- 01 Jul, 2011 4 commits
-
-
Marek Szyprowski authored
__vb2_queue_alloc function returns the number of successfully allocated buffers. There is no point in checking if the returned value is negative. If this function returns 0, videobuf2 should just return -ENOMEM to userspace, because no driver can work without memory buffers. Reported-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Marek Szyprowski authored
queued_count variable was left untouched during the queue reinitialization in __vb2_queue_cancel, what might lead to mismatch between the real number of queued buffers and queued_count variable. Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Marek Szyprowski authored
This reverts commit 31901a07. Queue should be reinitialized on each REQBUFS() call even if the memory access method and buffer count have not been changed. The user might have changed the format and if we go the short path introduced in that commit, the memory buffer will not be reallocated to fit with new format. The previous patch was just over-engineered optimization, which just introduced a bug to videobuf2. Reported-by:
-
Marek Szyprowski authored
Add __GFP_NOWARN parameter to videobuf2 dma-sg allocator to prevent kernel warning and stack dump if there is not enough memory available. Videobuf2 and drivers should correctly handle no memory case, so there is no need for stack dump and extensive log. Signed-off-by:
-
- 21 Jun, 2011 1 commit
-
-
Hans de Goede authored
Unplugging a pwc cam while an app has the /dev/video# node open leads to an oops in pwc_video_close when the app closes the node, because the disconnect handler has free-ed the pdev struct pwc_video_close tries to use. Instead of adding some sort of bandaid for this. fix it properly using the v4l2 core's new(ish) behavior of keeping the v4l2_dev structure around until both unregister has been called, and all file handles referring to it have been closed: Embed the v4l2_dev structure in the pdev structure and define a v4l2 dev release callback releasing the pdev structure (and thus also the embedded v4l2 dev structure. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org Signed-off-by:
-
- 11 Jun, 2011 23 commits
-
-
Marek Szyprowski authored
Add maintainers for the videobuf2 V4L2 driver framework. Signed-off-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
HeungJun, Kim authored
Signed-off-by:
HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by:
-
HeungJun, Kim authored
Remove union version in the m5mols_get_version(), and read version information directly. Also remove VERSION_SIZE. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
HeungJun, Kim authored
For now, the m5mols_read() share in case of I2C packet 1, 2, 4 byte(s) width. So, this commit adds 3 functions - m5mols_read_u8/u16/u32() according to byte width of I2C packet. And, the u32 variables in spite of u8 or u16 for fitting to m5mols_read() having no choice, is replaced to have original byte width like u8, u16, u32 as same reason. Signed-off-by:
-
HeungJun, Kim authored
The main capture and the thumbnail image size registers were erroneously defined to have 1 byte width, resulting in wrong reported image size. Fix this by changing the registers width to correct value. Reported-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Signed-off-by:
-
Sylwester Nawrocki authored
With multi-planar formats fmt.pix_mp member of struct v4l2_format should be used rather than fmt.pix. Fix find_fmt() function to do the right thing. Signed-off-by:
-
Sylwester Nawrocki authored
The buf_init buffer queue operation is optional and buffer_init() does nothing, remove it. Signed-off-by:
-
Sylwester Nawrocki authored
Avoid dereferencing of NULL f->fmt. Correct size of the allocated buffer in case the crop rectangle is smaller than the bounds rectangle (configured with S_FMT). Also remove redundant check for *num_buffer == 0 as this case is handled in videobuf2. Signed-off-by:
-
Sylwester Nawrocki authored
Correct inconsistencies in data structures' documentation. Remove meaningless debug traces. Signed-off-by:
-
Sylwester Nawrocki authored
Remove V4L2_MBUS_FMT_RGB565_2X8_BE media code entry as camera interface supports only packed YUYV formats. Signed-off-by:
-
Sylwester Nawrocki authored
Add missing kfree on the error path. Reported-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
-
Jarod Wilson authored
As pointed out on the lirc list by Andreas Dick, initial panel key repeat suppression wasn't working, as we had no timevals accumulated until after the first repeat. Also add a missing locking call. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
Courtesy of information from Andreas Dick on the lirc list. Signed-off-by:
-
Jarod Wilson authored
Hans Petter Selasky pointed out to me that we're leaking urbs when mce_async_out is called. Its used both for configuring the hardware and for transmitting IR data. In the tx case, mce_request_packet actually allocates both a urb and the transfer buffer, neither of which was being torn down. Do that in the tx callback. CC: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
There was a missing lock in fintek_suspend. Without the lock, its possible the system will be in the middle of receiving IR (draining the RX buffer) when we try to disable CIR interrupts. Signed-off-by:
-
Jarod Wilson authored
Store the cdev pointer in struct irctl, allocated dynamically as needed, rather than having a static array. At the same time, recycle some of the saved memory to nudge the maximum number of lirc devices supported up a ways -- its not that uncommon these days, now that we have the rc-core lirc bridge driver, to see a system with at least 4 raw IR receivers. (consider a mythtv backend with several video capture devices and the possible need for IR transmit hardware). Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Aside from the initial "hey, lets make sure we've flushed any pre-existing data on the device" call to mce_sync_in, every other one of the calls was entirely superfluous. Ergo, remove them all, and rename the one and only (questionably) useful one to reflect what it really does. Verified on both gen2 and gen3 hardware to make zero difference. Well, except that you no longer get a bunch of urb submit failures from the unneeded mce_sync_in calls. Oh. And move that flush to a point *after* we've wired up the inbound urb, or it won't do squat. I have half a mind to just remove it entirely, but someone thought it was necessary at some point, and it doesn't seem to hurt, so lets leave it for the time being. This excercise took place due to insightful questions asked by Hans Petter Selasky, about the possible reuse of the inbound urb before it was actually availble by mce_sync_in, so thanks to him for motivating this cleanup. Reported-by:
Hans Petter Selasky <hselasky@c2i.net> Signed-off-by:
-
Jarod Wilson authored
There's an SMK-device-id remote kit from I-O Data avaiable primarily in Japan, which appears to have no tx hardware, but has rx functionality that works with the mceusb driver by simply adding its device ID. Reported-by:
Jeremy Kwok <jeremykwok@desu.ca> Signed-off-by:
-
Jarod Wilson authored
Using dev_dbg is more complexity than many users are able to deal with. Make it easier to get debug spew feedback from them by adding an mce_dbg printk macro that spews using dev_info when debug=1 is set for the mceusb module. Signed-off-by:
-
- 01 Jun, 2011 12 commits
-
-
Mauro Carvalho Chehab authored
drivers/media/video/soc_camera.c: In function ‘soc_camera_video_start’: drivers/media/video/soc_camera.c:1515: warning: initialization discards qualifiers from pointer target type Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/uvc/uvc_entity.c: In function ‘uvc_mc_register_entities’: drivers/media/video/uvc/uvc_entity.c:33: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: -
Laurent Pinchart authored
The find_next_zero_bit() is called with the from and to arguments in the wrong order. This results in the function always returning 0, and all media devices being registered with minor 0. Furthermore, mdev->minor is then used before being assigned with the find_next_zero_bit() return value. This really makes sure we'll always use minor 0. Fix this and let the system support more than one media device. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by:
-
Hans Petter Selasky authored
The sonixj driver compares the value for nchg with: if (sd->nchg < -6 || sd->nchg >= 12) { With u8, negative values won't work. Signed-off-by:Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Sanjeev Premi authored
This patch fixes this compiler warning: drivers/media/video/omap3isp/isp.c: In function 'isp_isr_dbg': drivers/media/video/omap3isp/isp.c:392:2: warning: zero-length gnu_printf format string Signed-off-by:
Sanjeev Premi <premi@ti.com> Acked-by:
-
Laurent Pinchart authored
The name 'entity' is used twice in the macro body, once as the macro argument, and once as a structure field name. This breaks compilation if the macro is called with its argument not named 'entity'. Fix this by renaming the macro argument '__e'. This should avoid namespace clashes. Signed-off-by:
-
Ian Armstrong authored
Internally separates the setting of the broadcast standard for the encoder & decoder. Externally there's no change in functionality. [awalls@md.metrocast.net: Edited to fix a checkpatch gripe about multiple assignment and to remove a now unused DEFINE_WAIT() due to this patch] Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Ian Armstrong authored
Add sanity check to ivtvfb_pan_display() to ensure only valid values are used to pan the display. Invalid values are rejected with -EINVAL Signed-off-by:
-
Laurent Pinchart authored
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Also use the aligned fix.line_length and not the (possible) unaligned xres_virtual. Signed-off-by:
-
Ian Armstrong authored
Two ivtv_msleep_timeout() calls are incorrectly flagged as interruptable. The first is in the init sequence for a capture and is required for stable hardware setup. The second is at the end of the capture and used to handle the last data transfer. Failure to wait for this last transfer can result in stale data being read at the start of the next capture. Signed-off-by:
-
Antti Palosaari authored
Check I2C messages and return error properly. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jean-François Moine authored
The frame rate variable was not initialized, so, the lowest frame rate was used for most webcams. Signed-off-by:
-
