- 10 Aug, 2022 32 commits
-
-
Duncan Ma authored
[Why] An issue during VPG indexing offset generation causing to use the incorrect VPG. HW team placed VPG instances 5 at end of list, making it VPG 9 in register headers. [How] Correct VPG instance for HPO encoders. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Duncan Ma <duncan.ma@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
David Galiffi authored
Fixed bracketing around condition statement. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
David Galiffi <David.Galiffi@amd.com> Tested-by:
-
David Galiffi authored
[Why] Driver is restricting voltage levels if system cannot switch in vblank. [How] Change allow_for_pstate_or_stutter_in_vblank_final from dm_prefetch_support_uclk_fclk_and_stutter to dm_prefetch_support_uclk_fclk_and_stutter_if_possible. Add support for a new registry property, DalDMLDisallowAlternatePrefetchModes, for easier debugging. Reviewed-by:
-
Leo Ma authored
[Why] Reported from customer the checksum in AMD VSIF V3 is incorrect and causing blank screen issue. [How] Fix the packet length issue on AMD HDMI VSIF V3. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Leo Ma <hanghong.ma@amd.com> Tested-by:
-
Josip Pavic authored
[Why] In some cases MPC tree bottom pipe ends up point to itself. This causes iterating from top to bottom to hang the system in an infinite loop. [How] When looping to next MPC bottom pipe, check that the pointer is not same as current to avoid infinite loop. Reviewed-by:
Josip Pavic <Josip.Pavic@amd.com> Tested-by:
-
Chiawen Huang authored
[Why] Enabling stream with tg lock makes config settings pending causing the garbage until tg unlock. [How] Keep the original lock mechanism The driver doesn't lock tg if plane_state is null. Reviewed-by:
Chiawen Huang <chiawen.huang@amd.com> Tested-by:
-
Daniel Miess authored
[Why] DIG_FIFO_OUTPUT_PIXEL_MODE not being set for dcn314 resulting in incorrect timing for YCbCr4:2:0 [How] Copy the implementation of set_pixels_per_cycle from dcn32 over to dcn314 Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Daniel Miess <Daniel.Miess@amd.com> Tested-by:
-
Alvin Lee authored
[Description] Add a variable to update FCLK latency Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
Aurabindo Pillai authored
[Why & How] When multiple displays are used, the underlying framebuffers could be two separate framebuffers, or a single large framebuffer. Fix the calculation logic for CAB to account for large framebuffer. Current logic assumes that any FB that the plane points to are independent. When a single FB is used on the system, this does 2 times allocation. Add a check to prevent duplicate allocation by checking if the base addresses are the same, and then ensuring that the if we allocate using the pitch, whole of the other fbs will be accounted for in the first allocation. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Rodrigo Siqueira authored
At this point, we isolate the FPU code associated with DCN314 under the DML folder. This commit drops the FPU flags from the Makefile. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
-
Rodrigo Siqueira authored
The function responsible for populating DML pipes has some FPU operations, and for this reason, it must be moved to the dml folder. This commit moves such function from resource to the fpu file under the dml folder. Reviewed-by:
-
Rodrigo Siqueira authored
DCN314 has multiple references to FPU operations inside the resource files, and we need to move those codes to the DML folder. This commit creates the dcn314_fpu files and moves the bounding box operation to this file. Reviewed-by:
-
Daniel Miess authored
[Why] DP DSC YCbCr422 not working because dcn314_calculate_dccg_k1_k2_values does not account for two pixels per container [How] Replace the contents of dcn314_calculate_dccg_k1_k2_values with the code from the function dcn32_calculate_dccg_k1_k2_values Reviewed-by:
-
Tim Huang authored
The EnableGfxOff message is dropped from the new PMFW ppsmc interface. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
Tim Huang authored
Update the SmuMetrics_t defination and SMU driver interface version. Signed-off-by:
-
Tim Huang authored
Enable GFX CG gate/ungate control. Signed-off-by:
-
Tim Huang authored
Add below GFX Clock Gating supports: 1. GFX Coarse Grain Clock Gating(CGCG) 2. GFX Coarse grain light sleep/deep sleep(CGLS) 3. GFX Medium Grain Clock Gating(MGCG) 4. GFX Fine Grain Clock Gating(FGCG) 5. Repeater Fine Grain Clock Gating 6. Perfmon Clock Gating Signed-off-by:
-
Yifan Zhang authored
GC version is 11.0.1 rather than 11.0.2 Signed-off-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
Ma Jun authored
Remove redundant reference of header file dev_printk.h Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Lijo Lazar authored
A list of devices to be reset is already created in amdgpu_device_gpu_recover function. Creating another list with the same nodes is incorrect and not supported in list_head. Instead, pass the device list as part of reset context. Fixes: 9e085647 (drm/amdgpu: Refactor mode2 reset logic for v13.0.2) Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Magali Lemes authored
Add missing headers to solve the following warnings from sparse: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static? Fixes: 1a340825 ("drm/amd/display: move FPU code on dcn21 clk_mgr") Fixes: 5085e036 ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder") Fixes: 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Fixes: fa896297 ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder") Fixes: 3f8951cc ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder") Signed-off-by:
Magali Lemes <magalilemes00@gmail.com> Reviewed-by:
Maíra Canal <mairacanal@riseup.net> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Likun Gao authored
Update the vram width algorithm for vram_info v3_0 to align with the changes of latest IFWI. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Daniel Phillips authored
Separately accumulate a statistic of rounded up allocations to use to report availability, with a view to increasing the likelihood a buffer object can be successfully allocated at exactly the size reported by the availability API. Signed-off-by:
Daniel Phillips <daniel.phillips@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Daniel Phillips authored
Rounding up allocations in the allocation path caused test regressions, so now just round in the availability path. Signed-off-by:
-
Magali Lemes authored
Since "rn_clk_mgr.h" needs ‘struct clk_mgr_internal’ which is declared in "clk_mgr_internal.h", include "clk_mgr_internal.h" in "rn_clk_mgr.h" instead of in its source file. Because of the change above, change the order of '#include "rn_clk_mgr.h"', so that the necessary structs are visible to dcn20_clk_mgr.h. Signed-off-by:
-
Magali Lemes authored
As "dcn3_1_soc", "dcn3_15_soc", and "dcn3_16_soc" are not used outside of their corresponding "dcn3*_fpu.c", make them static and remove their extern declaration. Fixes: 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Fixes: fa896297 ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder") Fixes: 3f8951cc ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder") Signed-off-by:
-
Magali Lemes authored
There are two identical CFLAGS entries for "display_mode_vba_20.o", so remove one of them. Also, as there's already an entry for "display_mode_lib.o" CFLAGS, regardless of CONFIG_DRM_AMD_DC_DCN being defined or not, remove the one entry between CONFIG_DRM_AMD_DC_DCN ifdef guards. Signed-off-by:
André Almeida <andrealmeid@igalia.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
This reverts commit bac4b41d. This commit was a part of a patchset responsible for reducing the stack size. However, after some other changes, this commit becomes unnecessary, so we are reverting it here. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Rodrigo Siqueira authored
This reverts commit c3b3f9ba. This commit was a part of a patchset responsible for reducing the stack size. However, after some other changes, this commit becomes unnecessary, so we are reverting it here. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by:
-
Rodrigo Siqueira authored
Revert "drm/amd/display: reduce stack for dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport" This reverts commit 3c3abac6. This commit was a part of a patchset responsible for reducing the stack size. However, after some other changes, this commit becomes unnecessary, so we are reverting it here. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by:
-
Rodrigo Siqueira authored
This reverts commit 86e4863e. This commit was a part of a patchset responsible for reducing the stack size. However, after some other changes, this commit becomes unnecessary, so we are reverting it here. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by:
-
Aurabindo Pillai authored
[Why&How] Add the missing definition to set the register field HBLANK_MINIMUM_SYMBOL_WIDTH Signed-off-by:
-
- 03 Aug, 2022 1 commit
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.20-2022-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.20-2022-07-29: amdgpu: - Misc spelling and grammar fixes - DC whitespace cleanups - ACP smatch fix - GFX 11.0 updates - PSP 13.0 updates - VCN 4.0 updates - DC FP fix for PPC64 - Misc bug fixes amdkfd: - SVM fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220729202742.6636-1-alexander.deucher@amd.com
-
- 29 Jul, 2022 7 commits
-
-
Rodrigo Siqueira authored
We got a report from Stephen/Michael that the PowerPC build was failing with the following error: ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o This error happened because of the function optc3_set_vrr_m_const. This function expects a double as a parameter in a code that is not allowed to have FPU operations. After further investigation, it became clear that optc3_set_vrr_m_const was never invoked, so we can safely drop this function and fix the ld issue. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Melissa Wen <mwen@igalia.com> Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Tested-by:
-
Xiaojian Du authored
This patch will enable support for psp 13.0.4 blcok. Signed-off-by:
Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by:
-
Xiaojian Du authored
This patch will add files for PSP 13.0.4. Signed-off-by:
-
Xiaojian Du authored
This patch will add header files for MP 13.0.4. Signed-off-by:
-
Yifan Zhang authored
This patch corrects RLC_RLCS_BOOTLOAD_STATUS offset and index for GC 11.0.1. Signed-off-by:
-
Xiaojian Du authored
This patch will make SMU send msg to IMU for the front-door loading, it is required by some ASICs. Signed-off-by:
-
Yu Zhe authored
time_is_before_jiffies deals with timer wrapping correctly. Signed-off-by:
Yu Zhe <yuzhe@nfschina.com> Signed-off-by:
-
