- 13 Aug, 2019 1 commit
-
-
Dirk Morris authored
Change ct id hash calculation to only use invariants. Currently the ct id hash calculation is based on some fields that can change in the lifetime on a conntrack entry in some corner cases. The current hash uses the whole tuple which contains an hlist pointer which will change when the conntrack is placed on the dying list resulting in a ct id change. This patch also removes the reply-side tuple and extension pointer from the hash calculation so that the ct id will will not change from initialization until confirmation. Fixes: 3c791076 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id") Signed-off-by: Dirk Morris <dmorris@metaloft.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 09 Aug, 2019 3 commits
-
-
Pablo Neira Ayuso authored
Flows that are in teardown state (due to RST / FIN TCP packet) still have their offload flag set on. Hence, the conntrack garbage collector may race to undo the timeout adjustment that the fixup routine performs, leaving the conntrack entry in place with the internal offload timeout (one day). Update teardown flow state to ESTABLISHED and set tracking to liberal, then once the offload bit is cleared, adjust timeout if it is more than the default fixup timeout (conntrack might already have set a lower timeout from the packet path). Fixes: da5984e5 ("netfilter: nf_flow_table: add support for sending flows back to the slow path") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Update conntrack entry to pick up expired flows, otherwise the conntrack entry gets stuck with the internal offload timeout (one day). The TCP state also needs to be adjusted to ESTABLISHED state and tracking is set to liberal mode in order to give conntrack a chance to pick up the expired flow. Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
If a rule that has already a bound anonymous set fails to be added, the preparation phase releases the rule and the bound set. However, the transaction object from the abort path still has a reference to the set object that is stale, leading to a use-after-free when checking for the set->bound field. Add a new field to the transaction that specifies if the set is bound, so the abort path can skip releasing it since the rule command owns it and it takes care of releasing it. After this update, the set->bound field is removed. [ 24.649883] Unable to handle kernel paging request at virtual address 0000000000040434 [ 24.657858] Mem abort info: [ 24.660686] ESR = 0x96000004 [ 24.663769] Exception class = DABT (current EL), IL = 32 bits [ 24.669725] SET = 0, FnV = 0 [ 24.672804] EA = 0, S1PTW = 0 [ 24.675975] Data abort info: [ 24.678880] ISV = 0, ISS = 0x00000004 [ 24.682743] CM = 0, WnR = 0 [ 24.685723] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000428952000 [ 24.692207] [0000000000040434] pgd=0000000000000000 [ 24.697119] Internal error: Oops: 96000004 [#1] SMP [...] [ 24.889414] Call trace: [ 24.891870] __nf_tables_abort+0x3f0/0x7a0 [ 24.895984] nf_tables_abort+0x20/0x40 [ 24.899750] nfnetlink_rcv_batch+0x17c/0x588 [ 24.904037] nfnetlink_rcv+0x13c/0x190 [ 24.907803] netlink_unicast+0x18c/0x208 [ 24.911742] netlink_sendmsg+0x1b0/0x350 [ 24.915682] sock_sendmsg+0x4c/0x68 [ 24.919185] ___sys_sendmsg+0x288/0x2c8 [ 24.923037] __sys_sendmsg+0x7c/0xd0 [ 24.926628] __arm64_sys_sendmsg+0x2c/0x38 [ 24.930744] el0_svc_common.constprop.0+0x94/0x158 [ 24.935556] el0_svc_handler+0x34/0x90 [ 24.939322] el0_svc+0x8/0xc [ 24.942216] Code: 37280300 f9404023 91014262 aa1703e0 (f9401863) [ 24.948336] ---[ end trace cebbb9dcbed3b56f ]--- Fixes: f6ac8585 ("netfilter: nf_tables: unbind set in rule from commit path") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 05 Aug, 2019 2 commits
-
-
Florian Westphal authored
This makes the previously added 'encap test' pass. Because its possible that the xfrm dst entry becomes stale while such a flow is offloaded, we need to call dst_check() -- the notifier that handles this for non-tunneled traffic isn't sufficient, because SA or or policies might have changed. If dst becomes stale the flow offload entry will be tagged for teardown and packets will be passed to 'classic' forwarding path. Removing the entry right away is problematic, as this would introduce a race condition with the gc worker. In case flow is long-lived, it could eventually be offloaded again once the gc worker removes the entry from the flow table. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
'flow offload' expression should not offload flows that will be subject to ipsec, but it does. This results in a connectivity blackhole for the affected flows -- first packets will go through (offload happens after established state is reached), but all remaining ones bypass ipsec encryption and are thus discarded by the peer. This can be worked around by adding "rt ipsec exists accept" before the 'flow offload' rule matches. This test case will fail, support for such flows is added in next patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 03 Aug, 2019 7 commits
-
-
Qian Cai authored
There are a lot of those warnings with GCC8+ 64-bit, In file included from ./include/linux/sctp.h:42, from net/core/skbuff.c:47: ./include/uapi/linux/sctp.h:395:1: warning: alignment 4 of 'struct sctp_paddr_change' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:728:1: warning: alignment 4 of 'struct sctp_setpeerprim' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:727:26: warning: 'sspp_addr' offset 4 in 'struct sctp_setpeerprim' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage sspp_addr; ^~~~~~~~~ ./include/uapi/linux/sctp.h:741:1: warning: alignment 4 of 'struct sctp_prim' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:740:26: warning: 'ssp_addr' offset 4 in 'struct sctp_prim' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage ssp_addr; ^~~~~~~~ ./include/uapi/linux/sctp.h:792:1: warning: alignment 4 of 'struct sctp_paddrparams' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:784:26: warning: 'spp_address' offset 4 in 'struct sctp_paddrparams' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage spp_address; ^~~~~~~~~~~ ./include/uapi/linux/sctp.h:905:1: warning: alignment 4 of 'struct sctp_paddrinfo' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:899:26: warning: 'spinfo_address' offset 4 in 'struct sctp_paddrinfo' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage spinfo_address; ^~~~~~~~~~~~~~ This is because the commit 20c9c825 ("[SCTP] Fix SCTP socket options to work with 32-bit apps on 64-bit kernels.") added "packed, aligned(4)" GCC attributes to some structures but one of the members, i.e, "struct sockaddr_storage" in those structures has the attribute, "aligned(__alignof__ (struct sockaddr *)" which is 8-byte on 64-bit systems, so the commit overwrites the designed alignments for "sockaddr_storage". To fix this, "struct sockaddr_storage" needs to be aligned to 4-byte as it is only used in those packed sctp structure which is part of UAPI, and "struct __kernel_sockaddr_storage" is used in some other places of UAPI that need not to change alignments in order to not breaking userspace. Use an implicit alignment for "struct __kernel_sockaddr_storage" so it can keep the same alignments as a member in both packed and un-packed structures without breaking UAPI. Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kevin Lo authored
It is likely that PAL_BDC_CR should be PLA_BDC_CR. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong <liuyonglong@huawei.com> Tested-by: liuyonglong <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set, we should select PHYLIB, otherwise building still fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c:(.text+0x2744): undefined reference to `phy_start' enetc.c:(.text+0x282c): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c:(.text+0x28f8): undefined reference to `phy_stop' enetc.c:(.text+0x2904): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wang Xiayang authored
strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size 30. The output string is passed to qed_int_deassertion_aeu_bit() which calls DP_INFO() and relies NULL-termination. Use strlcpy instead. The other conditional branch above strncpy() needs no fix as snprintf() ensures NULL-termination. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
There is a race condition for an established connection that is being closed by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the 'remove_sock' is false): 1 for the initial value; 1 for the sk being in the bound list; 1 for the sk being in the connected list; 1 for the delayed close_work. After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may* decrease the refcnt to 3. Concurrently, hvs_close_connection() runs in another thread: calls vsock_remove_sock() to decrease the refcnt by 2; call sock_put() to decrease the refcnt to 0, and free the sk; next, the "release_sock(sk)" may hang due to use-after-free. In the above, after hvs_release() finishes, if hvs_close_connection() runs faster than "__vsock_release() -> sock_put(sk)", then there is not any issue, because at the beginning of hvs_close_connection(), the refcnt is still 4. The issue can be resolved if an extra reference is taken when the connection is established. Fixes: a9eeb998 ("hv_sock: Add support for delayed close") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Aug, 2019 12 commits
-
-
Denis Kirjanov authored
get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taras Kondratiuk authored
Commit 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by: Taras Kondratiuk <takondra@cisco.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Geert Uytterhoeven says: ==================== net: Manufacturer names and spelling fixes This is a set of fixes for (some blatantly) wrong manufacturer names and various spelling issues, mostly in Kconfig help texts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Use "Packet Engines" consistently. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to AMD instead of Broadcom, presumably because it was copied from the former. Fixes: adfc5217 ("broadcom: Move the Broadcom drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to IBM instead of Apple, presumably because it was copied from the former. Fixes: 8fb6b090 ("bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to Western Digital instead of National Semiconductor 8390, presumably because it was copied from the former. Fixes: 644570b8 ("8390: Move the 8390 related drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Jul, 2019 14 commits
-
-
Frode Isaksen authored
This variant of netif_napi_add() should be used from drivers using NAPI to exclusively poll a TX queue. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When permanent entries were introduced by the commit below, they were exempt from timing out and thus igmp leave wouldn't affect them unless fast leave was enabled on the port which was added before permanent entries existed. It shouldn't matter if fast leave is enabled or not if the user added a permanent entry it shouldn't be deleted on igmp leave. Before: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show $ After: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jia-Ju Bai authored
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed() In phy_led_trigger_change_speed(), there is an if statement on line 48 to check whether phy->last_triggered is NULL: if (!phy->last_triggered) When phy->last_triggered is NULL, it is used on line 52: led_trigger_event(&phy->last_triggered->trigger, LED_OFF); Thus, a possible null-pointer dereference may occur. To fix this bug, led_trigger_event(&phy->last_triggered->trigger, LED_OFF) is called when phy->last_triggered is not NULL. This bug is found by a static analysis tool STCheck written by the OSLAB group in Tsinghua University. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Build bot reports some recent TLS tests are failing with CONFIG_TLS=n. Correct the expected return code and skip TLS installation if not supported. Tested with CONFIG_TLS=n and CONFIG_TLS=m. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: cf32526c ("selftests/tls: add a test for ULP but no keys") Fixes: 65d41fb3 ("selftests/tls: add a bidirectional test") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Juliana Rodrigueiro authored
Since linux 4.9 it is not possible to use buffers on the stack for DMA transfers. During usb probe the driver crashes with "transfer buffer is on stack" message. This fix k-allocates a buffer to be used on "read_reg_atomic", which is a macro that calls "usb_control_msg" under the hood. Kernel 4.19 backtrace: usb_hcd_submit_urb+0x3e5/0x900 ? sched_clock+0x9/0x10 ? log_store+0x203/0x270 ? get_random_u32+0x6f/0x90 ? cache_alloc_refill+0x784/0x8a0 usb_submit_urb+0x3b4/0x550 usb_start_wait_urb+0x4e/0xd0 usb_control_msg+0xb8/0x120 hfcsusb_probe+0x6bc/0xb40 [hfcsusb] usb_probe_interface+0xc2/0x260 really_probe+0x176/0x280 driver_probe_device+0x49/0x130 __driver_attach+0xa9/0xb0 ? driver_probe_device+0x130/0x130 bus_for_each_dev+0x5a/0x90 driver_attach+0x14/0x20 ? driver_probe_device+0x130/0x130 bus_add_driver+0x157/0x1e0 driver_register+0x51/0xe0 usb_register_driver+0x5d/0x120 ? 0xf81ed000 hfcsusb_drv_init+0x17/0x1000 [hfcsusb] do_one_initcall+0x44/0x190 ? free_unref_page_commit+0x6a/0xd0 do_init_module+0x46/0x1c0 load_module+0x1dc1/0x2400 sys_init_module+0xed/0x120 do_fast_syscall_32+0x7a/0x200 entry_SYSENTER_32+0x6b/0xbe Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The whole block is protected by "if NET_VENDOR_MEDIATEK", so there is no need for individual driver config symbols to duplicate this dependency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * revert NETIF_F_LLTX usage as it caused problems * avoid warning on WMM parameters from AP that are too short * fix possible null-ptr dereference in hwsim * fix interface combinations with 4-addr and crypto control ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) memleak in ebtables from the error path for the 32/64 compat layer, from Florian Westphal. 2) Fix inverted meta ifname/ifidx matching when no interface is set on either from the input/output path, from Phil Sutter. 3) Remove goto label in nft_meta_bridge, also from Phil. 4) Missing include guard in xt_connlabel, from Masahiro Yamada. 5) Two patch to fix ipset destination MAC matching coming from Stephano Brivio, via Jozsef Kadlecsik. 6) Fix set rename and listing concurrency problem, from Shijie Luo. Patch also coming via Jozsef Kadlecsik. 7) ebtables 32/64 compat missing base chain policy in rule count, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough. The 'kcalloc()' just a few lines above, already uses GFP_KERNEL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
There is no good reason to use GFP_ATOMIC here. Other memory allocations are performed with GFP_KERNEL (see other 'dma_alloc_coherent()' below and 'kzalloc()' in 'et131x_rx_dma_memory_alloc()') Use GFP_KERNEL which should be enough. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Fixes: 6e43650c ("add maintainer for network drop monitor kernel service") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Two small fixes Patch #1 from Jiri fixes the error path of the module initialization function. Found during manual code inspection. Patch #2 from Petr further reduces the default shared buffer pool sizes in order to work around a problem that was originally described in commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
In commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"), pool size was reduced to mitigate a problem in port buffer usage of ports split four ways. It turns out that this work around does not solve the issue, and a further reduction is required. Thus reduce the size of pool 0 by another 2.7 MiB, and round down to the whole number of cells. Fixes: e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In case of sp2 pci driver registration fail, fix the error path to start with sp1 pci driver unregister. Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Jul, 2019 1 commit
-
-
xiaofeis authored
Set phy device advertising to enable MAC flow control. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-