Merge tag 'linux-can-fixes-for-5.2-20190607' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-06-07

this is a pull reqeust of 9 patches for net/master.

The first patch is by Alexander Dahl and removes a duplicate menu entry from
the Kconfig. The next patch by Joakim Zhang fixes the timeout in the flexcan
driver when setting small bit rates. Anssi Hannula's patch for the xilinx_can
driver fixes the bittiming_const for CAN FD core. The two patches by Sean
Nyekjaer bring mcp25625 to the existing mcp251x driver. The patch by Eugen
Hristev implements an errata for the m_can driver. YueHaibing's patch fixes the
error handling ing can_init(). The patch by Fabio Estevam for the flexcan
driver removes an unneeded registration message during flexcan_probe(). And the
last patch is by Willem de Bruijn and adds the missing purging the  socket
error queue on sock destruct.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If you configure a route with multiple labels, e.g.
  ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4
A warning is logged:
  kernel: [  130.561819] netlink: 'ip': attribute type 1 has an invalid
  length.

This happens because mpls_iptunnel_policy has set the type of
MPLS_IPTUNNEL_DST to fixed size NLA_U32.
Change it to a minimum size.
nla_get_labels() does the remaining validation.

Fixes: e3e4712e ("mpls: ip tunnel support")
Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[Resent to net instead of net-next - may clash with Anders Roxell's patch
series addressing duplicate module names]

Commit 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver")
introduced a new PHY driver drivers/net/phy/asix.c that causes a module
name conflict with a pre-existiting driver (drivers/net/usb/asix.c).

The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded
by that driver via its PHY ID. A rename of the driver looks unproblematic.

Rename PHY driver to ax88796b.c in order to resolve name conflict.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before taking a refcount, make sure the object is not already
scheduled for deletion.

Same fix is needed in ipv6_flowlabel_opt()

Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix an uninitialized variable:

  CC      net/ipv4/fib_semantics.o
net/ipv4/fib_semantics.c: In function 'fib_check_nh_v4_gw':
net/ipv4/fib_semantics.c:1027:12: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
   if (!tbl || err) {
            ^~
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-06-07

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
   32-bits for alu32 ops, from Björn and Luke with selftests covering all
   relevant BPF alu ops from Björn and Jiong.

2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
   __udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
   that skb->data is pointing to transport header, from Martin.

3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
   workqueue, and a missing restore of sk_write_space when psock gets dropped,
   from Jakub and John.

4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
   breaks standard applications like DNS if reverse NAT is not performed upon
   receive, from Daniel.

5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
   fails to verify that the length of the tuple is long enough, from Lorenz.

6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
   {un,}successful probe) as that is expected to be propagated as an fd to
   load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
   from Michal.

7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.

8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

CAN supports software tx timestamps as of the below commit. Purge
any queued timestamp packets on socket destroy.

Fixes: 51f31cab ("ip: support for TX timestamps on UDP and RAW sockets")
Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Currently the following message is observed when the flexcan
driver is probed:

flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=23)

The reason for printing 'ptrval' is explained at
Documentation/core-api/printk-formats.rst:

"Pointers printed without a specifier extension (i.e unadorned %p) are
hashed to prevent leaking information about the kernel memory layout. This
has the added benefit of providing a unique identifier. On 64-bit machines
the first 32 bits are zeroed. The kernel will print ``(ptrval)`` until it
gathers enough entropy."

Instead of passing %pK, which can print the correct address, simply
remove the entire message as it is not really that useful.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch add error path for can_init() to avoid possible crash if some
error occurs.

Fixes: 0d66548a ("[CAN]: Add PF_CAN core module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During frame reception while the MCAN is in Error Passive state and the
Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen
that MCAN_IR.MRAF is set although there was no Message RAM access
failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is
generated.

Work around:
The Message RAM Access Failure interrupt routine needs to check whether

    MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'.

In this case, reset MCAN_IR.MRAF. No further action is required.
This affects versions older than 3.2.0

Errata explained on Sama5d2 SoC which includes this hardware block:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf
chapter 6.2

Reproducibility: If 2 devices with m_can are connected back to back,
configuring different bitrate on them will lead to interrupt storm on
the receiving side, with error "Message RAM access failure occurred".
Another way is to have a bad hardware connection. Bad wire connection
can lead to this issue as well.

This patch fixes the issue according to provided workaround.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch add the mcp25625 to the device tree bindings documentation.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Commit 9e5f1b27 ("can: xilinx_can: add support for Xilinx CAN FD
core") added a new can_bittiming_const structure for CAN FD cores that
support larger values for tseg1, tseg2, and sjw than previous Xilinx CAN
cores, but the commit did not actually take that into use.

Fix that.

Tested with CAN FD core on a ZynqMP board.

Fixes: 9e5f1b27 ("can: xilinx_can: add support for Xilinx CAN FD core")
Reported-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Current we can meet timeout issue when setting a small bitrate like
10000 as follows on i.MX6UL EVK board (ipg clock = 66MHZ, per clock =
30MHZ):

| root@imx6ul7d:~# ip link set can0 up type can bitrate 10000

A link change request failed with some changes committed already.
Interface can0 may have been left with an inconsistent configuration,
please check.

| RTNETLINK answers: Connection timed out

It is caused by calling of flexcan_chip_unfreeze() timeout.

Originally the code is using usleep_range(10, 20) for unfreeze
operation, but the patch (8badd65e can: flexcan: avoid calling
usleep_range from interrupt context) changed it into udelay(10) which is
only a half delay of before, there're also some other delay changes.

After double to FLEXCAN_TIMEOUT_US to 100 can fix the issue.

Meanwhile, Rasmus Villemoes reported that even with a timeout of 100,
flexcan_probe() fails on the MPC8309, which requires a value of at least
140 to work reliably. 250 works for everyone.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This seems to have slipped in by accident when sorting the entries.

Fixes: ffbdd917Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge tag 'wireless-drivers-for-davem-2019-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.2

First set of fixes for 5.2. Most important here are buffer overflow
fixes for mwifiex.

rtw88

* fix out of bounds compiler warning

* fix rssi handling to get 4x more throughput

* avoid circular locking

rsi

* fix unitilised data warning, these are hopefully the last ones so
  that the warning can be enabled by default

mwifiex

* fix buffer overflows

iwlwifi

* remove not used debugfs file

* various fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.

 2) Read SFP eeprom in max 16 byte increments to avoid problems with
    some SFP modules, from Russell King.

 3) Fix UDP socket lookup wrt. VRF, from Tim Beale.

 4) Handle route invalidation properly in s390 qeth driver, from Julian
    Wiedmann.

 5) Memory leak on unload in RDS, from Zhu Yanjun.

 6) sctp_process_init leak, from Neil HOrman.

 7) Fix fib_rules rule insertion semantic change that broke Android,
    from Hangbin Liu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  pktgen: do not sleep with the thread lock held.
  net: mvpp2: Use strscpy to handle stat strings
  net: rds: fix memory leak in rds_ib_flush_mr_pool
  ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
  ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
  Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
  net: aquantia: fix wol configuration not applied sometimes
  ethtool: fix potential userspace buffer overflow
  Fix memory leak in sctp_process_init
  net: rds: fix memory leak when unload rds_rdma
  ipv6: fix the check before getting the cookie in rt6_get_cookie
  ipv4: not do cache for local delivery if bc_forwarding is enabled
  s390/qeth: handle error when updating TX queue count
  s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
  s390/qeth: check dst entry before use
  s390/qeth: handle limited IPv4 broadcast in L3 TX path
  net: fix indirect calls helpers for ptype list hooks.
  net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
  udp: only choose unbound UDP socket for multicast when not in a VRF
  net/tls: replace the sleeping lock around RX resync with a bit lock
  ...

Pull rdma fixes from Jason Gunthorpe:
 "Things are looking pretty quiet here in RDMA, not too many bug fixes
  rolling in right now. The usual driver bug fixes and fixes for a
  couple of regressions introduced in 5.2:

   - Fix a race on bootup with RDMA device renaming and srp. SRP also
     needs to rename its internal sys files

   - Fix a memory leak in hns

   - Don't leak resources in efa on certain error unwinds

   - Don't panic in certain error unwinds in ib_register_device

   - Various small user visible bug fix patches for the hfi and efa
     drivers

   - Fix the 32 bit compilation break"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/efa: Remove MAYEXEC flag check from mmap flow
  mlx5: avoid 64-bit division
  IB/hfi1: Validate page aligned for a given virtual address
  IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
  IB/hfi1: Insure freeze_work work_struct is canceled on shutdown
  IB/rdmavt: Fix alloc_qpn() WARN_ON()
  RDMA/core: Fix panic when port_data isn't initialized
  RDMA/uverbs: Pass udata on uverbs error unwind
  RDMA/core: Clear out the udata before error unwind
  RDMA/hns: Fix PD memory leak for internal allocation
  RDMA/srp: Rename SRP sysfs name after IB device rename trigger

Pull arm64 fixes from Will Deacon:
 "Another round of mostly-benign fixes, the exception being a boot crash
  on SVE2-capable CPUs (although I don't know where you'd find such a
  thing, so maybe it's benign too).

  We're in the process of resolving some big-endian ptrace breakage, so
  I'll probably have some more for you next week.

  Summary:

   - Fix boot crash on platforms with SVE2 due to missing register
     encoding

   - Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y

   - Move cpu_logical_map into smp.h for use by upcoming irqchip drivers

   - Trivial typo fix in comment

   - Disable some useless, noisy warnings from GCC 9"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Silence gcc warnings about arch ABI drift
  ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix
  arm64: arch_timer: mark functions as __always_inline
  arm64: smp: Moved cpu_logical_map[] to smp.h
  arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()

Daniel Borkmann says:

====================
Please refer to the patch 1/6 as the main patch with the details
on the current sendmsg hook API limitations and proposal to fix
it in order to work with basic applications like DNS. Remaining
patches are the usual uapi and tooling updates as well as test
cases. Thanks a lot!

v2 -> v3:
  - Add attach types to test_section_names.c and libbpf (Andrey)
  - Added given Acks, rest as-is
v1 -> v2:
  - Split off uapi header sync and bpftool bits (Martin, Alexei)
  - Added missing bpftool doc and bash completion as well
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add cgroup/recvmsg{4,6} to test_section_names as well. Test run output:

  # ./test_section_names
  libbpf: failed to guess program type based on ELF section name 'InvAliD'
  libbpf: supported section(type) names are: [...]
  libbpf: failed to guess attach type based on ELF section name 'InvAliD'
  libbpf: attachable section(type) names are: [...]
  libbpf: failed to guess program type based on ELF section name 'cgroup'
  libbpf: supported section(type) names are: [...]
  libbpf: failed to guess attach type based on ELF section name 'cgroup'
  libbpf: attachable section(type) names are: [...]
  Summary: 38 PASSED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Extend test_sock_addr for recvmsg test cases, bigger parts of the
sendmsg code can be reused for this. Below are the strace view of
the recvmsg rewrites; the sendmsg side does not have a BPF prog
connected to it for the context of this test:

IPv4 test case:

  [pid  4846] bpf(BPF_PROG_ATTACH, {target_fd=3, attach_bpf_fd=4, attach_type=0x13 /* BPF_??? */, attach_flags=BPF_F_ALLOW_OVERRIDE}, 112) = 0
  [pid  4846] socket(AF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
  [pid  4846] bind(5, {sa_family=AF_INET, sin_port=htons(4444), sin_addr=inet_addr("127.0.0.1")}, 128) = 0
  [pid  4846] socket(AF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
  [pid  4846] sendmsg(6, {msg_name={sa_family=AF_INET, sin_port=htons(4444), sin_addr=inet_addr("127.0.0.1")}, msg_namelen=128, msg_iov=[{iov_base="a", iov_len=1}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1
  [pid  4846] select(6, [5], NULL, NULL, {tv_sec=2, tv_usec=0}) = 1 (in [5], left {tv_sec=1, tv_usec=999995})
  [pid  4846] recvmsg(5, {msg_name={sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, msg_namelen=128->16, msg_iov=[{iov_base="a", iov_len=64}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1
  [pid  4846] close(6)                    = 0
  [pid  4846] close(5)                    = 0
  [pid  4846] bpf(BPF_PROG_DETACH, {target_fd=3, attach_type=0x13 /* BPF_??? */}, 112) = 0

IPv6 test case:

  [pid  4846] bpf(BPF_PROG_ATTACH, {target_fd=3, attach_bpf_fd=4, attach_type=0x14 /* BPF_??? */, attach_flags=BPF_F_ALLOW_OVERRIDE}, 112) = 0
  [pid  4846] socket(AF_INET6, SOCK_DGRAM, IPPROTO_IP) = 5
  [pid  4846] bind(5, {sa_family=AF_INET6, sin6_port=htons(6666), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=htonl(0), sin6_scope_id=0}, 128) = 0
  [pid  4846] socket(AF_INET6, SOCK_DGRAM, IPPROTO_IP) = 6
  [pid  4846] sendmsg(6, {msg_name={sa_family=AF_INET6, sin6_port=htons(6666), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=htonl(0), sin6_scope_id=0}, msg_namelen=128, msg_iov=[{iov_base="a", iov_len=1}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1
  [pid  4846] select(6, [5], NULL, NULL, {tv_sec=2, tv_usec=0}) = 1 (in [5], left {tv_sec=1, tv_usec=999996})
  [pid  4846] recvmsg(5, {msg_name={sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=htonl(0), sin6_scope_id=0}, msg_namelen=128->28, msg_iov=[{iov_base="a", iov_len=64}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1
  [pid  4846] close(6)                    = 0
  [pid  4846] close(5)                    = 0
  [pid  4846] bpf(BPF_PROG_DETACH, {target_fd=3, attach_type=0x14 /* BPF_??? */}, 112) = 0

test_sock_addr run w/o strace view:

  # ./test_sock_addr.sh
  [...]
  Test case: recvmsg4: return code ok .. [PASS]
  Test case: recvmsg4: return code !ok .. [PASS]
  Test case: recvmsg6: return code ok .. [PASS]
  Test case: recvmsg6: return code !ok .. [PASS]
  Test case: recvmsg4: rewrite IP & port (asm) .. [PASS]
  Test case: recvmsg6: rewrite IP & port (asm) .. [PASS]
  [...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Trivial patch to bpftool in order to complete enabling attaching programs
to BPF_CGROUP_UDP{4,6}_RECVMSG.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Another trivial patch to libbpf in order to enable identifying and
attaching programs to BPF_CGROUP_UDP{4,6}_RECVMSG by section name.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Sync BPF uapi header in order to pull in BPF_CGROUP_UDP{4,6}_RECVMSG
attach types. This is done and preferred as an extra patch in order
to ease sync of libbpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently
to applications as also stated in original motivation in 7828f20e ("Merge
branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter
two hooks into Cilium to enable host based load-balancing with Kubernetes,
I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes
typically sets up DNS as a service and is thus subject to load-balancing.

Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API
is currently insufficient and thus not usable as-is for standard applications
shipped with most distros. To break down the issue we ran into with a simple
example:

  # cat /etc/resolv.conf
  nameserver 147.75.207.207
  nameserver 147.75.207.208

For the purpose of a simple test, we set up above IPs as service IPs and
transparently redirect traffic to a different DNS backend server for that
node:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

The attached BPF program is basically selecting one of the backends if the
service IP/port matches on the cgroup hook. DNS breaks here, because the
hooks are not transparent enough to applications which have built-in msg_name
address checks:

  # nslookup 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]
  ;; connection timed out; no servers could be reached

  # dig 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; connection timed out; no servers could be reached

For comparison, if none of the service IPs is used, and we tell nslookup
to use 8.8.8.8 directly it works just fine, of course:

  # nslookup 1.1.1.1 8.8.8.8
  1.1.1.1.in-addr.arpa	name = one.one.one.one.

In order to fix this and thus act more transparent to the application,
this needs reverse translation on recvmsg() side. A minimal fix for this
API is to add similar recvmsg() hooks behind the BPF cgroups static key
such that the program can track state and replace the current sockaddr_in{,6}
with the original service IP. From BPF side, this basically tracks the
service tuple plus socket cookie in an LRU map where the reverse NAT can
then be retrieved via map value as one example. Side-note: the BPF cgroups
static key should be converted to a per-hook static key in future.

Same example after this fix:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

Lookups work fine now:

  # nslookup 1.1.1.1
  1.1.1.1.in-addr.arpa    name = one.one.one.one.

  Authoritative answers can be found from:

  # dig 1.1.1.1

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; Got answer:
  ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550
  ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1

  ;; OPT PSEUDOSECTION:
  ; EDNS: version: 0, flags:; udp: 512
  ;; QUESTION SECTION:
  ;1.1.1.1.                       IN      A

  ;; AUTHORITY SECTION:
  .                       23426   IN      SOA     a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400

  ;; Query time: 17 msec
  ;; SERVER: 147.75.207.207#53(147.75.207.207)
  ;; WHEN: Tue May 21 12:59:38 UTC 2019
  ;; MSG SIZE  rcvd: 111

And from an actual packet level it shows that we're using the back end
server when talking via 147.75.207.20{7,8} front end:

  # tcpdump -i any udp
  [...]
  12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  [...]

In order to be flexible and to have same semantics as in sendmsg BPF
programs, we only allow return codes in [1,1] range. In the sendmsg case
the program is called if msg->msg_name is present which can be the case
in both, connected and unconnected UDP.

The former only relies on the sockaddr_in{,6} passed via connect(2) if
passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar
way to call into the BPF program whenever a non-NULL msg->msg_name was
passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note
that for TCP case, the msg->msg_name is ignored in the regular recvmsg
path and therefore not relevant.

For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE,
the hook is not called. This is intentional as it aligns with the same
semantics as in case of TCP cgroup BPF hooks right now. This might be
better addressed in future through a different bpf_attach_type such
that this case can be distinguished from the regular recvmsg paths,
for example.

Fixes: 1cedee13 ("bpf: Hooks for sys_sendmsg")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pull parisc fixes from Helge Deller:

 - Fix crashes when accessing PCI devices on some machines like C240 and
   J5000. The crashes were triggered because we replaced cache flushes
   by nops in the alternative coding where we shouldn't for some
   machines.

 - Dave fixed a race in the usage of the sr1 space register when used to
   load the coherence index.

 - Use the hardware lpa instruction to to load the physical address of
   kernel virtual addresses in the iommu driver code.

 - The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve
   that by rearranging functions in the final vmlinux executeable.

 - Some defconfig cleanups and removal of compiler warnings.

* 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix crash due alternative coding for NP iopdir_fdc bit
  parisc: Use lpa instruction to load physical addresses in driver code
  parisc: configs: Remove useless UEVENT_HELPER_PATH
  parisc: Use implicit space register selection for loading the coherence index of I/O pdirs
  parisc: Fix compiler warnings in float emulation code
  parisc/slab: cleanup after /proc/slab_allocators removal
  parisc: Allow building 64-bit kernel without -mlong-calls compiler option
  parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK

Pull crypto fixes from Herbert Xu:
 "This fixes a regression that breaks the jitterentropy RNG and a
  potential memory leak in hmac"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: hmac - fix memory leak in hmac_init_tfm()
  crypto: jitterentropy - change back to module_init()

Pull xfs fixes from Darrick Wong:
 "Here are a couple more bug fixes for 5.2. Changes since last update:

   - Fix some forgotten strings in a log debugging function

   - Fix incorrect unit conversion in online fsck code"

* tag 'xfs-5.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: inode btree scrubber should calculate im_boffset correctly
  xfs: fix broken log reservation debugging

Pull gfs2 fix from Andreas Gruenbacher:
 "A revert for a patch that turned out to be broken"

* tag 'gfs2-v5.2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: Replace gl_revokes with a GLF flag"

Pull overlayfs fixes from Miklos Szeredi:
 "Here's one fix for a class of bugs triggered by syzcaller, and one
  that makes xfstests fail less"

* tag 'ovl-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: doc: add non-standard corner cases
  ovl: detect overlapping layers
  ovl: support the FS_IOC_FS[SG]ETXATTR ioctls

Pull fuse fixes from Miklos Szeredi:
 "This fixes a leaked inode lock in an error cleanup path and a data
  consistency issue with copy_file_range().

  It also adds a new flag for the WRITE request that allows userspace
  filesystems to clear suid/sgid bits on the file if necessary"

* tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: extract helper for range writeback
  fuse: fix copy_file_range() in the writeback case
  fuse: add FUSE_WRITE_KILL_PRIV
  fuse: fallocate: fix return with locked inode

Pull NFS client fixes from Anna Schumaker:
 "These are mostly stable bugfixes found during testing, many during the
  recent NFS bake-a-thon.

  Stable bugfixes:
   - SUNRPC: Fix regression in umount of a secure mount
   - SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential
   - NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
   - NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled

  Other bugfixes:
   - xprtrdma: Use struct_size() in kzalloc()"

* tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled
  NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
  SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential
  SUNRPC fix regression in umount of a secure mount
  xprtrdma: Use struct_size() in kzalloc()

Currently, the process issuing a "start" command on the pktgen procfs
interface, acquires the pktgen thread lock and never release it, until
all pktgen threads are completed. The above can blocks indefinitely any
other pktgen command and any (even unrelated) netdevice removal - as
the pktgen netdev notifier acquires the same lock.

The issue is demonstrated by the following script, reported by Matteo:

ip -b - <<'EOF'
	link add type dummy
	link add type veth
	link set dummy0 up
EOF
modprobe pktgen
echo reset >/proc/net/pktgen/pgctrl
{
	echo rem_device_all
	echo add_device dummy0
} >/proc/net/pktgen/kpktgend_0
echo count 0 >/proc/net/pktgen/dummy0
echo start >/proc/net/pktgen/pgctrl &
sleep 1
rmmod veth

Fix the above releasing the thread lock around the sleep call.

Additionally we must prevent racing with forcefull rmmod - as the
thread lock no more protects from them. Instead, acquire a self-reference
before waiting for any thread. As a side effect, running

rmmod pktgen

while some thread is running now fails with "module in use" error,
before this patch such command hanged indefinitely.

Note: the issue predates the commit reported in the fixes tag, but
this fix can't be applied before the mentioned commit.

v1 -> v2:
 - no need to check for thread existence after flipping the lock,
   pktgen threads are freed only at net exit time
 -

Fixes: 6146e6a4 ("[PKTGEN]: Removes thread_{un,}lock() macros.")
Reported-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ADFS cleanups/fixes from Russell King:
 "As a result of some of Al Viro's great work, here are a few cleanups
  with fixes for adfs:

   - factor out filename comparison, so we can be sure that
     adfs_compare() (used for namei compare) and adfs_match() (used for
     lookup) have the same behaviour.

   - factor out filename lowering (which is not the same as tolower()
     which will lower top-bit-set characters) to ensure that we have the
     same behaviour when comparing filenames as when we hash them.

   - factor out the object fixups, so we are applying all fixups to
     directory objects in the same way, independent of the disk format.

   - factor out the object name fixup (into the previously factored out
     function) to ensure that filenames are appropriately translated -
     for example, adfs allows '/' in filenames, which being the Unix
     path separator, need to be translated to a different character,
     which is normally '.' (DOS 8.3 filenames represent the . as a / on
     adfs, so this is the expected reverse translation.)

   - remove filename truncation; Al asked about this and apparently the
     decision is to remove it. In any case, adfs's truncation was buggy,
     so this rids us of that bug by removing the truncation feature.

   - we now have only one location which adds the "filetype" suffix to
     the filename, so there's no point that code being out of line.

   - since we translate '/' into '.', an adfs filename of "/" or "//"
     would end up being translated to "." and ".." which have special
     meanings. In this case, change the first character to "^" to avoid
     these special directory names being abused"

* tag 'for-rc-adfs' of git://git.armlinux.org.uk/~rmk/linux-arm:
  fs/adfs: fix filename fixup handling for "/" and "//" names
  fs/adfs: move append_filetype_suffix() into adfs_object_fixup()
  fs/adfs: remove truncated filename hashing
  fs/adfs: factor out filename fixup
  fs/adfs: factor out object fixups
  fs/adfs: factor out filename case lowering
  fs/adfs: factor out filename comparison

Use a safe strscpy call to copy the ethtool stat strings into the
relevant buffers, instead of a memcpy that will be accessing
out-of-bound data.

Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the following tests last for several hours, the problem will occur.

Server:
    rds-stress -r 1.1.1.16 -D 1M
Client:
    rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30

The following will occur.

"
Starting up....
tsks   tx/s   rx/s  tx+rx K/s    mbi K/s    mbo K/s tx us/c   rtt us cpu
%
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
"
>From vmcore, we can find that clean_list is NULL.

>From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker.
Then rds_ib_mr_pool_flush_worker calls
"
 rds_ib_flush_mr_pool(pool, 0, NULL);
"
Then in function
"
int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool,
                         int free_all, struct rds_ib_mr **ibmr_ret)
"
ibmr_ret is NULL.

In the source code,
"
...
list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail);
if (ibmr_ret)
        *ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode);

/* more than one entry in llist nodes */
if (clean_nodes->next)
        llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list);
...
"
When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next
instead of clean_nodes is added in clean_list.
So clean_nodes is discarded. It can not be used again.
The workqueue is executed periodically. So more and more clean_nodes are
discarded. Finally the clean_list is NULL.
Then this problem will occur.

Fixes: 1bc144b6 ("net, rds, Replace xlist in net/rds/xlist.h with llist")
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Olivier Matz says:

====================
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl

The following code returns EFAULT (Bad address):

  s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6);
  setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1);
  sendto(ipv6_icmp6_packet, addr);   /* returns -1, errno = EFAULT */

The problem is fixed in the second patch. The first one aligns the
code to ipv4, to avoid a race condition in the second patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The following code returns EFAULT (Bad address):

  s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6);
  setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1);
  sendto(ipv6_icmp6_packet, addr);   /* returns -1, errno = EFAULT */

The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW
instead of IPPROTO_ICMPV6.

The failure happens because 2 bytes are eaten from the msghdr by
rawv6_probe_proto_opt() starting from commit 19e3c66b ("ipv6
equivalent of "ipv4: Avoid reading user iov twice after
raw_probe_proto_opt""), but at that time it was not a problem because
IPV6_HDRINCL was not yet introduced.

Only eat these 2 bytes if hdrincl == 0.

Fixes: 715f504b ("ipv6: add IPV6_HDRINCL option for raw sockets")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As it was done in commit 8f659a03 ("net: ipv4: fix for a race
condition in raw_sendmsg") and commit 20b50d79 ("net: ipv4: emulate
READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the
value of inet->hdrincl in a local variable, to avoid introducing a race
condition in the next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>