- 27 Jun, 2019 6 commits
-
-
Daniel Vetter authored
The crc core code can cope with some late crc, the race is kinda unavoidable. So no need to flush pending workers, they'll complete in time. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Tested-by:
-
Daniel Vetter authored
Currently, we flush pending CRC workers very late in the commit flow, when we destroy all the old crtc states. Unfortunately, at that point, the framebuffers are already unpinned (and our vaddr possible gone), so this isn't good. Also, the plane_states we need might also already be cleaned up, since cleanup order of state structures isn't well defined. Fix this by waiting for all CRC workers of the old state to complete before we start any of the cleanup work. For correct ordering and avoiding races, we can only flush_work after drm_atomic_helper_wait_for_vblanks() since we know that all subsequent queue_work will be for the new state. Only once that's done is flush_work() useful, before that we might flush the work, and then right after the hrtimer that simulates vblank queues it again. Every time you have a flush_work before cleaning up the work structure, the following sequence must be obeyed, or it can go wrong: 1. Make sure no one else can re-queue the work anymore (in our case that's done by a combination of first updating output->crc_state and then waiting for the vblank to pass to make sure the hrtimer has noticed that change). 2. flush_work() 3. Actually clean up stuff (which isn't done here). Doing the flush_work before we even completed the output->state update, much less waited for the vblank to make sure that's happened, missed the point. Note that this is not yet race-free because of the hrtimer and crc worker look at the wrong state pointers, but that will be fixed in subsequent patches. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
Just prep work, more will be done here in following patches. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
Plus add a comment about what it actually protects. It's very little. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
The worker is always in process context, no need for the _irqsafe version. Same for the set_source callback, that's only called from the debugfs handler in a syscall. Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
The issue we have is that the crc worker might fall behind. We've tried to handle this by tracking both the earliest frame for which it still needs to compute a crc, and the last one. Plus when the crtc_state changes, we have a new work item, which are all run in order due to the ordered workqueue we allocate for each vkms crtc. Trouble is there's been a few small issues in the current code: - we need to capture frame_end in the vblank hrtimer, not in the worker. The worker might run much later, and then we generate a lot of crc for which there's already a different worker queued up. - frame number might be 0, so create a new crc_pending boolean to track this without confusion. - we need to atomically grab frame_start/end and clear it, so do that all in one go. This is not going to create a new race, because if we race with the hrtimer then our work will be re-run. - only race that can happen is the following: 1. worker starts 2. hrtimer runs and updates frame_end 3. worker grabs frame_start/end, already reading the new frame_end, and clears crc_pending 4. hrtimer calls queue_work() 5. worker completes 6. worker gets re-run, crc_pending is false Explain this case a bit better by rewording the comment. v2: Demote warning level output to debug when we fail to requeue, this is expected under high load when the crc worker can't quite keep up. Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
- 26 Jun, 2019 34 commits
-
-
Chris Wilson authored
We gracefully handle the caller specifying a zero range, so don't force them to special case that condition if it naturally falls out of their setup. What we don't check is if the end < start, so keep that as an assert for an illegal call. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190626094330.3556-1-chris@chris-wilson.co.uk
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-12-emil.l.velikov@gmail.com
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Note: the outstanding DRM_AUTH instance is: - (badly coped) legacy DRI1 ioctl, which is a noop Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-9-emil.l.velikov@gmail.com
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Note: the outstanding DRM_AUTH instance is: - legacy DRI1 ioctl, which is already neutered Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-8-emil.l.velikov@gmail.com
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: freedreno@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: Qiang Yu <yuq825@gmail.com> Cc: lima@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-6-emil.l.velikov@gmail.com
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-4-emil.l.velikov@gmail.com
-
Emil Velikov authored
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-3-emil.l.velikov@gmail.com
-
Emil Velikov authored
Currently vmw_execbuf_ioctl() open-codes the permission checking, size extending and copying that is already done in core drm. Kill all the duplication, adding a few comments for clarity. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Emil Velikov authored
According to the docs - prevents firstopen/lastclose races. Yet never used in practise. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Core DRM is safe when the callback is NULL. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by:
-
Emil Velikov authored
DRM_UNLOCKED doesn't do anything for non-legacy drivers. Remove it. Cc: intel-gfx@lists.freedesktop.org Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190522154702.16269-3-emil.l.velikov@gmail.com
-
Emil Velikov authored
DRM_UNLOCKED doesn't do anything for non-legacy drivers. Remove it. Cc: Thierry Reding <treding@nvidia.com> Cc: linux-tegra@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190522154702.16269-1-emil.l.velikov@gmail.com
-
Jerry Han authored
The Boe Himax8279d is a 8.0" panel with a 1200x1920 resolution and connected to DSI using four lanes. V8: - Modify communication address V7: - Add the information of the reviewer V6: - Add the information of the reviewer V5: - Added changelog V4: - None V3: - None V2: - Add compatible device "boe,himax8279d10p" (Sam) - Add the necessary property descriptions (Sam) Signed-off-by:
Jerry Han <jerry.han.hq@gmail.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Derek Basehore <dbasehore@chromium.org> Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Rock wang <rock_wang@himax.com.cn> Signed-off-by:
-
Marek Vasut authored
The ETM0700G0DH6 is currently documented as using edt,etm070080dh6 compatible string, however the Linux kernel driver as well as a couple of DTs use edt,etm0700g0dh6 compatible string. Add it into the documentation. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Jan Tuerk <jan.tuerk@emtrion.com> Cc: Thierry Reding <treding@nvidia.com> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Reviewed-by:
-
Guido Günther authored
Allow to specify regulators for vcc and iovcc. According to the data sheet the panel wants vcc (2.8V) and iovcc (1.8V) and there's no startup dependency between the two. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
-
Guido Günther authored
Document the vcc-supply and iovcc-supply properties of the Rocktech jh057n00900 panel. Signed-off-by:
-
Guido Günther authored
0xBF isn't in any ST7703 data sheet so mark it as unknown. This avoids confusion on whether there is a missing command in that dsi_generic_write_seq() call. Signed-off-by:
-
Guido Günther authored
Add a mail alias as reviewer for the rocktech jh057n00900 panel driver. Signed-off-by:
-
Robert Chiras authored
This patch adds Raydium RM67191 TFT LCD panel driver (MIPI-DSI protocol). Signed-off-by:
Robert Chiras <robert.chiras@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Robert Chiras authored
Add dt-bindings documentation for Raydium RM67191 DSI panel. Signed-off-by:
-
Paul Cercueil authored
The Sharp LS020B1DD01D is a simple 2.0" 240x160 16-bit TFT panel. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Artur Rojek <contact@artur-rojek.eu> Reviewed-by:
-
Paul Cercueil authored
Add the DRM_BUS_FLAG_SHARP_SIGNALS to the drm_bus_flags enum. This flags can be used when the display must be driven with the Sharp-specific signals SPL, CLS, REV, PS. Signed-off-by:
-
Paul Cercueil authored
The LS020B1DD01D is a 2.0" 240x160 16-bit TFT LCD panel. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Paul Cercueil authored
Add support for display panels built around the Novatek NT39016 display controller, as found on e.g. the King Display KD035G6-54NT 24-bit 320x240 3.5" LCD panel which equips the GCW Zero open-source handheld gaming console. Signed-off-by:
Maarten ter Huurne <maarten@treewalker.org> Reviewed-by:
-
Paul Cercueil authored
The KD035G6-54NT is a 3.5" 320x240 24-bit TFT LCD panel. Signed-off-by:
-
Neil Armstrong authored
Add myself as co-maintainer of DRM Bridge Drivers then add Jonas Karlman and Jernej Škrabec as Reviewers of DRM Bridge Drivers. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Jernej Škrabec <jernej.skrabec@siol.net> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by:
Jonas Karlman <jonas@kwiboo.se> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190624090851.17859-1-narmstrong@baylibre.com
-
H. Nikolaus Schaller authored
The change adds support for the Ortustech COM37H3M05DTC/99DTC 3.7" TFT LCD panel. Tested on Letux3704. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by:
-
H. Nikolaus Schaller authored
The change adds support for the Sharp LQ070Y3DG3B 7.0" TFT LCD panel. Tested on Letux7004. Signed-off-by:
-
H. Nikolaus Schaller authored
Signed-off-by:
-
H. Nikolaus Schaller authored
Signed-off-by:
-
H. Nikolaus Schaller authored
Signed-off-by:
-
