- 19 Apr, 2023 6 commits
-
-
Paolo Abeni authored
The mptcp worker and mptcp_accept() can race, as reported by Christoph: refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 14351 at lib/refcount.c:25 refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Modules linked in: CPU: 1 PID: 14351 Comm: syz-executor.2 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Code: 02 31 ff 89 de e8 1b f0 a7 ff 84 db 0f 85 6e ff ff ff e8 3e f5 a7 ff 48 c7 c7 d8 c7 34 83 c6 05 6d 2d 0f 02 01 e8 cb 3d 90 ff <0f> 0b e9 4f ff ff ff e8 1f f5 a7 ff 0f b6 1d 54 2d 0f 02 31 ff 89 RSP: 0018:ffffc90000a47bf8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802eae98c0 RSI: ffffffff81097d4f RDI: 0000000000000001 RBP: ffff88802e712180 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffff88802eaea148 R12: ffff88802e712100 R13: ffff88802e712a88 R14: ffff888005cb93a8 R15: ffff88802e712a88 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f277fd89120 CR3: 0000000035486002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_add include/linux/refcount.h:199 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] sock_hold include/net/sock.h:775 [inline] __mptcp_close+0x4c6/0x4d0 net/mptcp/protocol.c:3051 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x56/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x51/0xf0 net/socket.c:653 sock_close+0x18/0x20 net/socket.c:1395 __fput+0x113/0x430 fs/file_table.c:321 task_work_run+0x96/0x100 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x4fc/0x10c0 kernel/exit.c:869 do_group_exit+0x51/0xf0 kernel/exit.c:1019 get_signal+0x12b0/0x1390 kernel/signal.c:2859 arch_do_signal_or_restart+0x25/0x260 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x131/0x1a0 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x19/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fec4b4926a9 Code: Unable to access opcode bytes at 0x7fec4b49267f. RSP: 002b:00007fec49f9dd78 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00000000006bc058 RCX: 00007fec4b4926a9 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006bc058 RBP: 00000000006bc050 R08: 00000000007df998 R09: 00000000007df998 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 000000000000000b R15: 000000000001fe40 </TASK> The root cause is that the worker can force fallback to TCP the first mptcp subflow, actually deleting the unaccepted msk socket. We can explicitly prevent the race delaying the unaccepted msk deletion at listener shutdown time. In case the closed subflow is later accepted, just drop the mptcp context and let the user-space deal with the paired mptcp socket. Fixes: b6985b9b ("mptcp: use the workqueue to destroy unaccepted sockets") Cc: stable@vger.kernel.org Reported-by:
Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/375Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This is a partial revert of the blamed commit, with a relevant change: mptcp_subflow_queue_clean() now just change the msk socket status and stop the worker, so that the UaF issue addressed by the blamed commit is not re-introduced. The above prevents the mptcp worker from running concurrently with inet_csk_listen_stop(), as such race would trigger a warning, as reported by Christoph: RSP: 002b:00007f784fe09cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e WARNING: CPU: 0 PID: 25807 at net/ipv4/inet_connection_sock.c:1387 inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f7850afd6a9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000004 Modules linked in: RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> CPU: 0 PID: 25807 Comm: syz-executor.7 Not tainted 6.2.0-g778e54711659 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: 0000000000000000 RBX: ffff888100dfbd40 RCX: 0000000000000000 RDX: ffff8881363aab80 RSI: ffffffff81c494f4 RDI: 0000000000000005 RBP: ffff888126dad080 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888100dfe040 R13: 0000000000000001 R14: 0000000000000000 R15: ffff888100dfbdd8 FS: 00007f7850a2c800(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32d26000 CR3: 000000012fdd8006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __tcp_close+0x5b2/0x620 net/ipv4/tcp.c:2875 __mptcp_close_ssk+0x145/0x3d0 net/mptcp/protocol.c:2427 mptcp_destroy_common+0x8a/0x1c0 net/mptcp/protocol.c:3277 mptcp_destroy+0x41/0x60 net/mptcp/protocol.c:3304 __mptcp_destroy_sock+0x56/0x140 net/mptcp/protocol.c:2965 __mptcp_close+0x38f/0x4a0 net/mptcp/protocol.c:3057 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x53/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x4e/0xf0 net/socket.c:651 sock_close+0x15/0x20 net/socket.c:1393 __fput+0xff/0x420 fs/file_table.c:321 task_work_run+0x8b/0xe0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f7850af70dc RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7850af70dc RDX: 00007f7850a2c800 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 00000000006bd980 R08: 0000000000000000 R09: 00000000000018a0 R10: 00000000316338a4 R11: 0000000000000293 R12: 0000000000211e31 R13: 00000000006bc05c R14: 00007f785062c000 R15: 0000000000211af0 Fixes: 0a3f4f1f ("mptcp: fix UaF in listener shutdown") Cc: stable@vger.kernel.org Reported-by:
-
Alexander Aring authored
This patch fixes a missing 8 byte for the header size calculation. The ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which points to skb_transport_header(). Currently we only check on the calculated addresses fields using CmprI and CmprE fields, see: https://www.rfc-editor.org/rfc/rfc6554#section-3 there is however a missing 8 byte inside the calculation which stands for the fields before the addresses field. Those 8 bytes are represented by sizeof(struct ipv6_rpl_sr_hdr) expression. Fixes: 8610c7c6 ("net: ipv6: add support for rpl sr exthdr") Signed-off-by:
Alexander Aring <aahringo@redhat.com> Reported-by:
maxpl0it <maxpl0it@protonmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Seiji Nishikawa authored
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in NULL pointer dereference. To fix this bug, check not only that rxDataRingUsed is true but also that adapter->rxdataring_enabled is true before calling memcpy() in vmxnet3_rq_rx_complete(). [1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 ... [1728352.478009] Call Trace: [1728352.478028] dump_stack+0x41/0x60 [1728352.478035] warn_alloc.cold.120+0x7b/0x11b [1728352.478038] ? _cond_resched+0x15/0x30 [1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170 [1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10 [1728352.478047] __alloc_pages_nodemask+0x2e2/0x320 [1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120 [1728352.478053] dma_direct_alloc+0x5a/0x2a0 [1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3] ... [1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled ... [1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 ... [1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130 ... [1728352.515655] Call Trace: [1728352.515665] <IRQ> [1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3] [1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3] ... Signed-off-by:
Seiji Nishikawa <snishika@redhat.com> Signed-off-by:
-
Ido Schimmel authored
When a net device is put administratively up, its 'IFF_UP' flag is set (if not set already) and a 'NETDEV_UP' notification is emitted, which causes the 8021q driver to add VLAN ID 0 on the device. The reverse happens when a net device is put administratively down. When changing the type of a bond to Ethernet, its 'IFF_UP' flag is incorrectly cleared, resulting in the kernel skipping the above process and VLAN ID 0 being leaked [1]. Fix by restoring the flag when changing the type to Ethernet, in a similar fashion to the restoration of the 'IFF_SLAVE' flag. The issue can be reproduced using the script in [2], with example out before and after the fix in [3]. [1] unreferenced object 0xffff888103479900 (size 256): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): 00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff8406426c>] vlan_vid_add+0x30c/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 unreferenced object 0xffff88810f6a83e0 (size 32): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G..... 81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff84064369>] vlan_vid_add+0x409/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 [2] ip link add name t-nlmon type nlmon ip link add name t-dummy type dummy ip link add name t-bond type bond mode active-backup ip link set dev t-bond up ip link set dev t-nlmon master t-bond ip link set dev t-nlmon nomaster ip link show dev t-bond ip link set dev t-dummy master t-bond ip link show dev t-bond ip link del dev t-bond ip link del dev t-dummy ip link del dev t-nlmon [3] Before: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff After: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff Fixes: e36b9d16 ("bonding: clean muticast addresses when device changes type") Fixes: 75c78500 ("bonding: remap muticast addresses without using dev_close() and dev_open()") Fixes: 9ec7eb60 ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change") Reported-by:Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/Tested-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Unbreak br_netfilter physdev match support, from Florian Westphal. 2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian. 3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal. 4) Fix validation of catch-all set element. 5) Tighten requirements for catch-all set elements. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements netfilter: nf_tables: validate catch-all set elements netfilter: nf_tables: fix ifdef to also consider nf_tables=m netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT netfilter: br_netfilter: fix recent physdev match breakage ==================== Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 18 Apr, 2023 8 commits
-
-
Nikita Zhandarovich authored
Function mlxfw_mfa2_tlv_multi_get() returns NULL if 'tlv' in question does not pass checks in mlxfw_mfa2_tlv_payload_get(). This behaviour may lead to NULL pointer dereference in 'multi->total_len'. Fix this issue by testing mlxfw_mfa2_tlv_multi_get()'s return value against NULL. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 410ed13c ("Add the mlxfw module for Mellanox firmware flash process") Co-developed-by:
Natalia Petrova <n.petrova@fintech.ru> Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by:
-
Paolo Abeni authored
Michael Chan says: ==================== bnxt_en: Bug fixes This small series contains 2 fixes. The first one fixes the PTP initialization logic on older chips to avoid logging a warning. The second one fixes a potenial NULL pointer dereference in the driver's aux bus unload path. ==================== Link: https://lore.kernel.org/r/20230417065819.122055-1-michael.chan@broadcom.comSigned-off-by:
-
Kalesh AP authored
In the driver unload path, the driver currently checks the valid BNXT_FLAG_ROCE_CAP flag in bnxt_rdma_aux_device_uninit() before proceeding. This is flawed because the flag may not be set initially during driver load. It may be set later after the NVRAM setting is changed followed by a firmware reset. Relying on the BNXT_FLAG_ROCE_CAP flag may crash in bnxt_rdma_aux_device_uninit() if the aux device was never initialized: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 8ae6aa067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 39 PID: 42558 Comm: rmmod Kdump: loaded Tainted: G OE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R750/0WT8Y6, BIOS 1.5.4 12/17/2021 RIP: 0010:device_del+0x1b/0x410 Code: 89 a5 50 03 00 00 4c 89 a5 58 03 00 00 eb 89 0f 1f 44 00 00 41 56 41 55 41 54 4c 8d a7 80 00 00 00 55 53 48 89 fb 48 83 ec 18 <48> 8b 2f 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 RSP: 0018:ff7f82bf469a7dc8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000206 RDI: 0000000000000000 RBP: ff31b7cd114b0ac0 R08: 0000000000000000 R09: ffffffff935c3400 R10: ff31b7cd45bc3440 R11: 0000000000000001 R12: 0000000000000080 R13: ffffffffc1069f40 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fc9903ce740(0000) GS:ff31b7d4ffac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000992fee004 CR4: 0000000000773ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: bnxt_rdma_aux_device_uninit+0x1f/0x30 [bnxt_en] bnxt_remove_one+0x2f/0x1f0 [bnxt_en] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x103/0x1f0 driver_detach+0x54/0x88 bus_remove_driver+0x77/0xc9 pci_unregister_driver+0x2d/0xb0 bnxt_exit+0x16/0x2c [bnxt_en] __x64_sys_delete_module+0x139/0x280 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7fc98f3af71b Fix this by modifying the check inside bnxt_rdma_aux_device_uninit() to check for bp->aux_priv instead. We also need to make some changes in bnxt_rdma_aux_device_init() to make sure that bp->aux_priv is set only when the aux device is fully initialized. Fixes: d80d88b0 ("bnxt_en: Add auxiliary driver support") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
The driver does not support PTP on these older chips and it is assuming that firmware on these older chips will not return the PORT_MAC_PTP_QCFG_RESP_FLAGS_HWRM_ACCESS flag in __bnxt_hwrm_ptp_qcfg(), causing the function to abort quietly. But newer firmware now sets this flag and so __bnxt_hwrm_ptp_qcfg() will proceed further. Eventually it will fail in bnxt_ptp_init() -> bnxt_map_ptp_regs() because there is no code to support the older chips. The driver will then complain: "PTP initialization failed.\n" Fix it so that we abort quietly earlier without going through the unnecessary steps and alarming the user with the warning log. Fixes: ae5c42f0 ("bnxt_en: Get PTP hardware capability from firmware") Signed-off-by:
-
Pablo Neira Ayuso authored
If NFT_SET_ELEM_CATCHALL is set on, then userspace provides no set element key. Otherwise, bail out with -EINVAL. Fixes: aaa31047 ("netfilter: nftables: add catch-all set element support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Duoming Zhou authored
The flower_stats_timer can schedule flower_stats_work and flower_stats_work can also arm the flower_stats_timer. The process is shown below: ----------- timer schedules work ------------ ch_flower_stats_cb() //timer handler schedule_work(&adap->flower_stats_work); ----------- work arms timer ------------ ch_flower_stats_handler() //workqueue callback function mod_timer(&adap->flower_stats_timer, ...); When the cxgb4 device is detaching, the timer and workqueue could still be rearmed. The process is shown below: (cleanup routine) | (timer and workqueue routine) remove_one() | free_some_resources() | ch_flower_stats_cb() //timer cxgb4_cleanup_tc_flower() | schedule_work() del_timer_sync() | | ch_flower_stats_handler() //workqueue | mod_timer() cancel_work_sync() | kfree(adapter) //FREE | ch_flower_stats_cb() //timer | adap->flower_stats_work //USE This patch changes del_timer_sync() to timer_shutdown_sync(), which could prevent rearming of the timer from the workqueue. Fixes: e0f911c8 ("cxgb4: fetch stats for offloaded tc flower flows") Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20230415081227.7463-1-duoming@zju.edu.cnSigned-off-by:
-
Pablo Neira Ayuso authored
catch-all set element might jump/goto to chain that uses expressions that require validation. Fixes: aaa31047 ("netfilter: nftables: add catch-all set element support") Signed-off-by:
-
Jacob Keller authored
Commit e523af4e ("net/ice: Add support for enable_iwarp and enable_roce devlink param") added support for the enable_roce and enable_iwarp parameters in the ice driver. It didn't document these parameters in the ice devlink documentation file. Add this documentation, including a note about the mutual exclusion between the two modes. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Acked-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.comSigned-off-by:
-
- 17 Apr, 2023 4 commits
-
-
Florian Westphal authored
nftables can be built as a module, so fix the preprocessor conditional accordingly. Fixes: 478b360a ("netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n") Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pedro Tammela authored
Palash reports a UAF when using a modified version of syzkaller[1]. When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()' a call to 'tcf_exts_destroy()' is made to free up the tcf_exts resources. In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made; Then calling 'tcf_exts_destroy()', which triggers an UAF since the already freed tcf_exts action pointer is lingering in the struct. Before the offending patch, this was not an issue since there was no case where the tcf_exts action pointer could linger. Therefore, restore the old semantic by clearing the action pointer in case of a failure to initialize the miss_cookie. [1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus v1->v2: Fix compilation on configs without tc actions (kernel test robot) Fixes: 80cd22c3 ("net/sched: cls_api: Support hardware miss to tc action") Reported-by:
Palash Oswal <oswalpalash@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
-
Ding Hui authored
There is a use-after-free scenario that is: When the NIC is down, user set mac address or vlan tag to VF, the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop() and efx_net_open(), since netif_running() is false, the port will not start and keep port_enabled false, but selftest_work is scheduled in efx_net_open(). If we remove the device before selftest_work run, the efx_stop_port() will not be called since the NIC is down, and then efx is freed, we will soon get a UAF in run_timer_softirq() like this: [ 1178.907941] ================================================================== [ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90 [ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0 [ 1178.907950] [ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022 [ 1178.907955] Call Trace: [ 1178.907956] <IRQ> [ 1178.907960] dump_stack+0x71/0xab [ 1178.907963] print_address_description+0x6b/0x290 [ 1178.907965] ? run_timer_softirq+0xdea/0xe90 [ 1178.907967] kasan_report+0x14a/0x2b0 [ 1178.907968] run_timer_softirq+0xdea/0xe90 [ 1178.907971] ? init_timer_key+0x170/0x170 [ 1178.907973] ? hrtimer_cancel+0x20/0x20 [ 1178.907976] ? sched_clock+0x5/0x10 [ 1178.907978] ? sched_clock_cpu+0x18/0x170 [ 1178.907981] __do_softirq+0x1c8/0x5fa [ 1178.907985] irq_exit+0x213/0x240 [ 1178.907987] smp_apic_timer_interrupt+0xd0/0x330 [ 1178.907989] apic_timer_interrupt+0xf/0x20 [ 1178.907990] </IRQ> [ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370 If the NIC is not actually brought up, there is no need to schedule selftest_work, so let's move invoking efx_selftest_async_start() into efx_start_all(), and it will be canceled by broughting down. Fixes: dd40781e ("sfc: Run event/IRQ self-test asynchronously when interface is brought up") Fixes: e340be92 ("sfc: add ndo_set_vf_mac() function for EF10") Debugged-by:
Huang Cun <huangcun@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Suggested-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
Ding Hui <dinghui@sangfor.com.cn> Signed-off-by:
-
Xuan Zhuo authored
Here we copy the data from the original buf to the new page. But we not check that it may be overflow. As long as the size received(including vnethdr) is greater than 3840 (PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow. And this is completely possible, as long as the MTU is large, such as 4096. In our test environment, this will cause crash. Since crash is caused by the written memory, it is meaningless, so I do not include it. Fixes: 72979a6c ("virtio_net: xdp, add slowpath case for non contiguous buffers") Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
- 14 Apr, 2023 1 commit
-
-
Gwangun Jung authored
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device. The MTU of the loopback device can be set up to 2^31-1. As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX. Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors. The following reports a oob access: [ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313) [ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301 [ 84.583686] [ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1 [ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 84.584644] Call Trace: [ 84.584787] <TASK> [ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) [ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) [ 84.585570] kasan_report (mm/kasan/report.c:538) [ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313) [ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255) [ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776) [ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212) [ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228) [ 84.589460] ip_output (net/ipv4/ip_output.c:430) [ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606) [ 84.590285] raw_sendmsg (net/ipv4/raw.c:649) [ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747) [ 84.592084] __sys_sendto (net/socket.c:2142) [ 84.593306] __x64_sys_sendto (net/socket.c:2150) [ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [ 84.594070] RIP: 0033:0x7fe568032066 [ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c Code starting with the faulting instruction =========================================== [ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066 [ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003 [ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010 [ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001 [ 84.596218] </TASK> [ 84.596295] [ 84.596351] Allocated by task 291: [ 84.596467] kasan_save_stack (mm/kasan/common.c:46) [ 84.596597] kasan_set_track (mm/kasan/common.c:52) [ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384) [ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974) [ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938) [ 84.597100] qdisc_create (net/sched/sch_api.c:1244) [ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680) [ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174) [ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574) [ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365) [ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942) [ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747) [ 84.598016] ____sys_sendmsg (net/socket.c:2501) [ 84.598147] ___sys_sendmsg (net/socket.c:2557) [ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586) [ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [ 84.598688] [ 84.598744] The buggy address belongs to the object at ffff88810f674000 [ 84.598744] which belongs to the cache kmalloc-8k of size 8192 [ 84.599135] The buggy address is located 2664 bytes to the right of [ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0) [ 84.599544] [ 84.599598] The buggy address belongs to the physical page: [ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670 [ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000 [ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000 [ 84.601009] page dumped because: kasan: bad access detected [ 84.601187] [ 84.601241] Memory state around the buggy address: [ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602069] ^ [ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602693] ================================================================== [ 84.602924] Disabling lock debugging due to kernel taint Fixes: 3015f3d2 ("pkt_sched: enable QFQ to support TSO/GSO") Reported-by:
Gwangun Jung <exsociety@gmail.com> Signed-off-by:
-
- 13 Apr, 2023 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, and bluetooth. Not all that quiet given spring celebrations, but "current" fixes are thinning out, which is encouraging. One outstanding regression in the mlx5 driver when using old FW, not blocking but we're pushing for a fix. Current release - new code bugs: - eth: enetc: workaround for unresponsive pMAC after receiving express traffic Previous releases - regressions: - rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the pid/seq fields 0 for backward compatibility Previous releases - always broken: - sctp: fix a potential overflow in sctp_ifwdtsn_skip - mptcp: - use mptcp_schedule_work instead of open-coding it and make the worker check stricter, to avoid scheduling work on closed sockets - fix NULL pointer dereference on fastopen early fallback - skbuff: fix memory corruption due to a race between skb coalescing and releasing clones confusing page_pool reference counting - bonding: fix neighbor solicitation validation on backup slaves - bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp - bpf: arm64: fixed a BTI error on returning to patched function - openvswitch: fix race on port output leading to inf loop - sfp: initialize sfp->i2c_block_size at sfp allocation to avoid returning a different errno than expected - phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove - Bluetooth: fix printing errors if LE Connection times out - Bluetooth: assorted UaF, deadlock and data race fixes - eth: macb: fix memory corruption in extended buffer descriptor mode Misc: - adjust the XDP Rx flow hash API to also include the protocol layers over which the hash was computed" * tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type veth: bpf_xdp_metadata_rx_hash add xdp rss hash type mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type xdp: rss hash types representation selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters skbuff: Fix a race between coalescing and releasing SKBs net: macb: fix a memory corruption in extended buffer descriptor mode selftests: add the missing CONFIG_IP_SCTP in net config udp6: fix potential access to stale information selftests: openvswitch: adjust datapath NL message declaration selftests: mptcp: userspace pm: uniform verify events mptcp: fix NULL pointer dereference on fastopen early fallback mptcp: stricter state check in mptcp_worker mptcp: use mptcp_schedule_work instead of open-coding it net: enetc: workaround for unresponsive pMAC after receiving express traffic sctp: fix a potential overflow in sctp_ifwdtsn_skip net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume() rtnetlink: Restore RTM_NEW/DELLINK notification behavior net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes ... -
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Fix interaction between fw_devlink and DT overlays causing devices to not be probed - Fix the compatible string for loongson,cpu-interrupt-controller * tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: treewide: Fix probing of devices in DT overlays dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fix from Linus Walleij: "This is just a revert of the AMD fix, because the fix broke some laptops. We are working on a proper solution" * tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "pinctrl: amd: Disable and mask interrupts on resume"
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: - two fbcon regressions - amdgpu: dp mst, smu13 - i915: dual link dsi for tgl+ - armada, nouveau, drm/sched, fbmem * tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm: fbcon: set_con2fb_map needs to set con2fb_map! fbcon: Fix error paths in set_con2fb_map drm/amd/pm: correct the pcie link state check for SMU13 drm/amd/pm: correct SMU13.0.7 max shader clock reporting drm/amd/pm: correct SMU13.0.7 pstate profiling clock settings drm/amd/display: Pass the right info to drm_dp_remove_payload drm/armada: Fix a potential double free in an error handling path fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace drm/nouveau/fb: add missing sysmen flush callbacks drm/i915/dsi: fix DSS CTL register offsets for TGL+ drm/scheduler: Fix UAF race in drm_sched_entity_push_job()
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-04-13 We've added 6 non-merge commits during the last 1 day(s) which contain a total of 14 files changed, 205 insertions(+), 38 deletions(-). The main changes are: 1) One late straggler fix on the XDP hints side which fixes bpf_xdp_metadata_rx_hash kfunc API before the release goes out in order to provide information on the RSS hash type, from Jesper Dangaard Brouer. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type veth: bpf_xdp_metadata_rx_hash add xdp rss hash type mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type xdp: rss hash types representation selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters ==================== Link: https://lore.kernel.org/r/20230413192939.10202-1-daniel@iogearbox.netSigned-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
Short summary of fixes pull: * armada: Fix double free * fb: Clear FB_ACTIVATE_KD_TEXT in ioctl * nouveau: Add missing callbacks * scheduler: Fix use-after-free error Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230413184233.GA8148@linux-uq9g
-
Alexei Starovoitov authored
Jesper Dangaard Brouer says: ==================== Current API for bpf_xdp_metadata_rx_hash() returns the raw RSS hash value, but doesn't provide information on the RSS hash type (part of 6.3-rc). This patchset proposal is to change the function call signature via adding a pointer value argument for providing the RSS hash type. Patchset also removes all bpf_printk's from xdp_hw_metadata program that we expect driver developers to use. Instead counters are introduced for relaying e.g. skip and fail info. ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
Update BPF selftests to use the new RSS type argument for kfunc bpf_xdp_metadata_rx_hash. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132894068.340624.8914711185697163690.stgit@firesoulSigned-off-by:
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type via matching individual Completion Queue Entry (CQE) status bits. Fixes: ab46182d ("net/mlx4_en: Support RX XDP metadata") Signed-off-by:
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type. The veth driver currently only support XDP-hints based on SKB code path. The SKB have lost information about the RSS hash type, by compressing the information down to a single bitfield skb->l4_hash, that only knows if this was a L4 hash value. In preparation for veth, the xdp_rss_hash_type have an L4 indication bit that allow us to return a meaningful L4 indication when working with SKB based packets. Fixes: 306531f0 ("veth: Support RX XDP metadata") Signed-off-by:
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type via mapping table. The mlx5 hardware can also identify and RSS hash IPSEC. This indicate hash includes SPI (Security Parameters Index) as part of IPSEC hash. Extend xdp core enum xdp_rss_hash_type with IPSEC hash type. Fixes: bc8d405b ("net/mlx5e: Support RX XDP metadata") Signed-off-by:
-
Jesper Dangaard Brouer authored
The RSS hash type specifies what portion of packet data NIC hardware used when calculating RSS hash value. The RSS types are focused on Internet traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4 primarily TCP vs UDP, but some hardware supports SCTP. Hardware RSS types are differently encoded for each hardware NIC. Most hardware represent RSS hash type as a number. Determining L3 vs L4 often requires a mapping table as there often isn't a pattern or sorting according to ISO layer. The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that contains both BITs for the L3/L4 types, and combinations to be used by drivers for their mapping tables. The enum xdp_rss_type_bits get exposed to BPF via BTF, and it is up to the BPF-programmer to match using these defines. This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding a pointer value argument for provide the RSS hash type. Change signature for all xmo_rx_hash calls in drivers to make it compile. The RSS type implementations for each driver comes as separate patches. Fixes: 3d76a4d3 ("bpf: XDP metadata RX kfuncs") Signed-off-by:
-
Jesper Dangaard Brouer authored
The tool xdp_hw_metadata can be used by driver developers implementing XDP-hints metadata kfuncs. Remove all bpf_printk calls, as the tool already transfers all the XDP-hints related information via metadata area to AF_XDP userspace process. Add counters for providing remaining information about failure and skipped packet events. Signed-off-by:
-
Daniel Vetter authored
I got really badly confused in d443d938 ("fbcon: move more common code into fb_open()") because we set the con2fb_map before the failure points, which didn't look good. But in trying to fix that I moved the assignment into the wrong path - we need to do it for _all_ vc we take over, not just the first one (which additionally requires the call to con2fb_acquire_newinfo). I've figured this out because of a KASAN bug report, where the fbcon_registered_fb and fbcon_display arrays went out of sync in fbcon_mode_deleted() because the con2fb_map pointed at the old fb_info, but the modes and everything was updated for the new one. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Helge Deller <deller@gmx.de> Tested-by:
Xingyuan Mo <hdthky0@gmail.com> Fixes: d443d938 ("fbcon: move more common code into fb_open()") Reported-by:
-
Daniel Vetter authored
This is a regressoin introduced in b07db395 ("fbcon: Ditch error handling for con2fb_release_oldinfo"). I failed to realize what the if (!err) checks. The mentioned commit was dropping the con2fb_release_oldinfo() return value but the if (!err) was also checking whether the con2fb_acquire_newinfo() function call above failed or not. Fix this with an early return statement. Note that there's still a difference compared to the orginal state of the code, the below lines are now also skipped on error: if (!search_fb_in_map(info_idx)) info_idx = newidx; These are only needed when we've actually thrown out an old fb_info from the console mappings, which only happens later on. Also move the fbcon_add_cursor_work() call into the same if block, it's all protected by console_lock so doesn't matter when we set up the blinking cursor delayed work anyway. This further simplifies the control flow and allows us to ditch the found local variable. v2: Clarify commit message (Javier) Signed-off-by:
-
Liang Chen authored
Commit 1effe8ca ("skbuff: fix coalescing for page_pool fragment recycling") allowed coalescing to proceed with non page pool page and page pool page when @from is cloned, i.e. to->pp_recycle --> false from->pp_recycle --> true skb_cloned(from) --> true However, it actually requires skb_cloned(@from) to hold true until coalescing finishes in this situation. If the other cloned SKB is released while the merging is in process, from_shinfo->nr_frags will be set to 0 toward the end of the function, causing the increment of frag page _refcount to be unexpectedly skipped resulting in inconsistent reference counts. Later when SKB(@to) is released, it frees the page directly even though the page pool page is still in use, leading to use-after-free or double-free errors. So it should be prohibited. The double-free error message below prompted us to investigate: BUG: Bad page state in process swapper/1 pfn:0e0d1 page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x2 pfn:0xe0d1 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000 raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 6.2.0+ Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_pcp_prepare+0x260/0x2f0 free_unref_page+0x20/0x1c0 skb_release_data+0x10b/0x1a0 napi_consume_skb+0x56/0x150 net_rx_action+0xf0/0x350 ? __napi_schedule+0x79/0x90 __do_softirq+0xc8/0x2b1 __irq_exit_rcu+0xb9/0xf0 common_interrupt+0x82/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0xb/0x20 Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool") Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.comSigned-off-by:
-
Roman Gushchin authored
For quite some time we were chasing a bug which looked like a sudden permanent failure of networking and mmc on some of our devices. The bug was very sensitive to any software changes and even more to any kernel debug options. Finally we got a setup where the problem was reproducible with CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma: [ 16.992082] ------------[ cut here ]------------ [ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes] [ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900 [ 17.018977] Modules linked in: xxxxx [ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28 [ 17.045345] Hardware name: xxxxx [ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO) [ 17.054322] pc : check_unmap+0x6a0/0x900 [ 17.058243] lr : check_unmap+0x6a0/0x900 [ 17.062163] sp : ffffffc010003c40 [ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c [ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800 [ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8 [ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750 [ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000 [ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010 [ 17.097343] x17: 0000000000000000 x16: 0000000000000000 [ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720 [ 17.107959] x13: 0720072007200720 x12: 0720072007200720 [ 17.113261] x11: 0720072007200720 x10: 0720072007200720 [ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d [ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098 [ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370 [ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000 [ 17.145082] Call trace: [ 17.147524] check_unmap+0x6a0/0x900 [ 17.151091] debug_dma_unmap_page+0x88/0x90 [ 17.155266] gem_rx+0x114/0x2f0 [ 17.158396] macb_poll+0x58/0x100 [ 17.161705] net_rx_action+0x118/0x400 [ 17.165445] __do_softirq+0x138/0x36c [ 17.169100] irq_exit+0x98/0xc0 [ 17.172234] __handle_domain_irq+0x64/0xc0 [ 17.176320] gic_handle_irq+0x5c/0xc0 [ 17.179974] el1_irq+0xb8/0x140 [ 17.183109] xiic_process+0x5c/0xe30 [ 17.186677] irq_thread_fn+0x28/0x90 [ 17.190244] irq_thread+0x208/0x2a0 [ 17.193724] kthread+0x130/0x140 [ 17.196945] ret_from_fork+0x10/0x20 [ 17.200510] ---[ end trace 7240980785f81d6f ]--- [ 237.021490] ------------[ cut here ]------------ [ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b [ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240 [ 237.041802] Modules linked in: xxxxx [ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28 [ 237.068941] Hardware name: xxxxx [ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 237.077900] pc : add_dma_entry+0x214/0x240 [ 237.081986] lr : add_dma_entry+0x214/0x240 [ 237.086072] sp : ffffffc010003c30 [ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00 [ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0 [ 237.099987] x25: 0000000000000002 x24: 0000000000000000 [ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00 [ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600 [ 237.115897] x19: 00000000ffffffef x18: 0000000000000010 [ 237.121201] x17: 0000000000000000 x16: 0000000000000000 [ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720 [ 237.131807] x13: 0720072007200720 x12: 0720072007200720 [ 237.137111] x11: 0720072007200720 x10: 0720072007200720 [ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259 [ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000 [ 237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001 [ 237.158325] x3 : 0000000000000006 x2 : 0000000000000007 [ 237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000 [ 237.168932] Call trace: [ 237.171373] add_dma_entry+0x214/0x240 [ 237.175115] debug_dma_map_page+0xf8/0x120 [ 237.179203] gem_rx_refill+0x190/0x280 [ 237.182942] gem_rx+0x224/0x2f0 [ 237.186075] macb_poll+0x58/0x100 [ 237.189384] net_rx_action+0x118/0x400 [ 237.193125] __do_softirq+0x138/0x36c [ 237.196780] irq_exit+0x98/0xc0 [ 237.199914] __handle_domain_irq+0x64/0xc0 [ 237.204000] gic_handle_irq+0x5c/0xc0 [ 237.207654] el1_irq+0xb8/0x140 [ 237.210789] arch_cpu_idle+0x40/0x200 [ 237.214444] default_idle_call+0x18/0x30 [ 237.218359] do_idle+0x200/0x280 [ 237.221578] cpu_startup_entry+0x20/0x30 [ 237.225493] rest_init+0xe4/0xf0 [ 237.228713] arch_call_rest_init+0xc/0x14 [ 237.232714] start_kernel+0x47c/0x4a8 [ 237.236367] ---[ end trace 7240980785f81d70 ]--- Lars was fast to find an explanation: according to the datasheet bit 2 of the rx buffer descriptor entry has a different meaning in the extended mode: Address [2] of beginning of buffer, or in extended buffer descriptor mode (DMA configuration register [28] = 1), indicates a valid timestamp in the buffer descriptor entry. The macb driver didn't mask this bit while getting an address and it eventually caused a memory corruption and a dma failure. The problem is resolved by explicitly clearing the problematic bit if hw timestamping is used. Fixes: 7b429614 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by:
Roman Gushchin <roman.gushchin@linux.dev> Co-developed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
-
Xin Long authored
The selftest sctp_vrf needs CONFIG_IP_SCTP set in config when building the kernel, so add it. Fixes: a61bd7b9 ("selftests: add a selftest for sctp vrf") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.comSigned-off-by:
-
Eric Dumazet authored
lena wang reported an issue caused by udpv6_sendmsg() mangling msg->msg_name and msg->msg_namelen, which are later read from ____sys_sendmsg() : /* * If this is sendmmsg() and sending to current destination address was * successful, remember it. */ if (used_address && err >= 0) { used_address->name_len = msg_sys->msg_namelen; if (msg_sys->msg_name) memcpy(&used_address->name, msg_sys->msg_name, used_address->name_len); } udpv6_sendmsg() wants to pretend the remote address family is AF_INET in order to call udp_sendmsg(). A fix would be to modify the address in-place, instead of using a local variable, but this could have other side effects. Instead, restore initial values before we return from udpv6_sendmsg(). Fixes: c71d8ebe ("net: Fix security_socket_sendmsg() bypass problem.") Reported-by:lena wang <lena.wang@mediatek.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.comSigned-off-by:
-
Aaron Conole authored
The netlink message for creating a new datapath takes an array of ports for the PID creation. This shouldn't cause much issue but correct it for future cases where we need to do decode of datapath information that could include the per-cpu PID map. Fixes: 25f16c87 ("selftests: add openvswitch selftest suite") Signed-off-by:
Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: more fixes for 6.3 Patch 1 avoids scheduling the MPTCP worker on a closed socket on some edge cases. It fixes issues that can be visible from v5.11. Patch 2 makes sure the MPTCP worker doesn't try to manipulate disconnected sockets. This is also a fix for an issue that can be visible from v5.11. Patch 3 fixes a NULL pointer dereference when MPTCP FastOpen is used and an early fallback is done. A fix for v6.2. Patch 4 improves the stability of the userspace PM selftest for a subtest added in v6.2. ==================== Link: https://lore.kernel.org/r/20230411-upstream-net-20230411-mptcp-fixes-v1-0-ca540f3ef986@tessares.netSigned-off-by:
-
