- 11 Feb, 2016 40 commits
-
-
David S. Miller authored
Nikolay Borisov says: ==================== Make igmp sysctl knobs namespace aware This series continue making more of the net related sysctls namespace aware. The first 2 and last patches are straight forward and convert sysctls which weren't defined to be namespace aware. The only thing in them is that each removes a define which is used in only one place (to initialise the respective sysctl) so I don't think this is a huge loss. The third patch however, converts igmp_llm_reports which was already defined in the ipv4_net_table but wasn't using any of the net namespace infrastructure. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Borisov authored
Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Borisov authored
This was initially introduced in df2cf4a7 ("IGMP: Inhibit reports for local multicast groups") by defining the sysctl in the ipv4_net_table array, however it was never implemented to be namespace aware. Fix this by changing the code accordingly. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Borisov authored
Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Borisov authored
Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zhang Shengju authored
Replace 'goto' with 'return' to remove unnecessary check at label: err_undo_flags. The reason is that 'err_undo_flags' do two things for the first slave device: 1.revert bond mac address if it is set by the slave device. 2.revert bond device type if it's not ARPHRD_ETHER. It's not necessary for the following three places, they changed neither bond mac address nor type. It's straightforward to return directly. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergio Prado authored
Tested on Acqua A5 SoM (http://www.acmesystems.it/acqua). Signed-off-by:
Sergio Prado <sergio.prado@e-labworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amitoj Kaur Chawla authored
32 bit systems using 'struct timeval' will break in the year 2038, so we replace the code appropriately. However, this driver is not broken in 2038 since we are only using microseconds portion of the time. This patch replaces 'struct timeval' with 'struct timespec64'. We only need to find elapsed microseconds rather than absolute time, so it's better to use monotonic time, so using ktime_get_ts64() makes the code more efficient and more robust against concurrent settimeofday() calls. Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tycho Andersen authored
Operations with the GENL_ADMIN_PERM flag fail permissions checks because this flag means we call netlink_capable, which uses the init user ns. Instead, let's introduce a new flag, GENL_UNS_ADMIN_PERM for operations which should be allowed inside a user namespace. The motivation for this is to be able to run openvswitch in unprivileged containers. I've tested this and it seems to work, but I really have no idea about the security consequences of this patch, so thoughts would be much appreciated. v2: use the GENL_UNS_ADMIN_PERM flag instead of a check in each function v3: use separate ifs for UNS_ADMIN_PERM and ADMIN_PERM, instead of one massive one Reported-by:
James Page <james.page@canonical.com> Signed-off-by:
Tycho Andersen <tycho.andersen@canonical.com> CC: Eric Biederman <ebiederm@xmission.com> CC: Pravin Shelar <pshelar@ovn.org> CC: Justin Pettit <jpettit@nicira.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
Many virtual and not quite virtual devices allow any speed to be set through ethtool. In particular, this applies to the virtio-net devices. Document this fact to make sure people don't assume the enum lists all possible values. Reserve values greater than INT_MAX for future extension and to avoid conflict with SPEED_UNKNOWN. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Duplicate include detected. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amitoj Kaur Chawla authored
The return value of kzalloc on failure of allocation of memory should be -ENOMEM and not -1. Found using Coccinelle. A simplified version of the semantic patch used is: //<smpl> @@ expression *e; @@ e = kzalloc(...); if (e == NULL) { ... return - -1 + -ENOMEM ; } //</smpl> The single call site only checks that the return value is not 0, hence no change is required at the call site. Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alexander Duyck says: ==================== Add GSO support for outer checksum w/ inner checksum offloads This patch series updates the existing segmentation offload code for tunnels to make better use of existing and updated GSO checksum computation. This is done primarily through two mechanisms. First we maintain a separate checksum in the GSO context block of the sk_buff. This allows us to maintain two checksum values, one offloaded with values stored in csum_start and csum_offset, and one computed and tracked in SKB_GSO_CB(skb)->csum. By maintaining these two values we are able to take advantage of the same sort of math used in local checksum offload so that we can provide both inner and outer checksums with minimal overhead. Below is the performance for a netperf session between an ixgbe PF and VF on the same host but in different namespaces. As can be seen a significant gain in performance can be had from allowing the use of Tx checksum offload on the inner headers while performing a software offload on the outer header computation: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 12844.38 9.30 -1.00 0.712 -1.00 After: 87380 16384 16384 10.00 13216.63 6.78 -1.00 0.504 -1.000 Changes from v1: * Dropped use of CHECKSUM_UNNECESSARY for remote checksum offload * Left encap_hdr_csum as it will likely be needed in future for SCTP GSO * Broke the changes out over many more patches * Updated GRE segmentation to more closely match UDP tunnel segmentation ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch enables us to use inner checksum offloads if provided by hardware with outer checksums computed by software. It basically reduces encap_hdr_csum to an advisory flag for now, but based on the fact that SCTP may be getting segmentation support before long I thought we may want to keep it as it is possible we may need to support CRC32c and 1's compliment checksum in the same packet at some point in the future. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
The segmentation code was having to do a bunch of work to pull the skb->len and strip the udp header offset before the value could be used to adjust the checksum. Instead of doing all this work we can just use the value that goes into uh->len since that is the correct value with the correct byte order that we need anyway. By using this value we can save ourselves a bunch of pain as there is no need to do multiple byte swaps. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch goes though and cleans up the logic related to several of the control flags used in UDP segmentation. Specifically the use of dont_encap isn't really needed as we can just check the skb for CHECKSUM_PARTIAL and if it isn't set then we don't need to update the internal headers. As such we can just drop that value. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
Instead of parsing headers to determine the inner protocol we can just pull the value from inner_proto. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch updates the gre checksum path to follow something much closer to the UDP checksum path. By doing this we can avoid needing to do as much header inspection and can just make use of the fields we were already reading in the sk_buff structure. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
The call skb_has_shared_frag is used in the GRE path and skb_checksum_help to verify that no frags can be modified by an external entity. This check really doesn't belong in the GRE path but in the skb_segment function itself. This way any protocol that might be segmented will be performing this check before attempting to offload a checksum to software. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch makes it so that we can offload the checksums for a packet up to a certain point and then begin computing the checksums via software. Setting this up is fairly straight forward as all we need to do is reset the values stored in csum and csum_start for the GSO context block. One complication for this is remote checksum offload. In order to allow the inner checksums to be offloaded while computing the outer checksum manually we needed to have some way of indicating that the offload wasn't real. In order to do that I replaced CHECKSUM_PARTIAL with CHECKSUM_UNNECESSARY in the case of us computing checksums for the outer header while skipping computing checksums for the inner headers. We clean up the ip_summed flag and set it to either CHECKSUM_PARTIAL or CHECKSUM_NONE once we hand the packet off to the next lower level. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch addresses two main issues. First in the case of remote checksum offload we were avoiding dealing with scatter-gather issues. As a result it would be possible to assemble a series of frames that used frags instead of being linearized as they should have if remote checksum offload was enabled. Second I have updated the code so that we now let GSO take care of doing the checksum on the data itself and drop the special case that was added for remote checksum offload. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch moves the checksum maintained by GSO out of skb->csum and into the GSO context block in order to allow for us to work on outer checksums while maintaining the inner checksum offsets in the case of the inner checksum being offloaded, while the outer checksums will be computed. While updating the code I also did a minor cleanu-up on gso_make_checksum. The change is mostly to make it so that we store the values and compute the checksum instead of computing the checksum and then storing the values we needed to update. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
The enc_features variable isn't necessary since features isn't used anywhere after we create enc_features so instead just use a destructive AND on features itself and save ourselves the variable declaration. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
sixiao@microsoft.com authored
1. Adding NETIF_F_TSO6 feature flag; 2. Adding NETIF_F_HW_CSUM. NETIF_F_IPV6_CSUM and NETIF_F_IP_CSUM are being deprecated; 3. Cleanup the coding style of flag assignment by using macro. Signed-off-by:
Simon Xiao <sixiao@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Edward Cree says: ==================== IPv6 NFC This series adds support for steering IPv6 flows using the ethtool NFC interface, and implements it for sfc devices. Tested using an in-development patch to the ethtool utility. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Reviewed-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Reviewed-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== Add TOS support and some cleanup This series adds TOS support for iWARP and also does some cleanup to make code more readable. Patch series is created against infiniband tree and includes patches on iw_cxgb4 and cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
This series provides support for iWARP applications to specify a TOS value and have that map to a VLAN Priority for iw_cxgb4 iWARP connections. In iw_cxgb4, when allocating an L2T entry, pass the skb_priority based on the tos value in the cm_id. Also pass the correct tos value during connection setup so the passive side gets the client's desired tos. When sending the FLOWC work request to FW, if the egress device is in a vlan, then use the vlan priority bits as the scheduling class. This allows associating RDMA connections with scheduling classes to provide traffic shaping per flow. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Don't log errors if a listening endpoint is going away when procesing a PASS_ACCEPT_REQ message. This can happen. Change the error printk to a PDBG() debug log entry Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Rename local mm* variables to more meaningful names Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Troy Kisky says: ==================== net: fec: cleanup/fixes V2 is a rebase on top of johannes endian-safe patch and is only the 1st eight patches. The testing for this series was done on a nitrogen6x. The base commit was commit b45efa30 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Testing showed no change in performance. Testing used imx_v6_v7_defconfig + CONFIG_MICREL_PHY. The processor was running at 996Mhz. The following commands were used to get the transfer rates. On an x86 ubunto system, iperf -s -i.5 -u On a nitrogen6x board, running via SD Card. I first stopped some background processes stop cron stop upstart-file-bridge stop upstart-socket-bridge stop upstart-udev-bridge stop rsyslog stop dbus killall dhclient echo performance >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor taskset 0x2 iperf -c 192.168.0.201 -u -t60 -b500M -r There is a branch available on github with this series, and the rest of my fec patches, for those who would like to test it. https://github.com:boundarydevices/linux-imx6.git branch net-next_master ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Troy Kisky authored
Unmap initial buffer on error. Don't free skb until it has been unmapped. Move cbd_bufaddr assignment closer to the mapping function. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Troy Kisky authored
If you don't own it, you shouldn't write to it. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Troy Kisky authored
Only the interrupt routine processes this condition. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Troy Kisky authored
There is no need for complex macros every time we need to activate a queue. Also, no need to call skb_get_queue_mapping when we already know which queue it is using. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Troy Kisky authored
This reduces code and gains speed. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Troy Kisky authored
When first initialized, cur_tx points to the 1st entry in the queue, and dirty_tx points to the last. At this point, fec_enet_get_free_txdesc_num will return tx_ring_size -2. If tx_ring_size -2 entries are now queued, then fec_enet_get_free_txdesc_num should return 0, but it returns tx_ring_size instead. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-