- 12 Jun, 2023 24 commits
-
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of a mix of subflows in v4 and v6 by the in-kernel PM introduced by commit b9d69db8 ("mptcp: let the in-kernel PM use mixed IPv4 and IPv6 addresses"). It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ad349374 ("selftests: mptcp: add test-cases for mixed v4/v6 subflows") Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
The alignment was different from the other tests because tabs were used instead of spaces. While at it, also use 'echo' instead of 'printf' to print the result to keep the same style as done in the other sub-tests. And, even if it should be better with, also remove 'stdbuf' and sed's '--unbuffered' option because they are not used in the other subtests and they are not available when using a minimal environment with busybox. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d0232 ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of PM listener events introduced by commit f8c9dfbd ("mptcp: add pm listener events"). It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d0232 ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of sending an MP_PRIO signal for the initial subflow, introduced by commit c157bbe7 ("mptcp: allow the in kernel PM to set MPC subflow priority"). It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 914f6a59 ("selftests: mptcp: add MPC backup tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the MP_FAIL / infinite mapping introduced by commit 1e39e5a3 ("mptcp: infinite mapping sending") and the following ones. It is possible to look for one of the infinite mapping counters to know in advance if the this feature is available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b6e074e1 ("selftests: mptcp: add infinite map testcase") Cc: stable@vger.kernel.org Fixes: 2ba18161 ("selftests: mptcp: add MP_FAIL reset testcase") Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the userspace PM introduced by commit 4638de5a ("mptcp: handle local addrs announced by userspace PMs") and the following ones. It is possible to look for the MPTCP pm_type's sysctl knob to know in advance if the userspace PM is available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5ac1d2d6 ("selftests: mptcp: Add tests for userspace PM type") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the fullmesh flag for the in-kernel PM introduced by commit 2843ff6f ("mptcp: remote addresses fullmesh") and commit 1a0d6136 ("mptcp: local addresses fullmesh"). It looks like there is no easy external sign we can use to predict the expected behaviour. We could add the flag and then check if it has been added but for that, and for each fullmesh test, we would need to setup a new environment, do the checks, clean it and then only start the test from yet another clean environment. To keep it simple and avoid introducing new issues, we look for a specific kernel version. That's not ideal but an acceptable solution for this case. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6a0653b9 ("selftests: mptcp: add fullmesh setting tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Commit bccefb76 ("selftests: mptcp: simplify pm_nl_change_endpoint") has simplified the way the backup flag is set on an endpoint. Instead of doing: ./pm_nl_ctl set 10.0.2.1 flags backup Now we do: ./pm_nl_ctl set id 1 flags backup The new way is easier to maintain but it is also incompatible with older kernels not supporting the implicit endpoints putting in place the infrastructure to set flags per ID, hence the second Fixes tag. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: bccefb76 ("selftests: mptcp: simplify pm_nl_change_endpoint") Cc: stable@vger.kernel.org Fixes: 4cf86ae8 ("mptcp: strict local address ID selection") Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the implicit endpoints introduced by commit d045b9eb ("mptcp: introduce implicit endpoints"). It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results. Note that here and in the following commits, we re-do the same check for each sub-test of the same function for a few reasons. The main one is not to break the ID assign to each test in order to be able to easily compare results between different kernel versions. Also, we can still run a specific test even if it is skipped. Another reason is that it makes it clear during the review that a specific subtest will be skipped or not under certain conditions. At the end, it looks OK to call the exact same helper multiple times: it is not a critical path and it is the same code that is executed, not really more cases to maintain. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 69c6ce7b ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a UAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features. It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6fa0174a ("mptcp: more careful RM_ADDR generation") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of MP_FASTCLOSE introduced in commit f284c0c7 ("mptcp: implement fastclose xmit path"). If the MIB counter is not available, the test cannot be verified and the behaviour will not be the expected one. So we can skip the test if the counter is missing. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 01542c9b ("selftests: mptcp: add fastclose testcase") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a uAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features. It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance what the behaviour we are expecting here instead of supporting the two behaviours. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 86e39e04 ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Some tests are using IPTables and/or TC commands to force some behaviours. If one of these commands fails -- likely because some features are not available due to missing kernel config -- we should intercept the error and skip the tests requiring these features. Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped. This patch also replaces the 'exit 1' by 'return 1' not to stop the selftest in the middle without the conclusion if there is an issue with NF or TC. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP MIB counters introduced in commit fc518953 ("mptcp: add and use MIB counter infrastructure") and more later. The MPTCP Join selftest heavily relies on these counters. If a counter is not supported by the kernel, it is not displayed when using 'nstat -z'. We can then detect that and skip the verification. A new helper (get_counter()) has been added to do the required checks and return an error if the counter is not available. Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped. This new helper also makes sure we get the exact counter we want to avoid issues we had in the past, e.g. with MPTcpExtRmAddr and MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the way we fetch a MIB counter. Note for the backports: we rarely change these modified blocks so if there is are conflicts, it is very likely because a counter is not used in the older kernels and we don't need that chunk. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf24 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Here are some helpers that will be used to mark subtests as skipped if a feature is not supported. Marking as a fix for the commit introducing this selftest to help with the backports. While at it, also check if kallsyms feature is available as it will also be used in the following commits to check if MPTCP features are available before starting a test. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf24 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
IPTables commands using 'iptables-nft' fail on old kernels, at least 5.15 because it doesn't see the default IPTables chains: $ iptables -L iptables/1.8.2 Failed to initialize nft: Protocol not supported As a first step before switching to NFTables, we can use iptables-legacy if available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. A new function is now available to easily detect if a feature is missing by looking at the kernel version. That's clearly not ideal and this kind of check should be avoided as soon as possible. But sometimes, there are no external sign that a "feature" is available or not: internal behaviours can change without modifying the uAPI and these selftests are verifying the internal behaviours. Sometimes, the only (easy) way to verify if the feature is present is to run the test but then the validation cannot determine if there is a failure with the feature or if the feature is missing. Then it looks better to check the kernel version instead of having tests that can never fail. In any case, we need a solution not to have a whole selftest being marked as failed just because one sub-test has failed. Note that this env var car be set to 1 not to do such check and run the linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK. This new helper is going to be used in the following commits. In order to ease the backport of such future patches, it would be good if this patch is backported up to the introduction of MPTCP selftests, hence the Fixes tag below: this type of check was supposed to be done from the beginning. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Signed-off-by:
-
Jakub Kicinski authored
Maxime Chevallier says: ==================== fixes for Q-USGMII speeds and autoneg This is the second version of a small changeset for QUSGMII support, fixing inconsistencies in reported max speed and control word parsing. As reported here [1], there are some inconsistencies for the Q-USGMII mode speeds and configuration. The first patch in this fixup series makes so that we correctly report the max speed of 1Gbps for this mode. The second patch uses a dedicated helper to decode the control word. This is necessary as although USGMII control words are close to USXGMII, they don't support the same speeds. [1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/ ==================== Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.comSigned-off-by:
-
Maxime Chevallier authored
Q-USGMII is a derivative of USGMII, that uses a specific formatting for the control word. The layout is close to the USXGMII control word, but doesn't support speeds over 1Gbps. Use a dedicated decoding logic for the USGMII control word, re-using USXGMII definitions but only considering 10/100/1000Mbps speeds Fixes: 5e61fe15 ("net: phy: Introduce QUSGMII PHY mode") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Maxime Chevallier authored
Q-USGMII is the quad port version of USGMII, and supports a max speed of 1Gbps on each line. Make so that phylink_interface_max_speed() reports this information correctly. Fixes: ae0e4bb2 ("net: phylink: Adjust link settings based on rate matching") Signed-off-by:
-
Dan Carpenter authored
The sctp_sf_eat_auth() function is supposed to enum sctp_disposition values and returning a kernel error code will cause issues in the caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition values but if the call to sctp_ulpevent_make_authkey() fails, it returns -ENOMEM. This results in calling BUG() inside the sctp_side_effects() function. Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE() instead. This code predates git. Signed-off-by:
-
Hangbin Liu authored
The commit 59a0b022 ("ipvlan: Make skb->skb_iif track skb->dev for l3s mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which is skb->skb_iif when there is no route. But for IPv6, the fix is not enough, because in ipv6_raw_deliver() -> raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part issue. Let's set IP6CB(skb)->iif to correct ifindex. BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6. Fixes: c675e06a ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by:
-
Jakub Kicinski authored
When compiling YNL generated code compiler complains about array-initializer-out-of-bounds. Turns out the MAX value for STATS_GRP uses the value for STATS. This may lead to random corruptions in user space (kernel itself doesn't use this value as it never parses stats). Fixes: f09ea6fb ("ethtool: add a new command for reading standard stats") Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
- 10 Jun, 2023 16 commits
-
-
David Christensen authored
In the last step of the EEH recovery process, the EEH driver calls into bnx2x_io_resume() to re-initialize the NIC hardware via the function bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and hardware resources are released and an error code is returned to the caller. When called from bnx2x_io_resume(), the return code is ignored and the network interface is brought up unconditionally. Later attempts to send a packet via this interface result in a page fault due to a null pointer reference. This patch checks the return code of bnx2x_nic_load(), prints an error message if necessary, and does not enable the interface. Signed-off-by:
David Christensen <drc@linux.vnet.ibm.com> Reviewed-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
netfilter pull request 23-06-08 Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Add commit and abort set operation to pipapo set abort path. 2) Bail out immediately in case of ENOMEM in nfnetlink batch. 3) Incorrect error path handling when creating a new rule leads to dangling pointer in set transaction list. ==================== Signed-off-by: -
Dmitry Mastykin authored
There is a shift wrapping bug in this code on 32-bit architectures. NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long. Every second 32-bit word of catmap becomes corrupted. Signed-off-by:
Dmitry Mastykin <dmastykin@astralinux.ru> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
David S. Miller authored
Naveen Mamindlapalli says: ==================== RVU NIX AF driver fixes This patch series contains few fixes to the RVU NIX AF driver. The first patch modifies the driver check to validate whether the req count for contiguous and non-contiguous arrays is less than the maximum limit. The second patch fixes HW lbk interface link credit programming. ==================== Signed-off-by: -
Nithin Dabilpuram authored
Fix LBK link credits on CN10K to be same as CN9K i.e 16 * MAX_LBK_DATA_RATE instead of current scheme of calculation based on LBK buf length / FIFO size. Fixes: 6e54e1c5 ("octeontx2-af: cn10K: Add MTU configuration") Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by:
-
Satha Rao authored
txschq_alloc response have two different arrays to store continuous and non-continuous schedulers of each level. Requested count should be checked for each array separately. Fixes: 5d9b976d ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by:
Satha Rao <skoteshwar@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-08 (ice) This series contains updates to ice driver only. Simon Horman stops null pointer dereference for GNSS error path. Kamil fixes memory leak when downing interface when XDP is enabled. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix XDP memory leak when NIC is brought up and down ice: Don't dereference NULL in ice_gnss_read error path ==================== Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Ahmed Zaki authored
Enable more than 32 IRQs by removing the u32 bit mask in iavf_irq_enable_queues(). There is no need for the mask as there are no callers that select individual IRQs through the bitmask. Also, if the PF allocates more than 32 IRQs, this mask will prevent us from using all of them. Modify the comment in iavf_register.h to show that the maximum number allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1]. link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c5 ("i40evf: main driver core") Signed-off-by:
Ahmed Zaki <ahmed.zaki@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== selftests: mptcp: skip tests not supported by old kernels (part 2) After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues. Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace. In addition to that, the current MPTCP selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels. To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftests or just some sub-tests before starting them. This cannot be applied in all cases. This second part focuses on marking different sub-tests as skipped if some MPTCP features are not supported. A few techniques are used here: - Before starting some tests: - Check if a file (sysctl knob) is present: that's what patch 13/14 is doing for the userspace PM feature. - Check if a symbol is present in /proc/kallsyms: patch 1/14 adds some helpers in mptcp_lib.sh to ease its use. Then these helpers are used in patches 2, 3, 4, 10, 11 and 14/14. - Set a flag and get the status to check if a feature is supported: patch 8/14 is doing that with the 'fullmesh' flag. - After having launched the tests: - Retrieve the counters after a test and check if they are different than 0. Similar to the check with the flag, that's not ideal but in this case, the counters were already present before the introduction of MPTCP but they have been supported by MPTCP sockets only later. Patches 5 and 6/14 are using this technique. Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var value is checked: if it is set to 1, the test is marked as "failed" instead of "skipped". MPTCP public CI expects to have all features supported and it sets this env var to 1 to catch regressions in these new checks. Patches 7/14 and 9/14 are a bit different because they don't skip tests: - Patch 7/14 retrieves the default values instead of using hardcoded ones because these default values have been modified at some points. Then the comparisons are done with the default values. - patch 9/14 relaxes the expected returned size from MPTCP's getsockopt because the different structures gathering various info can get new fields and get bigger over time. We cannot expect that the userspace is using the same structure as the kernel. Patch 12/14 marks the test as "skipped" instead of "failed" if the "ip" tool is not available. In this second part, the "mptcp_join" selftest is not modified yet. This will come soon after in the third part with quite a few patches. Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 ==================== Link: https://lore.kernel.org/r/20230608-upstream-net-20230608-mptcp-selftests-support-old-kernels-part-2-v1-0-20997a6fd841@tessares.netSigned-off-by: -
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the new listener events linked to the path-manager introduced by commit f8c9dfbd ("mptcp: add pm listener events"). It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature and skip these sub-tests if the feature is not supported. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6c73008a ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP Userspace PM introduced by commit 4638de5a ("mptcp: handle local addrs announced by userspace PMs"). We can skip all these tests if the feature is not supported simply by looking for the MPTCP pm_type's sysctl knob. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
When a required tool is missing, the return code 4 (SKIP) should be returned instead of 1 (FAIL). Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is TCP_INQ cmsg support introduced in commit 2c9e7765 ("mptcp: add TCP_INQ cmsg support"). It is possible to look for "mptcp_ioctl" in kallsyms because it was needed to introduce the mentioned feature. We can skip these tests and not set TCPINQ option if the feature is not supported. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5cbd886c ("selftests: mptcp: add TCP_INQ support") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. It is possible to look for "mptcp_diag_fill_info" in kallsyms because it is introduced by the mentioned feature. So we can know in advance if the feature is supported and skip the sub-test if not. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. We cannot guess in advance which sizes the kernel will returned: older kernel can returned smaller sizes, e.g. recently the tcp_info structure has been modified in commit 71fc7047 ("tcp: add rcv_wnd and plb_rehash to TCP_INFO") where a new field has been added. The userspace can also expect a smaller size if it is compiled with old uAPI kernel headers. So for these sizes, we can only check if they are above a certain threshold, 0 for the moment. We can also only compared sizes with the ones set by the kernel. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the fullmesh flag that can be given to the MPTCP in-kernel path-manager and introduced in commit 2843ff6f ("mptcp: remote addresses fullmesh"). If the flag is not visible in the dump after having set it, we don't check the content. Note that if we expect to have this feature and SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always check the content to avoid regressions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6da1dfdd ("selftests: mptcp: add set_flags tests in pm_netlink.sh") Cc: stable@vger.kernel.org Signed-off-by:
-
