- 06 Feb, 2013 3 commits
-
-
Alexander Graf authored
commit f4953fe6 upstream. When a file system is mounted on a virtio-blk disk, we then remove it and then reattach it, the reattached disk gets the same disk name and ids as the hot removed one. This leads to very nasty effects - mostly rendering the newly attached device completely unusable. Trying what happens when I do the same thing with a USB device, I saw that the sd node simply doesn't get free'd when a device gets forcefully removed. Imitate the same behavior for vd devices. This way broken vd devices simply are never free'd and newly attached ones keep working just fine. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Sergei Shtylyov authored
commit 2ac788f7 upstream. Commit 5c8a86e1 (usb: musb: drop unneeded musb_debug trickery) erroneously removed '\n' from the driver's banner. Concatenate all the banner substrings while adding it back... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 1d16638e upstream. If we do have endpoints named like "ep-a" then bEndpointAddress is counted internally by the gadget framework. If we do have endpoints named like "ep-1" then bEndpointAddress is assigned from the digit after "ep-". If we do have both, then it is likely that after we used up the "generic" endpoints we will use the digits and thus assign one bEndpointAddress to multiple endpoints. This theory can be proofed by using the completely enabled g_multi. Without this patch, the mass storage won't enumerate and times out because it shares endpoints with RNDIS. This patch also adds fills up the endpoints list so we have in total endpoints 1 to 15 in + out available while some of them are restricted to certain types like BULK or ISO. Without this change the nokia gadget won't load because the system does not provide enough (BULK) endpoints but it did before ep-a - ep-f were removed. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 16 Jan, 2013 37 commits
-
-
Ben Hutchings authored
-
Ed Cashin authored
commit 0a41409c upstream. blk_alloc_queue has already done a bdi_init, so do not bdi_init again in aoeblk_gdalloc. The extra call causes list corruption in the per-CPU backing dev info stats lists. Affected users see console WARNINGs about list_del corruption on percpu_counter_destroy when doing "rmmod aoe" or "aoeflush -a" when AoE targets have been detected and initialized by the system. The patch below applies to v3.6.11, with its v47 aoe driver. It is expected to apply to all currently maintained stable kernels except 3.7.y. A related but different fix has been posted for 3.7.y. References: RedHat bugzilla ticket with original report https://bugzilla.redhat.com/show_bug.cgi?id=853064 LKML discussion of bug and fix http://thread.gmane.org/gmane.linux.kernel/1416336/focus=1416497Reported-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Zhang Rui authored
commit b7e38304 upstream. When system enters power off, the _PSW of Lid device is enabled. But this may cause the system to reboot instead of power off. A proper way to fix this is to always disable lid wakeup capability for S5. References: https://bugzilla.kernel.org/show_bug.cgi?id=35262Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tatyana Nikolova authored
commit 7bfcfa51 upstream. The terminate timer needs to be initialized just once. Signed-off-by:
Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Tatyana Nikolova authored
commit 7d9c199a upstream. Signed-off-by:
-
Jianpeng Ma authored
commit 95ab0003 upstream. Kernel message follows: [ 511.712011] sd 11:0:0:0: [sdf] command ffff8800a4e81400 timed out [ 511.712022] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 [ 511.712024] sas: trying to find task 0xffff8800a4d24c80 [ 511.712026] sas: sas_scsi_find_task: aborting task 0xffff8800a4d24c80 [ 511.712029] drivers/scsi/mvsas/mv_sas.c 1631:mvs_abort_task() mvi=ffff8800b5300000 task=ffff8800a4d24c80 slot=ffff8800b5325038 slot_idx=x0 [ 511.712035] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 511.712040] IP: [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712047] PGD 0 [ 511.712049] Oops: 0002 [#1] SMP [ 511.712052] Modules linked in: mvsas libsas scsi_transport_sas raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx [last unloaded: mvsas] [ 511.712062] CPU 3 [ 511.712066] Pid: 7322, comm: scsi_eh_11 Not tainted 3.5.0+ #106 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M. [ 511.712068] RIP: 0010:[<ffffffff815f8c0c>] [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712073] RSP: 0018:ffff880098d3bcb0 EFLAGS: 00010086 [ 511.712074] RAX: 0000000000000286 RBX: 0000000000000058 RCX: 00000000000000c3 [ 511.712076] RDX: 0000000000000100 RSI: 0000000000000046 RDI: 0000000000000058 [ 511.712078] RBP: ffff880098d3bcb0 R08: 000000000000000a R09: 0000000000000000 [ 511.712080] R10: 00000000000004e8 R11: 00000000000004e7 R12: ffff8800a4d24c80 [ 511.712082] R13: 0000000000000050 R14: ffff8800b5325038 R15: ffff8800a4eafe00 [ 511.712084] FS: 0000000000000000(0000) GS:ffff8800bdb80000(0000) knlGS:0000000000000000 [ 511.712086] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 511.712088] CR2: 0000000000000058 CR3: 00000000a4ce6000 CR4: 00000000000407e0 [ 511.712090] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 511.712091] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 511.712093] Process scsi_eh_11 (pid: 7322, threadinfo ffff880098d3a000, task ffff8800a61dde40) [ 511.712095] Stack: [ 511.712096] ffff880098d3bce0 ffffffff81060683 ffff880000000000 0000000000000000 [ 511.712099] ffff8800a4d24c80 ffff8800b5300000 ffff880098d3bcf0 ffffffffa0076a88 [ 511.712102] ffff880098d3bd50 ffffffffa0079bb5 ffff880000000000 ffff880000000018 [ 511.712106] Call Trace: [ 511.712110] [<ffffffff81060683>] complete+0x23/0x60 [ 511.712115] [<ffffffffa0076a88>] mvs_tmf_timedout+0x18/0x20 [mvsas] [ 511.712119] [<ffffffffa0079bb5>] mvs_slot_complete+0x765/0x7d0 [mvsas] [ 511.712125] [<ffffffffa005a17d>] sas_scsi_recover_host+0x55d/0xdb0 [libsas] [ 511.712128] [<ffffffff8106d600>] ? idle_balance+0xe0/0x130 [ 511.712133] [<ffffffff813b150c>] scsi_error_handler+0xcc/0x470 [ 511.712136] [<ffffffff815f7ad0>] ? __schedule+0x370/0x730 [ 511.712139] [<ffffffff8105f728>] ? __wake_up_common+0x58/0x90 [ 511.712142] [<ffffffff813b1440>] ? scsi_eh_get_sense+0x110/0x110 [ 511.712146] [<ffffffff810571be>] kthread+0x8e/0xa0 [ 511.712150] [<ffffffff816015f4>] kernel_thread_helper+0x4/0x10 [ 511.712153] [<ffffffff81057130>] ? flush_kthread_work+0x120/0x120 [ 511.712156] [<ffffffff816015f0>] ? gs_change+0xb/0xb [ 511.712157] Code: 8a 00 01 00 00 89 d0 f0 66 0f b1 0f 66 39 d0 0f 94 c0 0f b6 c0 5d c3 0f 1f 84 00 00 00 00 00 55 48 89 e5 9c 58 fa ba 00 01 00 00 <f0> 66 0f c1 17 0f b6 ce 38 d1 74 11 0f 1f 84 00 00 00 00 00 f3 [ 511.712191] RIP [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712194] RSP <ffff880098d3bcb0> [ 511.712196] CR2: 0000000000000058 [ 511.712198] ---[ end trace a781c7b1e65db92c ]--- Signed-off-by:
Jianpeng Ma <majianpeng@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 354e4aa3 ] RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] All TCP stacks MAY implement the following mitigation. TCP stacks that implement this mitigation MUST add an additional input check to any incoming segment. The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. Move tcp_send_challenge_ack() before tcp_ack() to avoid a forward declaration. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit bd090dfc ] We added support for RFC 5961 in latest kernels but TCP fails to perform exhaustive check of ACK sequence. We can update our view of peer tsval from a frame that is later discarded by tcp_ack() This makes timestamps enabled sessions vulnerable to injection of a high tsval : peers start an ACK storm, since the victim sends a dupack each time it receives an ACK from the other peer. As tcp_validate_incoming() is called before tcp_ack(), we should not peform tcp_replace_ts_recent() from it, and let callers do it at the right time. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e3715899 ] Followup of commit 0c24604b (tcp: implement RFC 5961 4.2) As reported by Vijay Subramanian, we should send a challenge ACK instead of a dup ack if a SYN flag is set on a packet received out of window. This permits the ratelimiting to work as intended, and to increase correct SNMP counters. Suggested-by:
Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0c24604b ] Implement the RFC 5691 mitigation against Blind Reset attack using SYN bit. Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop incoming packet, instead of resetting the session. Add a new SNMP counter to count number of challenge acks sent in response to SYN packets. (netstat -s | grep TCPSYNChallenge) Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session because of a SYN flag. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 282f23c6 ] Implement the RFC 5691 mitigation against Blind Reset attack using RST bit. Idea is to validate incoming RST sequence, to match RCV.NXT value, instead of previouly accepted window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND) If sequence is in window but not an exact match, send a "challenge ACK", so that the other part can resend an RST with the appropriate sequence. Add a new sysctl, tcp_challenge_ack_limit, to limit number of challenge ACK sent per second. Add a new SNMP counter to count number of challenge acks sent. (netstat -s | grep TCPChallengeACK) Signed-off-by:
-
Stefan Hasko authored
[ Upstream commit d2fe85da ] Fixed integer overflow in function htb_dequeue Signed-off-by:
Stefan Hasko <hasko.stevo@gmail.com> Acked-by:
-
Christoph Paasch authored
[ Upstream commit e337e24d ] If in either of the above functions inet_csk_route_child_sock() or __inet_inherit_port() fails, the newsk will not be freed: unreferenced object 0xffff88022e8a92c0 (size 1592): comm "softirq", pid 0, jiffies 4294946244 (age 726.160s) hex dump (first 32 bytes): 0a 01 01 01 0a 01 01 02 00 00 00 00 a7 cc 16 00 ................ 02 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8153d190>] kmemleak_alloc+0x21/0x3e [<ffffffff810ab3e7>] kmem_cache_alloc+0xb5/0xc5 [<ffffffff8149b65b>] sk_prot_alloc.isra.53+0x2b/0xcd [<ffffffff8149b784>] sk_clone_lock+0x16/0x21e [<ffffffff814d711a>] inet_csk_clone_lock+0x10/0x7b [<ffffffff814ebbc3>] tcp_create_openreq_child+0x21/0x481 [<ffffffff814e8fa5>] tcp_v4_syn_recv_sock+0x3a/0x23b [<ffffffff814ec5ba>] tcp_check_req+0x29f/0x416 [<ffffffff814e8e10>] tcp_v4_do_rcv+0x161/0x2bc [<ffffffff814eb917>] tcp_v4_rcv+0x6c9/0x701 [<ffffffff814cea9f>] ip_local_deliver_finish+0x70/0xc4 [<ffffffff814cec20>] ip_local_deliver+0x4e/0x7f [<ffffffff814ce9f8>] ip_rcv_finish+0x1fc/0x233 [<ffffffff814cee68>] ip_rcv+0x217/0x267 [<ffffffff814a7bbe>] __netif_receive_skb+0x49e/0x553 [<ffffffff814a7cc3>] netif_receive_skb+0x50/0x82 This happens, because sk_clone_lock initializes sk_refcnt to 2, and thus a single sock_put() is not enough to free the memory. Additionally, things like xfrm, memcg, cookie_values,... may have been initialized. We have to free them properly. This is fixed by forcing a call to tcp_done(), ending up in inet_csk_destroy_sock, doing the final sock_put(). tcp_done() is necessary, because it ends up doing all the cleanup on xfrm, memcg, cookie_values, xfrm,... Before calling tcp_done, we have to set the socket to SOCK_DEAD, to force it entering inet_csk_destroy_sock. To avoid the warning in inet_csk_destroy_sock, inet_num has to be set to 0. As inet_csk_destroy_sock does a dec on orphan_count, we first have to increase it. Calling tcp_done() allows us to remove the calls to tcp_clear_xmit_timer() and tcp_cleanup_congestion_control(). A similar approach is taken for dccp by calling dccp_done(). This is in the kernel since 093d2823 (tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()), thus since version >= 2.6.37. Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by:
-
Dave Kleikamp authored
[ Upstream commit 6cb9c369 ] Modifying the huge pte's requires that all the underlying pte's be modified. Version 2: added missing flush_tlb_page() Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by:
-
Steven Rostedt authored
commit 45959ee7 upstream. When gcc inlines a function, it does not mark it with the mcount prologue, which in turn means that inlined functions are not traced by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then gcc is allowed not to inline a function that is marked inline. Depending on the options and the compiler, a function may or may not be traced by the function tracer, depending on whether gcc decides to inline a function or not. This has caused several problems in the pass becaues gcc is not always consistent with what it decides to inline between different gcc versions. Some places should not be traced (like paravirt native_* functions) and these are mostly marked as inline. When gcc decides not to inline the function, and if that function should not be traced, then the ftrace function tracer will suddenly break when it use to work fine. This becomes even harder to debug when different versions of gcc will not inline that function, making the same kernel and config work for some gcc versions and not work for others. By making all functions marked inline to not be traced will remove the ambiguity that gcc adds when it comes to tracing functions marked inline. All gcc versions will be consistent with what functions are traced and having volatile working code will be removed. Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs to have notrace added, as the attribute __always_inline will force the function to be inlined and then not traced. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Stanislaw Gruszka authored
commit ab9d6e4f upstream. This revert: commit be03d4a4 Author: Andreas Hartmann <andihartmann@01019freenet.de> Date: Tue Apr 17 00:25:28 2012 +0200 rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails To fix problem workaround by above commit use IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL flag (see change log for "mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL" patch). Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=42828Bisected-by:
Francisco Pina Martins <f.pinamartins@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Stanislaw Gruszka authored
commit 5b632fe8 upstream. Commit f0425bed "mac80211: retry sending failed BAR frames later instead of tearing down aggr" caused regression on rt2x00 hardware (connection hangs). This regression was fixed by commit be03d4a4 "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails". But the latter commit caused yet another problem reported in https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22 After long discussion in this thread: http://mid.gmane.org/20121018075615.GA18212@redhat.com and testing various alternative solutions, which failed on one or other setup, we have no other good fix for the issues like just revert both mentioned earlier commits. To do not affect other hardware which benefit from commit f0425bed, instead of reverting it, introduce flag that when used will restore mac80211 behaviour before the commit. Signed-off-by:
-
Andreas Hartmann authored
commit be03d4a4 upstream. There are connection stalls or very poor throughputs with rt2800 hardware using 802.11n in AP mode since patch "mac80211: retry sending failed BAR frames later instead of tearing down aggr"[1][2]. Since rt2800 hardware is not able to correctly report the tx status of BAR frames, this patch removes as workaround the existing error handling on AP side, which lets mac80211 send a BAR when an AMPDU subframe fails. As a result, most wifi clients (aside from Intel STAs on Windows) instead will timeout now the reorder buffer and request the lost frame again. The correct solution would be, to tear down BA session on AP side. This patch was born on the basis of "[RFT] rt2x00: Tear down BA session on QoS frame failure"[3]. Thanks to Helmut Schaa for his support! [1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/83297/focus=83304 [2] http://git.kernel.org/?p=linux/kernel/git/linville/wireless-testing.git;a=commit;h=f0425beda4d404a6e751439b562100b902ba9c98 [3] http://thread.gmane.org/gmane.linux.drivers.rt2x00.user/569Signed-off-by:
Andreas Hartmann <andihartmann@01019freenet.de> Acked-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Eric Wong authored
commit 128dd175 upstream. EPOLL_CTL_MOD sets the interest mask before calling f_op->poll() to ensure events are not missed. Since the modifications to the interest mask are not protected by the same lock as ep_poll_callback, we need to ensure the change is visible to other CPUs calling ep_poll_callback. We also need to ensure f_op->poll() has an up-to-date view of past events which occured before we modified the interest mask. So this barrier also pairs with the barrier in wq_has_sleeper(). This should guarantee either ep_poll_callback or f_op->poll() (or both) will notice the readiness of a recently-ready/modified item. This issue was encountered by Andreas Voellmy and Junchang(Jason) Wang in: http://thread.gmane.org/gmane.linux.kernel/1408782/Signed-off-by:
Eric Wong <normalperson@yhbt.net> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Voellmy <andreas.voellmy@yale.edu> Tested-by:
"Junchang(Jason) Wang" <junchang.wang@yale.edu> Cc: netdev@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Namjae Jeon authored
commit fb719c59 upstream. Incrementing lenExtents even while writing to a hole is bad for performance as calls to udf_discard_prealloc and udf_truncate_tail_extent would not return from start if isize != lenExtents Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Tony Prisk authored
commit 2f90b683 upstream. tm_mon is 0..11, whereas vt8500 expects 1..12 for the month field, causing invalid date errors for January, and causing the day field to roll over incorrectly. The century flag is only handled in vt8500_rtc_read_time, but not set in vt8500_rtc_set_time. This patch corrects the behaviour of the century flag. Signed-off-by:
Edgar Toernig <froese@gmx.de> Signed-off-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Tony Prisk authored
commit 532db570 upstream. Control register bitfield for 12H/24H mode is handled incorrectly. Setting CR_24H actually enables 12H mode. This patch renames the define and changes the initialization code to correctly set 24H mode. Signed-off-by:
-
Michal Hocko authored
commit 53a59fc6 upstream. Since commit e303297e ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Rafael J. Wysocki authored
commit 4f5f64cf upstream. At one point acpi_device_set_id() checks if acpi_device_hid(device) returns NULL, but that never happens, so system bus devices with an empty list of PNP IDs are given the dummy HID ("device") instead of the "system bus HID" ("LNXSYBUS"). Fix the code to use the right check. Signed-off-by:
-
Trond Myklebust authored
commit c6567ed1 upstream. This patch ensures that we free the rpc_task after the cleanup callbacks are done in order to avoid a deadlock problem that can be triggered if the callback needs to wait for another workqueue item to complete. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Weston Andros Adamson <dros@netapp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by:
-
Xi Wang authored
commit e25fbe38 upstream. The following null pointer check is broken. *option = match_strdup(args); return !option; The pointer `option' must be non-null, and thus `!option' is always false. Use `!*option' instead. The bug was introduced in commit c5cb09b6 ("Cleanup: Factor out some cut-and-paste code."). Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Lothar Waßmann authored
commit 6c1ecba8 upstream. The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature. The write in mxsfb_disable_controller() sets the data_cnt for the LCD DMA to 0 which obviously means the max. count for the LCD DMA and leads to overwriting arbitrary memory when the display is unblanked. Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Acked-by:
Juergen Beisert <jbe@pengutronix.de> Tested-by:
Lauri Hintsala <lauri.hintsala@bluegiga.net> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Aaro Koskinen authored
commit eda85d6a upstream. Check that the AGP aperture can be mapped. This follows a similar change done for Radeon (commit 365048ff, drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.). The patch fixes the following error seen on G5 iMac: nouveau E[ DRM] failed to create kernel channel, -12 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58806Reviewed-by:
Michel Dänzer <michel@daenzer.net> Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Dave Airlie <airlied@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Niels Ole Salscheider authored
commit 0a9069d3 upstream. DDC information can be accessed using AUX CH Fixes failure to probe monitors on some systems with DP bridge chips. agd5f: minor fixes Signed-off-by:
Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit cafa59b9 upstream. Apple cards do not provide data tables in the vbios so we have to hard code the connector parameters in the driver. Reported-by:
Albrecht Dreß <albrecht.dress@arcor.de> Signed-off-by:
-
Alex Deucher authored
commit 6a556039 upstream. RV250 found on ppc embedded boards. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Gabor Juhos authored
commit e6449c9b upstream. The missing NULL terminator can cause a panic on PPC405 boards during boot: Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit Finalizing device tree... flat tree at 0x6a5160 bootconsole [udbg0] enabled Page fault in user mode with in_atomic() = 1 mm = (null) NIP = c0275f50 MSR = fffffffe Oops: Weird page fault, sig: 11 [#1] PowerPC 40x Platform Modules linked in: NIP: c0275f50 LR: c0275f60 CTR: c0280000 REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1) MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001 TASK = c02662a8[0] 'swapper' THREAD: c0274000 GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0 GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10 Call Trace: ---[ end trace 31fd0ba7d8756001 ]--- Kernel panic - not syncing: Attempted to kill the idle task! The panic happens since commit 9597abe0 (sections: fix section conflicts in arch/powerpc), however the root cause of this is that the NULL terminator were not added in commit a4f740cf (of/flattree: Add of_flat_dt_match() helper function). Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Shan Hai authored
commit ce73ec6d upstream. The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by:
Shan Hai <shan.hai@windriver.com> Signed-off-by:
-
Christian Lamparter authored
commit 4010fe21 upstream. This patch adds USBIDs for: - DrayTek Vigor 530 - Zoom 4410a It also adds a note about Gemtek WUBI-100GW and SparkLAN WL-682 USBID conflict [WUBI-100GW is a ISL3886+NET2280 (LM86 firmare) solution, whereas WL-682 is a ISL3887 (LM87 firmware)] device. Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Sujith Manoharan authored
commit a796a1dd upstream. Populate iniModesRxGain with the correct initvals array for AR9485 v1.1 Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Tomasz Guszkowski authored
commit 3194b7fc upstream. Added USB ID for T-Com Sinus 154 data II. Signed-off-by:
Tomasz Guszkowski <tsg@o2.pl> Acked-by:
-
Hugh Dickins authored
commit f2a07f40 upstream. Recently I suggested using "mount -o remount,mpol=local /tmp" in NUMA mempolicy testing. Very nasty. Reading /proc/mounts, /proc/pid/mounts or /proc/pid/mountinfo may then corrupt one bit of kernel memory, often in a page table (causing "Bad swap" or "Bad page map" warning or "Bad pagetable" oops), sometimes in a vm_area_struct or rbnode or somewhere worse. "mpol=prefer" and "mpol=prefer:Node" are equally toxic. Recent NUMA enhancements are not to blame: this dates back to 2.6.35, when commit e17f74af "mempolicy: don't call mpol_set_nodemask() when no_context" skipped mpol_parse_str()'s call to mpol_set_nodemask(), which used to initialize v.preferred_node, or set MPOL_F_LOCAL in flags. With slab poisoning, you can then rely on mpol_to_str() to set the bit for node 0x6b6b, probably in the next page above the caller's stack. mpol_parse_str() is only called from shmem_parse_options(): no_context is always true, so call it unused for now, and remove !no_context code. Set v.nodes or v.preferred_node or MPOL_F_LOCAL as mpol_to_str() might expect. Then mpol_to_str() can ignore its no_context argument also, the mpol being appropriately initialized whether contextualized or not. Rename its no_context unused too, and let subsequent patch remove them (that's not needed for stable backporting, which would involve rejects). I don't understand why MPOL_LOCAL is described as a pseudo-policy: it's a reasonable policy which suffers from a confusing implementation in terms of MPOL_PREFERRED with MPOL_F_LOCAL. I believe this would be much more robust if MPOL_LOCAL were recognized in switch statements throughout, MPOL_F_LOCAL deleted, and MPOL_PREFERRED use the (possibly empty) nodes mask like everyone else, instead of its preferred_node variant (I presume an optimization from the days before MPOL_LOCAL). But that would take me too long to get right and fully tested. Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
