- 08 Apr, 2023 8 commits
-
-
Dani Liberman authored
The register which needs to be cleared is the valid register instead of the address. Signed-off-by:
Dani Liberman <dliberman@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Tal Cohen authored
Fix an issue in hard reset flow in which the driver didn't send a disable pci message if there was an active compute context. In hard reset, disable pci message should be sent no matter if a compute context exists or not. Signed-off-by:
Tal Cohen <talcohen@habana.ai> Reviewed-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
-
Tal Cohen authored
The disable pci message is sent in reset device. It informs the FW not to raise more EQs. The Driver may ignore received EQs, when the device is in disabled mode. The duplication happens when hard reset is scheduled during compute reset and also performs 'escalate_reset_flow'. Signed-off-by:
-
Koby Elbaz authored
COMMS protocol is used for LKD <--> FW communication, and any communication failure between the two might turn out to be destructive, hence, it should be well emphasized. Signed-off-by:
Koby Elbaz <kelbaz@habana.ai> Reviewed-by:
-
Dafna Hirschfeld authored
since the function might fail and we should propagate the failure. Signed-off-by:
Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by:
-
Tal Cohen authored
When the device is in disabled state, the driver isn't suppose to receive any events from FW. Printing the event type, as part of the message that was already printed, shall help to get more info if this unexpected message is received. Signed-off-by:
-
Koby Elbaz authored
Once a memory mapping is added to the page tables, it's followed by a TLB invalidation request which could potentially fail (HW failure). Removing the mapping is simply a part of this failure handling routine. TLB invalidation failure prints were updated to be more accurate. Signed-off-by:
-
Cai Huoqing authored
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by:Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by:
-
- 06 Apr, 2023 22 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDaniel Vetter authored
- Fix DPT+shmem combo and add i915.enable_dpt modparam (Ville) - i915.enable_sagv module parameter (Ville) - Correction to QGV related register addresses (Vinod) - IPS debugfs per-crtc and new file for false_color (Ville) - More clean-up and reorganization of Display code (Jani) - DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati) - Make utility pin asserts more accurate (Ville) - Meteor Lake enabling (Daniele) - High refresh rate PSR fixes (Jouni) - Cursor and Plane chicken register fixes (Ville) - Align the ADL-P TypeC sequences with hardware specification (Imre) - Documentation build fixes and improvements to catch bugs earlier (Lee, Jani) - PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh) - DP aux sync fix and improvements (Ville) - DP MST fixes and w/a (Stanislav) - Limit PXP drm-errors or warning on firmware API failures (Alan) Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZC7RR3Laet8ywHRo@intel.com
-
https://gitlab.freedesktop.org/drm/tegraDaniel Vetter authored
drm/tegra: Changes for v6.4-rc1 The majority of this is minor cleanups and fixes. Other than those, this contains Uwe's conversion to the new driver remove callback and Thomas' fbdev DRM client conversion. The driver can now also be built on other architectures to easy compile coverage. Finally, this adds Mikko as a second maintainer for the driver. As a next step we also want Tegra DRM to move into drm-misc to streamline the maintenance process. Signed-off-by:
-
Jani Nikula authored
Fix the warning: drivers/gpu/drm/i915/intel_wakeref.h:118: warning: expecting prototype for intel_wakeref_get_if_in_use(). Prototype was for intel_wakeref_get_if_active() instead Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230405104142.766598-2-jani.nikula@intel.com
-
Jani Nikula authored
There's not much point in a static work function having a kernel-doc comment. Just clean it up and make it a regular comment. This fixes the kernel-doc warnings: drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Function parameter or member 'work' not described in 'intel_tc_port_disconnect_phy_work' drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Excess function parameter 'dig_port' description in 'intel_tc_port_disconnect_phy_work' Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v6.4-rc1: UAPI Changes: Cross-subsystem Changes: - Document port and rotation dt bindings better. - For panel timing DT bindings, document that vsync and hsync are first, rather than last in image. - Fix video/aperture typos. Core Changes: - Reject prime DMA-Buf attachment if get_sg_table is missing. (For self-importing dma-buf only.) - Add prime import/export to vram-helper. - Fix oops in drm/vblank when init is not called. - Fixup xres/yres_virtual and other fixes in fb helper. - Improve SCDC debugs. - Skip setting deadline on modesets. - Assorted TTM fixes. Driver Changes: - Add lima usage stats. - Assorted fixes to bridge/lt8192b, tc358767, ivpu, bridge/ti-sn65dsi83, ps8640. - Use pci aperture helpers in drm/ast lynxfb, radeonfb. - Revert some lima patches, as they required a commit that has been reverted upstream. - Add AUO NE135FBM-N41 v8.1 eDP panel. - Add QAIC accel driver. Signed-off-by:
-
Daniel Vetter authored
Merge tag 'drm-intel-gt-next-2023-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - (Build-time only, should not have any impact) drm/i915/uapi: Replace fake flex-array with flexible-array member "Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead." This is on core kernel request moving towards GCC 13. Driver Changes: - Fix context runtime accounting on sysfs fdinfo for heavy workloads (Tvrtko) - Add support for OA media units on MTL (Umesh) - Add new workarounds for Meteorlake (Daniele, Radhakrishna, Haridhar) - Fix sysfs to read actual frequency for MTL and Gen6 and earlier (Ashutosh) - Synchronize i915/BIOS on C6 enabling on MTL (Vinay) - Fix DMAR error noise due to GPU error capture (Andrej) - Fix forcewake during BAR resize on discrete (Andrzej) - Flush lmem contents after construction on discrete (Chris) - Fix GuC loading timeout on systems where IFWI programs low boot frequency (John) - Fix race condition UAF in i915_perf_add_config_ioctl (Min) - Sanitycheck MMIO access early in driver load and during forcewake (Matt) - Wakeref fixes for GuC RC error scenario and active VM tracking (Chris) - Cancel HuC delayed load timer on reset (Daniele) - Limit double GT reset to pre-MTL (Daniele) - Use i915 instead of dev_priv insied the file_priv structure (Andi) - Improve GuC load error reporting (John) - Simplify VCS/BSD engine selection logic (Tvrtko) - Perform uc late init after probe error injection (Andrzej) - Fix format for perf_limit_reasons in debugfs (Vinay) - Create per-gt debugfs files (Andi) - Documentation and kerneldoc fixes (Nirmoy, Lee) - Selftest improvements (Fei, Jonathan) Signed-off-by:
-
Nur Hussein authored
In tegra_sor_compute_config(), the 32-bit value mode->clock is multiplied by 1000, and assigned to the u64 variable pclk. We can avoid a potential 32-bit integer overflow by casting mode->clock to u64 before we do the arithmetic and assignment. Signed-off-by:
Nur Hussein <hussein@unixcat.org> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thomas Zimmermann authored
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to tegra_fbdev_setup() after tegra has registered its DRM device. As in most drivers, tegra's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within tegra. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
Initialize the fbdev client in the fbdev code with empty helper functions. Also clean up the client. The helpers will later implement various functionality of the DRM client. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Only build tegra's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION has been enabled. As part of this change, move the code into its own source file. No functional changes. Signed-off-by:
-
Thomas Hellström authored
When swapping in, or under memory pressure ttm_tt_populate() may sleep for a substantiable amount of time. Allow interrupts during the sleep. This will also allow us to inject -EINTR errors during swapin in upcoming patches. Also avoid returning VM_FAULT_OOM, since that will confuse the core mm, making it print out a confused message and retrying the fault. Return VM_FAULT_SIGBUS also under OOM conditions. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404200650.11043-4-thomas.hellstrom@linux.intel.com
-
Thomas Hellström authored
When swapping out, we will split multi-order pages both in order to move them to the swap-cache and to be able to return memory to the swap cache as soon as possible on a page-by-page basis. Reduce the page max order to the system PMD size, as we can then be nicer to the system and avoid splitting gigantic pages. Looking forward to when we might be able to swap out PMD size folios without splitting, this will also be a benefit. v2: - Include all orders up to the PMD size (Christian König) v3: - Avoid compilation errors for architectures with special PFN_SHIFTs Signed-off-by:
-
Thomas Hellström authored
When hitting an error, the error path forgot to unmap dma mappings and could call set_pages_wb() on already uncached pages. Fix this by introducing a common ttm_pool_free_range() function that does the right thing. v2: - Simplify that common function (Christian König) v3: - Rename that common function to ttm_pool_free_range() (Christian König) Fixes: d099fc8f ("drm/ttm: new TT backend allocation pool v3") Cc: Christian König <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Jeffrey Hugo authored
Add MAINTAINERS entry for the Qualcomm Cloud AI 100 driver. Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by:
Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by:
-
Jeffrey Hugo authored
Now that we have all the components of a minimum QAIC which can boot and run an AIC100 device, add the infrastructure that allows the QAIC driver to be built. Signed-off-by:
-
Pranjal Ramajor Asha Kanojiya authored
Some of the MHI channels for an AIC100 device need to be routed to userspace so that userspace can communicate directly with QSM. The MHI bus does not support this, and while the WWAN subsystem does (for the same reasons), AIC100 is not a WWAN device. Also, MHI is not something that other accelerators are expected to share, thus an accel subsystem function that meets this usecase is unlikely. Create a QAIC specific MHI userspace shim that exposes these channels. Start with QAIC_SAHARA which is required to boot AIC100 and is consumed by the kickstart application as documented in aic100.rst Each AIC100 instance (currently, up to 16) in a system will create a chardev for QAIC_SAHARA. This chardev will be found as /dev/<mhi instance>_QAIC_SAHARA For example - /dev/mhi0_QAIC_SAHARA Signed-off-by:
-
Jeffrey Hugo authored
Add the datapath component that manages BOs and submits them to running workloads on the qaic device via the dma_bridge hardware. This allows QAIC clients to interact with their workloads (run inferences) via the following ioctls along with mmap(): DRM_IOCTL_QAIC_CREATE_BO DRM_IOCTL_QAIC_MMAP_BO DRM_IOCTL_QAIC_ATTACH_SLICE_BO DRM_IOCTL_QAIC_EXECUTE_BO DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO DRM_IOCTL_QAIC_WAIT_BO DRM_IOCTL_QAIC_PERF_STATS_BO Signed-off-by:
-
Jeffrey Hugo authored
Add the control path component that talks to the management processor (QSM) to load workloads onto the AIC100 device. This implements the KMD portion of the NNC protocol over the QAIC_CONTROL MHI channel and the DRM_IOCTL_QAIC_MANAGE IOCTL to userspace. With this functionality, QAIC clients are able to load, run, and cleanup their workloads on the device but not interact with the workloads (run inferences). Signed-off-by:
-
Jeffrey Hugo authored
An AIC100 device contains a MHI interface with a number of different channels for controlling different aspects of the device. The MHI controller works with the MHI bus to enable and drive that interface. AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and expects the MHI bus to manage the process of loading and sending SBL to the device. Signed-off-by:
-
Jeffrey Hugo authored
Add the QAIC driver uapi file and core driver file that binds to the PCIe device. The core driver file also creates the accel device and manages all the interconnections between the different parts of the driver. The driver can be built as a module. If so, it will be called "qaic.ko". Signed-off-by:
-
Jeffrey Hugo authored
The Qualcomm Cloud AI 100 (AIC100) device is an Artificial Intelligence accelerator PCIe card. It contains a number of components both in the SoC and on the card which facilitate running workloads: QSM: management processor NSPs: workload compute units DMA Bridge: dedicated data mover for the workloads MHI: multiplexed communication channels DDR: workload storage and memory The Linux kernel driver for AIC100 is called "QAIC" and is located in the accel subsystem. Signed-off-by:
-
Daniel Vetter authored
If the crtc is being switched on or off then the semantics of computing the timestampe of the next vblank is somewhat ill-defined. And indeed, the code splats with a warning in the timestamp computation code. Specifically it hits the check to make sure that atomic drivers have full set up the timing constants in the drm_vblank structure, and that's just not the case before the crtc is actually on. For robustness it seems best to just not set deadlines for modesets. v2: Also skip on inactive crtc (Ville) Link: https://lore.kernel.org/dri-devel/dfc21f18-7e1e-48f0-c05a-d659b9c90b91@linaro.org/ Fixes: d39e48ca ("drm/atomic-helper: Set fence deadline for vblank") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reported-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # test patch only Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230405133105.947834-1-daniel.vetter@ffwll.ch
-
- 05 Apr, 2023 10 commits
-
-
Ville Syrjälä authored
Include the device and connector information in the SCDC debugs. Makes it easier to figure out who did what. v2: Rely on connector->ddc (Maxime) Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: intel-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Acked-by:
-
Daniel Vetter authored
Apparently drivers need to check all this stuff themselves, which for most things makes sense I guess. And for everything else we luck out, because modern distros stopped supporting any other fbdev drivers than drm ones and I really don't want to argue anymore about who needs to check stuff. Therefore fixing all this just for drm fbdev emulation is good enough. Note that var->active is not set or validated. This is just control flow for fbmem.c and needs to be validated in there as needed. Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Daniel Vetter authored
The fb_check_var hook is supposed to validate all this stuff. Any errors from fb_set_par are considered driver/hw issues and resulting in dmesg warnings. Luckily we do fix up the pixclock already, so this is all fine. Signed-off-by:
-
Daniel Vetter authored
Drivers are supposed to fix this up if needed if they don't outright reject it. Uncovered by 6c11df58 ("fbmem: Check virtual screen sizes in fb_set_var()"). Reported-by: syzbot+20dcf81733d43ddff661@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=c5faf983bfa4a607de530cd3bb008888bf06cefc Cc: stable@vger.kernel.org # v5.4+ Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Jani Nikula authored
Follow the contemporary naming style. Include some indentation fixes while at it on the affected statements. One function needs to keep using dev_priv due to implicit dev_priv usage in a macro. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Jani Nikula authored
Observe that intel_pm.[ch] is now purely about clock gating, so rename them to intel_clock_gating.[ch]. Rename the functions to intel_clock_gating_*() to follow coding conventions. Reviewed-by:
-
Alan Previn authored
MESA driver is creating protected context on every driver handle creation to query caps bits for app. So when running CI tests, they are observing hundreds of drm_errors when enabling PXP in .config but using SOC fusing or BIOS configuration that cannot support PXP sessions. The fixes tag referenced below was to resolve a related issue where we wanted to silence error messages, but that case was due to outdated IFWI (firmware) that definitely needed an upgrade and was, at that point, considered a one-off case as opposed to today's realization that default CI was enabling PXP in kernel config for all testing. So with this patch, let's strike a balance between issues that is critical but are root-caused from HW/platform gaps (louder drm-warn but just ONCE) vs other cases where it could also come from session state machine (which cannot be a WARN_ONCE since it can be triggered due to runtime operation events). Let's use helpers for these so as more functions are added in future features / HW (or as FW designers continue to bless upstreaming of the error codes and meanings), we only need to update the helpers. NOTE: Don't completely remove FW errors (via drm_debug) or else cusomer apps that really needs to know that content protection failed won't be aware of it. v2: - Add fixes tag (Trvtko) v3: - Break multi-line drm_dbg strings into separate drm_dbg (Daniele) - Fix couple of typecasting nits (Daniele) v4: - Unsuccessful PXP FW cmd due to platform configuration shouldn't use drm_WARN_once (Tvrtko), Switched to use drm_info_once. v5: - Added "reported-and-tested" by Eero. Reported-and-tested-by:Eero Tamminen <eero.t.tamminen@intel.com> Fixes: b762787b ("drm/i915/pxp: Use drm_dbg if arb session failed due to fw version") Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Alexander Stein authored
There is no need to require non-sleeping GPIO access. Silence the WARN_ON() if GPIO is using e.g. I2C expanders. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
AngeloGioacchino Del Regno authored
Add a panel entry with delay_200_500_e50 for the AUO NE135FBM-N41 version 8.1, found on a number of ACER laptops, including the Swift 3 (SF313-52, SF313-53), Chromebook Spin 513 (CP513-2H) and others. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
-
Thomas Zimmermann authored
Remove struct tegra_fbdev, which is an empty wrapper around struct drm_fb_helper. Use the latter directly. No functional changes. Signed-off-by:
-
