- 23 May, 2018 40 commits
-
-
Michal Vokáč authored
Add support for the four-port variant of the Qualcomm QCA833x switch. Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Vokáč authored
Add support for the four-port variant of the Qualcomm QCA833x switch. The CPU port default link settings can be reconfigured using a fixed-link sub-node. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Ganesh Goudar authored
Add 0x6088 and 0x6089 device ids for new T6 cards. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Christian Brauner authored
Recent discussions around uevent filtering (cf. net-next commit [1], [2], and [3] and discussions in [4], [5], and [6]) have shown that the semantics around uevent filtering where not well understood. Now that we have settled - at least for the moment - how uevent filtering should look like let's add some selftests to ensure we don't regress anything in the future. Note, the semantics of uevent filtering are described in detail in my commit message to [2] so I won't repeat them here. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=90d52d4fd82007005125d9a8d2d560a1ca059b9d [2]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a3498436b3a0f8ec289e6847e1de40b4123e1639 [3]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=26045a7b14bc7a5455e411d820110f66557d6589 [4]: https://lkml.org/lkml/2018/4/4/739 [5]: https://lkml.org/lkml/2018/4/26/767 [6]: https://lkml.org/lkml/2018/4/26/738Signed-off-by:
Christian Brauner <christian@brauner.io> Signed-off-by:
-
David S. Miller authored
Roopa Prabhu says: ==================== fib rule selftest This series adds a new test to test fib rules. ip route get is used to test fib rule matches. This series also extends ip route get to match on sport and dport to test recent support of sport and dport fib rule match. v2 - address ido's commemt to make sport dport ip route get to work correctly for input route get. I don't support ip route get on ip-proto match yet. ip route get creates a udp packet and i have left it at that. We could extend ip route get to support a few ip proto matches in followup patches. v3 - Support ip_proto (only tcp and udp) match in getroute. dropped printing of new match attrs in ip route get, because ipv6 does not print it. And ipv6 currrently shares the dump api with ipv6 notify and its better to not add them to the notify api. dropped it to keep the api consistent between ipv4 and ipv6 (though uid is already printed in the ipv4 case). If we need it, both ipv4 and ipv6 can be enhanced to provide a separate get api. Moved skb creation for ipv4 to a separate func. v4 - drop separate skb for netlink and fix concerns around rcu and netlink reply (as pointed out by DaveM). I now try to reset the skb after the route lookup and before the netlink send (testing shows this is ok. More eyes and any feedback here will be helpful) v5 - dropped RTA_TABLE ipv4_rtm_policy update from this series and posted it separately for net (feedback from Eric) ==================== Signed-off-by: -
Roopa Prabhu authored
This adds a first set of tests for fib rule match/action for ipv4 and ipv6. Initial tests only cover action lookup table. can be extended to cover other actions in the future. Uses ip route get to validate the rule lookup. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
This is a followup to fib6 rules sport, dport and ipproto match support. Only supports tcp, udp and icmp for ipproto. Used by fib rule self tests. Signed-off-by:
-
Roopa Prabhu authored
This is a followup to fib rules sport, dport and ipproto match support. Only supports tcp, udp and icmp for ipproto. Used by fib rule self tests. Signed-off-by:
-
Haiyang Zhang authored
The handlers for ethtool get/set msg level are missing from netvsc. This patch adds them. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Colin Ian King authored
Rename VXGE_HW_ERR_PRIVILAGED_OPEARATION to VXGE_HW_ERR_PRIVILEGED_OPERATION to fix spelling mistake. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Willem de Bruijn says: ==================== udp gso fixes A few small fixes: - disallow segmentation with XFRM - do not leak gso packets into the ingress path Changes v1 -> v2 - fix build failure in team.c - drop scatter-gather fix: this is now fixed by commit 113f99c3 ("net: test tailroom before appending to linear skb"). After this patch gso skbs are built non-linear regardless of NETIF_F_SG and skb_segment builds linear segs. ==================== Signed-off-by: -
Willem de Bruijn authored
Until the udp receive stack supports large packets (UDP GRO), GSO packets must not loop from the egress to the ingress path. Revert the change that added NETIF_F_GSO_UDP_L4 to various virtual devices through NETIF_F_GSO_ENCAP_ALL as this included devices that may loop packets, such as veth and macvlan. Instead add it to specific devices that forward to another device's egress path, bonding and team. Fixes: 83aa025f ("udp: add gso support to virtual devices") CC: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
UDP GSO delays final datagram construction to the GSO layer. This conflicts with protocol transformations. Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: sfp: small improvements A small series of patches improving the SFP support by adding a warning when no Tx disable pin is available, and making the i2c-bus property mandatory. Thanks! Antoine Since v1: - Removed the patch fixing the sfp driver when no i2c bus was described. - Made two new patches to make the i2c-bus property mandatory for sfp modules. Since the phylink series: - s/-EOPNOTSUPP/-ENODEV/ in patch 1/2. - I added the acked-by tag in patch 2/2. ==================== Signed-off-by: -
Antoine Tenart authored
The i2c-bus property for sfp modules was made mandatory. Update the documentation to keep it in sync with the driver's behaviour. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Antoine Tenart authored
This patch makes the i2c-bus property mandatory when using a device tree. If the sfp i2c bus isn't described it's impossible to guess the protocol to use for a given module, and the sfp module would then not work in most cases. Signed-off-by:
-
Antoine Tenart authored
In case no Tx disable pin is available the SFP modules will always be emitting. This could be an issue when using modules using laser as their light source as we would have no way to disable it when the fiber is removed. This patch adds a warning when registering an SFP cage which do not have its tx_disable pin wired or available. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: abm: add basic support for advanced buffering NIC This series lays groundwork for advanced buffer management NIC feature. It makes necessary NFP core changes, spawns representors and adds devlink glue. Following series will add the actual buffering configuration (patch series size limit). First three patches add support for configuring NFP buffer pools via a mailbox. The existing devlink APIs are used for the purpose. Third patch allows us to perform small reads from the NFP memory. The rest of the patch set adds eswitch mode change support and makes the driver spawn appropriate representors. ==================== Signed-off-by: -
Jakub Kicinski authored
When NFP is modelled as a switch we assign phys_port_name to respective port(representor )s: vNIC0 - | - PF port (pf%d) MAC/PHY (p%d[s%d]) - |E== In most cases there is only one vNIC for communication with the switch. If there is more than one we need to be able to identify them. Use %d as phys_port_name of the vNICs. We don't have to pass ID to nfp_net_debugfs_vnic_add() separately any more. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
PCI PFs can host more than one logical endpoint. In NFP terms this means having more than one vNIC for PCIe PF. The vNICs are usually corresponding 1:1 to Ethernet ports. In core NIC we use the legacy idea of vNIC *being* the Ethernet port, hence netdevs put pX(sY) in their phys_port_name, like Ethernet ports would. When ASIC ports are fully represented we need to be able to name different PCIe PF ports, too. Use a scheme similar to Ethernet ports - pfXsY, for PCIe PF number X, sub-port Y. Signed-off-by:
-
Jakub Kicinski authored
Current control firmware does not cater too well to multi-host applications. There is no way to check which hosts are up or otherwise negotiate what the state of the external port (the Ethernet port) should be. Make sure the link is up when driver loads, and don't take it down when Ethernet port netdev is closed. Signed-off-by:
-
Jakub Kicinski authored
To configure buffering points we need full set of netdevs: ASIC user netdev -- | -- PCIe port MAC port -- | -- Configuring egrees qdiscs on user netdev configures standard Linux TC software qdiscs, configuring PCIe port qdiscs will provide a way of setting ASIC queuing parameters for PCIe block. MAC port netdev egress qdiscs correspond to ASIC MAC Traffic Manager block. Signed-off-by: -
Jakub Kicinski authored
Our previous apps all assumed to use only one eswitch mode (legacy or switchdev) without the ability to change it. ABM NIC will want to support the switch so plumb devlink_eswitch_mode_set through. The devlink_eswitch_mode_set is expected to spawn representors and potentially devlink ports so it's called under big devlink lock and pf->lock. Signed-off-by:
-
Jakub Kicinski authored
Changing switch mode may want to register and unregister devlink ports. Therefore similarly to DEVLINK_CMD_PORT_SPLIT/UNSPLIT it should not take the instance lock. Drivers don't depend on existing locking since it's a very recent addition. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
nfp_apps can currently associate their structures with vNICs but not representors. Add app priv pointer to representors as well. Signed-off-by:
-
Jakub Kicinski authored
ABM NIC requires more complex vNIC handling, allocate per-vNIC structure. Find out RX queue base and PCI PF id. There will be multiple PFs sharing the same MAC port, therefore the MAC address assigned to the vNIC must be looked up in the HWInfo database. Signed-off-by:
-
Jakub Kicinski authored
Add a very rudimentary active buffer management NIC support. For now it's like a core NIC without SR-IOV support. Next commits will extend its functionality. Signed-off-by:
-
Jakub Kicinski authored
Current code doesn't enforce length requirements on 32bit accesses with action NFP_CPP_ACTION_RW to memory units, but if the access is only aligned to 4 bytes as well we will fall into the explicit access case and error out. Such accesses are correct, allow them by lowering the width earlier. While at it use a switch statement to improve readability. Signed-off-by:
-
Jakub Kicinski authored
Allow app FW to advertise its shared buffer pool information. Use the per-PF mailbox to configure them from devlink. Signed-off-by:
-
Jakub Kicinski authored
When working with devlink-related functionality for locking reasons it's easier to create a new mailbox per-PCI PF device than try to use one of the netdev/vNIC mailboxes. Define new mailbox structure and resolve its symbol during probe. For forward compatibility allow silent truncation of mailbox command data. Signed-off-by:
-
Jakub Kicinski authored
nfp_net_pf_rtsym_read_optional() and nfp_net_pf_map_rtsym() are not really related to networking code. Move them to the PF code and remove the net from their names. They will soon be needed by code outside of nfp_net_main.c anyway. Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpfilter v2->v3: - followed Luis's suggestion and significantly simplied first patch with shmem_kernel_file_setup+kernel_write. Added kdoc for new helper - fixed typos and race to access pipes with mutex - tested with bpfilter being 'builtin'. CONFIG_BPFILTER_UMH=y|m both work. Interesting to see a usermode executable being embedded inside vmlinux. - it doesn't hurt to enable bpfilter in .config. ip_setsockopt commands sent to usermode via pipes and -ENOPROTOOPT is returned from userspace, so kernel falls back to original iptables code v1->v2: this patch set is almost a full rewrite of the earlier umh modules approach The v1 of patches and follow up discussion was covered by LWN: https://lwn.net/Articles/749108/ I believe the v2 addresses all issues brought up by Andy and others. Mainly there are zero changes to kernel/module.c Instead of teaching module loading logic to recognize special umh module, let normal kernel modules execute part of its own .init.rodata as a new user space process (Andy's idea) Patch 1 introduces this new helper: int fork_usermode_blob(void *data, size_t len, struct umh_info *info); Input: data + len == executable file Output: struct umh_info { struct file *pipe_to_umh; struct file *pipe_from_umh; pid_t pid; }; Advantages vs v1: - the embedded user mode executable is stored as .init.rodata inside normal kernel module. These pages are freed when .ko finishes loading - the elf file is copied into tmpfs file. The user mode process is swappable. - the communication between user mode process and 'parent' kernel module is done via two unix pipes, hence protocol is not exposed to user space - impossible to launch umh on its own (that was the main issue of v1) and impossible to be man-in-the-middle due to pipes - bpfilter.ko consists of tiny kernel part that passes the data between kernel and umh via pipes and much bigger umh part that doing all the work - 'lsmod' shows bpfilter.ko as usual. 'rmmod bpfilter' removes kernel module and kills corresponding umh - signed bpfilter.ko covers the whole image including umh code Few issues: - the user can still attach to the process and debug it with 'gdb /proc/pid/exe pid', but 'gdb -p pid' doesn't work. (a bit worse comparing to v1) - tinyconfig will notice a small increase in .text +766 | TEXT | 7c8b94806bec umh: introduce fork_usermode_blob() helper ==================== Signed-off-by:
-
Alexei Starovoitov authored
bpfilter.ko consists of bpfilter_kern.c (normal kernel module code) and user mode helper code that is embedded into bpfilter.ko The steps to build bpfilter.ko are the following: - main.c is compiled by HOSTCC into the bpfilter_umh elf executable file - with quite a bit of objcopy and Makefile magic the bpfilter_umh elf file is converted into bpfilter_umh.o object file with _binary_net_bpfilter_bpfilter_umh_start and _end symbols Example: $ nm ./bld_x64/net/bpfilter/bpfilter_umh.o 0000000000004cf8 T _binary_net_bpfilter_bpfilter_umh_end 0000000000004cf8 A _binary_net_bpfilter_bpfilter_umh_size 0000000000000000 T _binary_net_bpfilter_bpfilter_umh_start - bpfilter_umh.o and bpfilter_kern.o are linked together into bpfilter.ko bpfilter_kern.c is a normal kernel module code that calls the fork_usermode_blob() helper to execute part of its own data as a user mode process. Notice that _binary_net_bpfilter_bpfilter_umh_start - end is placed into .init.rodata section, so it's freed as soon as __init function of bpfilter.ko is finished. As part of __init the bpfilter.ko does first request/reply action via two unix pipe provided by fork_usermode_blob() helper to make sure that umh is healthy. If not it will kill it via pid. Later bpfilter_process_sockopt() will be called from bpfilter hooks in get/setsockopt() to pass iptable commands into umh via bpfilter.ko If admin does 'rmmod bpfilter' the __exit code bpfilter.ko will kill umh as well. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
Introduce helper: int fork_usermode_blob(void *data, size_t len, struct umh_info *info); struct umh_info { struct file *pipe_to_umh; struct file *pipe_from_umh; pid_t pid; }; that GPLed kernel modules (signed or unsigned) can use it to execute part of its own data as swappable user mode process. The kernel will do: - allocate a unique file in tmpfs - populate that file with [data, data + len] bytes - user-mode-helper code will do_execve that file and, before the process starts, the kernel will create two unix pipes for bidirectional communication between kernel module and umh - close tmpfs file, effectively deleting it - the fork_usermode_blob will return zero on success and populate 'struct umh_info' with two unix pipes and the pid of the user process As the first step in the development of the bpfilter project the fork_usermode_blob() helper is introduced to allow user mode code to be invoked from a kernel module. The idea is that user mode code plus normal kernel module code are built as part of the kernel build and installed as traditional kernel module into distro specified location, such that from a distribution point of view, there is no difference between regular kernel modules and kernel modules + umh code. Such modules can be signed, modprobed, rmmod, etc. The use of this new helper by a kernel module doesn't make it any special from kernel and user space tooling point of view. Such approach enables kernel to delegate functionality traditionally done by the kernel modules into the user space processes (either root or !root) and reduces security attack surface of the new code. The buggy umh code would crash the user process, but not the kernel. Another advantage is that umh code of the kernel module can be debugged and tested out of user space (e.g. opening the possibility to run clang sanitizers, fuzzers or user space test suites on the umh code). In case of the bpfilter project such architecture allows complex control plane to be done in the user space while bpf based data plane stays in the kernel. Since umh can crash, can be oom-ed by the kernel, killed by the admin, the kernel module that uses them (like bpfilter) needs to manage life time of umh on its own via two unix pipes and the pid of umh. The exit code of such kernel module should kill the umh it started, so that rmmod of the kernel module will cleanup the corresponding umh. Just like if the kernel module does kmalloc() it should kfree() it in the exit code. Signed-off-by: -
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed*: Add support for management firmware TLV request. Management firmware (MFW) requires config and state information from the driver. It queries this via TLV (type-length-value) request wherein mfw specificies the list of required TLVs. Driver fills the TLV data and responds back to MFW. This patch series adds qed/qede/qedf/qedi driver implementation for supporting the TLV queries from MFW. Changes from previous versions: ------------------------------- v2: Split patch (2) into multiple simpler patches. v2: Update qed_tlv_parsed_buf->p_val datatype to void pointer to avoid bunch of unnecessary typecasts. Please consider applying this series to "net-next". ==================== Signed-off-by: -
Manish Rangankar authored
Signed-off-by:
Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by:
-
Manish Rangankar authored
This patch adds callbacks for providing the ethernet protocol driver TLVs. Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Chad Dupuis authored
This patch adds callbacks for providing the ethernet protocol driver TLVs. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
This patch adds callbacks for providing the ethernet protocol driver TLVs. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
