- 15 Jun, 2019 40 commits
-
-
Chao Yu authored
[ Upstream commit 22d61e28 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203227 - Overview When mounting the attached crafted image, following errors are reported. Additionally, it hangs on sync after trying to mount it. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces mkdir test mount -t f2fs tmp.img test sync - Messages kernel BUG at fs/f2fs/recovery.c:549! RIP: 0010:recover_data+0x167a/0x1780 Call Trace: f2fs_recover_fsync_data+0x613/0x710 f2fs_fill_super+0x1043/0x1aa0 mount_bdev+0x16d/0x1a0 mount_fs+0x4a/0x170 vfs_kern_mount+0x5d/0x100 do_mount+0x200/0xcf0 ksys_mount+0x79/0xc0 __x64_sys_mount+0x1c/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 During recovery, if ofs_of_node is inconsistent in between recovered node page and original checkpointed node page, let's just fail recovery instead of making kernel panic. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Miroslav Lichvar authored
[ Upstream commit fdc6bae9 ] The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock. It is typically set by NTP/PTP implementations and it is automatically updated by the kernel on leap seconds. The initial value is zero (which applications may interpret as unknown), but this value cannot be set by adjtimex. This limitation seems to go back to the original "nanokernel" implementation by David Mills. Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in order to allow setting it back to the initial value. Fixes: 153b5d05 ("ntp: support for TAI") Suggested-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.comSigned-off-by:
-
Fabien Dessenne authored
[ Upstream commit 68a1c848 ] On failure of_irq_get() returns a negative value or zero, which is not handled as an error in the existing implementation. Instead of using this API, use platform_get_irq() that returns exclusively a negative value on failure. Also, do not output an error log in case of defer probe error. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit f173747f ] Holding the spin-lock for all of the code in meson_pwm_apply() can result in a "BUG: scheduling while atomic". This can happen because clk_get_rate() (which is called from meson_pwm_calc()) may sleep. Only hold the spin-lock when modifying registers to solve this. The reason why we need a spin-lock in the driver is because the REG_MISC_AB register is shared between the two channels provided by one PWM controller. The only functions where REG_MISC_AB is modified are meson_pwm_enable() and meson_pwm_disable() so the register reads/writes in there need to be protected by the spin-lock. The original code also used the spin-lock to protect the values in struct meson_pwm_channel. This could be necessary if two consumers can use the same PWM channel. However, PWM core doesn't allow this so we don't need to protect the values in struct meson_pwm_channel with a lock. Fixes: 211ed630 ("pwm: Add support for Meson PWM Controller") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 2b8358a9 ] The mpc85xx EDAC driver can be configured as a module but then fails to build because it uses two unexported symbols: ERROR: ".pci_find_hose_for_OF_device" [drivers/edac/mpc85xx_edac_mod.ko] undefined! ERROR: ".early_find_capability" [drivers/edac/mpc85xx_edac_mod.ko] undefined! We don't want to export those symbols just for this driver, so make the driver only configurable as a built-in. This seems to have been broken since at least c92132f5 ("edac/85xx: Add PCIe error interrupt edac support") (Nov 2013). [ bp: make it depend on EDAC=y so that the EDAC core doesn't get built as a module. ] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Johannes Thumshirn <jth@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@ozlabs.org Cc: morbidrsa@gmail.com Link: https://lkml.kernel.org/r/20190502141941.12927-1-mpe@ellerman.id.auSigned-off-by:
-
Krzesimir Nowak authored
[ Upstream commit e2f7fc0a ] Commit 31fd8581 ("bpf: permits narrower load from bpf program context fields") made the verifier add AND instructions to clear the unwanted bits with a mask when doing a narrow load. The mask is computed with (1 << size * 8) - 1 where "size" is the size of the narrow load. When doing a 4 byte load of a an 8 byte field the verifier shifts the literal 1 by 32 places to the left. This results in an overflow of a signed integer, which is an undefined behavior. Typically, the computed mask was zero, so the result of the narrow load ended up being zero too. Cast the literal to long long to avoid overflows. Note that narrow load of the 4 byte fields does not have the undefined behavior, because the load size can only be either 1 or 2 bytes, so shifting 1 by 8 or 16 places will not overflow it. And reading 4 bytes would not be a narrow load of a 4 bytes field. Fixes: 31fd8581 ("bpf: permits narrower load from bpf program context fields") Reviewed-by:
Alban Crequy <alban@kinvolk.io> Reviewed-by:
Iago López Galeiras <iago@kinvolk.io> Signed-off-by:
Krzesimir Nowak <krzesimir@kinvolk.io> Cc: Yonghong Song <yhs@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit d2434e4d ] Cursor position updates were accidentally causing us to attempt to interlock window with window immediate, and without a matching window immediate update, NVDisplay could hang forever in some circumstances. Fixes suspend/resume on (at least) Quadro RTX4000 (TU104). Reported-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Josh Poimboeuf authored
[ Upstream commit e6da9567 ] The ignore flag is set on fake jumps in order to keep add_jump_destinations() from setting their jump_dest, since it already got set when the fake jump was created. But using the ignore flag is a bit of a hack. It's normally used to skip validation of an instruction, which doesn't really make sense for fake jumps. Also, after the next patch, using the ignore flag for fake jumps can trigger a false "why am I validating an ignored function?" warning. Instead just add an explicit check in add_jump_destinations() to skip fake jumps. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit 67793bd3 ] The driver currently sets register 0xfb (Low Refresh Rate) based on the value of mode->vrefresh. Firstly, this field is specified to be in Hz, but the magic numbers used by the code are Hz * 1000. This essentially leads to the low refresh rate always being set to 0x01, since the vrefresh value will always be less than 24000. Fix the magic numbers to be in Hz. Secondly, according to the comment in drm_modes.h, the field is not supposed to be used in a functional way anyway. Instead, use the helper function drm_mode_vrefresh(). Fixes: 9c8af882 ("drm: Add adv7511 encoder driver") Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Matt Redfearn <matt.redfearn@thinci.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.comSigned-off-by:
-
Peteris Rudzusiks authored
[ Upstream commit c4a52d66 ] nv50_head_atomic_duplicate_state() makes a copy of nv50_head_atom struct. This patch adds copying of struct member named "or", which previously was left uninitialized in the duplicated structure. Due to this bug, incorrect nhsync and nvsync values were sometimes used. In my particular case, that lead to a mismatch between the output resolution of the graphics device (GeForce GT 630 OEM) and the reported input signal resolution on the display. xrandr reported 1680x1050, but the display reported 1280x1024. As a result of this mismatch, the output on the display looked like it was cropped (only part of the output was actually visible on the display). git bisect pointed to commit 2ca7fb5c ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head"), which added the member "or" to nv50_head_atom structure, but forgot to copy it in nv50_head_atomic_duplicate_state(). Fixes: 2ca7fb5c ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head") Signed-off-by:
Peteris Rudzusiks <peteris.rudzusiks@gmail.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit a0b694d0 ] HW has error checks in place which check that pixel depth is explicitly provided on DP, while HDMI has a "default" setting that we use. In multi-display configurations with identical modelines, but different protocols (HDMI + DP, in this case), it was possible for the DP head to get swapped to the head which previously drove the HDMI output, without updating HeadSetControlOutputResource(), triggering the error check and hanging the core update. Reported-by:
-
Stephane Eranian authored
[ Upstream commit c7a28657 ] This patch fixes a restriction/bug introduced by: 583feb08 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") The original patch prevented using multi-entry PEBS when wakeup_events != 0. However given that wakeup_events is part of a union with wakeup_watermark, it means that in watermark mode, PEBS multi-entry is also disabled which is not the intent. This patch fixes this by checking is watermark mode is enabled. Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Cc: kan.liang@intel.com Cc: vincent.weaver@maine.edu Fixes: 583feb08 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") Link: http://lkml.kernel.org/r/20190514003400.224340-1-eranian@google.comSigned-off-by:
-
Tony Lindgren authored
[ Upstream commit 48171d0e ] I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: twl6040 0-004b: Failed to write 2d = 19: -121 And then any following register access will produce errors. There 2d offset above is register ACCCTL that gets written on twl6040 powerup. With error checking added to the related regcache_sync() call, the -EREMOTEIO error is reproducable on twl6040 powerup at least duovero. To fix the error, we need to wait until twl6040 is accessible after the powerup. Based on tests on omap4 duovero, we need to wait over 8ms after powerup before register write will complete without failures. Let's also make sure we warn about possible errors too. Note that we have twl6040_patch[] reg_sequence with the ACCCTL register configuration and regcache_sync() will write the new value to ACCCTL. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 13d03e9d ] Where possible, we want the failsafe link configuration (one which won't hang the OR during modeset because of not enough bandwidth for the mode) to also be supported by the sink. This prevents "link rate unsupported by sink" messages when link training fails. Signed-off-by:
-
Binbin Wu authored
[ Upstream commit dad06532 ] In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by:
Binbin Wu <binbin.wu@intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Daniel Gomez authored
[ Upstream commit 9e364e87 ] MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: spi:tps65912 After this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: of:N*T*Cti,tps65912C* alias: of:N*T*Cti,tps65912 alias: spi:tps65912 Reported-by:
Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by:
Daniel Gomez <dagmcr@gmail.com> Signed-off-by:
-
Amit Kucheria authored
[ Upstream commit fc7d18cf ] We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows: [ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4 [ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed [ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4 This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER. Signed-off-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Jiada Wang authored
[ Upstream commit 63f55fce ] Currently IRQ remains enabled after .remove, later if device is probed, IRQ is requested before .thermal_init, this may cause IRQ function be called before device is initialized. this patch disables interrupt in .remove, to ensure irq function only be called after device is fully initialized. Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Cyrill Gorcunov authored
[ Upstream commit a9e73998 ] While validating new map we require the @start_data to be strictly less than @end_data, which is fine for regular applications (this is why this nit didn't trigger for that long). These members are set from executable loaders such as elf handers, still it is pretty valid to have a loadable data section with zero size in file, in such case the start_data is equal to end_data once kernel loader finishes. As a result when we're trying to restore such programs the procedure fails and the kernel returns -EINVAL. From the image dump of a program: | "mm_start_code": "0x400000", | "mm_end_code": "0x8f5fb4", | "mm_start_data": "0xf1bfb0", | "mm_end_data": "0xf1bfb0", Thus we need to change validate_prctl_map from strictly less to less or equal operator use. Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan Fixes: f606b77f ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation") Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Cc: Andrey Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 745e1014 ] "cat /proc/slab_allocators" could hang forever on SMP machines with kmemleak or object debugging enabled due to other CPUs running do_drain() will keep making kmemleak_object or debug_objects_cache dirty and unable to escape the first loop in leaks_show(), do { set_store_user_clean(cachep); drain_cpu_caches(cachep); ... } while (!is_store_user_clean(cachep)); For example, do_drain slabs_destroy slab_destroy kmem_cache_free __cache_free ___cache_free kmemleak_free_recursive delete_object_full __delete_object put_object free_object_rcu kmem_cache_free cache_free_debugcheck --> dirty kmemleak_object One approach is to check cachep->name and skip both kmemleak_object and debug_objects_cache in leaks_show(). The other is to set store_user_clean after drain_cpu_caches() which leaves a small window between drain_cpu_caches() and set_store_user_clean() where per-CPU caches could be dirty again lead to slightly wrong information has been stored but could also speed up things significantly which sounds like a good compromise. For example, # cat /proc/slab_allocators 0m42.778s # 1st approach 0m0.737s # 2nd approach [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/20190411032635.10325-1-cai@lca.pw Fixes: d31676df ("mm/slab: alternative implementation for DEBUG_SLAB_LEAK") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
-
Yue Hu authored
[ Upstream commit f0fd5050 ] If not find zero bit in find_next_zero_bit(), it will return the size parameter passed in, so the start bit should be compared with bitmap_maxno rather than cma->count. Although getting maxchunk is working fine due to zero value of order_per_bit currently, the operation will be stuck if order_per_bit is set as non-zero. Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.comSigned-off-by:
Yue Hu <huyue2@yulong.com> Reviewed-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 024eee0e ] MADV_DONTNEED is handled with mmap_sem taken in read mode. We call page_mkclean without holding mmap_sem. MADV_DONTNEED implies that pages in the region are unmapped and subsequent access to the pages in that range is handled as a new page fault. This implies that if we don't have parallel access to the region when MADV_DONTNEED is run we expect those range to be unallocated. w.r.t page_mkclean() we need to make sure that we don't break the MADV_DONTNEED semantics. MADV_DONTNEED check for pmd_none without holding pmd_lock. This implies we skip the pmd if we temporarily mark pmd none. Avoid doing that while marking the page clean. Keep the sequence same for dax too even though we don't support MADV_DONTNEED for dax mapping The bug was noticed by code review and I didn't observe any failures w.r.t test run. This is similar to commit 58ceeb6b Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Thu Apr 13 14:56:26 2017 -0700 thp: fix MADV_DONTNEED vs. MADV_FREE race commit ced10803 Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Thu Apr 13 14:56:20 2017 -0700 thp: fix MADV_DONTNEED vs. numa balancing race Link: http://lkml.kernel.org/r/20190321040610.14226-1-aneesh.kumar@linux.ibm.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
-
Yue Hu authored
[ Upstream commit 2b59e01a ] Currently one bit in cma bitmap represents number of pages rather than one page, cma->count means cma size in pages. So to find available pages via find_next_zero_bit()/find_next_bit() we should use cma size not in pages but in bits although current free pages number is correct due to zero value of order_per_bit. Once order_per_bit is changed the bitmap status will be incorrect. The size input in cma_debug_show_areas() is not correct. It will affect the available pages at some position to debug the failure issue. This is an example with order_per_bit = 1 Before this change: [ 4.120060] cma: number of available pages: 1@93+4@108+7@121+7@137+7@153+7@169+7@185+7@201+3@213+3@221+3@229+3@237+3@245+3@253+3@261+3@269+3@277+3@285+3@293+3@301+3@309+3@317+3@325+19@333+15@369+512@512=> 638 free of 1024 total pages After this change: [ 4.143234] cma: number of available pages: 2@93+8@108+14@121+14@137+14@153+14@169+14@185+14@201+6@213+6@221+6@229+6@237+6@245+6@253+6@261+6@269+6@277+6@285+6@293+6@301+6@309+6@317+6@325+38@333+30@369=> 252 free of 1024 total pages Obviously the bitmap status before is incorrect. Link: http://lkml.kernel.org/r/20190320060829.9144-1-zbestahu@gmail.comSigned-off-by:
-
Baoquan He authored
[ Upstream commit d3ba3ae1 ] In node_states_check_changes_online(), N_HIGH_MEMORY is used to substitute ZONE_HIGHMEM directly. This is not right. N_HIGH_MEMORY is to mark the memory state of node. Here zone index is checked, which should be compared with 'ZONE_HIGHMEM' accordingly. Replace it with ZONE_HIGHMEM. This is a code cleanup - no known runtime effects. Link: http://lkml.kernel.org/r/20190320080732.14933-1-bhe@redhat.com Fixes: 8efe33f4 ("mm/memory_hotplug.c: simplify node_states_check_changes_online") Signed-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit dd7ef7bd ] In a low-memory situation, cc->fast_search_fail can keep increasing as it is unable to find an available page to isolate in fast_isolate_freepages(). As the result, it could trigger an error below, so just compare with the maximum bits can be shifted first. UBSAN: Undefined behaviour in mm/compaction.c:1160:30 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 131 PID: 1308 Comm: kcompactd1 Kdump: loaded Tainted: G W L 5.0.0+ #17 Call trace: dump_backtrace+0x0/0x450 show_stack+0x20/0x2c dump_stack+0xc8/0x14c __ubsan_handle_shift_out_of_bounds+0x7e8/0x8c4 compaction_alloc+0x2344/0x2484 unmap_and_move+0xdc/0x1dbc migrate_pages+0x274/0x1310 compact_zone+0x26ec/0x43bc kcompactd+0x15b8/0x1a24 kthread+0x374/0x390 ret_from_fork+0x10/0x18 [akpm@linux-foundation.org: code cleanup] Link: http://lkml.kernel.org/r/20190320203338.53367-1-cai@lca.pw Fixes: 70b44595 ("mm, compaction: use free lists to quickly locate a migration source") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 54c7a891 ] Patch series "initramfs tidyups". I've spent some time chasing down behavior in initramfs and found plenty of opportunity to improve the code. A first stab on that is contained in this series. This patch (of 7): We free the initrd memory for all successful or error cases except for the case where opening /initrd.image fails, which looks like an oversight. Steven said: : This also changes the behaviour when CONFIG_INITRAMFS_FORCE is enabled : - specifically it means that the initrd is freed (previously it was : ignored and never freed). But that seems like reasonable behaviour and : the previous behaviour looks like another oversight. Link: http://lkml.kernel.org/r/20190213174621.29297-3-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Steven Price <steven.price@arm.com> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Signed-off-by:
-
Yue Hu authored
[ Upstream commit 1df3a339 ] f022d8cb ("mm: cma: Don't crash on allocation if CMA area can't be activated") fixes the crash issue when activation fails via setting cma->count as 0, same logic exists if bitmap allocation fails. Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Linxu Fang authored
[ Upstream commit 299c83dc ] 342332e6 ("mm/page_alloc.c: introduce kernelcore=mirror option") and later patches rewrote the calculation of node spanned pages. e506b996 ("mem-hotplug: fix node spanned pages when we have a movable node"), but the current code still has problems, When we have a node with only zone_movable and the node id is not zero, the size of node spanned pages is double added. That's because we have an empty normal zone, and zone_start_pfn or zone_end_pfn is not between arch_zone_lowest_possible_pfn and arch_zone_highest_possible_pfn, so we need to use clamp to constrain the range just like the commit <96e907d1> (bootmem: Reimplement __absent_pages_in_range() using for_each_mem_pfn_range()). e.g. Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000023fffffff] Movable zone start for each node Node 0: 0x0000000100000000 Node 1: 0x0000000140000000 Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bffdffff] node 0: [mem 0x0000000100000000-0x000000013fffffff] node 1: [mem 0x0000000140000000-0x000000023fffffff] node 0 DMA spanned:0xfff present:0xf9e absent:0x61 node 0 DMA32 spanned:0xff000 present:0xbefe0 absent:0x40020 node 0 Normal spanned:0 present:0 absent:0 node 0 Movable spanned:0x40000 present:0x40000 absent:0 On node 0 totalpages(node_present_pages): 1048446 node_spanned_pages:1310719 node 1 DMA spanned:0 present:0 absent:0 node 1 DMA32 spanned:0 present:0 absent:0 node 1 Normal spanned:0x100000 present:0x100000 absent:0 node 1 Movable spanned:0x100000 present:0x100000 absent:0 On node 1 totalpages(node_present_pages): 2097152 node_spanned_pages:2097152 Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata, 4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K cma-reserved) It shows that the current memory of node 1 is double added. After this patch, the problem is fixed. node 0 DMA spanned:0xfff present:0xf9e absent:0x61 node 0 DMA32 spanned:0xff000 present:0xbefe0 absent:0x40020 node 0 Normal spanned:0 present:0 absent:0 node 0 Movable spanned:0x40000 present:0x40000 absent:0 On node 0 totalpages(node_present_pages): 1048446 node_spanned_pages:1310719 node 1 DMA spanned:0 present:0 absent:0 node 1 DMA32 spanned:0 present:0 absent:0 node 1 Normal spanned:0 present:0 absent:0 node 1 Movable spanned:0x100000 present:0x100000 absent:0 On node 1 totalpages(node_present_pages): 1048576 node_spanned_pages:1048576 memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata, 4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K cma-reserved) Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.comSigned-off-by:
Linxu Fang <fanglinxu@huawei.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit d9eb1417 ] Patch series "mm/memory_hotplug: Better error handling when removing memory", v1. Error handling when removing memory is somewhat messed up right now. Some errors result in warnings, others are completely ignored. Memory unplug code can essentially not deal with errors properly as of now. remove_memory() will never fail. We have basically two choices: 1. Allow arch_remov_memory() and friends to fail, propagating errors via remove_memory(). Might be problematic (e.g. DIMMs consisting of multiple pieces added/removed separately). 2. Don't allow the functions to fail, handling errors in a nicer way. It seems like most errors that can theoretically happen are really corner cases and mostly theoretical (e.g. "section not valid"). However e.g. aborting removal of sections while all callers simply continue in case of errors is not nice. If we can gurantee that removal of memory always works (and WARN/skip in case of theoretical errors so we can figure out what is going on), we can go ahead and implement better error handling when adding memory. E.g. via add_memory(): arch_add_memory() ret = do_stuff() if (ret) { arch_remove_memory(); goto error; } Handling here that arch_remove_memory() might fail is basically impossible. So I suggest, let's avoid reporting errors while removing memory, warning on theoretical errors instead and continuing instead of aborting. This patch (of 4): __add_pages() doesn't add the memory resource, so __remove_pages() shouldn't remove it. Let's factor it out. Especially as it is a special case for memory used as system memory, added via add_memory() and friends. We now remove the resource after removing the sections instead of doing it the other way around. I don't think this change is problematic. add_memory() register memory resource arch_add_memory() remove_memory arch_remove_memory() release memory resource While at it, explain why we ignore errors and that it only happeny if we remove memory in a different granularity as we added it. [david@redhat.com: fix printk warning] Link: http://lkml.kernel.org/r/20190417120204.6997-1-david@redhat.com Link: http://lkml.kernel.org/r/20190409100148.24703-2-david@redhat.comSigned-off-by:
-
Mike Kravetz authored
[ Upstream commit 0919e1b6 ] When a huge page is allocated, PagePrivate() is set if the allocation consumed a reservation. When freeing a huge page, PagePrivate is checked. If set, it indicates the reservation should be restored. PagePrivate being set at free huge page time mostly happens on error paths. When huge page reservations are created, a check is made to determine if the mapping is associated with an explicitly mounted filesystem. If so, pages are also reserved within the filesystem. The default action when freeing a huge page is to decrement the usage count in any associated explicitly mounted filesystem. However, if the reservation is to be restored the reservation/use count within the filesystem should not be decrementd. Otherwise, a subsequent page allocation and free for the same mapping location will cause the file filesystem usage to go 'negative'. Filesystem Size Used Avail Use% Mounted on nodev 4.0G -4.0M 4.1G - /opt/hugepool To fix, when freeing a huge page do not adjust filesystem usage if PagePrivate() is set to indicate the reservation should be restored. I did not cc stable as the problem has been around since reserves were added to hugetlbfs and nobody has noticed. Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Jérôme Glisse authored
[ Upstream commit 734fb899 ] To avoid random config build issue, select mmu notifier when HMM is selected. In any cases when HMM get selected it will be by users that will also wants the mmu notifier. Link: http://lkml.kernel.org/r/20190403193318.16478-2-jglisse@redhat.comSigned-off-by:
Jérôme Glisse <jglisse@redhat.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit be167862 ] Patch series "compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING", v3. This patch (of 11): When function tracing for IPIs is enabled, we get a warning for an overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as triggered by raise_nmi(): arch/arm/kernel/smp.c: In function 'raise_nmi': arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds] trace_ipi_raise(target, ipi_types[ipinr]); This is a correct warning as we actually overflow the array here. This patch raise_nmi() to call __smp_cross_call() instead of smp_cross_call(), to avoid calling into ftrace. For clarification, I'm also adding a two new code comments describing how this one is special. The warning appears to have shown up after commit e7273ff4 ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the number assignment from '15' to '8', but as far as I can tell has existed since the IPI tracepoints were first introduced. If we decide to backport this patch to stable kernels, we probably need to backport e7273ff4 as well. [yamada.masahiro@socionext.com: rebase on v5.1-rc1] Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com Fixes: e7273ff4 ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI") Fixes: 365ec7b1 ("ARM: add IPI tracepoints") # v3.17 Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Mathieu Malaterre <malat@debian.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Borislav Petkov <bp@suse.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Mike Rapoport authored
[ Upstream commit 94393c78 ] Since 0cbe3e26 ("mm: update ptep_modify_prot_start/commit to take vm_area_struct as arg") the only place that uses the local 'mm' variable in change_pte_range() is the call to set_pte_at(). Many architectures define set_pte_at() as macro that does not use the 'mm' parameter, which generates the following compilation warning: CC mm/mprotect.o mm/mprotect.c: In function 'change_pte_range': mm/mprotect.c:42:20: warning: unused variable 'mm' [-Wunused-variable] struct mm_struct *mm = vma->vm_mm; ^~ Fix it by passing vma->mm to set_pte_at() and dropping the local 'mm' variable in change_pte_range(). [liu.song.a23@gmail.com: fix missed conversions] Link: http://lkml.kernel.org/r/CAPhsuW6wcQgYLHNdBdw6m0YiR4RWsS4XzfpSKU7wBLLeOCTbpw@mail.gmail.comLink: http://lkml.kernel.org/r/1557305432-4940-1-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Guenter Roeck authored
[ Upstream commit 3e01ae26 ] The following warning is seen on systems with broken clock divider. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-09698-g1fb3b526 #1 Hardware name: ARM Integrator/CP (Device Tree) [<c0011be8>] (unwind_backtrace) from [<c000ebb8>] (show_stack+0x10/0x18) [<c000ebb8>] (show_stack) from [<c07d3fd0>] (dump_stack+0x18/0x24) [<c07d3fd0>] (dump_stack) from [<c0060d48>] (register_lock_class+0x674/0x6f8) [<c0060d48>] (register_lock_class) from [<c005de2c>] (__lock_acquire+0x68/0x2128) [<c005de2c>] (__lock_acquire) from [<c0060408>] (lock_acquire+0x110/0x21c) [<c0060408>] (lock_acquire) from [<c07f755c>] (_raw_spin_lock+0x34/0x48) [<c07f755c>] (_raw_spin_lock) from [<c0536c8c>] (pl111_display_enable+0xf8/0x5fc) [<c0536c8c>] (pl111_display_enable) from [<c0502f54>] (drm_atomic_helper_commit_modeset_enables+0x1ec/0x244) Since commit eedd6033 ("drm/pl111: Support variants with broken clock divider"), the spinlock is not initialized if the clock divider is broken. Initialize it earlier to fix the problem. Fixes: eedd6033 ("drm/pl111: Support variants with broken clock divider") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1557758781-23586-1-git-send-email-linux@roeck-us.netSigned-off-by:
-
Brian Masney authored
[ Upstream commit 90f94660 ] msm_gem_describe() would attempt to dereference a NULL pointer via the address space pointer when no IOMMU is present. Correct this by adding the appropriate check. Signed-off-by:
Brian Masney <masneyb@onstation.org> Fixes: 575f0485 ("drm/msm: Clean up and enhance the output of the 'gem' debugfs node") Signed-off-by:
-
Li Rongqing authored
[ Upstream commit d6a2946a ] msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is enabled on large memory SMP systems, the pages initialization can take a long time, if msgctl10 requests a huge block memory, and it will block rcu scheduler, so release cpu actively. After adding schedule() in free_msg, free_msg can not be called when holding spinlock, so adding msg to a tmp list, and free it out of spinlock rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505 rcu: Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978 rcu: (detected by 11, t=35024 jiffies, g=44237529, q=16542267) msgctl10 R running task 21608 32505 2794 0x00000082 Call Trace: preempt_schedule_irq+0x4c/0xb0 retint_kernel+0x1b/0x2d RIP: 0010:__is_insn_slot_addr+0xfb/0x250 Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48 RSP: 0018:ffff88bce041f758 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: dffffc0000000000 RBX: ffffffff8471bc50 RCX: ffffffff828a2a57 RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88bce041f780 RBP: ffff88bce041f828 R08: ffffed15f3f4c5b3 R09: ffffed15f3f4c5b3 R10: 0000000000000001 R11: ffffed15f3f4c5b2 R12: 000000318aee9b73 R13: ffffffff8471bc50 R14: 1ffff1179c083ef0 R15: 1ffff1179c083eec kernel_text_address+0xc1/0x100 __kernel_text_address+0xe/0x30 unwind_get_return_address+0x2f/0x50 __save_stack_trace+0x92/0x100 create_object+0x380/0x650 __kmalloc+0x14c/0x2b0 load_msg+0x38/0x1a0 do_msgsnd+0x19e/0xcf0 do_syscall_64+0x117/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170 rcu: (detected by 14, t=35016 jiffies, g=44237525, q=12423063) msgctl10 R running task 21608 32170 32155 0x00000082 Call Trace: preempt_schedule_irq+0x4c/0xb0 retint_kernel+0x1b/0x2d RIP: 0010:lock_acquire+0x4d/0x340 Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82 RSP: 0018:ffff88af83417738 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: dffffc0000000000 RBX: ffff88bd335f3080 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88bd335f3d64 RBP: ffff88af83417758 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed13f3f745b2 R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 is_bpf_text_address+0x32/0xe0 kernel_text_address+0xec/0x100 __kernel_text_address+0xe/0x30 unwind_get_return_address+0x2f/0x50 __save_stack_trace+0x92/0x100 save_stack+0x32/0xb0 __kasan_slab_free+0x130/0x180 kfree+0xfa/0x2d0 free_msg+0x24/0x50 do_msgrcv+0x508/0xe60 do_syscall_64+0x117/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe Davidlohr said: "So after releasing the lock, the msg rbtree/list is empty and new calls will not see those in the newly populated tmp_msg list, and therefore they cannot access the delayed msg freeing pointers, which is good. Also the fact that the node_cache is now freed before the actual messages seems to be harmless as this is wanted for msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the info->lock the thing is freed anyway so it should not change things" Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.comSigned-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Reviewed-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Christian Brauner authored
[ Upstream commit e260ad01 ] Currently when userspace gives us a values that overflow e.g. file-max and other callers of __do_proc_doulongvec_minmax() we simply ignore the new value and leave the current value untouched. This can be problematic as it gives the illusion that the limit has indeed be bumped when in fact it failed. This commit makes sure to return EINVAL when an overflow is detected. Please note that this is a userspace facing change. Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.ioSigned-off-by:
Christian Brauner <christian@brauner.io> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by:
-
Hou Tao authored
[ Upstream commit bd8309de ] fsync() needs to make sure the data & meta-data of file are persistent after the return of fsync(), even when a power-failure occurs later. In the case of fat-fs, the FAT belongs to the meta-data of file, so we need to issue a flush after the writeback of FAT instead before. Also bail out early when any stage of fsync fails. Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.comSigned-off-by:
Hou Tao <houtao1@huawei.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 23015b22 ] In case create_workqueue fails, the fix releases resources and returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Jonas Karlman authored
[ Upstream commit 5c5b90f5 ] Those calls are needed to restore a clean PM state when the probe fails or when the driver is unloaded such that future ->probe() calls can initialize runtime PM again. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
