- 21 Jun, 2013 40 commits
-
-
Guennadi Liakhovetski authored
It is often useful to have simple means to get from a subdevice to the underlying physical device. This patch adds such a pointer to struct v4l2_subdev and sets it accordingly in the I2C and SPI cases. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
Typical video devices like camera sensors require an external clock source. Many such devices cannot even access their hardware registers without a running clock. These clock sources should be controlled by their consumers. This should be performed, using the generic clock framework. Unfortunately so far only very few systems have been ported to that framework. This patch adds a set of temporary helpers, mimicking the generic clock API, to V4L2. Platforms, adopting the clock API, should switch to using it. Eventually this temporary API should be removed. Signed-off-by:
-
Guennadi Liakhovetski authored
Some CEU implementations have non-standard (larger) maximum supported width and height values. Add two OF properties to specify them. Signed-off-by:
-
Guennadi Liakhovetski authored
Add an OF hook to sh_mobile_ceu_camera.c, no properties so far. Booting with DT also requires platform data to be optional. Signed-off-by:
-
Guennadi Liakhovetski authored
During client probing we only have to turn on the host's clock, no need to actually attach the client to the host. Signed-off-by:
-
Guennadi Liakhovetski authored
All existing soc-camera host drivers use .clock_start() and .clock_stop() callbacks to activate and deactivate their camera interfaces, whereas .add() and .remove() callbacks are usually dummy. Make the former two compulsory and the latter two optional. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding and removing a client, the sh-mobile-ceu-camera driver activates and, respectively, deactivates its camera interface and, if necessary, the CSI2 controller. Only handling of the CSI2 interface is client-specific and is only needed, when a data-exchange with the client is taking place. Move the rest to .clock_start() and .clock_stop() callbacks. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding and removing a client, the mx1-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding and removing a client, the mx2-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding and removing a client, the mx3-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding and removing a client, the atmel-isi camera host driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding and removing a client, the omap1-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding and removing a client, the pxa-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by:
-
Guennadi Liakhovetski authored
Currently soc-camera uses a single camera host callback to activate the interface master clock and to configure the interface for a specific client. However, during probing we might not have the information about a client, we just need to activate the clock. Add new camera host driver callbacks to only start and stop the clock without and client-specific configuration. Signed-off-by:
-
Guennadi Liakhovetski authored
All soc-camera host drivers include a pointer to an soc-camera device in their host private struct to check, that only one client is connected. Move this common code to soc_camera.c. Signed-off-by:
-
Alexey Khoroshilov authored
If something goes wrong starting from i2c_add_adapter(), ttusb->iso_urb[] and ttusb itself are not deallocated. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Guennadi Liakhovetski authored
soc-camera isn't sufficiently broken to include any files from the drivers/media/i2c/soc_camera directory in its core or host driver files:-) Signed-off-by:
-
Thomas Meyer authored
Use the PTR_RET() macro to simplify error processing. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions, the 'remove' function does not do anything. Delete it. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions, the 'remove' function does not do anything. Delete it. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Silences the following warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
Silences the following warning: WARNING: struct dev_pm_ops should normally be const Signed-off-by:
-
Paul Bolle authored
The last users of Kconfig symbols MX3_VIDEO and VIDEO_MX2_HOSTSUPPORT were removed in v3.2. Their Kconfig entries can be removed now. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Alexey Khoroshilov authored
probe() should not return 0 for unsupported devices, but go7007_usb_probe() does. The patch fixes it to return -ENODEV. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Lubomir Rintel authored
Reverse-engineered driver for cheapo video digitizer, made from observations of Windows XP driver. The protocol is not yet completely understood, so far we don't provide any controls, only support a single format out of three and don't support the audio device. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Lad, Prabhakar authored
This patch removes the driver_data member from ths7303_state structure. The driver_data member was intended to differentiate between ths7303 and ths7353 chip and get the g_chip_ident, But as of now g_chip_ident is obsolete, so there is no need of driver_data. Signed-off-by:
-
Ondrej Zary authored
Set freqency during initialization to fix v4l2-compliance error. This also fixes VIDIOC_G_FREQUENCY always returning zero (broken by me during LM7000 conversion). Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Fix v4l2-compliance in VIDIOC_QUERYCAP by changing "ISA" to "ISA:radio-sf16fmi". Signed-off-by:
-
Alexey Khoroshilov authored
1. usbvision->alt_max_pkt_size is not deallocated anywhere. 2. if allocation of usbvision->alt_max_pkt_size fails, there is no proper deallocation of already acquired resources. The patch adds kfree(usbvision->alt_max_pkt_size) to usbvision_release() as soon as other deallocations happen there. It calls usbvision_release() if allocation of usbvision->alt_max_pkt_size fails as soon as usbvision_release() is safe to work with incompletely initialized usbvision structure. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Lad, Prabhakar authored
add OF support for the tvp514x driver. Signed-off-by:
-
Lad, Prabhakar authored
For vpif display driver each IRQ resource contains a single IRQ so drop the second loop. Signed-off-by:
-
Lad, Prabhakar authored
use devm_request_irq() instead of request_irq(). This ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
This patch uses module_platform_driver() to simplify the code. Signed-off-by:
-
Lad, Prabhakar authored
Ideally the freeing of irq's and the global variables needs to be done in the remove() rather than module_exit(), this patch moves the freeing up of irq's and freeing the memory allocated to channel objects to remove() callback of struct platform_driver. Signed-off-by:
-
Lad, Prabhakar authored
For vpif capture driver each IRQ resource contains a single IRQ so drop the second loop. Signed-off-by:
-
Lad, Prabhakar authored
use devm_request_irq() instead of request_irq(). This ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
This patch uses module_platform_driver() to simplify the code. Signed-off-by:
-
Lad, Prabhakar authored
Ideally the freeing of irq's and the global variables needs to be done in the remove() rather than module_exit(), this patch moves the freeing up of irq's and freeing the memory allocated to channel objects to remove() callback of struct platform_driver. Signed-off-by:
-
