- 11 May, 2020 35 commits
-
-
Miquel Raynal authored
Both in nand_do_read_ops() and nand_do_write_ops() there is a boolean called use_bufpoi which is set to true in case of unaligned request or when there is a need for a DMA-able buffer. It basically means "use a bounce buffer". Depending on the value of use_bufpoi, the bufpoi variable is always used and will either point to the original buffer or to the nand_chip structure "internal data buffer" (this buffer is allocated with kmalloc() on purpose so that it will be DMA-compliant). In all cases bufpoi is used so the boolean name is misleading. Rename use_bufpoi to be use_bouce_buf to be more accurate. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-6-miquel.raynal@bootlin.com
-
Miquel Raynal authored
Clarify these comments which are not very accurate (even wrong in the read case). Signed-off-by:
-
Miquel Raynal authored
NAND controller drivers can set the NAND_USE_BOUNCE_BUFFER flag to a chip 'option' field. With this flag, the core is responsible of providing DMA-able buffers. The current behavior is to not force the use of a bounce buffer when the core thinks this is not needed. So in the end the name is a bit misleading, because in theory we will always have a DMA buffer but in practice it will not always be a bounce buffer. Rename this flag NAND_USES_DMA to be more accurate. Signed-off-by:
-
Miquel Raynal authored
These flags are in a strange order, reorder the list, add spaces when it is relevant, pack definitions that are related. There is no functional change. Signed-off-by:
-
Miquel Raynal authored
Use the BIT() macro instead of defining a 8-digit value. Signed-off-by:
-
Boris Brezillon authored
The MTD layer provides an SLC mode (purely software emulation of SLC behavior) addressing the paired-pages corruption issue, which was the main reason for refusing attaching MLC NANDs to UBI. Relax this rule and allow partitions that have the MTD_EMULATE_SLC_ON_MLC flag set to be attached. Signed-off-by:
Boris Brezillon <bbrezillon@kernel.org> Signed-off-by:
Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-9-miquel.raynal@bootlin.com
-
Boris Brezillon authored
Add a new option to set the MTD_SLC_ON_MLC_EMULATION flag. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Boris Brezillon authored
Parse the slc-mode property and set the MTD_MLC_IN_SLC_MODE flag when present. Signed-off-by:
-
Boris Brezillon authored
Add a boolean property to force a specific partition attached to an MLC NAND to be accessed in an emulated SLC mode this making this partition immune to paired-pages corruptions. Signed-off-by:
-
Boris Brezillon authored
MLC NANDs can be made a bit more reliable if we only program the lower page of each pair. At least, this solves the paired-pages corruption issue. Signed-off-by:
-
Boris Brezillon authored
TC58TEG5DCLTA00 uses a stride of 3 between its lower and upper page. Set the appropriate pairing scheme at init time. Signed-off-by:
-
Boris Brezillon authored
Define a new page pairing scheme for MLC NANDs with a distance of 3 pages between the lower and upper page. Signed-off-by:
-
Boris Brezillon authored
TC58TEG5DCLTA00 is an MLC NAND which requires scrambling and supports SDR timings mode 5. Signed-off-by:
-
Boris Brezillon authored
Now that exec_op() is implemented we no longer need to implement the legacy hooks. Signed-off-by:
-
Boris Brezillon authored
So we can later get rid of the legacy hooks. Signed-off-by:
-
Boris Brezillon authored
Now that we have our own controller struct we can keep the MMIO pointer in there and use instead of using the chip->legacy.IO_ADDR_{R,W} fields. Signed-off-by: -
Boris Brezillon authored
The CS553x companion chip embeds 4 NAND controllers. Declare them as NAND controllers instead of NAND chips. That's done in preparation of the transition to exec_op(). Signed-off-by:
-
Miquel Raynal authored
Before reworking a little bit the JEDEC detection code, let's clean the coding style of an if statement to improve readability. Signed-off-by:
-
Miquel Raynal authored
Use a macro to define the number of parameter page instead of hardcoding it everywhere. Signed-off-by:
-
Miquel Raynal authored
During detection the logic on the NAND bus is: /* Regular ONFI detection */ 1/ read the three NAND parameter pages /* Extended parameter page detection */ 2/ send "read the NAND parameter page" commands without reading actual data 3/ move the column pointer to the extended page and read it If fact, as long as there is nothing happening on the NAND bus between 1/ and 3/, the operation 2/ is redundant so remove it. Signed-off-by: -
Miquel Raynal authored
There is no need for copying the parameter page, playing with pointers does the trick. There is not functional change. Signed-off-by:
-
Miquel Raynal authored
Use a macro to define the number of parameter page instead of hardcoding it everywhere. Signed-off-by:
-
Miquel Raynal authored
Before reworking a little bit the ONFI detection code, let's clean the coding style of the if statements to improve readability. Signed-off-by:
-
Miquel Raynal authored
During ONFI detection, the CRC derived from the parameter page and the CRC supposed to be at the end of the parameter page are compared. If they do not match, the second then the third copies of the page are tried. The current implementation compares the newly derived CRC with the CRC contained in the first page only. So if this particular CRC area has been corrupted, then the detection will fail for a wrong reason. Fix this issue by checking the derived CRC against the right one. Fixes: 39138c1f ("mtd: rawnand: use bit-wise majority to recover the ONFI param page") Cc: stable@vger.kernel.org Signed-off-by:
-
Miquel Raynal authored
tR and tCCS are currently wrongly expressed in femtoseconds, while we expect these values to be expressed in picoseconds. Set right hardcoded values. Fixes: 6a943386 mtd: rawnand: add default values for dynamic timings Signed-off-by:
-
Miquel Raynal authored
Convert the timings union into a structure containing the mode and the actual values. The values are still a union in prevision of the addition of the NVDDR modes. Signed-off-by:
-
Miquel Raynal authored
There is no correction involved at this point, it is just a matter of reading registers and checking whether bitflips have occurred or not. Rename the function to clarify it. Signed-off-by:
-
Miquel Raynal authored
Cosmetic change to clarify the purpose of the function. Signed-off-by:
-
Miquel Raynal authored
Ensure all chips are deregistered and cleaned in case of error during the probe. Fixes: 02f26ecf ("mtd: nand: add reworked Marvell NAND controller driver") Signed-off-by:
-
Miquel Raynal authored
Do not call nand_release() while the MTD device has not been registered, use nand_cleanup() instead. Fixes: 02f26ecf ("mtd: nand: add reworked Marvell NAND controller driver") Signed-off-by:
-
Miquel Raynal authored
Switch from the old platform_get_resource()/devm_ioremap_resource() couple to the newer devm_platform_ioremap_resource() helper. Signed-off-by:
-
Miquel Raynal authored
In a previous fix, I changed the condition on which the timeout of an IRQ is reached from: if (!ret) into: if (ret && !pending) While having a non-zero return code is usual in the Linux kernel, here ret comes from a wait_for_completion_timeout() which returns 0 when the waiting period is too long. Hence, the revised condition should be: if (!ret && !pending) The faulty patch did not produce any error because of the !pending condition so this change is finally purely cosmetic and does not change the actual driver behavior. Fixes: cafb56dd ("mtd: rawnand: marvell: prevent timeouts on a loaded machine") Signed-off-by: -
Miquel Raynal authored
When the ECC strength is too weak compared to the NAND chip requirements, display the values so that it is clear for people how much they are far from the requirements (and might get in troubles in the future). Signed-off-by:
-
Boris Brezillon authored
To match the types passed by au1550nd_exec_instr() function. Signed-off-by:
-
Boris Brezillon authored
Now that exec_op() is implemented we can get rid of all other hooks. Signed-off-by:
-
- 10 May, 2020 5 commits
-
-
Boris Brezillon authored
So we can later get rid of the legacy interface implementation. Signed-off-by:
-
Boris Brezillon authored
We are about to re-use those for the exec_op() implementation which will not rely on au1550_hwcontrol(). Let's patch those helpers to simply use the iomem address stored in the context. Signed-off-by:
-
Masahiro Yamada authored
The Denali IP have several registers to specify how many clock cycles should be waited between falling/rising signals. You can improve the NAND access performance by programming these registers with optimized values. Because struct nand_sdr_timings represents the device requirement in pico seconds, denali_setup_data_interface() computes the register values by dividing the device timings with the clock period. Marek Vasut reported this driver in the latest kernel does not work on his SOCFPGA board. (The on-board NAND chip is mode 5) The suspicious parameter is acc_clks, so this commit relaxes it. The Denali NAND Flash Memory Controller User's Guide describes this register as follows: acc_clks signifies the number of bus interface clk_x clock cycles, controller should wait from read enable going low to sending out a strobe of clk_x for capturing of incoming data. Currently, acc_clks is calculated only based on tREA, the delay on the chip side. This does not include additional delays that come from the data path on the PCB and in the SoC, load capacity of the pins, etc. This relatively becomes a big factor on faster timing modes like mode 5. Before supporting the ->setup_data_interface() hook (e.g. Linux 4.12), the Denali driver hacks acc_clks in a couple of ways [1] [2] to support the timing mode 5. We would not go back to the hard-coded acc_clks, but we need to include this factor into the delay somehow. Let's say the amount of the additional delay is 10000 pico sec. In the new calculation, acc_clks is determined by timings->tREA_max + data_setup_on_host. Also, prolong the RE# low period to make sure the data hold is met. Finally, re-center the data latch timing for extra safety. [1] https://github.com/torvalds/linux/blob/v4.12/drivers/mtd/nand/denali.c#L276 [2] https://github.com/torvalds/linux/blob/v4.12/drivers/mtd/nand/denali.c#L282Reported-by:Marek Vasut <marex@denx.de> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by:
-
Boris Brezillon authored
->exec_op() is passed a check_only argument that encodes when the controller should just check whether the operation is supported or not without executing it. Some controllers simply ignore this arguments, others don't but keep modifying some of the registers before returning. Let's fix all those drivers. Signed-off-by:
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by:
-
