- 17 Jan, 2018 40 commits
-
-
Tom Lendacky authored
commit e4d0e84e upstream. To aid in speculation control, make LFENCE a serializing instruction since it has less overhead than MFENCE. This is done by setting bit 1 of MSR 0xc0011029 (DE_CFG). Some families that support LFENCE do not have this MSR. For these families, the LFENCE instruction is already serializing. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/20180108220921.12580.71694.stgit@tlendack-t1.amdoffice.netSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jike Song authored
commit 8d56eff2 upstream. The following code contains dead logic: 162 if (pgd_none(*pgd)) { 163 unsigned long new_p4d_page = __get_free_page(gfp); 164 if (!new_p4d_page) 165 return NULL; 166 167 if (pgd_none(*pgd)) { 168 set_pgd(pgd, __pgd(_KERNPG_TABLE | __pa(new_p4d_page))); 169 new_p4d_page = 0; 170 } 171 if (new_p4d_page) 172 free_page(new_p4d_page); 173 } There can't be any difference between two pgd_none(*pgd) at L162 and L167, so it's always false at L171. Dave Hansen explained: Yes, the double-test was part of an optimization where we attempted to avoid using a global spinlock in the fork() path. We would check for unallocated mid-level page tables without the lock. The lock was only taken when we needed to *make* an entry to avoid collisions. Now that it is all single-threaded, there is no chance of a collision, no need for a lock, and no need for the re-check. As all these functions are only called during init, mark them __init as well. Fixes: 03f4424f ("x86/mm/pti: Add functions to clone kernel PMDs") Signed-off-by:
Jike Song <albcamus@gmail.com> Signed-off-by:
-
Dave Hansen authored
commit 262b6b30 upstream. This is another case similar to what EFI does: create a new set of page tables, map some code at a low address, and jump to it. PTI mistakes this low address for userspace and mistakenly marks it non-executable in an effort to make it unusable for userspace. Undo the poison to allow execution. Fixes: 385ce0ea ("x86/mm/pti: Add Kconfig") Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit 61dc0f55 upstream. Implement the CPU vulnerabilty show functions for meltdown, spectre_v1 and spectre_v2. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180107214913.177414879@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
commit 87590ce6 upstream. As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by:
-
David Woodhouse authored
commit 99c6fa25 upstream. Add the bug bits for spectre v1/2 and force them unconditionally for all cpus. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Dave Hansen authored
commit 01c9b17b upstream. Add some details about how PTI works, what some of the downsides are, and how to debug it when things go wrong. Also document the kernel parameter: 'pti/nopti'. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Moritz Lipp <moritz.lipp@iaik.tugraz.at> Cc: Daniel Gruss <daniel.gruss@iaik.tugraz.at> Cc: Michael Schwarz <michael.schwarz@iaik.tugraz.at> Cc: Richard Fellner <richard.fellner@student.tugraz.at> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Andi Lutomirsky <luto@kernel.org> Link: https://lkml.kernel.org/r/20180105174436.1BC6FA2B@viggo.jf.intel.comSigned-off-by:
-
Jiri Kosina authored
commit de53c378 upstream. EFI_OLD_MEMMAP's efi_call_phys_prolog() calls set_pgd() with swapper PGD that has PAGE_USER set, which makes PTI set NX on it, and therefore EFI can't execute it's code. Fix that by forcefully clearing _PAGE_NX from the PGD (this can't be done by the pgprot API). _PAGE_NX will be automatically reintroduced in efi_call_phys_epilog(), as _set_pgd() will again notice that this is _PAGE_USER, and set _PAGE_NX on it. Tested-by:
Dimitri Sivanich <sivanich@hpe.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Benjamin Poirier authored
commit 4110e02e upstream. e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan() are the two functions that may be assigned to mac.ops.check_for_link when phy.media_type == e1000_media_type_copper. Commit 19110cfb ("e1000e: Separate signaling for link check/link up") changed the meaning of the return value of check_for_link for copper media but only adjusted the first function. This patch adjusts the second function likewise. Reported-by:
Christian Hesse <list@eworm.de> Reported-by:
Gabriel C <nix.or.die@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047 Fixes: 19110cfb ("e1000e: Separate signaling for link check/link up") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Tested-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
John Johansen authored
commit 0dda0b3f upstream. Given a label with a profile stack of A//&B or A//&C ... A ptrace rule should be able to specify a generic trace pattern with a rule like ptrace trace A//&**, however this is failing because while the correct label match routine is called, it is being done post label decomposition so it is always being done against a profile instead of the stacked label. To fix this refactor the cross check to pass the full peer label in to the label_match. Fixes: 290f458a ("apparmor: allow ptrace checks to be finer grained than just capability") Reported-by:
Matthew Garrett <mjg59@google.com> Tested-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit a0b12803 upstream. Depending on configuration mem_section can now be an array or a pointer to an array allocated dynamically. In most cases, we can continue to refer to it as 'mem_section' regardless of what it is. But there's one exception: '&mem_section' means "address of the array" if mem_section is an array, but if mem_section is a pointer, it would mean "address of the pointer". We've stepped onto this in kdump code. VMCOREINFO_SYMBOL(mem_section) writes down address of pointer into vmcoreinfo, not array as we wanted. Let's introduce VMCOREINFO_SYMBOL_ARRAY() that would handle the situation correctly for both cases. Link: http://lkml.kernel.org/r/20180112162532.35896-1-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Fixes: 83e3c487 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y") Acked-by:
Baoquan He <bhe@redhat.com> Acked-by:
Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hans de Goede authored
commit aa1f10e8 upstream. class_find_device already does a get_device on the returned device. So the device returned by of_find_mux_chip_by_node is already referenced and we should not reference it again (and unref it on error). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Icenowy Zheng authored
commit 928afc85 upstream. The UAS mode of Norelsys NS1068(X) is reported to fail to work on several platforms with the following error message: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8 xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001 And when trying to mount a partition on the disk the disk will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Acked-by:
-
Ben Seri authored
commit 06e7e776 upstream. In the function l2cap_parse_conf_rsp and in the function l2cap_parse_conf_req the following variable is declared without initialization: struct l2cap_conf_efs efs; In addition, when parsing input configuration parameters in both of these functions, the switch case for handling EFS elements may skip the memcpy call that will write to the efs variable: ... case L2CAP_CONF_EFS: if (olen == sizeof(efs)) memcpy(&efs, (void *)val, olen); ... The olen in the above if is attacker controlled, and regardless of that if, in both of these functions the efs variable would eventually be added to the outgoing configuration request that is being built: l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs), (unsigned long) &efs); So by sending a configuration request, or response, that contains an L2CAP_CONF_EFS element, but with an element length that is not sizeof(efs) - the memcpy to the uninitialized efs variable can be avoided, and the uninitialized variable would be returned to the attacker (16 bytes). This issue has been assigned CVE-2017-1000410 Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by:
Ben Seri <ben@armis.com> Signed-off-by:
-
Viktor Slavkovic authored
commit 443064cb upstream. A lock-unlock is missing in ASHMEM_SET_SIZE ioctl which can result in a race condition when mmap is called. After the !asma->file check, before setting asma->size, asma->file can be set in mmap. That would result in having different asma->size than the mapped memory size. Combined with ASHMEM_UNPIN ioctl and shrinker invocation, this can result in memory corruption. Signed-off-by:
Viktor Slavkovic <viktors@google.com> Signed-off-by:
-
Shuah Khan authored
commit 5fd77a3a upstream. v_send_ret_submit() handles urb with a null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
commit b78d830f upstream. Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Signed-off-by:
-
Shuah Khan authored
commit e1346fd8 upstream. usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses. Remove kernel addresses from usb device and urb debug msgs and improve the message content. Instead of printing parent device and bus addresses, print parent device and bus names. Signed-off-by:
-
Alan Stern authored
commit 7ae2c3c2 upstream. The error-handling pathways in usb_add_gadget_udc_release() are messed up. Aside from the uninformative statement labels, they can deallocate the udc structure after calling put_device(), which is a double-free. This was observed by KASAN in automatic testing. This patch cleans up the routine. It preserves the requirement that when any failure occurs, we call put_device(&gadget->dev). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Pete Zaitcev authored
commit 46eb14a6 upstream. Automated tests triggered this by opening usbmon and accessing the mmap while simultaneously resizing the buffers. This bug was with us since 2006, because typically applications only size the buffers once and thus avoid racing. Reported by Kirill A. Shutemov. Reported-by: <syzbot+f9831b881b3e849829fc@syzkaller.appspotmail.com> Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Stefan Agner authored
commit b8626f1d upstream. When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Christian Holl authored
commit d14ac576 upstream. This adds the ELV ALC 8xxx Battery Charging device to the list of USB IDs of drivers/usb/serial/cp210x.c Signed-off-by:
Christian Holl <cyborgx1@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Diego Elio Pettenò authored
commit 43074132 upstream. Add IDs for the OneTouch Verio IQ that comes with an embedded USB-to-serial converter. Signed-off-by:
Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by:
-
Daniel Borkmann authored
commit 7891a87e upstream. The following snippet was throwing an 'unknown opcode cc' warning in BPF interpreter: 0: (18) r0 = 0x0 2: (7b) *(u64 *)(r10 -16) = r0 3: (cc) (u32) r0 s>>= (u32) r0 4: (95) exit Although a number of JITs do support BPF_ALU | BPF_ARSH | BPF_{K,X} generation, not all of them do and interpreter does neither. We can leave existing ones and implement it later in bpf-next for the remaining ones, but reject this properly in verifier for the time being. Fixes: 17a52670 ("bpf: verifier (add verifier core)") Reported-by: syzbot+93c4904c5c70348a6890@syzkaller.appspotmail.com Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
commit bbeb6e43 upstream. syzkaller tried to alloc a map with 0xfffffffd entries out of a userns, and thus unprivileged. With the recently added logic in b2157399 ("bpf: prevent out-of-bounds speculation") we round this up to the next power of two value for max_entries for unprivileged such that we can apply proper masking into potentially zeroed out map slots. However, this will generate an index_mask of 0xffffffff, and therefore a + 1 will let this overflow into new max_entries of 0. This will pass allocation, etc, and later on map access we still enforce on the original attr->max_entries value which was 0xfffffffd, therefore triggering GPF all over the place. Thus bail out on overflow in such case. Moreover, on 32 bit archs roundup_pow_of_two() can also not be used, since fls_long(max_entries - 1) can result in 32 and 1UL << 32 in 32 bit space is undefined. Therefore, do this by hand in a 64 bit variable. This fixes all the issues triggered by syzkaller's reproducers. Fixes: b2157399 ("bpf: prevent out-of-bounds speculation") Reported-by: syzbot+b0efb8e572d01bce1ae0@syzkaller.appspotmail.com Reported-by: syzbot+6c15e9744f75f2364773@syzkaller.appspotmail.com Reported-by: syzbot+d2f5524fb46fd3b312ee@syzkaller.appspotmail.com Reported-by: syzbot+61d23c95395cc90dbc2b@syzkaller.appspotmail.com Reported-by: syzbot+0d363c942452cca68c01@syzkaller.appspotmail.com Signed-off-by:
-
Alexei Starovoitov authored
commit b2157399 upstream. Under speculation, CPUs may mis-predict branches in bounds checks. Thus, memory accesses under a bounds check may be speculated even if the bounds check fails, providing a primitive for building a side channel. To avoid leaking kernel data round up array-based maps and mask the index after bounds check, so speculated load with out of bounds index will load either valid value from the array or zero from the padded area. Unconditionally mask index for all array types even when max_entries are not rounded to power of 2 for root user. When map is created by unpriv user generate a sequence of bpf insns that includes AND operation to make sure that JITed code includes the same 'index & index_mask' operation. If prog_array map is created by unpriv user replace bpf_tail_call(ctx, map, index); with if (index >= max_entries) { index &= map->index_mask; bpf_tail_call(ctx, map, index); } (along with roundup to power 2) to prevent out-of-bounds speculation. There is secondary redundant 'if (index >= max_entries)' in the interpreter and in all JITs, but they can be optimized later if necessary. Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array) cannot be used by unpriv, so no changes there. That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on all architectures with and without JIT. v2->v3: Daniel noticed that attack potentially can be crafted via syscall commands without loading the program, so add masking to those paths as well. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
commit 3572f04c upstream. Moving the init_clock_gating() call from intel_modeset_init_hw() to intel_modeset_gem_init() had an unintended effect of not applying some workarounds on resume. This, for example, cause some kind of corruption to appear at the top of my IVB Thinkpad X1 Carbon LVDS screen after hibernation. Fix the problem by explicitly calling init_clock_gating() from the resume path. I really hope this doesn't break something else again. At least the problems reported at https://bugs.freedesktop.org/show_bug.cgi?id=103549 didn't make a comeback, even after a hibernate cycle. v2: Reorder the init_clock_gating vs. modeset_init_hw to match the display reset path (Rodrigo) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 6ac43272 ("drm/i915: Move init_clock_gating() back to where it was") Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171116160215.25715-1-ville.syrjala@linux.intel.comSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 675f7ff3) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 6ac43272 upstream. Apparently setting up a bunch of GT registers before we've properly initialized the rest of the GT hardware leads to these setting being lost. So looks like I broke HSW with commit b7048ea1 ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") by doing init_clock_gating() too early. This should actually affect other platforms as well, but apparently not to such a great degree. What I was ultimately after in that commit was to move the ilk_init_lp_watermarks() call earlier. So let's undo the damage and move init_clock_gating() back to where it was, and call ilk_init_lp_watermarks() just before the watermark state readout. This highlights how fragile and messed up our init order really is. I wonder why we even initialize the display before gem. The opposite order would make much more sense to me... v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must be done before all planes might get disabled. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mark Janes <mark.a.janes@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reported-by:
Mark Janes <mark.a.janes@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549 Fixes: b7048ea1 ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.htmlSigned-off-by:
-
Kenneth Graunke authored
commit 4636bda8 upstream. Geminilake requires the 3D driver to select whether barriers are intended for compute shaders, or tessellation control shaders, by whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when switching pipelines. Failure to do this properly can result in GPU hangs. Unfortunately, this means it needs to switch mid-batch, so only userspace can properly set it. To facilitate this, the kernel needs to whitelist the register. The workarounds page currently tags this as applying to Broxton only, but that doesn't make sense. The documentation for the register it references says the bit userspace is supposed to toggle only exists on Geminilake. Empirically, the Mesa patch to toggle this bit appears to fix intermittent GPU hangs in tessellation control shader barrier tests on Geminilake; we haven't seen those hangs on Broxton. v2: Mention WA #0862 in the comment (it doesn't have a name). Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Acked-by:
-
Zhi Wang authored
commit 121d760d upstream. A shadow page table entry needs to be cleared after being set as post-sync. This patch fixes the recent error reported in Win7-32 test. Fixes: 2707e444 ("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 0d9cac0c upstream. The vmw_view_cmd_to_type() function returns vmw_view_max (3) on error. It's one element beyond the end of the vmw_view_cotables[] table. My read on this is that it's possible to hit this failure. header->id comes from vmw_cmd_check() and it's a user controlled number between 1040 and 1225 so we can hit that error. But I don't have the hardware to test this code. Fixes: d80efd5c ("drm/vmwgfx: Initial DX support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 98648ae6 upstream. Buffer objects need to be either pinned or reserved while a map is active, that's not the case here, so avoid caching the framebuffer map. This will cause increasing mapping activity mainly when we don't do page flipping. This fixes occasional garbage filled screens when the framebuffer has been evicted after the map. Since in-kernel mapping of whole buffer objects is error-prone on 32-bit architectures and also quite inefficient, we will revisit this later. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
David Gibson authored
commit ecba8297 upstream. The KVM_PPC_ALLOCATE_HTAB ioctl(), implemented by kvmppc_alloc_reset_hpt() is supposed to completely clear and reset a guest's Hashed Page Table (HPT) allocating or re-allocating it if necessary. In the case where an HPT of the right size already exists and it just zeroes it, it forces a TLB flush on all guest CPUs, to remove any stale TLB entries loaded from the old HPT. However, that situation can arise when the HPT is resizing as well - or even when switching from an RPT to HPT - so those cases need a TLB flush as well. So, move the TLB flush to trigger in all cases except for errors. Fixes: f98a8bf9 ("KVM: PPC: Book3S HV: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size") Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Serhii Popovych authored
commit 4ed11aee upstream. When serving multiple resize requests following could happen: CPU0 CPU1 ---- ---- kvm_vm_ioctl_resize_hpt_prepare(1); -> schedule_work() /* system_rq might be busy: delay */ kvm_vm_ioctl_resize_hpt_prepare(2); mutex_lock(); if (resize) { ... release_hpt_resize(); } ... resize_hpt_prepare_work() -> schedule_work() { mutex_unlock() /* resize->kvm could be wrong */ struct kvm *kvm = resize->kvm; mutex_lock(&kvm->lock); <<<< UAF ... } i.e. a second resize request with different order could be started by kvm_vm_ioctl_resize_hpt_prepare(), causing the previous request to be free()d when there's still an active worker thread which will try to access it. This leads to a use after free in point marked with UAF on the diagram above. To prevent this from happening, instead of unconditionally releasing a pre-existing resize structure from the prepare ioctl(), we check if the existing structure has an in-progress worker. We do that by checking if the resize->error == -EBUSY, which is safe because the resize->error field is protected by the kvm->lock. If there is an active worker, instead of releasing, we mark the structure as stale by unlinking it from kvm_struct. In the worker thread we check for a stale structure (with kvm->lock held), and in that case abort, releasing the stale structure ourself. We make the check both before and the actual allocation. Strictly, only the check afterwards is needed, the check before is an optimization: if the structure happens to become stale before the worker thread is dispatched, rather than during the allocation, it means we can avoid allocating then immediately freeing a potentially substantial amount of memory. This fixes following or similar host kernel crash message: [ 635.277361] Unable to handle kernel paging request for data at address 0x00000000 [ 635.277438] Faulting instruction address: 0xc00000000052f568 [ 635.277446] Oops: Kernel access of bad area, sig: 11 [#1] [ 635.277451] SMP NR_CPUS=2048 NUMA PowerNV [ 635.277470] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter nfsv3 nfs_acl nfs lockd grace fscache kvm_hv kvm rpcrdma sunrpc ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ext4 ib_srp scsi_transport_srp ib_ipoib mbcache jbd2 rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ocrdma(T) ib_core ses enclosure scsi_transport_sas sg shpchp leds_powernv ibmpowernv i2c_opal i2c_core powernv_rng ipmi_powernv ipmi_devintf ipmi_msghandler ip_tables xfs libcrc32c sr_mod sd_mod cdrom lpfc nvme_fc(T) nvme_fabrics nvme_core ipr nvmet_fc(T) tg3 nvmet libata be2net crc_t10dif crct10dif_generic scsi_transport_fc ptp scsi_tgt pps_core crct10dif_common dm_mirror dm_region_hash dm_log dm_mod [ 635.278687] CPU: 40 PID: 749 Comm: kworker/40:1 Tainted: G ------------ T 3.10.0.bz1510771+ #1 [ 635.278782] Workqueue: events resize_hpt_prepare_work [kvm_hv] [ 635.278851] task: c0000007e6840000 ti: c0000007e9180000 task.ti: c0000007e9180000 [ 635.278919] NIP: c00000000052f568 LR: c0000000009ea310 CTR: c0000000009ea4f0 [ 635.278988] REGS: c0000007e91837f0 TRAP: 0300 Tainted: G ------------ T (3.10.0.bz1510771+) [ 635.279077] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24002022 XER: 00000000 [ 635.279248] CFAR: c000000000009368 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1 GPR00: c0000000009ea310 c0000007e9183a70 c000000001250b00 c0000007e9183b10 GPR04: 0000000000000000 0000000000000000 c0000007e9183650 0000000000000000 GPR08: c0000007ffff7b80 00000000ffffffff 0000000080000028 d00000000d2529a0 GPR12: 0000000000002200 c000000007b56800 c000000000120028 c0000007f135bb40 GPR16: 0000000000000000 c000000005c1e018 c000000005c1e018 0000000000000000 GPR20: 0000000000000001 c0000000011bf778 0000000000000001 fffffffffffffef7 GPR24: 0000000000000000 c000000f1e262e50 0000000000000002 c0000007e9180000 GPR28: c000000f1e262e4c c000000f1e262e50 0000000000000000 c0000007e9183b10 [ 635.280149] NIP [c00000000052f568] __list_add+0x38/0x110 [ 635.280197] LR [c0000000009ea310] __mutex_lock_slowpath+0xe0/0x2c0 [ 635.280253] Call Trace: [ 635.280277] [c0000007e9183af0] [c0000000009ea310] __mutex_lock_slowpath+0xe0/0x2c0 [ 635.280356] [c0000007e9183b70] [c0000000009ea554] mutex_lock+0x64/0x70 [ 635.280426] [c0000007e9183ba0] [d00000000d24da04] resize_hpt_prepare_work+0xe4/0x1c0 [kvm_hv] [ 635.280507] [c0000007e9183c40] [c000000000113c0c] process_one_work+0x1dc/0x680 [ 635.280587] [c0000007e9183ce0] [c000000000114250] worker_thread+0x1a0/0x520 [ 635.280655] [c0000007e9183d80] [c00000000012010c] kthread+0xec/0x100 [ 635.280724] [c0000007e9183e30] [c00000000000a4b8] ret_from_kernel_thread+0x5c/0xa4 [ 635.280814] Instruction dump: [ 635.280880] 7c0802a6 fba1ffe8 fbc1fff0 7cbd2b78 fbe1fff8 7c9e2378 7c7f1b78 f8010010 [ 635.281099] f821ff81 e8a50008 7fa52040 40de00b8 <e8be0000> 7fbd2840 40de008c 7fbff040 [ 635.281324] ---[ end trace b628b73449719b9d ]--- Fixes: b5baa687 ("KVM: PPC: Book3S HV: KVM-HV HPT resizing implementation") Signed-off-by:
Serhii Popovych <spopovyc@redhat.com> [dwg: Replaced BUG_ON()s with WARN_ONs() and reworded commit message for clarity] Signed-off-by:
-
Serhii Popovych authored
commit 3073774e upstream. Currently the kvm_resize_hpt structure has two fields relevant to the state of an ongoing resize: 'prepare_done', which indicates whether the worker thread has completed or not, and 'error' which indicates whether it was successful or not. Since the success/failure isn't known until completion, this is confusingly redundant. This patch consolidates the information into just the 'error' value: -EBUSY indicates the worked is still in progress, other negative values indicate (completed) failure, 0 indicates successful completion. As a bonus this reduces size of struct kvm_resize_hpt by __alignof__(struct kvm_hpt_info) and saves few bytes of code. While there correct comment in struct kvm_resize_hpt which references a non-existent semaphore (leftover from an early draft). Assert with WARN_ON() in case of HPT allocation thread work runs more than once for resize request or resize_hpt_allocate() returns -EBUSY that is treated specially. Change comparison against zero to make checkpatch.pl happy. Signed-off-by:
-
Alexey Kardashevskiy authored
commit 6c7d47c3 upstream. Commit 96df2267 ("KVM: PPC: Book3S PR: Preserve storage control bits") added code to preserve WIMG bits but it missed 2 special cases: - a magic page in kvmppc_mmu_book3s_64_xlate() and - guest real mode in kvmppc_handle_pagefault(). For these ptes, WIMG was 0 and pHyp failed on these causing a guest to stop in the very beginning at NIP=0x100 (due to bd9166ff "KVM: PPC: Book3S PR: Exit KVM on failed mapping"). According to LoPAPR v1.1 14.5.4.1.2 H_ENTER: The hypervisor checks that the WIMG bits within the PTE are appropriate for the physical page number else H_Parameter return. (For System Memory pages WIMG=0010, or, 1110 if the SAO option is enabled, and for IO pages WIMG=01**.) This hence initializes WIMG to non-zero value HPTE_R_M (0x10), as expected by pHyp. [paulus@ozlabs.org - fix compile for 32-bit] Fixes: 96df2267 "KVM: PPC: Book3S PR: Preserve storage control bits" Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by:
Ruediger Oertel <ro@suse.de> Reviewed-by:
Greg Kurz <groug@kaod.org> Tested-by:
-
Andrew Honig authored
commit 75f139aa upstream. This adds a memory barrier when performing a lookup into the vmcs_field_to_offset_table. This is related to CVE-2017-5753. Signed-off-by:
Andrew Honig <ahonig@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jia Zhang authored
commit b94b7373 upstream. Instead of blacklisting all model 79 CPUs when attempting a late microcode loading, limit that only to CPUs with microcode revisions < 0x0b000021 because only on those late loading may cause a system hang. For such processors either: a) a BIOS update which might contain a newer microcode revision or b) the early microcode loading method should be considered. Processors with revisions 0x0b000021 or higher will not experience such hangs. For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. [ bp: Heavily massage commit message and pr_* statements. ] Fixes: 723f2828 ("x86/microcode/intel: Disable late loading on model 79") Signed-off-by:
Jia Zhang <qianyue.zj@alibaba-inc.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/1514772287-92959-1-git-send-email-qianyue.zj@alibaba-inc.comSigned-off-by:
-
Emmanuel Grumbach authored
commit 943309d4 upstream. 22000 devices (previously referenced as A000) can support short transmit queues. This means that we have less DMA descriptors (TFD) for those shorter queues. Previous devices must still have 256 TFDs for each queue even if those 256 TFDs point to fewer buffers. When I introduced support for the short queues for 22000 I broke older devices by assuming that they can also have less TFDs in their queues. This led to several problems: 1) the payload of the commands weren't unmapped properly which caused the SWIOTLB to complain at some point. 2) the hardware could get confused and we get hardware crashes. The corresponding bugzilla entries are: https://bugzilla.kernel.org/show_bug.cgi?id=198201 https://bugzilla.kernel.org/show_bug.cgi?id=198265 Fixes: 4ecab561 ("iwlwifi: pcie: support short Tx queues for A000 device family") Reviewed-by:
Sharon, Sara <sara.sharon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Ilya Dryomov authored
commit 21acdf45 upstream. Commit d3834fef ("rbd: bump queue_max_segments") bumped max_segments (unsigned short) to max_hw_sectors (unsigned int). max_hw_sectors is set to the number of 512-byte sectors in an object and overflows unsigned short for 32M (largest possible) objects, making the block layer resort to handing us single segment (i.e. single page or even smaller) bios in that case. Fixes: d3834fef ("rbd: bump queue_max_segments") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
