- 07 Sep, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu fix from Greg Ungerer: "A single change to fix booting on ColdFire platforms that have RAM starting at a non-0 address" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix early memory reservation for ColdFire MMU systems
-
- 06 Sep, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fix from Paul Burton: "A single fix for v4.19-rc3, resolving a problem with our VDSO data page for systems with dcache aliasing. Those systems could previously observe stale data, causing clock_gettime() & gettimeofday() to return incorrect values" * tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: VDSO: Match data page cache colouring when D$ aliases
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Four small SMB3 fixes, three for stable, and one minor debug clarification" * tag '4.19-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: connect to servername instead of IP for IPC$ share smb3: check for and properly advertise directory lease support smb3: minor debugging clarifications in rfc1001 len processing SMB3: Backup intent flag missing for directory opens with backupuid mounts fs/cifs: don't translate SFM_SLASH (U+F026) to backslash
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Small collection of fixes that should go into this release. This contains: - Small series that fixes a race between blkcg teardown and writeback (Dennis Zhou) - Fix disallowing invalid block size settings from the nbd ioctl (me) - BFQ fix for a use-after-free on last release of a bfqg (Konstantin Khlebnikov) - Fix for the "don't warn for flush" fix (Mikulas)" * tag 'for-linus-20180906' of git://git.kernel.dk/linux-block: block: bfq: swap puts in bfqg_and_blkg_put block: don't warn when doing fsync on read-only devices nbd: don't allow invalid blocksize settings blkcg: use tryget logic when associating a blkg with a bio blkcg: delay blkg destruction until after writeback has finished Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()"
-
Konstantin Khlebnikov authored
Fix trivial use-after-free. This could be last reference to bfqg. Fixes: 8f9bebc3 ("block, bfq: access and cache blkg data only when safe") Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Linus Torvalds authored
Merge tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fix from John Johansen: "A fix for an issue syzbot discovered last week: - Fix for bad debug check when converting secids to secctx" * tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix bad debug check in apparmor_secid_to_secctx()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "This fixes two annoying bugs: - The first one is a side effect caused by using SRCU for rcuidle tracepoints. It seems that the perf was depending on the rcuidle tracepoints to make RCU watch when it wasn't. The real fix will be to have perf use SRCU instead of depending on RCU watching, but that can't be done until SRCU is safe to use in NMI context (Paul's working on that). - The second bug fix is for a bug that's been periodically making my tests fail randomly for some time. I haven't had time to track it down, but finally have. It has to do with stressing NMIs (via perf) while enabling or disabling ftrace function handling with lockdep enabled. If an interrupt happens and just as it returns, it sets lockdep back to "interrupts enabled" but before it returns an NMI is triggered, and if this happens while printk_nmi_enter has a breakpoint attached to it (because ftrace is converting it to or from nop to call fentry), the breakpoint trap also calls into lockdep, and since returning from the NMI to a interrupt handler, interrupts were disabled when the NMI went off, lockdep keeps its state as interrupts disabled when it returns back from the interrupt handler where interrupts are enabled. This causes lockdep_assert_irqs_enabled() to trigger a false positive" * tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: printk/tracing: Do not trace printk_nmi_enter() tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fix for improper fsync after hardlink - fix for a corruption during file deduplication - use after free fixes - RCU warning fix - fix for buffered write to nodatacow file * tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Fix suspicious RCU usage warning in btrfs_debug_in_rcu btrfs: use after free in btrfs_quota_enable btrfs: btrfs_shrink_device should call commit transaction at the end btrfs: fix qgroup_free wrong num_bytes in btrfs_subvolume_reserve_metadata Btrfs: fix data corruption when deduplicating between different files Btrfs: sync log after logging new name Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space
-
Steven Rostedt (VMware) authored
I hit the following splat in my tests: ------------[ cut here ]------------ IRQs not enabled as expected WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 EIP: tick_nohz_idle_enter+0x44/0x8c Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00 75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0 e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007 ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296 CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0 Call Trace: do_idle+0x33/0x202 cpu_startup_entry+0x61/0x63 start_secondary+0x18e/0x1ed startup_32_smp+0x164/0x168 irq event stamp: 18773830 hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10 hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10 softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b ---[ end trace b7c64aa79e17954a ]--- After a bit of debugging, I found what was happening. This would trigger when performing "perf" with a high NMI interrupt rate, while enabling and disabling function tracer. Ftrace uses breakpoints to convert the nops at the start of functions to calls to the function trampolines. The breakpoint traps disable interrupts and this makes calls into lockdep via the trace_hardirqs_off_thunk in the entry.S code. What happens is the following: do_idle { [interrupts enabled] <interrupt> [interrupts disabled] TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET test if pt_regs say return to interrupts enabled [yes] TRACE_IRQS_ON [lockdep says irqs are on] <nmi> nmi_enter() { printk_nmi_enter() [traced by ftrace] [ hit ftrace breakpoint ] <breakpoint exception> TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET [return from breakpoint] test if pt_regs say interrupts enabled [no] [iret back to interrupt] [iret back to code] tick_nohz_idle_enter() { lockdep_assert_irqs_enabled() [lockdep say no!] Although interrupts are indeed enabled, lockdep thinks it is not, and since we now do asserts via lockdep, it gives a false warning. The issue here is that printk_nmi_enter() is called before lockdep_off(), which disables lockdep (for this reason) in NMIs. By simply not allowing ftrace to see printk_nmi_enter() (via notrace annotation) we keep lockdep from getting confused. Cc: stable@vger.kernel.org Fixes: 42a0bb3f ("printk/nmi: generic solution for safe printk in NMI") Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 05 Sep, 2018 7 commits
-
-
Mikulas Patocka authored
It is possible to call fsync on a read-only handle (for example, fsck.ext2 does it when doing read-only check), and this call results in kernel warning. The patch b089cfd9 ("block: don't warn for flush on read-only device") attempted to disable the warning, but it is buggy and it doesn't (op_is_flush tests flags, but bio_op strips off the flags). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 721c7fc7 ("block: fail op_is_write() requests to read-only partitions") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Some GPIO fixes. The ACPI stuff is probably the most annoying for users that get fixed this time. - Atomic contexts, cansleep* calls and such fastpath/slopwpath things. - Defer ACPI event handler registration to late_initcall() so IRQs do not fire in our face before other drivers have a chance to register handlers. - Race condition if a consumer requests a GPIO after gpiochip_add_data_with_key() but before of_gpiochip_add() - Probe errorpath in the dwapb driver" * tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Fix crash due to registration race gpio: dwapb: Fix error handling in dwapb_gpio_probe() gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall gpiolib: acpi: Switch to cansleep version of GPIO library call gpio: adp5588: Fix sleep-in-atomic-context bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A set of very minor fixes and a couple of reverts to fix a major problem (the attempt to change the busy count causes a hang when attempting to change the drive cache type)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aacraid: fix a signedness bug Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq" Revert "scsi: core: fix scsi_host_queue_ready" scsi: libata: Add missing newline at end of file scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info() scsi: hpsa: limit transfer length to 1MB, not 512kB scsi: lpfc: Correct MDS diag and nvmet configuration scsi: lpfc: Default fdmi_on to on scsi: csiostor: fix incorrect port capabilities scsi: csiostor: add a check for NULL pointer after kmalloc() scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters scsi: core: Update SCSI_MQ_DEFAULT help text to match default
-
Linus Torvalds authored
Merge tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: "Contained in here are the bug fixes, building error fixes and ftrace support for nds32" * tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: linker script: GCOV kernel may refers data in __exit nds32: fix build error because of wrong semicolon nds32: Fix a kernel panic issue because of wrong frame pointer access. nds32: Only print one page of stack when die to prevent printing too much information. nds32: Add macro definition for offset of lp register on stack nds32: Remove the deprecated ABI implementation nds32/stack: Get real return address by using ftrace_graph_ret_addr nds32/ftrace: Support dynamic function graph tracer nds32/ftrace: Support dynamic function tracer nds32/ftrace: Add RECORD_MCOUNT support nds32/ftrace: Support static function graph tracer nds32/ftrace: Support static function tracer nds32: Extract the checking and getting pointer to a macro nds32: Clean up the coding style nds32: Fix get_user/put_user macro expand pointer problem nds32: Fix empty call trace nds32: add NULL entry to the end of_device_id array nds32: fix logic for module
-
Steven Rostedt (VMware) authored
Borislav reported the following splat: ============================= WARNING: suspicious RCU usage 4.19.0-rc1+ #1 Not tainted ----------------------------- ./include/linux/rcupdate.h:631 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 2, debug_locks = 1 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: 000000004557ee0e (rcu_read_lock){....}, at: perf_event_output_forward+0x0/0x130 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc1+ #1 Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET86WW (2.06 ) 11/13/2012 Call Trace: dump_stack+0x85/0xcb perf_event_output_forward+0xf6/0x130 __perf_event_overflow+0x52/0xe0 perf_swevent_overflow+0x91/0xb0 perf_tp_event+0x11a/0x350 ? find_held_lock+0x2d/0x90 ? __lock_acquire+0x2ce/0x1350 ? __lock_acquire+0x2ce/0x1350 ? retint_kernel+0x2d/0x2d ? find_held_lock+0x2d/0x90 ? tick_nohz_get_sleep_length+0x83/0xb0 ? perf_trace_cpu+0xbb/0xd0 ? perf_trace_buf_alloc+0x5a/0xa0 perf_trace_cpu+0xbb/0xd0 cpuidle_enter_state+0x185/0x340 do_idle+0x1eb/0x260 cpu_startup_entry+0x5f/0x70 start_kernel+0x49b/0x4a6 secondary_startup_64+0xa4/0xb0 This is due to the tracepoints moving to SRCU usage which does not require RCU to be "watching". But perf uses these tracepoints with RCU and expects it to be. Hence, we still need to add in the rcu_irq_enter/exit_irqson() calls for "rcuidle" tracepoints. This is a temporary fix until we have SRCU working in NMI context, and then perf can be converted to use that instead of normal RCU. Link: http://lkml.kernel.org/r/20180904162611.6a120068@gandalf.local.home Cc: x86-ml <x86@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov <bp@alien8.de> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Fixes: e6753f23 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Greentime Hu authored
This patch is used to fix nds32 allmodconfig/allyesconfig build error because GCOV kernel embeds counters in the kernel for each line and a part of that embed in __exit text. So we need to keep the EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y. Link: https://lkml.org/lkml/2018/9/1/125Signed-off-by: Greentime Hu <greentime@andestech.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: nilfs2: convert to SPDX license tags drivers/dax/device.c: convert variable to vm_fault_t type lib/Kconfig.debug: fix three typos in help text checkpatch: add __ro_after_init to known $Attribute mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name memory_hotplug: fix kernel_panic on offline page processing checkpatch: add optional static const to blank line declarations test ipc/shm: properly return EIDRM in shm_lock() mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported. mm/util.c: improve kvfree() kerneldoc tools/vm/page-types.c: fix "defined but not used" warning tools/vm/slabinfo.c: fix sign-compare warning kmemleak: always register debugfs file mm: respect arch_dup_mmap() return value mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm(). mm: memcontrol: print proper OOM header when no eligible victim left
-
- 04 Sep, 2018 24 commits
-
-
Ryusuke Konishi authored
Remove the verbose license text from NILFS2 files and replace them with SPDX tags. This does not change the license of any of the code. Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Souptick Joarder authored
As part of 226ab561 ("device-dax: Convert to vmf_insert_mixed and vm_fault_t") in 4.19-rc1, 'rc' was not converted to vm_fault_t. Now converted. Link: http://lkml.kernel.org/r/20180830153813.GA26059@jordon-HP-15-Notebook-PCSigned-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thibaut Sautereau authored
Fix three typos in CONFIG_WARN_ALL_UNSEEDED_RANDOM help text. Link: http://lkml.kernel.org/r/20180830194505.4778-1-thibaut@sautereau.frSigned-off-by: Thibaut Sautereau <thibaut@sautereau.fr> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
__ro_after_init is a specific __attribute__ that checkpatch does currently not understand. Add it to the known $Attribute types so that code that uses variables declared with __ro_after_init are not thought to be a modifier type. This appears as a defect in checkpatch output of code like: static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU); [...] if (trust_cpu && arch_init) { where checkpatch reports: ERROR: space prohibited after that '&&' (ctx:WxW) if (trust_cpu && arch_init) { Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com> Reported-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jiang authored
It looks like I missed the PUD path when doing VM_MIXEDMAP removal. This can be triggered by: 1. Boot with memmap=4G!8G 2. build ndctl with destructive flag on 3. make TESTS=device-dax check [ +0.000675] kernel BUG at mm/huge_memory.c:824! Applying the same change that was applied to vmf_insert_pfn_pmd() in the original patch. Link: http://lkml.kernel.org/r/153565957352.35524.1005746906902065126.stgit@djiang5-desk3.ch.intel.com Fixes: e1fb4a08 ("dax: remove VM_MIXEDMAP for fsdax and device dax") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Since this header is in "include/uapi/linux/", apparently people want to use it in userspace programs -- even in C++ ones. However, the header uses a C++ reserved keyword ("private"), so change that to "dh_private" instead to allow the header file to be used in C++ userspace. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051 Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org Fixes: ddbb4114 ("KEYS: Add KEYCTL_DH_COMPUTE command") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
Within show_valid_zones() the function test_pages_in_a_zone() should be called for online memory blocks only. Otherwise it might lead to the VM_BUG_ON due to uninitialized struct pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set): page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) ------------[ cut here ]------------ Call Trace: ([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168) [<0000000000923472>] show_valid_zones+0x5a/0x1a8 [<0000000000900284>] dev_attr_show+0x3c/0x78 [<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150 [<00000000003ef662>] seq_read+0x212/0x4b8 [<00000000003bf202>] __vfs_read+0x3a/0x178 [<00000000003bf3ca>] vfs_read+0x8a/0x148 [<00000000003bfa3a>] ksys_read+0x62/0xb8 [<0000000000bc2220>] system_call+0xdc/0x2d8 That VM_BUG_ON was triggered by the page poisoning introduced in mm/sparse.c with the git commit d0dc12e8 ("mm/memory_hotplug: optimize memory hotplug"). With the same commit the new 'nid' field has been added to the struct memory_block in order to store and later on derive the node id for offline pages (instead of accessing struct page which might be uninitialized). But one reference to nid in show_valid_zones() function has been overlooked. Fixed with current commit. Also, nr_pages will not be used any more after test_pages_in_a_zone() call, do not update it. Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com Fixes: d0dc12e8 ("mm/memory_hotplug: optimize memory hotplug") Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Using a static const struct definition as part of a series of declarations produces a false positive "Missing a blank line after declarations" for code like: WARNING: Missing a blank line after declarations #710: FILE: drivers/gpu/drm/tidss/tidss_scale_coefs.c:137: + int inc; + static const struct { So fix it. Link: http://lkml.kernel.org/r/5905126e70b0ed1781e49265fd5c49c5090d0223.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com> Reported-by: Jyri Sarha <jsarha@ti.com> Cc: "Valkeinen, Tomi" <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
When getting rid of the general ipc_lock(), this was missed furthermore, making the comment around the ipc object validity check bogus. Under EIDRM conditions, callers will in turn not see the error and continue with the operation. Link: http://lkml.kernel.org/r/20180824030920.GD3677@linux-r8p5 Link: http://lkml.kernel.org/r/20180823024051.GC13343@shao2-debian Fixes: 82061c57 ("ipc: drop ipc_lock()") Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Aneesh Kumar K.V authored
When scanning for movable pages, filter out Hugetlb pages if hugepage migration is not supported. Without this we hit infinte loop in __offline_pages() where we do pfn = scan_movable_pages(start_pfn, end_pfn); if (pfn) { /* We have movable pages */ ret = do_migrate_range(pfn, end_pfn); goto repeat; } Fix this by checking hugepage_migration_supported both in has_unmovable_pages which is the primary backoff mechanism for page offlining and for consistency reasons also into scan_movable_pages because it doesn't make any sense to return a pfn to non-migrateable huge page. This issue was revealed by, but not caused by 72b39cfc ("mm, memory_hotplug: do not fail offlining too early"). Link: http://lkml.kernel.org/r/20180824063314.21981-1-aneesh.kumar@linux.ibm.com Fixes: 72b39cfc ("mm, memory_hotplug: do not fail offlining too early") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Haren Myneni <haren@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Scooped from an email from Matthew. Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
debugfs_known_mountpoints[] is not used any more, so let's remove it. Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
Currently we get the following compiler warning: slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (s->object_size < min_objsize) ^ due to the mismatch of signed/unsigned comparison. ->object_size and ->slab_size are never expected to be negative, so let's define them as unsigned int. [n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative] Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vincent Whitchurch authored
If kmemleak built in to the kernel, but is disabled by default, the debugfs file is never registered. Because of this, it is not possible to find out if the kernel is built with kmemleak support by checking for the presence of this file. To allow this, always register the file. After this patch, if the file doesn't exist, kmemleak is not available in the kernel. If writing "scan" or any other value than "clear" to this file results in EBUSY, then kmemleak is available but is disabled by default and can be activated via the kernel command line. Catalin: "that's also consistent with a late disabling of kmemleak when the debugfs entry sticks around." Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.comSigned-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nadav Amit authored
Commit d70f2a14 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc") ignored the return value of arch_dup_mmap(). As a result, on x86, a failure to duplicate the LDT (e.g. due to memory allocation error) would leave the duplicated memory mapping in an inconsistent state. Fix by using the return value, as it was before the change. Link: http://lkml.kernel.org/r/20180823051229.211856-1-namit@vmware.com Fixes: d70f2a14 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc") Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tetsuo Handa authored
Commit 93065ac7 ("mm, oom: distinguish blockable mode for mmu notifiers") has added an ability to skip over vmas with blockable mmu notifiers. This however didn't call tlb_finish_mmu as it should. As a result inc_tlb_flush_pending has been called without its pairing dec_tlb_flush_pending and all callers mm_tlb_flush_pending would flush even though this is not really needed. This alone is not harmful and it seems there shouldn't be any such callers for oom victims at all but there is no real reason to skip tlb_finish_mmu on early skip either so call it. [mhocko@suse.com: new changelog] Link: http://lkml.kernel.org/r/b752d1d5-81ad-7a35-2394-7870641be51c@i-love.sakura.ne.jpSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
When the memcg OOM killer runs out of killable tasks, it currently prints a WARN with no further OOM context. This has caused some user confusion. Warnings indicate a kernel problem. In a reported case, however, the situation was triggered by a nonsensical memcg configuration (hard limit set to 0). But without any VM context this wasn't obvious from the report, and it took some back and forth on the mailing list to identify what is actually a trivial issue. Handle this OOM condition like we handle it in the global OOM killer: dump the full OOM context and tell the user we ran out of tasks. This way the user can identify misconfigurations easily by themselves and rectify the problem - without having to go through the hassle of running into an obscure but unsettling warning, finding the appropriate kernel mailing list and waiting for a kernel developer to remote-analyze that the memcg configuration caused this. If users cannot make sense of why the OOM killer was triggered or why it failed, they will still report it to the mailing list, we know that from experience. So in case there is an actual kernel bug causing this, kernel developers will very likely hear about it. Link: http://lkml.kernel.org/r/20180821160406.22578-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Must perform TXQ teardown before unregistering interfaces in mac80211, from Toke Høiland-Jørgensen. 2) Don't allow creating mac80211_hwsim with less than one channel, from Johannes Berg. 3) Division by zero in cfg80211, fix from Johannes Berg. 4) Fix endian issue in tipc, from Haiqing Bai. 5) BPF sockmap use-after-free fixes from Daniel Borkmann. 6) Spectre-v1 in mac80211_hwsim, from Jinbum Park. 7) Missing rhashtable_walk_exit() in tipc, from Cong Wang. 8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when kvzalloc() tries to use kmalloc() pages. From Eric Dumazet. 9) Fix deadlock in hv_netvsc, from Dexuan Cui. 10) Do not restart timewait timer on RST, from Florian Westphal. 11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev. 12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu. 13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai. 14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu. 15) Use-after-free in act_ife, fix from Cong Wang. 16) Missing hold to meta module in act_ife, from Vlad Buslov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) net: phy: sfp: Handle unimplemented hwmon limits and alarms net: sched: action_ife: take reference to meta module act_ife: fix a potential use-after-free net/mlx5: Fix SQ offset in QPs with small RQ tipc: correct spelling errors for tipc_topsrv_queue_evt() comments tipc: correct spelling errors for struct tipc_bc_base's comment bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA. bnxt_en: Clean up unused functions. bnxt_en: Fix firmware signaled resource change logic in open. sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel sctp: fix invalid reference to the index variable of the iterator net/ibm/emac: wrong emac_calc_base call was used by typo net: sched: null actions array pointer before releasing action vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition r8169: add support for NCube 8168 network card ip6_tunnel: respect ttl inherit for ip6tnl mac80211: shorten the IBSS debug messages mac80211: don't Tx a deauth frame if the AP forbade Tx mac80211: Fix station bandwidth setting after channel switch mac80211: fix a race between restart and CSA flows ...
-
Andrew Lunn authored
Not all SFPs implement the registers containing sensor limits and alarms. Luckily, there is a bit indicating if they are implemented or not. Add checking for this bit, when deciding if the hwmon attributes should be visible. Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Recent refactoring of add_metainfo() caused use_all_metadata() to add metainfo to ife action metalist without taking reference to module. This causes warning in module_put called from ife action cleanup function. Implement add_metainfo_and_get_ops() function that returns with reference to module taken if metainfo was added successfully, and call it from use_all_metadata(), instead of calling __add_metainfo() directly. Example warning: [ 646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230 [ 646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas [ 646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799 [ 646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 646.440595] RIP: 0010:module_put+0x1cb/0x230 [ 646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b [ 646.464997] RSP: 0018:ffff880354d37068 EFLAGS: 00010286 [ 646.470599] RAX: 0000000000000000 RBX: ffffffffc0a52518 RCX: ffffffff8c2668db [ 646.478118] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffc0a52518 [ 646.485641] RBP: ffffffffc0a52180 R08: fffffbfff814a4a4 R09: fffffbfff814a4a3 [ 646.493164] R10: ffffffffc0a5251b R11: fffffbfff814a4a4 R12: 1ffff1006a9a6e0d [ 646.500687] R13: 00000000ffffffff R14: ffff880362bab890 R15: dead000000000100 [ 646.508213] FS: 00007f4164c99800(0000) GS:ffff88036fe40000(0000) knlGS:0000000000000000 [ 646.516961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 646.523080] CR2: 00007f41638b8420 CR3: 0000000351df0004 CR4: 00000000001606e0 [ 646.530595] Call Trace: [ 646.533408] ? find_symbol_in_section+0x260/0x260 [ 646.538509] tcf_ife_cleanup+0x11b/0x200 [act_ife] [ 646.543695] tcf_action_cleanup+0x29/0xa0 [ 646.548078] __tcf_action_put+0x5a/0xb0 [ 646.552289] ? nla_put+0x65/0xe0 [ 646.555889] __tcf_idr_release+0x48/0x60 [ 646.560187] tcf_generic_walker+0x448/0x6b0 [ 646.564764] ? tcf_action_dump_1+0x450/0x450 [ 646.569411] ? __lock_is_held+0x84/0x110 [ 646.573720] ? tcf_ife_walker+0x10c/0x20f [act_ife] [ 646.578982] tca_action_gd+0x972/0xc40 [ 646.583129] ? tca_get_fill.constprop.17+0x250/0x250 [ 646.588471] ? mark_lock+0xcf/0x980 [ 646.592324] ? check_chain_key+0x140/0x1f0 [ 646.596832] ? debug_show_all_locks+0x240/0x240 [ 646.601839] ? memset+0x1f/0x40 [ 646.605350] ? nla_parse+0xca/0x1a0 [ 646.609217] tc_ctl_action+0x215/0x230 [ 646.613339] ? tcf_action_add+0x220/0x220 [ 646.617748] rtnetlink_rcv_msg+0x56a/0x6d0 [ 646.622227] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.626466] netlink_rcv_skb+0x18d/0x200 [ 646.630752] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.634959] ? netlink_ack+0x500/0x500 [ 646.639106] netlink_unicast+0x2d0/0x370 [ 646.643409] ? netlink_attachskb+0x340/0x340 [ 646.648050] ? _copy_from_iter_full+0xe9/0x3e0 [ 646.652870] ? import_iovec+0x11e/0x1c0 [ 646.657083] netlink_sendmsg+0x3b9/0x6a0 [ 646.661388] ? netlink_unicast+0x370/0x370 [ 646.665877] ? netlink_unicast+0x370/0x370 [ 646.670351] sock_sendmsg+0x6b/0x80 [ 646.674212] ___sys_sendmsg+0x4a1/0x520 [ 646.678443] ? copy_msghdr_from_user+0x210/0x210 [ 646.683463] ? lock_downgrade+0x320/0x320 [ 646.687849] ? debug_show_all_locks+0x240/0x240 [ 646.692760] ? do_raw_spin_unlock+0xa2/0x130 [ 646.697418] ? _raw_spin_unlock+0x24/0x30 [ 646.701798] ? __handle_mm_fault+0x1819/0x1c10 [ 646.706619] ? __pmd_alloc+0x320/0x320 [ 646.710738] ? debug_show_all_locks+0x240/0x240 [ 646.715649] ? restore_nameidata+0x7b/0xa0 [ 646.720117] ? check_chain_key+0x140/0x1f0 [ 646.724590] ? check_chain_key+0x140/0x1f0 [ 646.729070] ? __fget_light+0xbc/0xd0 [ 646.733121] ? __sys_sendmsg+0xd7/0x150 [ 646.737329] __sys_sendmsg+0xd7/0x150 [ 646.741359] ? __ia32_sys_shutdown+0x30/0x30 [ 646.746003] ? up_read+0x53/0x90 [ 646.749601] ? __do_page_fault+0x484/0x780 [ 646.754105] ? do_syscall_64+0x1e/0x2c0 [ 646.758320] do_syscall_64+0x72/0x2c0 [ 646.762353] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 646.767776] RIP: 0033:0x7f4163872150 [ 646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 646.791474] RSP: 002b:00007ffdef7d6b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 646.799721] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f4163872150 [ 646.807240] RDX: 0000000000000000 RSI: 00007ffdef7d6bd0 RDI: 0000000000000003 [ 646.814760] RBP: 000000005b8b9482 R08: 0000000000000001 R09: 0000000000000000 [ 646.822286] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdef7dad20 [ 646.829807] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000679bc0 [ 646.837360] irq event stamp: 6083 [ 646.841043] hardirqs last enabled at (6081): [<ffffffff8c220a7d>] __call_rcu+0x17d/0x500 [ 646.849882] hardirqs last disabled at (6083): [<ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c [ 646.859775] softirqs last enabled at (5968): [<ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee [ 646.868784] softirqs last disabled at (6082): [<ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife] [ 646.878845] ---[ end trace b1b8c12ffe51e657 ]--- Fixes: 5ffe57da ("act_ife: fix a potential deadlock") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
Immediately after module_put(), user could delete this module, so e->ops could be already freed before we call e->ops->release(). Fix this by moving module_put() after ops->release(). Fixes: ef6980b6 ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Correct the formula for calculating the RQ page remainder, which should be in byte granularity. The result will be non-zero only for RQs smaller than PAGE_SIZE, as an RQ size is a power of 2. Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the SQ offset in strides granularity. Fixes: d7037ad7 ("net/mlx5: Fix QP fragmented buffer allocation") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jens Axboe authored
syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl. We need proper validation of the input here. Not just if it's zero, but also if the value is a power-of-2 and in a valid range. Add that. Cc: stable@vger.kernel.org Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Greentime Hu authored
It shall be removed in the define usage. We shall not put a semicolon there. /kisskb/src/arch/nds32/include/asm/elf.h:126:29: error: expected '}' before ';' token #define ELF_DATA ELFDATA2LSB; ^ /kisskb/src/fs/proc/kcore.c:318:17: note: in expansion of macro 'ELF_DATA' [EI_DATA] = ELF_DATA, ^~~~~~~~ /kisskb/src/fs/proc/kcore.c:312:15: note: to match this '{' .e_ident = { ^ /kisskb/src/scripts/Makefile.build:307: recipe for target 'fs/proc/kcore.o' failed Signed-off-by: Greentime Hu <greentime@andestech.com>
-