- 28 Oct, 2012 11 commits
-
-
Kees Cook authored
commit 2702b152 upstream. Calling uname() with the UNAME26 personality set allows a leak of kernel stack contents. This fixes it by defensively calculating the length of copy_to_user() call, making the len argument unsigned, and initializing the stack buffer to zero (now technically unneeded, but hey, overkill). CVE-2012-0957 Reported-by:
PaX Team <pageexec@freemail.hu> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit fdc858a4 upstream. The sharpsl_pcmcia_ops structure gets passed into sa11xx_drv_pcmcia_probe, where it gets accessed at run-time, unlike all other pcmcia drivers that pass their structures into platform_device_add_data, which makes a copy. This means the gcc warning is valid and the structure must not be marked as __initdata. Without this patch, building collie_defconfig results in: drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory compilation terminated. make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1 make[2]: *** [drivers/pcmcia] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pavel Machek <pavel@suse.cz> Cc: linux-pcmcia@lists.infradead.org Cc: Jochen Friedrich <jochen@scram.de> Signed-off-by:
-
Trond Myklebust authored
commit f39c1bfb and commit 84e28a30 upstream. Commit 43cedbf0 (SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot) is causing hangs in the case of NFS over UDP mounts. Since neither the UDP or the RDMA transport mechanism use dynamic slot allocation, we can skip grabbing the socket lock for those transports. Add a new rpc_xprt_op to allow switching between the TCP and UDP/RDMA case. Note that the NFSv4.1 back channel assigns the slot directly through rpc_run_bc_task, so we can ignore that case. Reported-by:
Dick Streefland <dick.streefland@altium.nl> Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Sasha Levin authored
commit 212ba906 upstream. The buffer size in read_flush() is too small for the longest possible values for it. This can lead to a kernel stack corruption: [ 43.047329] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff833e64b4 [ 43.047329] [ 43.049030] Pid: 6015, comm: trinity-child18 Tainted: G W 3.5.0-rc7-next-20120716-sasha #221 [ 43.050038] Call Trace: [ 43.050435] [<ffffffff836c60c2>] panic+0xcd/0x1f4 [ 43.050931] [<ffffffff833e64b4>] ? read_flush.isra.7+0xe4/0x100 [ 43.051602] [<ffffffff810e94e6>] __stack_chk_fail+0x16/0x20 [ 43.052206] [<ffffffff833e64b4>] read_flush.isra.7+0xe4/0x100 [ 43.052951] [<ffffffff833e6500>] ? read_flush_pipefs+0x30/0x30 [ 43.053594] [<ffffffff833e652c>] read_flush_procfs+0x2c/0x30 [ 43.053596] [<ffffffff812b9a8c>] proc_reg_read+0x9c/0xd0 [ 43.053596] [<ffffffff812b99f0>] ? proc_reg_write+0xd0/0xd0 [ 43.053596] [<ffffffff81250d5b>] do_loop_readv_writev+0x4b/0x90 [ 43.053596] [<ffffffff81250fd6>] do_readv_writev+0xf6/0x1d0 [ 43.053596] [<ffffffff812510ee>] vfs_readv+0x3e/0x60 [ 43.053596] [<ffffffff812511b8>] sys_readv+0x48/0xb0 [ 43.053596] [<ffffffff8378167d>] system_call_fastpath+0x1a/0x1f Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Heiko Carstens authored
commit c985cb37 upstream. Because of a change in the s390 arch backend of binutils (commit 23ecd77 "Pick the default arch depending on the target size" in binutils repo) 31 bit builds will fail since the linker would now try to create 64 bit binary output. Fix this by setting OUTPUT_ARCH to s390:31-bit instead of s390. Thanks to Andreas Krebbel for figuring out the issue. Fixes this build error: LD init/built-in.o s390x-4.7.2-ld: s390:31-bit architecture of input file `arch/s390/kernel/head.o' is incompatible with s390:64-bit output Cc: Andreas Krebbel <Andreas.Krebbel@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Dan Carpenter authored
commit 44009105 upstream. The "event" variable is a u16 so the shift will always wrap to zero making the line a no-op. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
-
Trond Myklebust authored
commit cd0b16c1 upstream. If the filehandle is stale, or open access is denied for some reason, nlm_fopen() may return one of the NLMv4-specific error codes nlm4_stale_fh or nlm4_failed. These get passed right through nlm_lookup_file(), and so when nlmsvc_retrieve_args() calls the latter, it needs to filter the result through the cast_status() machinery. Failure to do so, will trigger the BUG_ON() in encode_nlm_stat... Signed-off-by:
Larry McVoy <lm@bitmover.com> Signed-off-by:
-
Chris Metcalf authored
commit 627072b0 upstream. The tile tool chain uses the .eh_frame information for backtracing. The vmlinux build drops any .eh_frame sections at link time, but when present in kernel modules, it causes a module load failure due to the presence of unsupported pc-relative relocations. When compiling to use compiler feedback support, the compiler by default omits .eh_frame information, so we don't see this problem. But when not using feedback, we need to explicitly suppress the .eh_frame. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Michal Hocko authored
commit 7386cdbf upstream. Git commit 09a1d34f "nohz: Make idle/iowait counter update conditional" introduced a bug in regard to cpu hotplug. The effect is that the number of idle ticks in the cpu summary line in /proc/stat is still counting ticks for offline cpus. Reproduction is easy, just start a workload that keeps all cpus busy, switch off one or more cpus and then watch the idle field in top. On a dual-core with one cpu 100% busy and one offline cpu you will get something like this: %Cpu(s): 48.7 us, 1.3 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, %0.0 st The problem is that an offline cpu still has ts->idle_active == 1. To fix this we should make sure that the cpu is online when calling get_cpu_idle_time_us and get_cpu_iowait_time_us. [Srivatsa: Rebased to current mainline] Reported-by:
Michal Hocko <mhocko@suse.cz> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Lukas Czerner authored
commit 5de35e8d upstream. Currently if len argument in ext4_trim_fs() is smaller than one block, the 'end' variable underflow. Avoid that by returning EINVAL if len is smaller than file system block. Also remove useless unlikely(). Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Dmitry Monakhov authored
commit dee1f973 upstream. We assumed that at the time we call ext4_convert_unwritten_extents_endio() extent in question is fully inside [map.m_lblk, map->m_len] because it was already split during submission. But this may not be true due to a race between writeback vs fallocate. If extent in question is larger than requested we will split it again. Special precautions should being done if zeroout required because [map.m_lblk, map->m_len] already contains valid data. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
- 21 Oct, 2012 29 commits
-
-
Greg Kroah-Hartman authored
-
Maxim Kachur authored
commit 10f571d0 upstream. Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id. Signed-off-by:
Maxim Kachur <mcdebugger@duganet.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 733a48e5 upstream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721Signed-off-by:
-
Peter Ujfalusi authored
commit 034940a6 upstream. It is not Vinrator but Vibrator. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit a1b98e12 upstream. Signed-off-by:
-
Mark Brown authored
commit 5ae9eb4c upstream. Signed-off-by:
-
Guennadi Liakhovetski authored
commit 57451e43 upstream. shdma doesn't support transfer re-scheduling or triggering from callbacks or from atomic context. The fsi driver issues DMA transfers from a tasklet context, which is a bug. To fix it convert tasklet to a work. Reported-by:
Do Q.Thang <dq-thang@jinso.co.jp> Tested-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
David Henningsson authored
commit 71aa5ebe upstream. Even when CONFIG_SND_DEBUG is not enabled, we don't want to return an arbitrary memory location when the channel count is larger than we expected. Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Fabio Porcedda authored
commit 9c6d196d upstream. Don't fail the initialization check for the platform_data if there is avaiable an associated device tree node. Signed-off-by:
Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Tyler Hicks authored
commit 64e6651d upstream. Since eCryptfs only calls fput() on the lower file in ecryptfs_release(), eCryptfs should call the lower filesystem's ->flush() from ecryptfs_flush(). If the lower filesystem implements ->flush(), then eCryptfs should try to flush out any dirty pages prior to calling the lower ->flush(). If the lower filesystem does not implement ->flush(), then eCryptfs has no need to do anything in ecryptfs_flush() since dirty pages are now written out to the lower filesystem in ecryptfs_release(). Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Tyler Hicks authored
commit 7149f255 upstream. Fixes a regression caused by: 821f7494 eCryptfs: Revert to a writethrough cache model That patch reverted some code (specifically, 32001d6f) that was necessary to properly handle open() -> mmap() -> close() -> dirty pages -> munmap(), because the lower file could be closed before the dirty pages are written out. Rather than reapplying 32001d6f, this approach is a better way of ensuring that the lower file is still open in order to handle writing out the dirty pages. It is called from ecryptfs_release(), while we have a lock on the lower file pointer, just before the lower file gets the final fput() and we overwrite the pointer. https://launchpad.net/bugs/1047261Signed-off-by:
Artemy Tregubenko <me@arty.name> Tested-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tyler Hicks authored
commit 821f7494 upstream. A change was made about a year ago to get eCryptfs to better utilize its page cache during writes. The idea was to do the page encryption operations during page writeback, rather than doing them when initially writing into the page cache, to reduce the number of page encryption operations during sequential writes. This meant that the encrypted page would only be written to the lower filesystem during page writeback, which was a change from how eCryptfs had previously wrote to the lower filesystem in ecryptfs_write_end(). The change caused a few eCryptfs-internal bugs that were shook out. Unfortunately, more grave side effects have been identified that will force changes outside of eCryptfs. Because the lower filesystem isn't consulted until page writeback, eCryptfs has no way to pass lower write errors (ENOSPC, mainly) back to userspace. Additionaly, it was reported that quotas could be bypassed because of the way eCryptfs may sometimes open the lower filesystem using a privileged kthread. It would be nice to resolve the latest issues, but it is best if the eCryptfs commits be reverted to the old behavior in the meantime. This reverts: 32001d6f "eCryptfs: Flush file in vma close" 5be79de2 "eCryptfs: Flush dirty pages in setattr" 57db4e8d "ecryptfs: modify write path to encrypt page in writepage" Signed-off-by:
-
Tyler Hicks authored
commit e3ccaa97 upstream. Historically, eCryptfs has only initialized lower files in the ecryptfs_create() path. Lower file initialization is the act of writing the cryptographic metadata from the inode's crypt_stat to the header of the file. The ecryptfs_open() path already expects that metadata to be in the header of the file. A number of users have reported empty lower files in beneath their eCryptfs mounts. Most of the causes for those empty files being left around have been addressed, but the presence of empty files causes problems due to the lack of proper cryptographic metadata. To transparently solve this problem, this patch initializes empty lower files in the ecryptfs_open() error path. If the metadata is unreadable due to the lower inode size being 0, plaintext passthrough support is not in use, and the metadata is stored in the header of the file (as opposed to the user.ecryptfs extended attribute), the lower file will be initialized. The number of nested conditionals in ecryptfs_open() was getting out of hand, so a helper function was created. To avoid the same nested conditional problem, the conditional logic was reversed inside of the helper function. https://launchpad.net/bugs/911507Signed-off-by:
-
Tyler Hicks authored
commit 8bc2d3cf upstream. ecryptfs_create() creates a lower inode, allocates an eCryptfs inode, initializes the eCryptfs inode and cryptographic metadata attached to the inode, and then writes the metadata to the header of the file. If an error was to occur after the lower inode was created, an empty lower file would be left in the lower filesystem. This is a problem because ecryptfs_open() refuses to open any lower files which do not have the appropriate metadata in the file header. This patch properly unlinks the lower inode when an error occurs in the later stages of ecryptfs_create(), reducing the chance that an empty lower file will be left in the lower filesystem. https://launchpad.net/bugs/872905Signed-off-by:
-
Peter Huewe authored
commit abce9ac2 upstream. tpm_write calls tpm_transmit without checking the return value and assigns the return value unconditionally to chip->pending_data, even if it's an error value. This causes three bugs. So if we write to /dev/tpm0 with a tpm_param_size bigger than TPM_BUFSIZE=0x1000 (e.g. 0x100a) and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a) tpm_transmit returns -E2BIG which is assigned to chip->pending_data as -7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully been written to the TPM, altough this is not true (bug #1). As we did write more than than TPM_BUFSIZE bytes but tpm_write reports that only TPM_BUFSIZE bytes have been written the vfs tries to write the remaining bytes (in this case 10 bytes) to the tpm device driver via tpm_write which then blocks at /* cannot perform a write until the read has cleared either via tpm_read or a user_read_timer timeout */ while (atomic_read(&chip->data_pending) != 0) msleep(TPM_TIMEOUT); for 60 seconds, since data_pending is -7 and nobody is able to read it (since tpm_read luckily checks if data_pending is greater than 0) (#bug 2). After that the remaining bytes are written to the TPM which are interpreted by the tpm as a normal command. (bug #3) So if the last bytes of the command stream happen to be a e.g. tpm_force_clear this gets accidentally sent to the TPM. This patch fixes all three bugs, by propagating the error code of tpm_write and returning -E2BIG if the input buffer is too big, since the response from the tpm for a truncated value is bogus anyway. Moreover it returns -EBUSY to userspace if there is a response ready to be read. Signed-off-by:
Peter Huewe <peter.huewe@infineon.com> Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by:
-
Hiroaki SHIMODA authored
commit 8edc0e62 upstream. This patch originated from Hiroaki SHIMODA but has been modified by Intel with some minor cleanups and additional commit log text. Denys Fedoryshchenko and others reported Tx stalls on e1000e with BQL enabled. Issue was root caused to hardware delays. They were introduced because some of the e1000e hardware with transmit writeback bursting enabled, waits until the driver does an explict flush OR there are WTHRESH descriptors to write back. Sometimes the delays in question were on the order of seconds, causing visible lag for ssh sessions and unacceptable tx completion latency, especially for BQL enabled kernels. To avoid possible Tx stalls, change WTHRESH back to 1. The current plan is to investigate a method for re-enabling WTHRESH while not harming BQL, but those patches will be later for net-next if they work. please enqueue for stable since v3.3 as this bug was introduced in commit 3f0cfa3b Author: Tom Herbert <therbert@google.com> Date: Mon Nov 28 16:33:16 2011 +0000 e1000e: Support for byte queue limits Changes to e1000e to use byte queue limits. Reported-by:
Denys Fedoryshchenko <denys@visp.net.lb> Tested-by:
Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> CC: eric.dumazet@gmail.com CC: therbert@google.com Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jan Kara authored
commit 09e05d48 upstream. ext3 users of data=journal mode with blocksize < pagesize were occasionally hitting assertion failure in journal_commit_transaction() checking whether the transaction has at least as many credits reserved as buffers attached. The core of the problem is that when a file gets truncated, buffers that still need checkpointing or that are attached to the committing transaction are left with buffer_mapped set. When this happens to buffers beyond i_size attached to a page stradding i_size, subsequent write extending the file will see these buffers and as they are mapped (but underlying blocks were freed) things go awry from here. The assertion failure just coincidentally (and in this case luckily as we would start corrupting filesystem) triggers due to journal_head not being properly cleaned up as well. Under some rare circumstances this bug could even hit data=ordered mode users. There the assertion won't trigger and we would end up corrupting the filesystem. We fix the problem by unmapping buffers if possible (in lots of cases we just need a buffer attached to a transaction as a place holder but it must not be written out anyway). And in one case, we just have to bite the bullet and wait for transaction commit to finish. Reviewed-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jani Nikula authored
commit 0c96c65b upstream. The dithering introduced in commit 3b5c78a3 Author: Adam Jackson <ajax@redhat.com> Date: Tue Dec 13 15:41:00 2011 -0800 drm/i915/dp: Dither down to 6bpc if it makes the mode fit stores the INTEL_MODE_DP_FORCE_6BPC flag in the private_flags of the adjusted mode, while i9xx_crtc_mode_set() and ironlake_crtc_mode_set() use the original mode, without the flag, so it would never have any effect. However, the BPC was clamped by VBT settings, making things work by coincidence, until that part was removed in commit 4344b813 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 10 11:10:20 2012 +0200 Use adjusted_mode instead of mode when checking for INTEL_MODE_DP_FORCE_6BPC to make the flag have effect. v2: Don't forget to fix this in i9xx_crtc_mode_set() also, pointed out by Daniel both before and after sending the first patch. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47621 CC: Adam Jackson <ajax@redhat.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Egbert Eich authored
commit 08291847 upstream. radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[] to destroy each of them. radeon_ext_tmds_enc_destroy() however also has code to destroy it's associated I2C bus rec which has been obtained by radeon_i2c_lookup() and is therefore also in the i2c_bus[] list. This causes a double free resulting in a kernel panic when unloading the radeon driver. Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this problem. agd5f: fix compiler warning Signed-off-by:
Egbert Eich <eich@suse.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jean-Christian de Rivaz authored
commit e7d491a1 upstream. This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572 and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized. Reference: http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5 See idVendor and idProduct in table 6-1. Device Descriptors Signed-off-by:
Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by:
-
Jan Engelhardt authored
commit 82e6bfe2 upstream. Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when a running state is saved to userspace and then reinstated from there. Make sure that private xt_limit area is initialized with correct values. Otherwise, random matchings due to use of uninitialized memory. Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
-
Florian Westphal authored
commit 7a909ac7 upstream. credit_cap can be set to credit, which avoids inlining user2credits twice. Also, remove inline keyword and let compiler decide. old: 684 192 0 876 36c net/netfilter/xt_limit.o 4927 344 32 5303 14b7 net/netfilter/xt_hashlimit.o now: 668 192 0 860 35c net/netfilter/xt_limit.o 4793 344 32 5169 1431 net/netfilter/xt_hashlimit.o Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 2614f864 upstream. In __nf_ct_expect_check, the function refresh_timer returns 1 if a matching expectation is found and its timer is successfully refreshed. This results in nf_ct_expect_related returning 0. Note that at this point: - the passed expectation is not inserted in the expectation table and its timer was not initialized, since we have refreshed one matching/existing expectation. - nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation timer is in some undefined state just after the allocation, until it is appropriately initialized. This can be a problem for the SIP helper during the expectation addition: ... if (nf_ct_expect_related(rtp_exp) == 0) { if (nf_ct_expect_related(rtcp_exp) != 0) nf_ct_unexpect_related(rtp_exp); ... Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp) returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does: spin_lock_bh(&nf_conntrack_lock); if (del_timer(&exp->timeout)) { nf_ct_unlink_expect(exp); nf_ct_expect_put(exp); } spin_unlock_bh(&nf_conntrack_lock); Note that del_timer always returns false if the timer has been initialized. However, the timer was not initialized since setup_timer was not called, therefore, the expectation timer remains in some undefined state. If I'm not missing anything, this may lead to the removal an unexistent expectation. To fix this, the optimization that allows refreshing an expectation is removed. Now nf_conntrack_expect_related looks more consistent to me since it always add the expectation in case that it returns success. Thanks to Patrick McHardy for participating in the discussion of this patch. I think this may be the source of the problem described by: http://marc.info/?l=netfilter-devel&m=134073514719421&w=2Reported-by:
Rafal Fitt <rafalf@aplusc.com.pl> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
commit f22eb25c upstream. Via-headers are parsed beginning at the first character after the Via-address. When the address is translated first and its length decreases, the offset to start parsing at is incorrect and header parameters might be missed. Update the offset after translating the Via-address to fix this. Signed-off-by:
-
Pablo Neira Ayuso authored
commit 3f509c68 upstream. We're hitting bug while trying to reinsert an already existing expectation: kernel BUG at kernel/timer.c:895! invalid opcode: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack] [<ffffffff812d423a>] ? in4_pton+0x72/0x131 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip] [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip] [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip] [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip] We have to remove the RTP expectation if the RTCP expectation hits EBUSY since we keep trying with other ports until we succeed. Reported-by:
-
Lin Ming authored
commit 9e33ce45 upstream. IPVS should not reset skb->nf_bridge in FORWARD hook by calling nf_reset for NAT replies. It triggers oops in br_nf_forward_finish. [ 579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.781792] PGD 218f9067 PUD 0 [ 579.781865] Oops: 0000 [#1] SMP [ 579.781945] CPU 0 [ 579.781983] Modules linked in: [ 579.782047] [ 579.782080] [ 579.782114] Pid: 4644, comm: qemu Tainted: G W 3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard /30E8 [ 579.782300] RIP: 0010:[<ffffffff817b1ca5>] [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.782455] RSP: 0018:ffff88007b003a98 EFLAGS: 00010287 [ 579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a [ 579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00 [ 579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90 [ 579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02 [ 579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000 [ 579.783177] FS: 0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70 [ 579.783306] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0 [ 579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760) [ 579.783919] Stack: [ 579.783959] ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00 [ 579.784110] ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7 [ 579.784260] ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0 [ 579.784477] Call Trace: [ 579.784523] <IRQ> [ 579.784562] [ 579.784603] [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8 [ 579.784707] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.784797] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.784906] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.784995] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.785175] [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b [ 579.785179] [<ffffffff817ac417>] __br_forward+0x97/0xa2 [ 579.785179] [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257 [ 579.785179] [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb [ 579.785179] [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1 [ 579.785179] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54 [ 579.785179] [<ffffffff817ad62a>] br_handle_frame+0x213/0x229 [ 579.785179] [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257 [ 579.785179] [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1 [ 579.785179] [<ffffffff816e69fc>] process_backlog+0x99/0x1e2 [ 579.785179] [<ffffffff816e6800>] net_rx_action+0xdf/0x242 [ 579.785179] [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0 [ 579.785179] [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 579.785179] [<ffffffff8188812c>] call_softirq+0x1c/0x30 The steps to reproduce as follow, 1. On Host1, setup brige br0(192.168.1.106) 2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd 3. Start IPVS service on Host1 ipvsadm -A -t 192.168.1.106:80 -s rr ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m 4. Run apache benchmark on Host2(192.168.1.101) ab -n 1000 http://192.168.1.106/ ip_vs_reply4 ip_vs_out handle_response ip_vs_notrack nf_reset() { skb->nf_bridge = NULL; } Actually, IPVS wants in this case just to replace nfct with untracked version. So replace the nf_reset(skb) call in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call. Signed-off-by:
Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Jozsef Kadlecsik authored
commit a73f89a6 upstream. The patch "127f5591 netfilter: ipset: fix timeout value overflow bug" broke the SET target when no timeout was specified. Reported-by:
Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Jozsef Kadlecsik authored
commit 127f5591 upstream. Large timeout parameters could result wrong timeout values due to an overflow at msec to jiffies conversion (reported by Andreas Herz) [ This patch was mangled by Pablo Neira Ayuso since David Laight and Eric Dumazet noticed that we were using hardcoded 1000 instead of MSEC_PER_SEC to calculate the timeout ] Signed-off-by:
-
Pablo Neira Ayuso authored
commit 5b423f6a upstream. Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by:
Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by:
-
