Skip to content

L
linux
Switch branch/tag
  1. 15 Jul, 2008 14 commits
    • Eli Cohen's avatar
      IB/mlx4: Pass congestion management class MADs to the HCA · 6578cf33
      Eli Cohen authored 
      ConnectX HCAs support the IB_MGMT_CLASS_CONG_MGMT management class, so
process MADs of this class through the MAD_IFC firmware command.
Signed-off-by: default avatarEli Cohen <eli@mellanox.co.il>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      6578cf33
    • Eli Cohen's avatar
      IB/mlx4: Configure QPs' max message size based on real device capability · d1f2cd89
      Eli Cohen authored 
      ConnectX returns the max message size it supports through the
QUERY_DEV_CAP firmware command.  When modifying a QP to RTR, the max
message size for the QP must be specified.  This value must not exceed
the value declared through QUERY_DEV_CAP.  The current code ignores
the max allowed size and unconditionally sets the value to 2^31.  This
patch sets all QPs to the max value allowed as returned from firmware.
Signed-off-by: default avatarEli Cohen <eli@mellanox.co.il>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      d1f2cd89
    • Steve Wise's avatar
      RDMA/cxgb3: MEM_MGT_EXTENSIONS support · e7e55829
      Steve Wise authored 
      - set IB_DEVICE_MEM_MGT_EXTENSIONS capability bit if fw supports it.
- set max_fast_reg_page_list_len device attribute.
- add iwch_alloc_fast_reg_mr function.
- add iwch_alloc_fastreg_pbl
- add iwch_free_fastreg_pbl
- adjust the WQ depth for kernel mode work queues to account for
  fastreg possibly taking 2 WR slots.
- add fastreg_mr work request support.
- add local_inv work request support.
- add send_with_inv and send_with_se_inv work request support.
- removed useless duplicate enums/defines for TPT/MW/MR stuff.
Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      e7e55829
    • Steve Wise's avatar
      RDMA/core: Add memory management extensions support · 00f7ec36
      Steve Wise authored 
      This patch adds support for the IB "base memory management extension"
(BMME) and the equivalent iWARP operations (which the iWARP verbs
mandates all devices must implement).  The new operations are:

 - Allocate an ib_mr for use in fast register work requests.

 - Allocate/free a physical buffer lists for use in fast register work
   requests.  This allows device drivers to allocate this memory as
   needed for use in posting send requests (eg via dma_alloc_coherent).

 - New send queue work requests:
   * send with remote invalidate
   * fast register memory region
   * local invalidate memory region
   * RDMA read with invalidate local memory region (iWARP only)

Consumer interface details:

 - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added
   to indicate device support for these features.

 - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV,
   IB_WR_RDMA_READ_WITH_INV are added.

 - A new consumer API function, ib_alloc_mr() is added to allocate
   fast register memory regions.

 - New consumer API functions, ib_alloc_fast_reg_page_list() and
   ib_free_fast_reg_page_list() are added to allocate and free
   device-specific memory for fast registration page lists.

 - A new consumer API function, ib_update_fast_reg_key(), is added to
   allow the key portion of the R_Key and L_Key of a fast registration
   MR to be updated.  Consumers call this if desired before posting
   a IB_WR_FAST_REG_MR work request.

Consumers can use this as follows:

 - MR is allocated with ib_alloc_mr().

 - Page list memory is allocated with ib_alloc_fast_reg_page_list().

 - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key().

 - MR made VALID and bound to a specific page list via
   ib_post_send(IB_WR_FAST_REG_MR)

 - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV),
   ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with
   invalidate operation.

 - MR is deallocated with ib_dereg_mr()

 - page lists dealloced via ib_free_fast_reg_page_list().

Applications can allocate a fast register MR once, and then can
repeatedly bind the MR to different physical block lists (PBLs) via
posting work requests to a send queue (SQ).  For each outstanding
MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be
allocated (the fast_reg_page_list is owned by the low-level driver
from the consumer posting a work request until the request completes).
Thus pipelining can be achieved while still allowing device-specific
page_list processing.

The 32-bit fast register memory key/STag is composed of a 24-bit index
and an 8-bit key.  The application can change the key each time it
fast registers thus allowing more control over the peer's use of the
key/STag (ie it can effectively be changed each time the rkey is
rebound to a page list).
Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      00f7ec36
    • Eli Cohen's avatar
      IPoIB: Copy small received SKBs in connected mode · f89271da
      Eli Cohen authored 
      The connected mode implementation in the IPoIB driver has a large
overhead in the way SKBs are handled in the receive flow.  It usually
allocates an SKB with as big as was used in the currently received SKB
and moves unused fragments from the old SKB to the new one. This
involves a loop on all the remaining fragments and incurs overhead on
the CPU.  This patch, for small SKBs, allocates an SKB just large
enough to contain the received data and copies to it the data from the
received SKB.  The newly allocated SKB is passed to the stack and the
old SKB is reposted.

When running netperf, UDP small messages, without this pach I get:

    UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
    14.4.3.178 (14.4.3.178) port 0 AF_INET
    Socket  Message  Elapsed      Messages
    Size    Size     Time         Okay Errors   Throughput
    bytes   bytes    secs            #      #   10^6bits/sec

    114688     128   10.00     5142034      0     526.31
    114688           10.00     1130489            115.71

With this patch I get both send and receive at ~315 mbps.

The reason that send performance actually slows down is as follows:
When using this patch, the overhead of the CPU for handling RX packets
is dramatically reduced.  As a result, we do not experience RNR NAK
messages from the receiver which cause the connection to be closed and
reopened again; when the patch is not used, the receiver cannot handle
the packets fast enough so there is less time to post new buffers and
hence the mentioned RNR NACKs.  So what happens is that the
application *thinks* it posted a certain number of packets for
transmission but these packets are flushed and do not really get
transmitted.  Since the connection gets opened and closed many times,
each time netperf gets the CPU time that otherwise would have been
given to IPoIB to actually transmit the packets.  This can be verified
when looking at the port counters -- the output of ifconfig and the
oputput of netperf (this is for the case without the patch):

    tx packets
    ==========
    port counter:   1,543,996
    ifconfig:       1,581,426
    netperf:        5,142,034

    rx packets
    ==========
    netperf         1,1304,089
Signed-off-by: default avatarEli Cohen <eli@mellanox.co.il>
      f89271da
    • Roland Dreier's avatar
      RDMA: Remove subversion $Id tags · f3781d2e
      Roland Dreier authored 
      They don't get updated by git and so they're worse than useless.
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      f3781d2e
    • Dotan Barak's avatar
      RDMA: Improve include file coding style · 4deccd6d
      Dotan Barak authored 
      Remove subversion $Id lines and improve readability by fixing other
coding style problems pointed out by checkpatch.pl.
Signed-off-by: default avatarDotan Barak <dotanba@gmail.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      4deccd6d
    • Robert P. J. Day's avatar
      IB/ipath: Simplify code using ARRAY_SIZE() macro · fd91b1bf
      Robert P. J. Day authored 
      Signed-off-by: default avatarRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      fd91b1bf
    • Eli Cohen's avatar
      IB/mlx4: Optimize QP stamping · 9670e553
      Eli Cohen authored 
      The idea is that for QPs with fixed size work requests (eg selective
signaling QPs), before stamping the WQE, we read the value of the DS
field, which gives the effective size of the descriptor as used in the
previous post.  Then we stamp only that area, since the rest of the
descriptor is already stamped.

When initializing the send queue buffer, make sure the DS field is
initialized to the max descriptor size so that the subsequent stamping
will be done on the entire descriptor area.
Signed-off-by: default avatarEli Cohen <eli@mellanox.co.il>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      9670e553
    • Moni Shoua's avatar
      IB/sa: Fail requests made while creating new SM AH · 164ba089
      Moni Shoua authored 
      This patch solves a race that occurs after an event occurs that causes
the SA query module to flush its SM address handle (AH).  When SM AH
becomes invalid and needs an update it is handled by the global
workqueue.  On the other hand this event is also handled in the IPoIB
driver by queuing work in the ipoib_workqueue that does multicast
joins.  Although queuing is in the right order, it is done to 2
different workqueues and so there is no guarantee that the first to be
queued is the first to be executed.

This causes a problem because IPoIB may end up sending an request to
the old SM, which will take a long time to time out (since the old SM
is gone); this leads to a much longer than necessary interruption in
multicast traffer.

The patch sets the SA query module's SM AH to NULL when the event
occurs, and until update_sm_ah() is done, any request that needs sm_ah
fails with -EAGAIN return status.

For consumers, the patch doesn't make things worse.  Before the patch,
MADs are sent to the wrong SM so the request gets lost.  Consumers can
be improved if they examine the return code and respond to EAGAIN
properly but even without an improvement the situation is not getting
worse.
Signed-off-by: default avatarMoni Levy <monil@voltaire.com>
Signed-off-by: default avatarMoni Shoua <monis@voltaire.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      164ba089
    • Sean Hefty's avatar
      RDMA: Fix license text · a9474917
      Sean Hefty authored 
      The license text for several files references a third software license
that was inadvertently copied in.  Update the license to what was
intended.  This update was based on a request from HP.
Signed-off-by: default avatarSean Hefty <sean.hefty@intel.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      a9474917
    • Christophe Jaillet's avatar
      RDMA/nes: Remove unnecessary memset() · 929555a2
      Christophe Jaillet authored 
      Remove an explicit memset(..., 0, ...) of a 'listener' structure
allocated with kzalloc().
Signed-off-by: default avatarChristophe Jaillet <christophe.jaillet@wanadoo.fr>
Acked-by: default avatarFaisal Latif <faisal@neteffect.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      929555a2
    • Roland Dreier's avatar
      IB/srp: Remove use of cached P_Key/GID queries · 969a60f9
      Roland Dreier authored 
      The SRP initiator is currently using ib_find_cached_pkey() and
ib_get_cached_gid() in situations where the uncached ib_find_pkey()
and ib_query_gid() functions serve just as well: sleeping is allowed
and performance is not an issue.  Since we want to eliminate the
cached operations in the long term, convert SRP to use the uncached
variants.
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      969a60f9
    • David Woodhouse's avatar
      firmware: Correct dependency on CONFIG_EXTRA_FIRMWARE_DIR · 50515af2
      David Woodhouse authored 
      When CONFIG_EXTRA_FIRMWARE_DIR gets changed, the filename in the .S file
(which uses .incbin to include the binary) needs to change. When we
renamed the BUILTIN_FIRMWARE_DIR option to EXTRA_FIRMWARE_DIR, we forgot
to update the manual dependency in firmware/Makefile, so it was
depending on a non-existent file in include/config/
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      50515af2
  3. 14 Jul, 2008 26 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7