- 17 Aug, 2022 8 commits
-
-
Sylwester Dziedziuch authored
VF was not able to send tagged traffic when it didn't have any VLAN interfaces and VLAN anti-spoofing was enabled. Fix this by allowing VFs with no VLAN filters to send tagged traffic. After VF adds a VLAN interface it will be able to send tagged traffic matching VLAN filters only. Testing hints: 1. Spawn VF 2. Send tagged packet from a VF 3. The packet should be sent out and not dropped 4. Add a VLAN interface on VF 5. Send tagged packet on that VLAN interface 6. Packet should be sent out and not dropped 7. Send tagged packet with id different than VLAN interface 8. Packet should be dropped Fixes: daf4dd16 ("ice: Refactor spoofcheck configuration functions") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Benjamin Mikailenko authored
Commit 1273f895 ("ice: Fix broken IFF_ALLMULTI handling") introduced new checks when setting/clearing promiscuous mode. But if the requested promiscuous mode setting already exists, an -EEXIST error message would be printed. This is incorrect because promiscuous mode is either on/off and shouldn't print an error when the requested configuration is already set. This can happen when removing a bridge with two bonded interfaces and promiscuous most isn't fully cleared from VLAN VSI in hardware. Fix this by ignoring cases where requested promiscuous mode exists. Fixes: 1273f895 ("ice: Fix broken IFF_ALLMULTI handling") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Grzegorz Siwik authored
When at least two interfaces are bonded and a bridge is enabled on the bond, an error can occur when the bridge is removed and re-added. The reason for the error is because promiscuous mode was not fully cleared from the VLAN VSI in the hardware. With this change, promiscuous mode is properly removed when the bridge disconnects from bonding. [ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it [ 1033.676366] bond1: making interface enp175s0f0 the new active one [ 1033.676369] device enp95s0f0 left promiscuous mode [ 1033.676522] device enp175s0f0 entered promiscuous mode [ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it [ 1041.944874] device enp175s0f0 left promiscuous mode [ 1041.944918] bond1: now running without any active interface! Fixes: c31af68a ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Grzegorz Siwik authored
Ignore EEXIST error when setting promiscuous mode. This fix is needed because the driver could set promiscuous mode when it still has not cleared properly. Promiscuous mode could be set only once, so setting it second time will be rejected. Fixes: 5eda8afd ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Grzegorz Siwik authored
Avoid enabling or disabling VLAN 0 when trying to set promiscuous VLAN mode if double VLAN mode is enabled. This fix is needed because the driver tries to add the VLAN 0 filter twice (once for inner and once for outer) when double VLAN mode is enabled. The filter program is rejected by the firmware when double VLAN is enabled, because the promiscuous filter only needs to be set once. This issue was missed in the initial implementation of double VLAN mode. Fixes: 5eda8afd ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
==================== Intel Wired LAN Driver Updates 2022-08-16) This series contains updates to i40e driver only. Przemyslaw fixes issue with checksum offload on VXLAN tunnels. Alan disables VSI for Tx timeout when all recovery methods have failed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Even though the normal strparser's init function has a return value we got away with ignoring errors until now, as it only validates the parameters and we were passing correct parameters. tls_strp can fail to init on memory allocation errors, which syzbot duly induced and reported. Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhengchao Shao authored
In the gnet_stats_add_queue_cpu function, the qstats->qlen statistics are incorrectly set to qcpu->backlog. Fixes: 448e163f ("gen_stats: Add gnet_stats_add_queue()") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220815030848.276746-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 16 Aug, 2022 5 commits
-
-
Alan Brady authored
When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Przemyslaw Patynowski authored
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \ enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Without this patch, TX descriptor was using wrong data, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: b4fb2d33 ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-12 (iavf) This series contains updates to iavf driver only. Przemyslaw frees memory for admin queues in initialization error paths, prevents freeing of vf_res which is causing null pointer dereference, and adjusts calls in error path of reset to avoid iavf_close() which could cause deadlock. Ivan Vecera avoids deadlock that can occur when driver if part of failover. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix deadlock in initialization iavf: Fix reset error handling iavf: Fix NULL pointer dereference in iavf_get_link_ksettings iavf: Fix adminq error handling ==================== Link: https://lore.kernel.org/r/20220812172309.853230-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zhengchao Shao authored
When bulk delete command is received in the rtnetlink_rcv_msg function, if bulk delete is not supported, module_put is not called to release the reference counting. As a result, module reference count is leaked. Fixes: a6cec0bc ("net: rtnetlink: add bulk delete support flag") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sergei Antonov authored
dma_map_single() calls fail in moxart_mac_setup_desc_ring() and moxart_mac_start_xmit() which leads to an incessant output of this: [ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error Passing pdev to DMA is a common approach among net drivers. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 15 Aug, 2022 11 commits
-
-
David S. Miller authored
Petr Machata says: ==================== mlxsw: Fixes for PTP support This set fixes several issues in mlxsw PTP code. - Patch #1 fixes compilation warnings. - Patch #2 adjusts the order of operation during cleanup, thereby closing the window after PTP state was already cleaned in the ASIC for the given port, but before the port is removed, when the user could still in theory make changes to the configuration. - Patch #3 protects the PTP configuration with a custom mutex, instead of relying on RTNL, which is not held in all access paths. - Patch #4 forbids enablement of PTP only in RX or only in TX. The driver implicitly assumed this would be the case, but neglected to sanitize the configuration. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Currently mlxsw driver configures one global PTP configuration for all ports. The reason is that the switch behaves like a transparent clock between CPU port and front-panel ports. When time stamp is enabled in any port, the hardware is configured to update the correction field. The fact that the configuration of CPU port affects all the ports, makes the correction field update to be global for all ports. Otherwise, user will see odd values in the correction field, as the switch will update the correction field in the CPU port, but not in all the front-panel ports. The CPU port is relevant in both RX and TX, so to avoid problematic configuration, forbid PTP enablement only in one direction, i.e., only in RX or TX. Without the change: $ hwstamp_ctl -i swp1 -r 12 -t 0 current settings: tx_type 0 rx_filter 0 new settings: tx_type 0 rx_filter 2 $ echo $? 0 With the change: $ hwstamp_ctl -i swp1 -r 12 -t 0 current settings: tx_type 1 rx_filter 2 SIOCSHWTSTAMP failed: Invalid argument Fixes: 08ef8bc8 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Currently the functions mlxsw_sp2_ptp_{configure, deconfigure}_port() assume that they are called when RTNL is locked and they warn otherwise. The deconfigure function can be called when port is removed, for example as part of device reload, then there is no locked RTNL and the function warns [1]. To avoid such case, do not assume that RTNL protects this code, add a dedicated mutex instead. The mutex protects 'ptp_state->config' which stores the existing global configuration in hardware. Use this mutex also to protect the code which configures the hardware. Then, there will be only one configuration in any time, which will be updated in 'ptp_state' and a race will be avoided. [1]: RTNL: assertion failed at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c (1600) WARNING: CPU: 1 PID: 1583493 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1600 mlxsw_sp2_ptp_hwtstamp_set+0x2d3/0x300 [mlxsw_spectrum] [...] CPU: 1 PID: 1583493 Comm: devlink Not tainted5.19.0-rc8-custom-127022-gb371dffda095 #789 Hardware name: Mellanox Technologies Ltd.MSN3420/VMOD0005, BIOS 5.11 01/06/2019 RIP: 0010:mlxsw_sp2_ptp_hwtstamp_set+0x2d3/0x300[mlxsw_spectrum] [...] Call Trace: <TASK> mlxsw_sp_port_remove+0x7e/0x190 [mlxsw_spectrum] mlxsw_sp_fini+0xd1/0x270 [mlxsw_spectrum] mlxsw_core_bus_device_unregister+0x55/0x280 [mlxsw_core] mlxsw_devlink_core_bus_device_reload_down+0x1c/0x30[mlxsw_core] devlink_reload+0x1ee/0x230 devlink_nl_cmd_reload+0x4de/0x580 genl_family_rcv_msg_doit+0xdc/0x140 genl_rcv_msg+0xd7/0x1d0 netlink_rcv_skb+0x49/0xf0 genl_rcv+0x1f/0x30 netlink_unicast+0x22f/0x350 netlink_sendmsg+0x208/0x440 __sys_sendto+0xf0/0x140 __x64_sys_sendto+0x1b/0x20 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 08ef8bc8 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Reported-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Currently as part of removing port, PTP API is called to clear the existing configuration and set the 'rx_filter' and 'tx_type' to zero. The clearing is done before unregistering the netdevice, which means that there is a window of time in which the user can reconfigure PTP in the port, and this configuration will not be cleared. Reorder the operations, clear PTP configuration after unregistering the netdevice. Fixes: 87486427 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
In case that 'CONFIG_PTP_1588_CLOCK' is not enabled in the config file, there are implementations for the functions mlxsw_{sp,sp2}_ptp_txhdr_construct() as part of 'spectrum_ptp.h'. In this case, they should be defined as 'static' as they are not supposed to be used out of this file. Make the functions 'static', otherwise the following warnings are returned: "warning: no previous prototype for 'mlxsw_sp_ptp_txhdr_construct'" "warning: no previous prototype for 'mlxsw_sp2_ptp_txhdr_construct'" In addition, make the functions 'inline' for case that 'spectrum_ptp.h' will be included anywhere else and the functions would probably not be used, so compilation warnings about unused static will be returned. Fixes: 24157bc6 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Follows up on: https://lore.kernel.org/all/20220809170518.164662-1-cascardo@canonical.com/ handle of 0 implies from/to of universe realm which is not very sensible. Lets see what this patch will do: $sudo tc qdisc add dev $DEV root handle 1:0 prio //lets manufacture a way to insert handle of 0 $sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 \ route to 0 from 0 classid 1:10 action ok //gets rejected... Error: handle of 0 is not valid. We have an error talking to the kernel, -1 //lets create a legit entry.. sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 route from 10 \ classid 1:10 action ok //what did the kernel insert? $sudo tc filter ls dev $DEV parent 1:0 filter protocol ip pref 100 route chain 0 filter protocol ip pref 100 route chain 0 fh 0x000a8000 flowid 1:10 from 10 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 //Lets try to replace that legit entry with a handle of 0 $ sudo tc filter replace dev $DEV parent 1:0 protocol ip prio 100 \ handle 0x000a8000 route to 0 from 0 classid 1:10 action drop Error: Replacing with handle of 0 is invalid. We have an error talking to the kernel, -1 And last, lets run Cascardo's POC: $ ./poc 0 0 -22 -22 -22 Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Xiong authored
The issue happens on specific paths in the function. After both the object `rt` and `neigh` are grabbed successfully, when `lifetime` is nonzero but the metric needs change, the function just deletes the route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh` again if above conditions hold. The function simply overwrite `neigh` if succeeds or returns if fails, without decreasing the reference count of previous `neigh`. This may result in memory leaks. Fix it by decrementing the reference count of `neigh` in place. Fixes: 6b2e04bc ("net: allow user to set metric on default route learned via Router Advertisement") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/netDavid S. Miller authored
-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-11 (ice) This series contains updates to ice driver only. Benjamin corrects a misplaced parenthesis for a WARN_ON check. Michal removes WARN_ON from a check as its recoverable and not warranting of a call trace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Mikhalitsyn authored
Right now we have a neigh_param PROXY_QLEN which specifies maximum length of neigh_table->proxy_queue. But in fact, this limitation doesn't work well because check condition looks like: tbl->proxy_queue.qlen > NEIGH_VAR(p, PROXY_QLEN) The problem is that p (struct neigh_parms) is a per-device thing, but tbl (struct neigh_table) is a system-wide global thing. It seems reasonable to make proxy_queue limit per-device based. v2: - nothing changed in this patch v3: - rebase to net tree Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@kernel.org> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Christian Brauner <brauner@kernel.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: kernel@openvz.org Cc: devel@openvz.org Suggested-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
Normal processing of ARP request (usually this is Ethernet broadcast packet) coming to the host is looking like the following: * the packet comes to arp_process() call and is passed through routing procedure * the request is put into the queue using pneigh_enqueue() if corresponding ARP record is not local (common case for container records on the host) * the request is processed by timer (within 80 jiffies by default) and ARP reply is sent from the same arp_process() using NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED condition (flag is set inside pneigh_enqueue()) And here the problem comes. Linux kernel calls pneigh_queue_purge() which destroys the whole queue of ARP requests on ANY network interface start/stop event through __neigh_ifdown(). This is actually not a problem within the original world as network interface start/stop was accessible to the host 'root' only, which could do more destructive things. But the world is changed and there are Linux containers available. Here container 'root' has an access to this API and could be considered as untrusted user in the hosting (container's) world. Thus there is an attack vector to other containers on node when container's root will endlessly start/stop interfaces. We have observed similar situation on a real production node when docker container was doing such activity and thus other containers on the node become not accessible. The patch proposed doing very simple thing. It drops only packets from the same namespace in the pneigh_queue_purge() where network interface state change is detected. This is enough to prevent the problem for the whole node preserving original semantics of the code. v2: - do del_timer_sync() if queue is empty after pneigh_queue_purge() v3: - rebase to net tree Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@kernel.org> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Christian Brauner <brauner@kernel.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: kernel@openvz.org Cc: devel@openvz.org Investigated-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxim Kochetkov authored
MHI channel may generates event/interrupt right after enabling. It may leads to 2 race conditions issues. 1) Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check: if (!qdev || mhi_res->transaction_status) return; Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at this moment. In this situation qrtr-ns will be unable to enumerate services in device. --------------------------------------------------------------- 2) Such event may come at the moment after dev_set_drvdata() and before qrtr_endpoint_register(). In this case kernel will panic with accessing wrong pointer at qcom_mhi_qrtr_dl_callback(): rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr, mhi_res->bytes_xferd); Because endpoint is not created yet. -------------------------------------------------------------- So move mhi_prepare_for_transfer_autoqueue after endpoint creation to fix it. Fixes: a2e2cc0d ("net: qrtr: Start MHI channels during init") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Aug, 2022 3 commits
-
-
Hongbin Wang authored
Functions ip6_tnl_change, ip6_tnl_update and ip6_tnl0_update do always return 0, change the type of functions to void. Signed-off-by: Hongbin Wang <wh_bin@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Antonov authored
If the port isn't a CPU port nor a user port, 'cpu_dp' is a null pointer and a crash happened on dereferencing it in mv88e6060_setup_port(): [ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014 ... [ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84 [ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54 [ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0 [ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c [ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c [ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0 [ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184 [ 9.986632] __device_attach from bus_probe_device+0x8c/0x94 [ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8 [ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c [ 10.006292] process_one_work from worker_thread+0x30/0x4b8 [ 10.012155] worker_thread from kthread+0xd4/0x10c [ 10.017238] kthread from ret_from_fork+0x14/0x3c Fixes: 0abfd494 ("net: dsa: use dedicated CPU port") CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Csókás Bence authored
Code reimplements functionality already in `fec_ptp_read()`, but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call. Fixes: 28b5f058 ("net: fec: ptp: fix convergence issue to support LinuxPTP stack") Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.huSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 12 Aug, 2022 12 commits
-
-
Ivan Vecera authored
Fix deadlock that occurs when iavf interface is a part of failover configuration. 1. Mutex crit_lock is taken at the beginning of iavf_watchdog_task() 2. Function iavf_init_config_adapter() is called when adapter state is __IAVF_INIT_CONFIG_ADAPTER 3. iavf_init_config_adapter() calls register_netdevice() that emits NETDEV_REGISTER event 4. Notifier function failover_event() then calls net_failover_slave_register() that calls dev_open() 5. dev_open() calls iavf_open() that tries to take crit_lock in end-less loop Stack trace: ... [ 790.251876] usleep_range_state+0x5b/0x80 [ 790.252547] iavf_open+0x37/0x1d0 [iavf] [ 790.253139] __dev_open+0xcd/0x160 [ 790.253699] dev_open+0x47/0x90 [ 790.254323] net_failover_slave_register+0x122/0x220 [net_failover] [ 790.255213] failover_slave_register.part.7+0xd2/0x180 [failover] [ 790.256050] failover_event+0x122/0x1ab [failover] [ 790.256821] notifier_call_chain+0x47/0x70 [ 790.257510] register_netdevice+0x20f/0x550 [ 790.258263] iavf_watchdog_task+0x7c8/0xea0 [iavf] [ 790.259009] process_one_work+0x1a7/0x360 [ 790.259705] worker_thread+0x30/0x390 To fix the situation we should check the current adapter state after first unsuccessful mutex_trylock() and return with -EBUSY if it is __IAVF_INIT_CONFIG_ADAPTER. Fixes: 226d5285 ("iavf: fix locking of critical sections") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Przemyslaw Patynowski authored
Do not call iavf_close in iavf_reset_task error handling. Doing so can lead to double call of napi_disable, which can lead to deadlock there. Removing VF would lead to iavf_remove task being stuck, because it requires crit_lock, which is held by iavf_close. Call iavf_disable_vf if reset fail, so that driver will clean up remaining invalid resources. During rapid VF resets, HW can fail to setup VF mailbox. Wrong error handling can lead to iavf_remove being stuck with: [ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53 ... [ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds. [ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce370-dirty #1 [ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000 [ 5267.190347] Call Trace: [ 5267.190647] <TASK> [ 5267.190927] __schedule+0x460/0x9f0 [ 5267.191264] schedule+0x44/0xb0 [ 5267.191563] schedule_preempt_disabled+0x14/0x20 [ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0 [ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf] [ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf] [ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40 [ 5267.193285] pci_device_remove+0x36/0xb0 [ 5267.193619] device_release_driver_internal+0xc1/0x150 [ 5267.193974] pci_stop_bus_device+0x69/0x90 [ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20 [ 5267.194735] pci_iov_remove_virtfn+0xba/0x120 [ 5267.195130] sriov_disable+0x2f/0xe0 [ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice] [ 5267.196056] ? pci_get_device+0x4f/0x70 [ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice] [ 5267.196995] sriov_numvfs_store+0xfe/0x140 [ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0 [ 5267.197918] new_sync_write+0x10c/0x190 [ 5267.198404] vfs_write+0x24e/0x2d0 [ 5267.198886] ksys_write+0x5c/0xd0 [ 5267.199367] do_syscall_64+0x3a/0x80 [ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 5267.200317] RIP: 0033:0x7f5b381205c8 [ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8 [ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001 [ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820 [ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0 [ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002 [ 5267.206041] </TASK> [ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks [ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce370-dirty #1 [ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 5267.209623] Call Trace: [ 5267.210569] <TASK> [ 5267.211480] dump_stack_lvl+0x33/0x42 [ 5267.212472] panic+0x107/0x294 [ 5267.213467] watchdog.cold.8+0xc/0xbb [ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30 [ 5267.215511] kthread+0xf4/0x120 [ 5267.216459] ? kthread_complete_and_exit+0x20/0x20 [ 5267.217505] ret_from_fork+0x22/0x30 [ 5267.218459] </TASK> Fixes: f0db7892 ("i40evf: use netdev variable in reset task") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Przemyslaw Patynowski authored
Fix possible NULL pointer dereference, due to freeing of adapter->vf_res in iavf_init_get_resources. Previous commit introduced a regression, where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config would free adapter->vf_res. However, netdev is still registered, so ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res, will result with: [ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9385.242683] #PF: supervisor read access in kernel mode [ 9385.242686] #PF: error_code(0x0000) - not-present page [ 9385.242690] PGD 0 P4D 0 [ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce370-dirty #1 [ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf] [ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20 [ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246 [ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000 [ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000 [ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00 [ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000 [ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1 [ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000 [ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0 [ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9385.242787] Call Trace: [ 9385.242791] <TASK> [ 9385.242793] ethtool_get_settings+0x71/0x1a0 [ 9385.242814] __dev_ethtool+0x426/0x2f40 [ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280 [ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0 [ 9385.242841] ? dev_ethtool+0x59/0x170 [ 9385.242848] dev_ethtool+0xa7/0x170 [ 9385.242856] dev_ioctl+0xc3/0x520 [ 9385.242866] sock_do_ioctl+0xa0/0xe0 [ 9385.242877] sock_ioctl+0x22f/0x320 [ 9385.242885] __x64_sys_ioctl+0x84/0xc0 [ 9385.242896] do_syscall_64+0x3a/0x80 [ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 9385.242918] RIP: 0033:0x7f93702396db [ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48 [ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db [ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007 [ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330 [ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80 [ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0 [ 9385.242948] </TASK> [ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support ice irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl i40e pcspkr intel_cstate joydev mei_me intel_uncore mxm_wmi mei ipmi_ssif lpc_ich ipmi_si acpi_power_meter xfs libcrc32c mgag200 i2c_algo_bit drm_shmem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft crc64 syscopyarea sg sysfillrect sysimgblt fb_sys_fops drm ixgbe ahci libahci libata crc32c_intel mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 9385.243065] [last unloaded: iavf] Dereference happens in if (ADV_LINK_SUPPORT(adapter)) statement Fixes: 209f2f9c ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Przemyslaw Patynowski authored
iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fixes: d358aa9a ("i40evf: init code and hardware support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Li Qiong authored
The platform_get_irq_byname() returns non-zero IRQ number or negative error number. "if (irq)" always true, chang it to "if (irq > 0)" Signed-off-by: Li Qiong <liqiong@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
The double `is' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
Using native endian-ness for device supplied fields is wrong on BE platforms. Sparse warns about this. Fixes: 91f41f01 ("drivers/net/virtio_net: Added RSS hash report.") Cc: "Andrew Melnychenko" <andrew@daynix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Xiong authored
The issue happens on some error handling paths. When the function fails to grab the object `xprt`, it simply returns 0, forgetting to decrease the reference count of another object `xps`, which is increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount leaks. Also, the function forgets to check whether `xps` is valid before using it, which may result in NULL-dereferencing issues. Fix it by adding proper error handling code when either `xprt` or `xps` is NULL. Fixes: 5b7eb784 ("SUNRPC: take a xprt offline using sysfs") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jilin Yuan authored
Delete the redundant word 'the'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikulas Patocka authored
The functions clear_bit and set_bit do not imply a memory barrier, thus it may be possible that the waitqueue_active function (which does not take any locks) is moved before clear_bit and it could miss a wakeup event. Fix this bug by adding a memory barrier after clear_bit. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Aug, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf, can and netfilter. A little larger than usual but it's all fixes, no late features. It's large partially because of timing, and partially because of follow ups to stuff that got merged a week or so before the merge window and wasn't as widely tested. Maybe the Bluetooth fixes are a little alarming so we'll address that, but the rest seems okay and not scary. Notably we're including a fix for the netfilter Kconfig [1], your WiFi warning [2] and a bluetooth fix which should unblock syzbot [3]. Current release - regressions: - Bluetooth: - don't try to cancel uninitialized works [3] - L2CAP: fix use-after-free caused by l2cap_chan_put - tls: rx: fix device offload after recent rework - devlink: fix UAF on failed reload and leftover locks in mlxsw Current release - new code bugs: - netfilter: - flowtable: fix incorrect Kconfig dependencies [1] - nf_tables: fix crash when nf_trace is enabled - bpf: - use proper target btf when exporting attach_btf_obj_id - arm64: fixes for bpf trampoline support - Bluetooth: - ISO: unlock on error path in iso_sock_setsockopt() - ISO: fix info leak in iso_sock_getsockopt() - ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP - ISO: fix memory corruption on iso_pinfo.base - ISO: fix not using the correct QoS - hci_conn: fix updating ISO QoS PHY - phy: dp83867: fix get nvmem cell fail Previous releases - regressions: - wifi: cfg80211: fix validating BSS pointers in __cfg80211_connect_result [2] - atm: bring back zatm uAPI after ATM had been removed - properly fix old bug making bonding ARP monitor mode not being able to work with software devices with lockless Tx - tap: fix null-deref on skb->dev in dev_parse_header_protocol - revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some devices and breaks others - netfilter: - nf_tables: many fixes rejecting cross-object linking which may lead to UAFs - nf_tables: fix null deref due to zeroed list head - nf_tables: validate variable length element extension - bgmac: fix a BUG triggered by wrong bytes_compl - bcmgenet: indicate MAC is in charge of PHY PM Previous releases - always broken: - bpf: - fix bad pointer deref in bpf_sys_bpf() injected via test infra - disallow non-builtin bpf programs calling the prog_run command - don't reinit map value in prealloc_lru_pop - fix UAFs during the read of map iterator fd - fix invalidity check for values in sk local storage map - reject sleepable program for non-resched map iterator - mptcp: - move subflow cleanup in mptcp_destroy_common() - do not queue data on closed subflows - virtio_net: fix memory leak inside XDP_TX with mergeable - vsock: fix memory leak when multiple threads try to connect() - rework sk_user_data sharing to prevent psock leaks - geneve: fix TOS inheriting for ipv4 - tunnels & drivers: do not use RT_TOS for IPv6 flowlabel - phy: c45 baset1: do not skip aneg configuration if clock role is not specified - rose: avoid overflow when /proc displays timer information - x25: fix call timeouts in blocking connects - can: mcp251x: fix race condition on receive interrupt - can: j1939: - replace user-reachable WARN_ON_ONCE() with netdev_warn_once() - fix memory leak of skbs in j1939_session_destroy() Misc: - docs: bpf: clarify that many things are not uAPI - seg6: initialize induction variable to first valid array index (to silence clang vs objtool warning) - can: ems_usb: fix clang 14's -Wunaligned-access warning" * tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits) net: atm: bring back zatm uAPI dpaa2-eth: trace the allocated address instead of page struct net: add missing kdoc for struct genl_multicast_group::flags nfp: fix use-after-free in area_cache_get() MAINTAINERS: use my korg address for mt7601u mlxsw: minimal: Fix deadlock in ports creation bonding: fix reference count leak in balance-alb mode net: usb: qmi_wwan: Add support for Cinterion MV32 bpf: Shut up kern_sys_bpf warning. net/tls: Use RCU API to access tls_ctx->netdev tls: rx: device: don't try to copy too much on detach tls: rx: device: bound the frag walk net_sched: cls_route: remove from list when handle is 0 selftests: forwarding: Fix failing tests with old libnet net: refactor bpf_sk_reuseport_detach() net: fix refcount bug in sk_psock_get (2) selftests/bpf: Ensure sleepable program is rejected by hash map iter selftests/bpf: Add write tests for sk local storage map iterator selftests/bpf: Add tests for reading a dangling map iter fd bpf: Only allow sleepable program for resched-able iterator ...
-