- 17 Mar, 2021 40 commits
-
-
Marek Behún authored
The 16-bit Port Policy CTL register from older chips is on 6393x changed to Port Policy MGMT CTL, which can access more data, but indirectly and via 8-bit registers. The original 16-bit value is divided into first two 8-bit register in the Port Policy MGMT CTL. We can therefore use the previous code to compute the mask and shift, and then - if 0 <= shift < 8, we access register 0 in Port Policy MGMT CTL - if 8 <= shift < 16, we access register 1 in Port Policy MGMT CTL There are in fact other possible policy settings for Amethyst which could be added here, but this can be done in the future. Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Pavana Sharma <pavana.sharma@digi.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavana Sharma authored
The Marvell 88E6393X device is a single-chip integration of a 11-port Ethernet switch with eight integrated Gigabit Ethernet (GbE) transceivers and three 10-Gigabit interfaces. This patch adds functionalities specific to mv88e6393x family (88E6393X, 88E6193X and 88E6191X). The main differences between previous devices and this one are: - port 0 can be a SERDES port - all SERDESes are one-lane, eg. no XAUI nor RXAUI - on the other hand the SERDESes can do USXGMII, 10GBASER and 5GBASER (on 6191X only one SERDES is capable of more than 1g; USXGMII is not yet supported with this change) - Port Policy CTL register is changed to Port Policy MGMT CTL register, via which several more registers can be accessed indirectly - egress monitor port is configured differently - ingress monitor/CPU/mirror ports are configured differently and can be configured per port (ie. each port can have different ingress monitor port, for example) - port speed AltBit works differently than previously - PHY registers can be also accessed via MDIO address 0x18 and 0x19 (on previous devices they could be accessed only via Global 2 offsets 0x18 and 0x19, which means two indirections; this feature is not yet leveraged with thiis commit) Co-developed-by:
Ashkan Boldaji <ashkan.boldaji@digi.com> Signed-off-by:
-
Marek Behún authored
There are two implementations of the .set_egress_port method, and both of them, if successful, set chip->*gress_dest_port variable. To avoid code repetition, wrap this method into mv88e6xxx_set_egress_port. Signed-off-by:
-
Pavana Sharma authored
Returning 0 is no more an error case with MV88E6393 family which has serdes lane numbers 0, 9 or 10. So with this change .serdes_get_lane will return lane number or -errno (-ENODEV or -EOPNOTSUPP). Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
dingsenjie authored
remove unneeded variable: "ret". Signed-off-by:
dingsenjie <dingsenjie@yulong.com> Signed-off-by:
-
dingsenjie authored
remove unneeded variable: "ret". Signed-off-by:
-
Ong Boon Leong authored
Extending the driver to support per-queue RX and TX coalesce settings in order to support below commands: To show per-queue coalesce setting:- $ ethtool --per-queue <DEVNAME> queue_mask <MASK> --show-coalesce To set per-queue coalesce setting:- $ ethtool --per-queue <DEVNAME> queue_mask <MASK> --coalesce \ [rx-usecs N] [rx-frames M] [tx-usecs P] [tx-frames Q] Signed-off-by:Ong Boon Leong <boon.leong.ong@intel.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== DSA/switchdev documentation fixups These are some small fixups after the recently merged documentation update. ==================== Signed-off-by: -
Vladimir Oltean authored
Since commit 9d5ef190 ("net: dsa: automatically bring up DSA master when opening user port"), DSA manages the administrative status of the host port automatically. Update the configuration steps to reflect this. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
"make htmldocs" complains: configuration.rst:165: WARNING: duplicate label networking/dsa/configuration:single port, other instance in (...) configuration.rst:212: WARNING: duplicate label networking/dsa/configuration:bridge, other instance in (...) configuration.rst:252: WARNING: duplicate label networking/dsa/configuration:gateway, other instance in (...) And for good reason, because the "single port", "bridge" and "gateway" use cases are replicated twice, once for normal taggers and twice for DSA_TAG_PROTO_NONE. So when trying to reference these sections via a hyperlink such as: https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#single-port it will always reference the first occurrence, and never the second one. This change makes the "single port", "bridge" and "gateway" configuration examples consistent with the formatting used in the "Configuration showcases" subsection. Signed-off-by:
-
Vladimir Oltean authored
"make htmldocs" produces these warnings: Documentation/networking/dsa/dsa.rst:468: WARNING: Unexpected indentation. Documentation/networking/dsa/dsa.rst:477: WARNING: Block quote ends without a blank line; unexpected unindent. Fixes: 8411abbc ("Documentation: networking: dsa: mention integration with devlink") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Vladimir Oltean authored
Even though this is clear from the context, it is nice to actually be grammatically correct. Fixes: 0f22ad45 ("Documentation: networking: switchdev: clarify device driver behavior") Reported-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
It looks like "make htmldocs" produces this warning: Documentation/networking/switchdev.rst:482: WARNING: Unexpected indentation. Fixes: 0f22ad45 ("Documentation: networking: switchdev: clarify device driver behavior") Reported-by:
-
David S. Miller authored
Naveen Mamindlapalli says: ==================== refactor code related to npc install flow This patchset refactors and cleans up the code associated with the npc install flow API, specifically to eliminate different code paths while installing MCAM rules by AF and PF. This makes the code easier to understand and maintain. Also added support for multi channel NIX promisc entry. ==================== Signed-off-by: -
Naveen Mamindlapalli authored
The mbox handler npc_install_flow returns ENOTSUPP for unsupported flow keys. This patch modifies the return value to AF driver defined error code for debugging purpose. Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
-
Subbaraya Sundeep authored
A mcam rule described by mcam_rule struct has all the info such as the hardware MCAM entry number, match criteria and corresponding action etc. All mcam rules are stored in a linked list mcam->rules. When adding/updating a rule to the mcam->rules it is checked if a rule already exists for the mcam entry. If the rule already exists, the same rule is updated instead of creating new rule. This way only one mcam_rule exists for the only one default unicast entry installed by AF. But a PF/VF can get different NIXLF (or default unicast entry number) after a attach-detach-attach sequence. When that happens mcam_rules list end up with two default unicast rules. Fix the problem by deleting the default unicast rule list node always when disabling mcam rules. Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Naveen Mamindlapalli authored
Use npc_install_flow mailbox API for installing the default promisc and broadcast match entries. Earlier these entries were installed using low level npc_config_mcam_entry API, which does not store these rules and is not available when the rules are dumped using debugfs. Added chan_mask field to npc_install_flow_req to calculate channel mask when channel count is greater than 1 and configure the channel mask in entry kw_mask. Signed-off-by:
-
Nalla, Pradeep authored
This patch adds support for multi channel NIX promisc entry. Packets sent on all those channels by the host should be received by the interface to which those channels belong. Channel count, if greater than 1, should be power of 2 as only one promisc entry is available for the interface. Key mask is modified such that incoming packets from channel base to channel count are directed to the same pci function. Signed-off-by:
Nalla, Pradeep <pnalla@marvell.com> Signed-off-by:
-
Naveen Mamindlapalli authored
This patch refactors npc_install_flow function to install AF installed default MCAM entries similar to other MCAM entries installed by PF/VF. As a result the code would be more readable and easy to maintain. Modified npc_verify_entry and npc_verify_channel to properly check MCAM rules installed by AF. Signed-off-by:
-
David S. Miller authored
mlxsw: Allow 802.1d and .1ad VxLAN bridges to coexist on Spectrum>=2 Ido Schimmel says: ==================== This patchset allows user space to simultaneously configure both 802.1d and 802.1ad VxLAN bridges on Spectrum-2 and later ASICs. 802.1ad VxLAN bridges are still forbidden on Spectrum-1. The reason for the current limitation is that up until now the EtherType that was pushed to decapsulated VxLAN packets was a property of the tunnel port, of which there is only one. This meant that a 802.1ad VxLAN bridge could not be configured if the tunnel port was already configured to push a 802.1q tag. This patchset improves the situation by making two changes. First, decapsulated packets are marked as having their EtherType decided by the egress port. Second, local ports member in the bridge (e.g., swp1) are configured to set the correct egress EtherType. Patchset overview: Patch #1 adds a register required for the first change Patches #2-#3 add the register required for the second change and a corresponding API Patch #4 prepares the driver for the split in behavior between Spectrum-1 and later ASICs Patch #5 performs the two above mentioned changes to allow the driver to support simultaneous 802.1ad and 802.1d VxLAN bridges on Spectrum-2 and later ASICs Patch #6 adds a selftest Patch #7 removes a selftest that verified the limitation that was lifted by this patchset ==================== Signed-off-by: -
Amit Cohen authored
q_in_vni_veto.sh is not needed anymore because VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge can coexist. Remove the test. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Configure VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge at the same time in same switch, verify that traffic passed as expected. Signed-off-by:
-
Amit Cohen authored
Currently only one EtherType can be configured for pushing in tunnels because EtherType is configured using SPVID.et_vlan for tunnel port. This behavior is forbidden by comparing mlxsw_sp_nve_config struct for each new tunnel, the struct contains 'ethertype' field which means that only one EtherType is legal at any given time. Remove 'ethertype' field to allow creating VxLAN devices with different bridges. To allow using several types of VxLAN bridges at the same time, the EtherType should be determined at the egress port. This behavior is achieved by setting SPVID to decide which EtherType to push at egress and for each local_port which is member in 802.1ad bridge, set SPEVET.et_vlan to ether_type1 (i.e., 0x88A8). Use switchdev_ops->init() to set different mlxsw_sp_bridge_ops for different ASICs in order to be able to split the behavior when port joins / leaves an 802.1ad bridge in different ASICs. Signed-off-by:
-
Amit Cohen authored
A subsequent patch will need to implement different set of operations when a port joins / leaves an 802.1ad bridge, based on the ASIC type. Prepare for this change by allowing to initialize the bridge module based on the ASIC type via 'struct mlxsw_sp_switchdev_ops'. Signed-off-by:
-
Amit Cohen authored
A subsequent patch will cause decapsulated packets to have their EtherType determined by the egress port. Add mlxsw_sp_port_egress_ethtype_set() which will be called when a port joins an 802.1ad bridge, so that it will set an 802.1ad EtherType on decapsulated packets transmitted through it, instead of the default 802.1q EtherType. Signed-off-by:
-
Amit Cohen authored
SPEVET configures which EtherType to push at egress for packets incoming through a local port for which 'SPVID.egr_et_set' is set. The next patches will use SPEVET to configure EtherType 0x88A8 and 0x8100 for local ports member in 802.1ad and 802.1q bridges, respectively. This allows using dual VxLAN bridges (802.1d and 802.1ad at the same time). Signed-off-by:
-
Amit Cohen authored
SPVID.egr_et_set=1 means that when VLAN is pushed at ingress (for untagged packets or for QinQ push mode) then the EtherType is decided at the egress port. The next patches will use this field for VxLAN devices (tunnel port) in order to allow using dual VxLAN bridges (802.1d and 802.1ad at the same time). Signed-off-by:
-
David S. Miller authored
Álvaro Fernández Rojas says: ==================== net: dsa: b53: support legacy tags Legacy Broadcom tags are needed for older switches. ==================== Signed-off-by: -
Álvaro Fernández Rojas authored
These tags are used on BCM5325, BCM5365 and BCM63xx switches. Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Álvaro Fernández Rojas authored
Add support for legacy Broadcom tags, which are similar to DSA_TAG_PROTO_BRCM. These tags are used on BCM5325, BCM5365 and BCM63xx switches. Signed-off-by:
-
Bhaskar Chowdhury authored
s/procesing/processing/ s/comparations/comparisons/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Álvaro Fernández Rojas authored
BCM63xx switches are present on bcm63xx and bmips devices. Signed-off-by:
-
Voon Weifeng authored
According to Synopsis DesignWare EQoS Databook, the Clock Domain Cross synchronization error is introduced tue to the clock(GMII Tx/Rx clock) being different at the capture as compared to the PTP clock(clk_ptp_ref_i) that is used to generate the time. The CDC synchronization error is almost equal to 2 times the clock period of the PTP clock(clk_ptp_ref_i). On a Intel Tigerlake platform (with Marvell 88E2110 external PHY): Before applying this patch (with CDC synchronization error): ptp4l[64.044]: rms 8 max 13 freq +30877 +/- 11 delay 216 +/- 0 ptp4l[65.047]: rms 13 max 20 freq +30869 +/- 17 delay 213 +/- 0 ptp4l[66.050]: rms 12 max 20 freq +30857 +/- 11 delay 213 +/- 0 ptp4l[67.052]: rms 11 max 22 freq +30849 +/- 10 delay 215 +/- 0 ptp4l[68.055]: rms 10 max 16 freq +30853 +/- 13 delay 215 +/- 0 ptp4l[69.057]: rms 7 max 13 freq +30848 +/- 9 delay 216 +/- 0 ptp4l[70.060]: rms 8 max 13 freq +30846 +/- 10 delay 216 +/- 0 ptp4l[71.063]: rms 9 max 15 freq +30836 +/- 8 delay 218 +/- 0 After applying this patch (CDC syncrhonization error is taken care of): ptp4l[61.516]: rms 773 max 824 freq +31526 +/- 158 delay 200 +/- 0 ptp4l[62.519]: rms 427 max 596 freq +31668 +/- 39 delay 198 +/- 0 ptp4l[63.522]: rms 113 max 206 freq +31482 +/- 57 delay 198 +/- 0 ptp4l[64.525]: rms 40 max 56 freq +31316 +/- 29 delay 200 +/- 0 ptp4l[65.528]: rms 47 max 56 freq +31255 +/- 17 delay 200 +/- 0 ptp4l[66.531]: rms 26 max 36 freq +31246 +/- 9 delay 200 +/- 0 ptp4l[67.534]: rms 12 max 18 freq +31254 +/- 12 delay 202 +/- 0 ptp4l[68.537]: rms 7 max 12 freq +31263 +/- 10 delay 202 +/- 0 Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: cleanups and simplifications We do a number of cleanups and simplifications, especially regarding call signatures in the binding table. This makes the code easier to understand and serves as preparation for upcoming functional additions. ==================== Signed-off-by: -
Jon Maloy authored
We move some warning printouts to more strategic locations to avoid duplicates and yield more detailed information about the reported problem. Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Hoang Le <hoang.h.le@dektech.com.au> Acked-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Jon Maloy authored
We reduce and localize the usage of the tipc_sub_xx() macros by adding a corresponding member, with fields set in host-endian format, to struct tipc_subscription. Signed-off-by:
-
Jon Maloy authored
The function tipc_report_overlap() is called from the binding table with numerous parameters taken from an instance of struct publication. A closer look reveals that it always is safe to send along a pointer to the instance itself, and hence reduce the call signature. We do that in this commit. Signed-off-by:
-
Jon Maloy authored
We reduce the signature of tipc_find_service() and tipc_create_service(). The reason for doing this might not be obvious, but we plan to let struct tipc_uaddr contain information that is relevant for these functions in a later commit. Signed-off-by:
-
Jon Maloy authored
We simplify the signatures of the functions tipc_service_create_range() and tipc_service_find_range(). Signed-off-by:
-
Jon Maloy authored
We reduce the signature of tipc_nametbl_lookup_group() by using a struct tipc_uaddr pointer. This entails a couple of minor changes in the functions tipc_send_group_mcast/anycast/unicast/bcast() in socket.c Signed-off-by:
-
