We normally expect vdpa to use the modern interface.
However for consistency, let's use same APIs as vhost
for legacy guests.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

For new helpers handling legacy features to be effective,
vhost needs to invoke them. Tie them in.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Some legacy guests just assume features are 0 after reset.
We detect that config space is accessed before features are
set and set features to 0 automatically.
Note: some legacy guests might not even access config space, if this is
reported in the field we might need to catch a kick to handle these.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

mlxbf-tmfifo accesses config space using native types -
which works for it since the legacy virtio native types.

This will break if it ever needs to support modern virtio,
so with new tags previously introduced for virtio net config,
sparse now warns for this in drivers.

Since this is a legacy only device, fix it up using
virtio_legacy_is_little_endian for now.

No functional changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>

Transitional devices should all use __virtioXX types (and __leXX for
fields not present in legacy devices).
Modern ones should use __leXX.
_uXX type would be a bug.
Let's prevent that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Tag config space fields as having virtio endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Since this is a modern-only device,
tag config space fields as having little endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Tag config space fields as having virtio endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Since this is a modern-only device,
tag config space fields as having little endian-ness.

TODO: check other uses of __virtioXX types in this header,
should probably be __leXX.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Since this is a modern-only device,
tag config space fields as having little endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Since this is a modern-only device,
tag config space fields as having little endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Since gpu is a modern-only device,
tag config space fields as having little endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Since fs is a modern-only device,
tag config space fields as having little endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Since crypto is a modern-only device,
tag config space fields as having little endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Tag config space fields as having virtio endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Tag config space fields as having virtio endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

Tag config space fields as having little endian-ness.
Note that balloon is special: LE even when using
the legacy interface.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Tag config space fields as having virtio endian-ness.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Currently all config space fields are of the type __uXX.
This confuses people and some drivers (notably vdpa)
access them using CPU endian-ness - which only
works well for legacy or LE platforms.

Update virtio_cread/virtio_cwrite macros to allow __virtioXX
and __leXX field types. Follow-up patches will convert
config space to use these types.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>

virtio_store_mb was built with split ring in mind so it accepts
__virtio16 arguments. Packed ring uses __le16 values, so sparse
complains.  It's just a store with some barriers so let's convert it to
a macro, we don't loose too much type safety by doing that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>

balloon uses virtio32_to_cpu instead of cpu_to_virtio32
to convert a native endian number to virtio.
No practical difference but makes sparse warn.
Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Now that the corresponding feature bit has been renamed,
rename the quirk too - it's about special ways to
do DMA, not necessarily about the IOMMU.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>

Pull x86 fix from Ingo Molnar:
 "A single fix for a potential deadlock when printing a message about
  spurious interrupts"

* tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/i8259: Use printk_deferred() to prevent deadlock

Merge tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - clean the generated moc file for xconfig

 - fix xconfig bugs, and revert some bad commits

* tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove redundant FORCE definition in scripts/Makefile.modpost
  kconfig: qconf: remove wrong ConfigList::firstChild()
  Revert "kconfig: qconf: don't show goback button on splitMode"
  Revert "kconfig: qconf: Change title for the item window"
  kconfig: qconf: remove "goBack" debug message
  kconfig: qconf: use delete[] instead of delete to free array
  kconfig: qconf: compile moc object separately
  kconfig: qconf: use if_changed for qconf.moc rule
  modpost: explain why we can't use strsep

Pull KVM fixes from Paolo Bonzini:
 "Bugfixes and strengthening the validity checks on inputs from new
  userspace APIs.

  Now I know why I shouldn't prepare pull requests on the weekend, it's
  hard to concentrate if your son is shouting about his latest Minecraft
  builds in your ear. Fortunately all the patches were ready and I just
  had to check the test results..."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
  KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
  KVM: arm64: Don't inherit exec permission across page-table levels
  KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
  KVM: nVMX: check for invalid hdr.vmx.flags
  KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
  selftests: kvm: do not set guest mode flag

The same code exists a few lines above.

Fixes: 436b2ac6 ("modpost: invoke modpost only when input files are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).

Commit cc1c08ed ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)

This function does not work. Remove.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull networking fixes from David Miller:

 1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.

 2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.

 3) Fix several clang issues on powerpc in selftests, from Tanner Love.

 4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
    Viro.

 5) Out of bounds access in mlx5e driver, from Raed Salem.

 6) Fix transfer buffer memleak in lan78xx, from Johan Havold.

 7) RCU fixups in rhashtable, from Herbert Xu.

 8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.

 9) vxlan FDB dump must be done under RCU, from Ido Schimmel.

10) Fix use after free in mlxsw, from Ido Schimmel.

11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.

12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
    Thiagarajan.

13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.

14) Fix bpf program reference count leaks in mlx5 during
    mlx5e_alloc_rq(), from Xin Xiong.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  vxlan: fix memleak of fdb
  rds: Prevent kernel-infoleak in rds_notify_queue_get()
  net/sched: The error lable position is corrected in ct_init_module
  net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
  net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
  net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
  net/mlx5e: CT: Support restore ipv6 tunnel
  net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
  ionic: unlock queue mutex in error path
  atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
  net: ethernet: mtk_eth_soc: fix MTU warnings
  net: nixge: fix potential memory leak in nixge_probe()
  devlink: ignore -EOPNOTSUPP errors on dumpit
  rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
  MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
  selftests/bpf: fix netdevsim trap_flow_action_cookie read
  ipv6: fix memory leaks on IPV6_ADDRFORM path
  net/bpfilter: Initialize pos in __bpfilter_process_sockopt
  igb: reinit_locked() should be called with rtnl_lock
  e1000e: continue to init PHY even when failed to disable ULP
  ...

Pull thread fix from Christian Brauner:
 "A simple spelling fix for dequeue_synchronous_signal()"

* tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  signal: fix typo in dequeue_synchronous_signal()

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Fix libtraceevent build with binutils 2.35

 - Fix memory leak in process_dynamic_array_len in libtraceevent

 - Fix 'perf test 68' zstd compression for s390

 - Fix record failure when mixed with ARM SPE event

* tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  libtraceevent: Fix build with binutils 2.35
  perf tools: Fix record failure when mixed with ARM SPE event
  perf tests: Fix test 68 zstd compression for s390
  tools lib traceevent: Fix memory leak in process_dynamic_array_len

When vxlan interface is deleted, all fdbs are deleted by vxlan_flush().
vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains
all-zeros-mac because it is deleted by vxlan_uninit().
But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac
and default vni.
So, the fdb, which contains both all-zeros-mac and non-default vni
will not be deleted.

Test commands:
    ip link add vxlan0 type vxlan dstport 4789 external
    ip link set vxlan0 up
    bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \
	    src_vni 10000 self permanent
    ip link del vxlan0

kmemleak reports as follows:
unreferenced object 0xffff9486b25ced88 (size 96):
  comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s)
  hex dump (first 32 bytes):
    02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff  ........@.......
    46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b  F.............jk
  backtrace:
    [<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan]
    [<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan]
    [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
    [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
    [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
    [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
    [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
    [<00000000dff433e7>] netlink_unicast+0x18e/0x250
    [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
    [<000000002ed55153>] ____sys_sendmsg+0x237/0x260
    [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
    [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
    [<00000000a8f875d2>] do_syscall_64+0x56/0xe0
    [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff9486b1c40080 (size 128):
  comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff  ..........B.....
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan]
    [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
    [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
    [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
    [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
    [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
    [<00000000dff433e7>] netlink_unicast+0x18e/0x250
    [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
    [<000000002ed55153>] ____sys_sendmsg+0x237/0x260
    [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
    [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
    [<00000000a8f875d2>] do_syscall_64+0x56/0xe0
    [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 3ad7a4b1 ("vxlan: support fdb and learning in COLLECT_METADATA mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull pin control fix from Linus Walleij:
 "A single last minute pin control fix to the Qualcomm driver fixing
  missing dual edge PCH interrupts"

* tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180

This reverts commit cc1c08ed.

Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)

Or, the following is simple test code that makes it crash:

    menu "Menu"

    config FOO
            bool "foo"
            default y

    menuconfig BAR
            bool "bar"
            depends on FOO

    endmenu

Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.

When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().

  item = last ? last->nextSibling() : firstChild();

However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.

I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.

In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".

    menu "Menu1"

    config FOO
            bool "foo"
            default y

    menu "Menu2"
            depends on FOO

    menu "Menu3"

    config BAZ
            bool "baz"

    endmenu

    endmenu

    endmenu

It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.

Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts commit 5752ff07.

It added dead code to ConfigList:ConfigList().

The constructor of ConfigList has the initializer, mode(singleMode).

    if (mode == symbolMode)
           setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
    else
           setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");

... always takes the else part.

The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".

ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Every time the goback icon is clicked, the annoying message "goBack"
is displayed on the console.

I guess this line is the left-over debug code of commit af737b4d
("kconfig: qconf: simplify the goBack() logic").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

cppcheck reports "Mismatching allocation and deallocation".

$ cppcheck scripts/kconfig/qconf.cc
Checking scripts/kconfig/qconf.cc ...
scripts/kconfig/qconf.cc:1242:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
  delete data;
         ^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
 char *data = new char[count + 1];
              ^
scripts/kconfig/qconf.cc:1242:10: note: Mismatching allocation and deallocation: data
  delete data;
         ^
scripts/kconfig/qconf.cc:1255:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
  delete data;
         ^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
 char *data = new char[count + 1];
              ^
scripts/kconfig/qconf.cc:1255:10: note: Mismatching allocation and deallocation: data
  delete data;
         ^

Fixes: c4f7398b ("kconfig: qconf: make debug links work again")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Currently, qconf.moc is included from qconf.cc but they can be compiled
independently.

When you modify qconf.cc, qconf.moc does not need recompiling.

Rename qconf.moc to qconf-moc.cc, and split it out as an independent
compilation unit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Regenerate qconf.moc when the moc command is changed.

This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>