- 28 May, 2015 5 commits
-
-
Marcelo Tosatti authored
The periodic kvmclock sync can be an undesired source of latencies. When running cyclictest on a guest, a latency spike is visible. With kvmclock periodic sync disabled, the spike is gone. Guests should use ntp which means the propagations of ntp corrections from the host clock are unnecessary. v2: -> Make parameter read-only (Radim) -> Return early on kvmclock_sync_fn (Andrew) Reported-and-tested-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Prepare for multiple address spaces this way, since a VCPU is not available where unaccount_shadowed is called. We will get to the right kvm_memslots struct through the role field in struct kvm_mmu_page. Reviewed-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by:
Radim Krcmar <rkrcmar@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Most of the function that wrap it can be rewritten without it, except for gfn_to_pfn_prot. Just inline it into gfn_to_pfn_prot, and rewrite the other function on top of gfn_to_pfn_memslot*. Reviewed-by:
-
Paolo Bonzini authored
The memory slot is already available from gfn_to_memslot_dirty_bitmap. Isn't it a shame to look it up again? Plus, it makes gfn_to_page_many_atomic agnostic of multiple VCPU address spaces. Reviewed-by:
-
Paolo Bonzini authored
This lets the function access the new memory slot without going through kvm_memslots and id_to_memslot. It will simplify the code when more than one address space will be supported. Unfortunately, the "const"ness of the new argument must be casted away in two places. Fixing KVM to accept const struct kvm_memory_slot pointers would require modifications in pretty much all architectures, and is left for later. Reviewed-by:
-
- 26 May, 2015 4 commits
-
-
Paolo Bonzini authored
Prepare for the case of multiple address spaces. Reviewed-by:
-
Paolo Bonzini authored
Architecture-specific helpers are not supposed to muck with struct kvm_userspace_memory_region contents. Add const to enforce this. In order to eliminate the only write in __kvm_set_memory_region, the cleaning of deleted slots is pulled up from update_memslots to __kvm_set_memory_region. Reviewed-by:
-
Paolo Bonzini authored
kvm_memslots provides lockdep checking. Use it consistently instead of explicit dereferencing of kvm->memslots. Reviewed-by:
-
Paolo Bonzini authored
kvm_alloc_memslots is extracted out of previously scattered code that was in kvm_init_memslots_id and kvm_create_vm. kvm_free_memslot and kvm_free_memslots are new names of kvm_free_physmem and kvm_free_physmem_slot, but they also take an explicit pointer to struct kvm_memslots. This will simplify the transition to multiple address spaces, each represented by one pointer to struct kvm_memslots. Reviewed-by:
-
- 20 May, 2015 5 commits
-
-
Paolo Bonzini authored
Grab MPX bugfix, and fix conflicts against Rik's adaptive FPU deactivation patch. Signed-off-by: -
Liang Li authored
The MPX feature requires eager KVM FPU restore support. We have verified that MPX cannot work correctly with the current lazy KVM FPU restore mechanism. Eager KVM FPU restore should be enabled if the MPX feature is exposed to VM. Signed-off-by:
Yang Zhang <yang.z.zhang@intel.com> Signed-off-by:
Liang Li <liang.z.li@intel.com> [Also activate the FPU on AMD processors. - Paolo] Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
This reverts commit 4473b570. We'll use the hook again. Cc: stable@vger.kernel.org Signed-off-by:
-
Andrea Arcangeli authored
memslot->userfault_addr is set by the kernel with a mmap executed from the kernel but the userland can still munmap it and lead to the below oops after memslot->userfault_addr points to a host virtual address that has no vma or mapping. [ 327.538306] BUG: unable to handle kernel paging request at fffffffffffffffe [ 327.538407] IP: [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.538474] PGD 1a01067 PUD 1a03067 PMD 0 [ 327.538529] Oops: 0000 [#1] SMP [ 327.538574] Modules linked in: macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_filter ip_tables tun bridge stp llc rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ipmi_devintf iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp dcdbas intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd pcspkr sb_edac edac_core ipmi_si ipmi_msghandler acpi_pad wmi acpi_power_meter lpc_ich mfd_core mei_me [ 327.539488] mei shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc mlx4_ib ib_sa ib_mad ib_core mlx4_en vxlan ib_addr ip_tunnel xfs libcrc32c sd_mod crc_t10dif crct10dif_common crc32c_intel mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci i2c_core libahci mlx4_core libata tg3 ptp pps_core megaraid_sas ntb dm_mirror dm_region_hash dm_log dm_mod [ 327.539956] CPU: 3 PID: 3161 Comm: qemu-kvm Not tainted 3.10.0-240.el7.userfault19.4ca4011.x86_64.debug #1 [ 327.540045] Hardware name: Dell Inc. PowerEdge R420/0CN7CM, BIOS 2.1.2 01/20/2014 [ 327.540115] task: ffff8803280ccf00 ti: ffff880317c58000 task.ti: ffff880317c58000 [ 327.540184] RIP: 0010:[<ffffffff811a7b55>] [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.540261] RSP: 0018:ffff880317c5bcf8 EFLAGS: 00010246 [ 327.540313] RAX: 00057ffffffff000 RBX: ffff880616a20000 RCX: 0000000000000000 [ 327.540379] RDX: 0000000000002014 RSI: 00057ffffffff000 RDI: fffffffffffffffe [ 327.540445] RBP: ffff880317c5bd10 R08: 0000000000000103 R09: 0000000000000000 [ 327.540511] R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffffe [ 327.540576] R13: 0000000000000000 R14: ffff880317c5bd70 R15: ffff880317c5bd50 [ 327.540643] FS: 00007fd230b7f700(0000) GS:ffff880630800000(0000) knlGS:0000000000000000 [ 327.540717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 327.540771] CR2: fffffffffffffffe CR3: 000000062a2c3000 CR4: 00000000000427e0 [ 327.540837] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 327.540904] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 327.540974] Stack: [ 327.541008] ffffffffa05d6d0c ffff880616a20000 0000000000000000 ffff880317c5bdc0 [ 327.541093] ffffffffa05ddaa2 0000000000000000 00000000002191bf 00000042f3feab2d [ 327.541177] 00000042f3feab2d 0000000000000002 0000000000000001 0321000000000000 [ 327.541261] Call Trace: [ 327.541321] [<ffffffffa05d6d0c>] ? kvm_vcpu_reload_apic_access_page+0x6c/0x80 [kvm] [ 327.543615] [<ffffffffa05ddaa2>] vcpu_enter_guest+0x3f2/0x10f0 [kvm] [ 327.545918] [<ffffffffa05e2f10>] kvm_arch_vcpu_ioctl_run+0x2b0/0x5a0 [kvm] [ 327.548211] [<ffffffffa05e2d02>] ? kvm_arch_vcpu_ioctl_run+0xa2/0x5a0 [kvm] [ 327.550500] [<ffffffffa05ca845>] kvm_vcpu_ioctl+0x2b5/0x680 [kvm] [ 327.552768] [<ffffffff810b8d12>] ? creds_are_invalid.part.1+0x12/0x50 [ 327.555069] [<ffffffff810b8d71>] ? creds_are_invalid+0x21/0x30 [ 327.557373] [<ffffffff812d6066>] ? inode_has_perm.isra.49.constprop.65+0x26/0x80 [ 327.559663] [<ffffffff8122d985>] do_vfs_ioctl+0x305/0x530 [ 327.561917] [<ffffffff8122dc51>] SyS_ioctl+0xa1/0xc0 [ 327.564185] [<ffffffff816de829>] system_call_fastpath+0x16/0x1b [ 327.566480] Code: 0b 31 f6 4c 89 e7 e8 4b 7f ff ff 0f 0b e8 24 fd ff ff e9 a9 fd ff ff 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <48> f7 07 00 c0 00 00 55 48 89 e5 75 2a 8b 47 1c 85 c0 74 1e f0 Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Nicholas Krause authored
This makes the functions kvm_guest_cpu_init and kvm_init_debugfs static now due to having no external callers outside their declarations in the file, kvm.c. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
-
- 19 May, 2015 16 commits
-
-
Paolo Bonzini authored
gfn_to_pfn_async is used in just one place, and because of x86-specific treatment that place will need to look at the memory slot. Hence inline it into try_async_pf and export __gfn_to_pfn_memslot. The patch also switches the subsequent call to gfn_to_pfn_prot to use __gfn_to_pfn_memslot. This is a small optimization. Finally, remove the now-unused async argument of __gfn_to_pfn. Signed-off-by: -
Paolo Bonzini authored
The argument to KVM_GET_DIRTY_LOG is a memslot id; it may not match the position in the memslots array, which is sorted by gfn. Cc: stable@vger.kernel.org Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Xiao Guangrong authored
CR0.CD and CR0.NW are not used by shadow page table so that need not adjust mmu if these two bit are changed Signed-off-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
Xiao Guangrong authored
Currently, whenever guest MTRR registers are changed kvm_mmu_reset_context is called to switch to the new root shadow page table, however, it's useless since: 1) the cache type is not cached into shadow page's attribute so that the original root shadow page will be reused 2) the cache type is set on the last spte, that means we should sync the last sptes when MTRR is changed This patch fixs this issue by drop all the spte in the gfn range which is being updated by MTRR Signed-off-by:
-
Xiao Guangrong authored
There are some bugs in current get_mtrr_type(); 1: bit 1 of mtrr_state->enabled is corresponding bit 11 of IA32_MTRR_DEF_TYPE MSR which completely control MTRR's enablement that means other bits are ignored if it is cleared 2: the fixed MTRR ranges are controlled by bit 0 of mtrr_state->enabled (bit 10 of IA32_MTRR_DEF_TYPE) 3: if MTRR is disabled, UC is applied to all of physical memory rather than mtrr_state->def_type Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
-
Xiao Guangrong authored
Split kvm_unmap_rmapp and introduce kvm_zap_rmapp which will be used in the later patch Signed-off-by:
-
Xiao Guangrong authored
slot_handle_level and its helper functions are ready now, use them to clean up the code Signed-off-by:
-
Xiao Guangrong authored
There are several places walking all rmaps for the memslot so that introduce common functions to cleanup the code Signed-off-by:
-
Xiao Guangrong authored
It's used to abstract the code from kvm_handle_hva_range and it will be used by later patch Signed-off-by:
-
Xiao Guangrong authored
Suggested-by:
-
Xiao Guangrong authored
It's used to walk all the sptes on the rmap to clean up the code Signed-off-by:
-
Paolo Bonzini authored
This reverts commit ff7bbb9c. Sasha Levin is seeing odd jump in time values during boot of a KVM guest: [...] [ 0.000000] tsc: Detected 2260.998 MHz processor [3376355.247558] Calibrating delay loop (skipped) preset value.. [...] and bisected them to this commit. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Xiao Guangrong authored
KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by:
-
Nadav Amit authored
When a REP-string is executed in 64-bit mode with an address-size prefix, ECX/EDI/ESI are used as counter and pointers. When ECX is initially zero, Intel CPUs clear the high 32-bits of RCX, and recent Intel CPUs update the high bits of the pointers in MOVS/STOS. This behavior is specific to Intel according to few experiments. As one may guess, this is an undocumented behavior. Yet, it is observable in the guest, since at least VMX traps REP-INS/OUTS even when ECX=0. Note that VMware appears to get it right. The behavior can be observed using the following code: #include <stdio.h> #define LOW_MASK (0xffffffff00000000ull) #define ALL_MASK (0xffffffffffffffffull) #define TEST(opcode) \ do { \ asm volatile(".byte 0xf2 \n\t .byte 0x67 \n\t .byte " opcode "\n\t" \ : "=S"(s), "=c"(c), "=D"(d) \ : "S"(ALL_MASK), "c"(LOW_MASK), "D"(ALL_MASK)); \ printf("opcode %s rcx=%llx rsi=%llx rdi=%llx\n", \ opcode, c, s, d); \ } while(0) void main() { unsigned long long s, d, c; iopl(3); TEST("0x6c"); TEST("0x6d"); TEST("0x6e"); TEST("0x6f"); TEST("0xa4"); TEST("0xa5"); TEST("0xa6"); TEST("0xa7"); TEST("0xaa"); TEST("0xab"); TEST("0xae"); TEST("0xaf"); } Signed-off-by:Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Nadav Amit authored
When REP-string instruction is preceded with an address-size prefix, ECX/EDI/ESI are used as the operation counter and pointers. When they are updated, the high 32-bits of RCX/RDI/RSI are cleared, similarly to the way they are updated on every 32-bit register operation. Fix it. Signed-off-by:
-
Nadav Amit authored
If the host sets hardware breakpoints to debug the guest, and a task-switch occurs in the guest, the architectural DR7 will not be updated. The effective DR7 would be updated instead. This fix puts the DR7 update during task-switch emulation, so it now uses the standard DR setting mechanism instead of the one that was previously used. As a bonus, the update of DR7 will now be effective for AMD as well. Signed-off-by:
-
- 11 May, 2015 4 commits
-
-
Xiao Guangrong authored
KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by:
-
Paolo Bonzini authored
smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages should not be reused for different values of it. Thus, it has to be added to the mask in kvm_mmu_pte_write. Reviewed-by:
-
Xiao Guangrong authored
Current permission check assumes that RSVD bit in PFEC is always zero, however, it is not true since MMIO #PF will use it to quickly identify MMIO access Fix it by clearing the bit if walking guest page table is needed Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20150508' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and features for 4.2 (kvm/next) Mostly a bunch of fixes, reworks and optimizations for s390. There is one new feature (EDAT-2 inside the guest), which boils down to 2GB pages.
-
- 10 May, 2015 1 commit
-
-
Paul Mackerras authored
This fixes a regression introduced in commit 25fedfca, "KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu", which leads to a user-triggerable oops. In the case where we try to run a vcore on a physical core that is not in single-threaded mode, or the vcore has too many threads for the physical core, we iterate the list of runnable vcpus to make each one return an EBUSY error to userspace. Since this involves taking each vcpu off the runnable_threads list for the vcore, we need to use list_for_each_entry_safe rather than list_for_each_entry to traverse the list. Otherwise the kernel will crash with an oops message like this: Unable to handle kernel paging request for data at address 0x000fff88 Faulting instruction address: 0xd00000001e635dc8 Oops: Kernel access of bad area, sig: 11 [#2] SMP NR_CPUS=1024 NUMA PowerNV ... CPU: 48 PID: 91256 Comm: qemu-system-ppc Tainted: G D 3.18.0 #1 task: c00000274e507500 ti: c0000027d1924000 task.ti: c0000027d1924000 NIP: d00000001e635dc8 LR: d00000001e635df8 CTR: c00000000011ba50 REGS: c0000027d19275b0 TRAP: 0300 Tainted: G D (3.18.0) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22002824 XER: 00000000 CFAR: c000000000008468 DAR: 00000000000fff88 DSISR: 40000000 SOFTE: 1 GPR00: d00000001e635df8 c0000027d1927830 d00000001e64c850 0000000000000001 GPR04: 0000000000000001 0000000000000001 0000000000000000 0000000000000000 GPR08: 0000000000200200 0000000000000000 0000000000000000 d00000001e63e588 GPR12: 0000000000002200 c000000007dbc800 c000000fc7800000 000000000000000a GPR16: fffffffffffffffc c000000fd5439690 c000000fc7801c98 0000000000000001 GPR20: 0000000000000003 c0000027d1927aa8 c000000fd543b348 c000000fd543b350 GPR24: 0000000000000000 c000000fa57f0000 0000000000000030 0000000000000000 GPR28: fffffffffffffff0 c000000fd543b328 00000000000fe468 c000000fd543b300 NIP [d00000001e635dc8] kvmppc_run_core+0x198/0x17c0 [kvm_hv] LR [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv] Call Trace: [c0000027d1927830] [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv] (unreliable) [c0000027d1927a30] [d00000001e638350] kvmppc_vcpu_run_hv+0x5b0/0xdd0 [kvm_hv] [c0000027d1927b70] [d00000001e510504] kvmppc_vcpu_run+0x44/0x60 [kvm] [c0000027d1927ba0] [d00000001e50d4a4] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm] [c0000027d1927be0] [d00000001e504be8] kvm_vcpu_ioctl+0x5e8/0x7a0 [kvm] [c0000027d1927d40] [c0000000002d6720] do_vfs_ioctl+0x490/0x780 [c0000027d1927de0] [c0000000002d6ae4] SyS_ioctl+0xd4/0xf0 [c0000027d1927e30] [c000000000009358] syscall_exit+0x0/0x98 Instruction dump: 60000000 60420000 387e1b30 38800003 38a00001 38c00000 480087d9 e8410018 ebde1c98 7fbdf040 3bdee368 419e0048 <813e1b20> 939e1b18 2f890001 409effcc ---[ end trace 8cdf50251cca6680 ]--- Fixes: 25fedfcaSigned-off-by:
Paul Mackerras <paulus@samba.org> Reviewed-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
- 08 May, 2015 5 commits
-
-
David Hildenbrand authored
Our implementation will never trigger interception code 12 as the responsible setting is never enabled - and never will be. The handler is dead code. Let's get rid of it. Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
This patch factors out the search for a floating irq destination VCPU as well as the kicking of the found VCPU. The search is optimized in the following ways: 1. stopped VCPUs can't take any floating interrupts, so try to find an operating one. We have to take care of the special case where all VCPUs are stopped and we don't have any valid destination. 2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search especially if KVM_MAX_VCPU is increased one day. As these VCPU objects are initialized prior to increasing online_vcpus, we can be sure that they exist. Reviewed-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by:
Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by:
-
Jens Freimann authored
We can avoid checking guest control registers and guest PSW as well as all the masking and calculations on the interrupt masks when no interrupts are pending. Also, the check for IRQ_PEND_COUNT can be removed, because we won't enter the while loop if no interrupts are pending and invalid interrupt types can't be injected. Signed-off-by:
-
Christian Borntraeger authored
Some updates to the control blocks need to be done in a way that ensures that no CPU is within SIE. Provide wrappers around the s390_vcpu_block functions and adopt the TOD migration code to update in a guaranteed fashion. Also rename these functions to have the kvm_s390_ prefix as everything else. Signed-off-by:
-
Christian Borntraeger authored
exit_sie_sync is used to kick CPUs out of SIE and prevent reentering at any point in time. This is used to reload the prefix pages and to set the IBS stuff in a way that guarantees that after this function returns we are no longer in SIE. All current users trigger KVM requests. The request must be set before we block the CPUs to avoid races. Let's make this implicit by adding the request into a new function kvm_s390_sync_requests that replaces exit_sie_sync and split out s390_vcpu_block and s390_vcpu_unblock, that can be used to keep CPUs out of SIE independent of requests. Signed-off-by:
-
