- 07 Apr, 2009 40 commits
-
-
Hans Verkuil authored
All drivers that use tvaudio now use v4l2_subdev, so we can remove the legacy code from tvaudio. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
All drivers that use the tuner module now use v4l2_subdev, so we can remove the legacy code from this module. Note that TUNER_SET_CONFIG is still called by tuner-simple.c, so we have to handle it via a .command callback. There must be a better way to do this, but for now this will work. Signed-off-by:
-
Hans Verkuil authored
All drivers that use tvp5150 now use v4l2_subdev, so we can remove the legacy code from tvp5150. Signed-off-by:
-
Hans Verkuil authored
All drivers that use saa7115 now use v4l2_subdev, so we can remove the legacy code from saa7115. Signed-off-by:
-
Hans Verkuil authored
All drivers that use msp3400 now use v4l2_subdev, so we can remove the legacy code from msp3400. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Janne Grunau authored
Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
Thierry Merle <thierry.merle@free.fr> Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
VIDIOC_QUERYCAP should return the proper bus info. In the case of USB, this should be generated by usb_make_path(), being something like: usb-0000:00:1d.7-2 Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: -
Mauro Carvalho Chehab authored
Remove some printk's that were needed only during development phase. Also, cleans the printed messages to produce a nicer result. Signed-off-by: -
Mauro Carvalho Chehab authored
Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: -
Mauro Carvalho Chehab authored
Simplifies the usb probe logic, cleaning the printed messages during the probing phase. Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: -
Mauro Carvalho Chehab authored
cx231xxinfo needs dev->name. However, this is not declared on the time the check for the max number of supported devices is done. Signed-off-by: -
Mauro Carvalho Chehab authored
Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: -
Sri Deevi authored
Signed-off-by:
Srinivasa Deevi <srinivasa.deevi@conexant.com> Reviewed-by:
-
Sri Deevi authored
This patch converts cx231xx to the new v4l2 dev/subdev, doing: - Conversion of i2c calls to subdev calls; - all subdev calls to call_all(); - Corrected the header file order in cx231xx.h; - Added tuner frequency setting. Signed-off-by:
-
Sri Deevi authored
The audio module requested in driver differs with module created by Makefile. Makefile is corrected to create the same module name required by driver. Also, corrected the strings that shows wrong name. Signed-off-by:
-
Hans Verkuil authored
An earlier commit accidentally broke the detection of the cx25837 part of the cx23885. Reinstated the commented out code. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Sri Deevi authored
changed the pcb-config.c/h to pcb-cfg.c/h for short names. Signed-off-by:
-
Sri Deevi authored
Fixes several CodingStyle issues on the driver. Signed-off-by:
-
Mauro Carvalho Chehab authored
Only cx231xx-video needs linux/version.h, due to KERNEL_VERSION macro, that is used by V4L2 API. This patch moves the KERNEL_VERSION to its proper place and starts with 0,0,1. There are still much more to be fixed on later patches Signed-off-by: -
Mauro Carvalho Chehab authored
This patch cleans up CodingStyle on the following source files: There are still much more to be fixed on later patches Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Sri Deevi authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Sri Deevi authored
cx231xx has a cx25840 inside the chip. However, some different initializations are used for this variant. Signed-off-by:
-
Janne Grunau authored
If usb_interface.dev is used as dev parameter for v4l2_device_register v4l2_dev.name contains the v4l driver/module name and usb device and interface instead of a simple "usb x-y". It also matches the recommendation to set the parent devices for usb drivers. Signed-off-by:
-
Paulius Zaleckas authored
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs. create mode 100644 arch/arm/mach-mx1/ksym_mx1.c create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h create mode 100644 drivers/media/video/mx1_camera.c Signed-off-by:
Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by:
Darius Augulis <augulis.darius@gmail.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
With the i.MX31 transition to clkdev clock names have changed, but mistakenly the "mx3-camera.0" has been registered with a non-NULL connection ID, which is not necessary, since this is the only clock, used by the capture interface driver. Fix the clock definition and the driver to use NULL as a connection ID. Signed-off-by:
Guennadi Liakhovetski <lg@denx.de> Acked-by:
-
Guennadi Liakhovetski authored
Use platform power hook to turn the camera on and off. Signed-off-by:
-
Stuart Hall authored
Patch to provide basic support for DigitalNow TinyTwin Remote. It uses same remote as TwinHan AzureWave AD-TU700(704J). Signed-off-by:
Stuart Hall <mailing-lists@enginuities.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Devin Heitmueller authored
Setup the i2c clock speed to be definable on a per-board basis. This allows us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid of code which sets it on a basis of what chip the i2c master is talking to at any given time (which could have caused issues because i2c slaves should never receive commands at a clock higher than their supported clock speed). Signed-off-by:
Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by:
-
Devin Heitmueller authored
Change the #define entries for the i2c registers to be more meaningful, and document the valid values for the registers. Note that this changeset makes *no* functional changes to the code. Signed-off-by:
-
