- 23 May, 2019 2 commits
-
-
Hans Verkuil authored
The code that fills in the CEC_MSG_CDC_MESSAGE physical address is now done after the sanity checks. It also only does this if the message length is >= 4 (i.e. there is room for the physical address). Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Due to limitations in gpiolib it was impossible to disable the interrupt of an input gpio and then switch it to gpio output and drive it. The only way to achieve that was to free the interrupt first, then switch the direction. When going back to gpio input and using interrupts to read the gpio pin you had to request the irq again. This limitation was lifted in gpiolib in kernel 4.20, but the cec-gpio driver was still using the old workaround implementation. This patch updates the cec-gpio driver to just enable and disable the irq. Signed-off-by:
-
- 22 May, 2019 8 commits
-
-
Hans Verkuil authored
The cec device node can be used right after it was created, but that leaves a race condition where the device was created, but devnode->registered was still false. So an ioctl() would result in an error. So set it to true before calling cdev_device_add() and to false again if cdev_device_add returned an error. Signed-off-by:
-
Neil Armstrong authored
Remove comment and replace with the appropriate SPDX identifier. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Stefan Brüns authored
All error cases inside the function already report errors via dev_err(), and dvb_usb_v2_generic_rw also reports all error cases, so there is no silent code path when an error has occurred. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
-
Stefan Brüns authored
Errors are already reported by the common code in dvb_usb_v2_generic_io (which dvbsky_usb_generic_rw is a wrapper of), so there is no reason report the error again. Signed-off-by:
-
Stefan Brüns authored
actual_length != wlen is the only error path which does not generate an error message. Adding an error message here allows to report a more specific error and to remove the error reporting from the call sites. Also clean up the error paths - in case of an error, the remaining code is skipped, and ret is returned. Skip setting ret and return immediately (no cleanup necessary). Signed-off-by:
-
Sean Young authored
au0828_usb_disconnect() gets the au0828_dev struct via usb_get_intfdata, so it needs to set up for the error paths. Reported-by: syzbot+357d86bcb4cca1a2f572@syzkaller.appspotmail.com Signed-off-by:
-
Oliver Neukum authored
dvb_usb_device_exit() frees and uses the device name in that order. Fix by storing the name in a buffer before freeing it. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+26ec41e9f788b3eba396@syzkaller.appspotmail.com Signed-off-by:
-
Daniel Gomez authored
MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias After this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias alias: of:N*T*Cir-spi-ledC* alias: of:N*T*Cir-spi-led Reported-by:
Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by:
Daniel Gomez <dagmcr@gmail.com> Signed-off-by:
-
- 21 May, 2019 16 commits
-
-
Brad Love authored
Minimum, maximum, and stepsize taken from Silicon Labs reference. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Stanimir Varbanov authored
Venus v4 doesn't send ALLOC_MODE property and thus parser doesn't recognize it as dynamic buffer (for OUTPUT/OUTPUT2 type of buffers) make it obvious in the helper function. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Stanimir Varbanov authored
Add two more not-implemented properties for Venus v4. Signed-off-by:
-
Kelvin Lawson authored
Add support for V4L2 H265 controls: * V4L2_CID_MPEG_VIDEO_HEVC_PROFILE * V4L2_CID_MPEG_VIDEO_HEVC_LEVEL Signed-off-by:
Kelvin Lawson <klawson@lisden.com> Signed-off-by:
-
Alexandre Courbot authored
Patch commit de5a0baf ("media: venus: core: correct maximum hardware load for sdm845") meant to increase the maximum hardware load for sdm845, but ended up changing the one for msm8996 instead. Fixes: de5a0baf ("media: venus: core: correct maximum hardware load for sdm845") Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Philipp Zabel authored
The header report return value from decoder sequence initialization is available on CodaHx4 and CODA7541 already. Use the profile and level identification values reported by the firmware to update codec specific profile and level controls after sequence initialization has succeeded. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
When a menu control is updated via s_ctrl, print the corresponding menu entry string in addition to the numerical value it is set to. Signed-off-by:
-
Philipp Zabel authored
Otherwise the default initialization would always swamp the debug log. Signed-off-by:
-
Philipp Zabel authored
Print a single line containing the following information: - which frame was decoded, including its type, - if no frame was decoded, the reason (code) why - which decoded frame was returned, copied out by either rotator or VODA, - if no frame was returned, the reason (code) why, and - the output queue sequence number, which is only useful in case each queued coded buffer corresponds to exactly one frame. Signed-off-by:
-
Philipp Zabel authored
Add a function to translate from V4L2 buffer flags to 'I'/'P'/'B' characters for debug output. Signed-off-by:
-
Philipp Zabel authored
Use the newly freed verbose debug level 2 for job ready debug messages. Signed-off-by:
-
Philipp Zabel authored
This allows to use coda_debug level 2 for verbose but not quite as verbose debug logging. Register access level logging is of limited use anyway, as this includes busy polling of status bits. Signed-off-by:
-
Eugen Hristev authored
In case the sensor refuses to set the format, avoid printing the error message that no compatible format was found. This means that the try_fmt will be less verbose. The error will be printed only if really a format cannot be found. Some application try all possible formats in a row (gstreamer e.g.) which will flood the console with error messages until a working one is found. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
This adds support for the 'button' control DO_WHITE_BALANCE This feature will enable the ISC to compute the white balance coefficients in a one time shot, at the user discretion. This can be used if a color chart/grey chart is present in front of the camera. The ISC will adjust the coefficients and have them fixed until next balance or until sensor mode is changed. This is particularly useful for white balance adjustment in different lighting scenarios, and then taking photos to similar scenery. The old auto white balance stays in place, where the ISC will adjust every 4 frames to the current scenery lighting, if the scenery is approximately grey in average, otherwise grey world algorithm fails. One time white balance adjustments needs streaming to be enabled, such that capture is enabled and the histogram has data to work with. Histogram without capture does not work in this hardware module. To start the one time white balance procedure: v4l2-ctl --set-ctrl=do_white_balance=1 This feature works only if the sensor is streaming RAW data, as the hardware supports a histogram only for RAW bayer components. If the auto white balance is enabled, do_white_balance does nothing. If the streaming is disabled, or the sensor does not output RAW data, the control is inactive. User controls now include the do_white_balance ctrl: User Controls brightness 0x00980900 (int) : min=-1024 max=1023 step=1 default=0 value=0 flags=slider contrast 0x00980901 (int) : min=-2048 max=2047 step=1 default=256 value=256 flags=slider white_balance_automatic 0x0098090c (bool) : default=1 value=0 do_white_balance 0x0098090d (button) : flags=write-only, execute-on-write gamma 0x00980910 (int) : min=0 max=2 step=1 default=2 value=2 flags=slider Signed-off-by: -
Eugen Hristev authored
Control DO_WHITE_BALANCE is a button, with read only and execute-on-write flags. Adding this control in the proper list in the fill function. After adding it here, we can see output of v4l2-ctl -L do_white_balance 0x0098090d (button) : flags=write-only, execute-on-write Signed-off-by:
-
Eugen Hristev authored
Reworked auto white balance feature (awb) to cope with all four channels. Implemented stretching and grey world algorithms. Using the histogram, the ISC will auto adjust the white balance during frame captures. Because each histogram needs a frame, it will take 4 frames for one adjustment. When the gains were updated by previous code, the registers for the gains were updated only on new streaming start. Now, after each full histogram the registers are updated with new gains. Also, on previous code, if the streaming stopped but not all 3 histograms finished, a new histogram was started either way. This used to lead to an error "timeout to update profile" when streaming was stopped. According to the hardware, histogram can only work together with the capture, not independently. Signed-off-by:
-
- 19 May, 2019 14 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifsLinus Torvalds authored
Pull UBIFS fixes from Richard Weinberger: - build errors wrt xattrs - mismerge which lead to a wrong Kconfig ifdef - missing endianness conversion * tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Convert xattr inum to host order ubifs: Use correct config name for encryption ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: "A few final bits: - large changes to vmalloc, yielding large performance benefits - tweak the console-flush-on-panic code - a few fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: panic: add an option to replay all the printk message in buffer initramfs: don't free a non-existent initrd fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro mm/vmalloc.c: keep track of free blocks for vmap allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption - exclude tracked files from .gitignore - re-enable -Wint-in-bool-context warning - refactor samples/Makefile - stop building immediately if syncconfig fails - do not sprinkle error messages when $(CC) does not exist - move arch/alpha/defconfig to the configs subdirectory - remove crappy header search path manipulation - add comment lines to .config to clarify the end of menu blocks - check uniqueness of module names (adding new warnings intentionally) * tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits) kconfig: use 'else ifneq' for Makefile to improve readability kbuild: check uniqueness of module names kconfig: Terminate menu blocks with a comment in the generated config kbuild: add LICENSES to KBUILD_ALLDIRS kbuild: remove 'addtree' and 'flags' magic for header search paths treewide: prefix header search paths with $(srctree)/ media: prefix header search paths with $(srctree)/ media: remove unneeded header search paths alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig kbuild: terminate Kconfig when $(CC) or $(LD) is missing kbuild: turn auto.conf.cmd into a mandatory include file .gitignore: exclude .get_maintainer.ignore and .gitattributes kbuild: add all Clang-specific flags unconditionally kbuild: Don't try to add '-fcatch-undefined-behavior' flag kbuild: add some extra warning flags unconditionally kbuild: add -Wvla flag unconditionally arch: remove dangling asm-generic wrappers samples: guard sub-directories with CONFIG options kbuild: re-enable int-in-bool-context warning MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux* ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Some I2C core API additions which are kind of simple but enhance error checking for users a lot, especially by returning errno now. There are wrappers to still support the old API but it will be removed once all users are converted" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: add device-managed version of i2c_new_dummy i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Some bug fixes, and an update to the URL's for the final version of Unicode 12.1.0" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid panic during forced reboot due to aborted journal ext4: fix block validity checks for journal inodes using indirect blocks unicode: update to Unicode 12.1.0 final unicode: add missing check for an error return from utf8lookup() ext4: fix miscellaneous sparse warnings ext4: unsigned int compared against zero ext4: fix use-after-free in dx_release() ext4: fix data corruption caused by overlapping unaligned and aligned IO jbd2: fix potential double free ext4: zero out the unused memory region in the extent tree block
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Minor cleanup and fixes, one for stable, four rdma (smbdirect) related. Also adds SEEK_HOLE support" * tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: add support for SEEK_DATA and SEEK_HOLE Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file cifs: Allocate memory for all iovs in smb2_ioctl cifs: Don't match port on SMBDirect transport cifs:smbd Use the correct DMA direction when sending data cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called cifs: use the right include for signal_pending() smb3: trivial cleanup to smb2ops.c cifs: cleanup smb2ops.c and normalize strings smb3: display session id in debug data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates from Ingo Molnar: "perf.data: - Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x perf.data file size reduction on variety of tested workloads what saves storage space on larger server systems where perf.data size can easily reach several tens or even hundreds of GiBs, especially when profiling with DWARF-based stacks and tracing of context switches. perf record: - Improve -user-regs/intr-regs suggestions to overcome errors perf annotate: - Remove hist__account_cycles() from callback, speeding up branch processing (perf record -b) perf stat: - Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for both hardware threads in a core. We can already do this with --per-core, but it's often useful to do this together with other metrics that are collected per hardware thread. I.e. now its possible to do this per-event, and have it mixed with other events not aggregated by core. arm64: - Map Brahma-B53 CPUID to cortex-a53 events. - Add Cortex-A57 and Cortex-A72 events. csky: - Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work on the C-SKY arch. x86: - Add support for recording and printing XMM registers, available, for instance, on Icelake. - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support. UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP. Intel PT: - Fix instructions sampling rate. - Timestamp fixes. - Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste the trees, useful for e-mailing" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) perf stat: Support 'percore' event qualifier perf stat: Factor out aggregate counts printing perf tools: Add a 'percore' event qualifier perf docs: Add description for stderr perf intel-pt: Fix sample timestamp wrt non-taken branches perf intel-pt: Fix improved sample timestamp perf intel-pt: Fix instructions sampling rate perf regs x86: Add X86 specific arch__intr_reg_mask() perf parse-regs: Add generic support for arch__intr/user_reg_mask() perf parse-regs: Split parse_regs perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events perf vendor events arm64: Remove [[:xdigit:]] wildcard perf jevents: Remove unused variable perf test zstd: Fixup verbose mode output perf tests: Implement Zstd comp/decomp integration test perf inject: Enable COMPRESSED record decompression perf report: Implement perf.data record decompression perf record: Implement -z,--compression_level[=<n>] option perf report: Add stub processing of compressed events for -D ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Ingo Molnar: "Fix an EFI-fb regression that affects certain x86 systems" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Ingo Molnar: "This fixes a particularly thorny munmap() bug with MPX, plus fixes a host build environment assumption in objtool" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Allow AR to be overridden with HOSTAR x86/mpx, mm/core: Fix recursive munmap() corruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late. Most of it are smaller fixes and additions, some defconfig updates due to recent development, etc. Code-wise the largest portion is a series of PM updates for the at91 platform, and those have been in linux-next a while through the at91 tree before we picked them up" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: dts: sprd: Add clock properties for serial devices Opt out of scripts/get_maintainer.pl ARM: ixp4xx: Remove duplicated include from common.c soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe arm64: tegra: Disable XUSB support on Jetson TX2 arm64: tegra: Enable SMMU translation for PCI on Tegra186 arm64: tegra: Fix insecure SMMU users for Tegra186 arm64: tegra: Select ARM_GIC_PM amba: tegra-ahb: Mark PM functions as __maybe_unused ARM: dts: logicpd-som-lv: Fix MMC1 card detect ARM: mvebu: drop return from void function ARM: mvebu: prefix coprocessor operand with p ARM: mvebu: drop unnecessary label ARM: mvebu: fix a leaked reference by adding missing of_node_put ARM: socfpga_defconfig: enable LTC2497 ARM: mvebu: kirkwood: remove error message when retrieving mac address ARM: at91: sama5: make ov2640 as a module ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM soc/fsl/qe: Fix an error code in qe_pin_request() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix going back to stable, for a bug on 32-bit introduced when we added support for THREAD_INFO_IN_TASK. A fix for a typo in a recent rework of our hugetlb code that leads to crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE. Two fixes for our recent rework of the address layout on 64-bit hash CPUs, both only triggered when userspace tries to access addresses outside the user or kernel address ranges. Finally a fix for a recently introduced double free in an error path in our cacheinfo code. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C. Harding" * tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/cacheinfo: Remove double free powerpc/mm/hash: Fix get_region_id() for invalid addresses powerpc/mm: Drop VM_BUG_ON in get_region_id() powerpc/mm: Fix crashes with hugepages & 4K pages powerpc/32s: fix flush_hash_pages() on SMP
-
