ffffffff8f47b840 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffef5687ff8 CR3: 0000000029b34000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> __unix_gc+0xe69/0xf40 net/unix/garbage.c:343 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706 worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787 kthread+0x2ef/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 </TASK> Reported-and-tested-by: syzbot+ecab4d36f920c3574bf9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ecab4d36f920c3574bf9 Fixes: 25236c91 ("af_unix: Fix task hung while purging oob_skb in GC.") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Alex Elder authored
In newer hardware, IPA supports more than 32 endpoints. Some registers--such as IPA interrupt registers--represent endpoints as bits in a 4-byte register, and such registers are repeated as needed to represent endpoints beyond the first 32. In ipa_interrupt_suspend_clear_all(), we clear all pending IPA suspend interrupts by reading all status register(s) and writing corresponding registers to clear interrupt conditions. Unfortunately the number of registers to read/write is calculated incorrectly, and as a result we access *many* more registers than intended. This bug occurs only when the IPA hardware signals a SUSPEND interrupt, which happens when a packet is received for an endpoint (or its underlying GSI channel) that is suspended. This situation is difficult to reproduce, but possible. Fix this by correctly computing the number of interrupt registers to read and write. This is the only place in the code where registers that map endpoints or channels this way perform this calculation. Fixes: f298ba78 ("net: ipa: add a parameter to suspend registers") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Eric Dumazet authored
syzbot reported a lockdep violation [1] involving af_unix support of SO_PEEK_OFF. Since SO_PEEK_OFF is inherently not thread safe (it uses a per-socket sk_peek_off field), there is really no point to enforce a pointless thread safety in the kernel. After this patch : - setsockopt(SO_PEEK_OFF) no longer acquires the socket lock. - skb_consume_udp() no longer has to acquire the socket lock. - af_unix no longer needs a special version of sk_set_peek_off(), because it does not lock u->iolock anymore. As a followup, we could replace prot->set_peek_off to be a boolean and avoid an indirect call, since we always use sk_set_peek_off(). [1] WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00267-g0f1dd5e9 #0 Not tainted syz-executor.2/30025 is trying to acquire lock: ffff8880765e7d80 (&u->iolock){+.+.}-{3:3}, at: unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 but task is already holding lock: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_UNIX){+.+.}-{0:0}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_nested+0x48/0x100 net/core/sock.c:3524 lock_sock include/net/sock.h:1691 [inline] __unix_dgram_recvmsg+0x1275/0x12c0 net/unix/af_unix.c:2415 sock_recvmsg_nosec+0x18e/0x1d0 net/socket.c:1046 ____sys_recvmsg+0x3c0/0x470 net/socket.c:2801 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 -> #0 (&u->iolock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_UNIX); lock(&u->iolock); lock(sk_lock-AF_UNIX); lock(&u->iolock); *** DEADLOCK *** 1 lock held by syz-executor.2/30025: #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 stack backtrace: CPU: 0 PID: 30025 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00267-g0f1dd5e9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f78a1c7dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f78a0fde0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007f78a1dac050 RCX: 00007f78a1c7dda9 RDX: 000000000000002a RSI: 0000000000000001 RDI: 0000000000000006 RBP: 00007f78a1cca47a R08: 0000000000000004 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f78a1dac050 R15: 00007ffe5cd81ae8 Fixes: 859051dd ("bpf: Implement cgroup sockaddr hooks for unix sockets") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Subbaraya Sundeep authored
AF reserves MCAM entries for each PF, VF present in the system and populates the entry with DMAC and action with default RSS so that basic packet I/O works. Since PF/VF is not aware of the RSS action installed by AF, AF only fixup the actions of the rules installed by PF/VF with corresponding default RSS action. This worked well for rules installed by PF/VF for features like RX VLAN offload and DMAC filters but rules involving action like drop/forward to queue are also getting modified by AF. Hence fix it by setting the default RSS action only if requested by PF/VF. Fixes: 967db352 ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
- 20 Feb, 2024 3 commits
-
-
Jakub Kicinski authored
Netronome graciously transferred the original NIPA repo to our new netdev umbrella org. Link to that instead of my private fork. Signed-off-by:
-
Kuniyuki Iwashima authored
syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6d ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by:
syzkaller <syzkaller@googlegroups.com> Reported-by:
Bjoern Doebel <doebel@amazon.de> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Vasiliy Kovalev authored
The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Make an unregister in case of unsuccessful registration. Fixes: 687125b5 ("devlink: split out core code") Signed-off-by:
-
