- 22 Aug, 2022 11 commits
-
-
Tim Huang authored
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro definitions for AMD_CG_SUPPORT_BIF_LS. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Zhenneng Li authored
Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Zhenneng Li <lizhenneng@kylinos.cn> Signed-off-by:
-
Magali Lemes authored
dml_wrapper* files were removed in commit 01b537ee ("drm/amd/display: Remove unused code"), as they are not used anywhere. However, the header file wasn't removed, so remove the header as well. Signed-off-by:
Magali Lemes <magalilemes00@gmail.com> Signed-off-by:
-
Maíra Canal authored
The file amdgpu_dm_plane.c missed the header amdgpu_dm_plane.h, which resulted on the following warning: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1046:5: warning: no previous prototype for 'fill_dc_scaling_info' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1222:6: warning: no previous prototype for 'handle_cursor_update' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:152:6: warning: no previous prototype for 'modifier_has_dcc' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1576:5: warning: no previous prototype for 'amdgpu_dm_plane_init' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:157:10: warning: no previous prototype for 'modifier_gfx9_swizzle_mode' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:752:5: warning: no previous prototype for 'fill_plane_buffer_attributes' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:83:31: warning: no previous prototype for 'amd_get_format_info' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:88:6: warning: no previous prototype for 'fill_blending_from_plane_state' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:992:5: warning: no previous prototype for 'dm_plane_helper_check_state' [-Wmissing-prototypes] Therefore, include the missing header on the file and turn global functions that are not used outside of the file into static functions. Fixes: 5d945cbc ("drm/amd/display: Create a file dedicated to planes") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Signed-off-by:
-
Yang Li authored
Semicolon is not required after curly braces. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1918Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Hamza Mahfooz authored
Addresses the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3596:6: error: stack frame size (2092) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ UseMinimumDCFCLK() is eating away at dml30_ModeSupportAndSystemConfigurationFull()'s stack space, so use a pointer to struct vba_vars_st instead of passing lots of large arrays as parameters by value. Signed-off-by:Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
shaoyunl authored
The additional call is caused by merge conflict Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Signed-off-by:
-
Candice Li authored
No need to set up rb when no gfx rings. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
YiPeng Chai authored
Only amdgpu_get_xgmi_hive but no amdgpu_put_xgmi_hive which will leak the hive reference. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
YiPeng Chai authored
V1: The amdgpu_xgmi_remove_device function will send unload command to psp through psp ring to terminate xgmi, but psp ring has been destroyed in psp_hw_fini. V2: 1. Change the commit title. 2. Restore amdgpu_xgmi_remove_device to its original calling location. Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini. Signed-off-by:
-
Tim Huang authored
Enable GFXOFF allow control when set the GFX power gating. Signed-off-by:
-
- 16 Aug, 2022 29 commits
-
-
André Almeida authored
Add comments to document gfx_off related members of struct amdgpu_gfx. Signed-off-by:
André Almeida <andrealmeid@igalia.com> Signed-off-by:
-
André Almeida authored
Add documentation explaining those two new files. While here, add a note about the value type. Signed-off-by:
-
André Almeida authored
Implement functions to get and set GFXOFF's entry count and residency for vangogh. Signed-off-by:
-
André Almeida authored
Add debugfs interface to log GFXOFF statistics: - Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the time of query since system power-up - Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop. Read it to get average GFXOFF residency % multiplied by 100 during the last logging interval. Both features are designed to be keep the values persistent between suspends. Signed-off-by:
-
Tales Aparecida authored
Fixes five checkpatch warnings: CHECK: Please don't use multiple blank lines + + ERROR: Macros with complex values should be enclosed in parentheses +#define MAX_I64 \ + (int64_t)((1ULL << 63) - 1) WARNING: Missing a blank line after declarations + struct bw_fixed res; + ASSERT(value < BW_FIXED_MAX_I32 && value > BW_FIXED_MIN_I32); ERROR: that open brace { should be on the previous line + do + { ERROR: that open brace { should be on the previous line + if (remainder >= arg2_value) + { Signed-off-by:Tales Aparecida <tales.aparecida@gmail.com> Signed-off-by:
-
David Gow authored
The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about integer overflow, because it is treated as a positive value, which is then negated. The temporary positive value is not necessarily representable. This causes the following warning: ../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19: warning: integer overflow in expression ‘-9223372036854775808’ of type ‘long long int’ results in ‘-9223372036854775808’ [-Woverflow] 30 | (int64_t)(-(1LL << 63)) | ^ Writing out (-MAX_I64 - 1) works instead. Signed-off-by:David Gow <davidgow@google.com> Signed-off-by:
-
min tang authored
There is no semicolon after '}' in line 510. Signed-off-by:
min tang <tangmin@cdjrlc.com> Signed-off-by:
-
min tang authored
The double `aligned' is duplicated in line 1070, remove one. Signed-off-by:
-
Rodrigo Siqueira authored
We have some old code associated with DML, which we had plans to use, but at some point, we just moved away from it. This commit removes the dml_wrapper* files since they are not used anymore. Reported-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
shaoyunl authored
The second jump table is required on live migration or mulitple VF configuration on Aldebaran. With this implemented, the first level jump table(hw used) will be same, mec fw internal will use the second level jump table jump to the real functionality implementation. so the different VF can load different version of MEC as long as they support sjt Signed-off-by:
-
Hamza Mahfooz authored
Currently, we are using soc._clock_tmp[] to temporarily store and modify data from soc.clock_limits[] before copying it back into soc.clock_limits[] (because modifying data directly in soc.clock_limits[] causes unintended behavior). However, this approach has a number of downsides, such as: 1. struct _vcs_dpi_soc_bounding_box_st's creation/destruction aren't well defined (which could mean more unintended behavior). 2. Throwing "temp" varibles in structs everywhere doesn't make for a particularly readable codebase. For these reasons, we should get rid of soc._clock_tmp[] by defining a struct scratch within struct dc that, contains within it all of the temporary variables (including _clock_tmp[]) such that it is obvious how they are intended to be used. Co-authored-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Hamza Mahfooz authored
Currently, we only attempt to setup DSC at the virtual DPCD port, however many modern displays come with DSC support and MST hubs can now support DSC pass-through. So, to more optimally make use of the available bandwidth, use DSC pass-through when possible by adding DSC pass-through enablement support into the DSC enable sequence. Signed-off-by:
-
Hamza Mahfooz authored
Add a mode validation routine for DSC pass-through. Both the link from source to hub, and the link from hub to monitor are checked, according to the current link training result and full pbn returned by enum path resource sideband message. Pick up the minimum value as the bandwidth bottleneck for the end to end link bandwidth constraint, and check if the maximum DSC decompression bandwidth can fit. v2: squash in DSC CONFIG_DRM_AMD_DC_DCN compilation fix (Hamza) Co-authored-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Hamza Mahfooz authored
Currently, there is no way to identify if DSC pass-through can be enabled and what aux DSC pass-through requests ought to be sent to. So, add a variable to struct drm_dp_mst_port that keeps track of the aforementioned information. Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Melissa Wen authored
AMD GPU display manager (DM) maps DRM pixel blend modes (None, Pre-multiplied, Coverage) to MPC hw blocks through blend configuration options. Describe relevant elements and how to set and test them to get the expected DRM blend mode on DCN hw. v2: - add ref tag (Tales) Signed-off-by:
Melissa Wen <mwen@igalia.com> Reviewed-by:
-
Melissa Wen authored
Describe structs and enums used to set blend mode properties to MPC blocks. Some pieces of information are already available as code comments, and were just formatted. Others were collected and summarised from discussions on AMD issue tracker[1][2]. [1] https://gitlab.freedesktop.org/drm/amd/-/issues/1734 [2] https://gitlab.freedesktop.org/drm/amd/-/issues/1769 v2: - fix typos (Tales) - add MPCC to MPC entry in the glossary Signed-off-by:
-
Melissa Wen authored
Add details about color correction capabilities and explain a bit about differences between DC hw generations and also how they are mapped between DRM and DC interface. Two schemas for DCN 2.0 and 3.0 (converted to svg from the original png) is included to illustrate it. They were obtained from a discussion[1] in the amd-gfx mailing list. [1] https://lore.kernel.org/amd-gfx/20220422142811.dm6vtk6v64jcwydk@mail.igalia.com/ v1: - remove redundant comments (Harry) - fix typos (Harry) v2: - reword introduction of color section - add co-dev tag for Harry - who provided most of the info - fix typos (Tales) - describe missing struct parameters (Tales and Siqueira) Co-developed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Melissa Wen authored
AMDGPU DM maps DRM color management properties (degamma, ctm and gamma) to DC color correction entities. Part of this mapping is already documented as code comments and can be converted as kernel docs. v2: - rebase to amd-staging-drm-next - fix typos (Tales) - undo kernel-docs inside functions (Tales) Signed-off-by:
-
Rodrigo Siqueira authored
Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
The timing programming inside DCN is far from trivial, it has multiple parameters associated with that, and the lack of documentation does not help comprehend this already complicated topic. This commit tries to improve this situation by expanding the documentation of dc_crtc_timing and the VTG program function. Reviewed-by:
-
Rodrigo Siqueira authored
In the DCN code, we can find some references to three different pipe split policies but no clear description. This commit adds some kernel-doc that explains more about these options and a little bit of their impact. Reviewed-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Victor Zhao authored
In multi container use case, reset time is important, so skip ring tests and cp halt wait during ip suspending for reset as they are going to fail and cost more time on reset v2: add a hang flag to indicate the reset comes from a job timeout, skip ring test and cp halt wait in this case v3: move hang flag to adev Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Victor Zhao authored
For some hang caused by slow tests, engine cannot be stopped which may cause resume failure after reset. In this case, force halt engine by reverting context addresses Signed-off-by:
-
Victor Zhao authored
Save and restore gfxhub regs as they will be reset during mode 2 Signed-off-by:
-
Victor Zhao authored
Introduce amdgpu_reset_level debugfs in order to help debug and test specific type of reset. Also helps blocking unwanted type of resets. By default, mode2 reset will not be enabled v2: make this debugfs in adev and use debugfs_create_u32 Signed-off-by:
-
Victor Zhao authored
- introduce AMDGPU_SKIP_MODE2_RESET flag - let mode2 reset fallback to default reset method if failed v2: move this part out from the asic specific part Signed-off-by:
-
