- 17 Jul, 2012 40 commits
-
-
Roland Dreier authored
There are no in-tree users of target_get_sess_cmd() outside of target_core_transport.c. Any new code should use the higher-level target_submit_cmd() interface. So let's un-export target_get_sess_cmd() and make it static to the one file where it's actually used. (nab: Fix up minor fuzz to for-next) Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Roland Dreier authored
The only place that sets qla_tgt_sess.tearing_down calls target_splice_sess_cmd_list() immediately afterwards, without dropping the lock it holds. That function sets se_session.sess_tearing_down, so we can get rid of the qla_target-specific flag, and in the one place that looks at the qla_tgt_sess.tearing_down flag just test se_session.sess_tearing_down instead. Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by:
-
Nicholas Bellinger authored
So after kicking around commit 547ac4c9c90 around a bit more, a tcm_qla2xxx LUN unlink OP has generated the following warning: [ 50.386625] qla2xxx [0000:07:00.0]-00af:0: Performing ISP error recovery - ha=ffff880263774000. [ 70.572988] qla2xxx [0000:07:00.0]-8038:0: Cable is unplugged... [ 126.527531] ------------[ cut here ]------------ [ 126.532677] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x41/0x8c() [ 126.540433] Hardware name: S5520HC [ 126.544248] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath scsi_dh loop i2c_i801 kvm_intel kvm crc32c_intel i2c_core microcode joydev button iomemory_vsl(O) pcspkr ext3 jbd uhci_hcd lpfc ata_piix libata ehci_hcd qla2xxx mlx4_core scsi_transport_fc scsi_tgt igb [last unloaded: scsi_wait_scan] [ 126.595567] Pid: 3283, comm: unlink Tainted: G O 3.5.0-rc2+ #33 [ 126.603128] Call Trace: [ 126.605853] [<ffffffff81026b91>] ? warn_slowpath_common+0x78/0x8c [ 126.612737] [<ffffffff8102c342>] ? local_bh_enable_ip+0x41/0x8c [ 126.619433] [<ffffffffa03582a2>] ? core_disable_device_list_for_node+0x70/0xe3 [target_core_mod] [ 126.629323] [<ffffffffa035849f>] ? core_clear_lun_from_tpg+0x88/0xeb [target_core_mod] [ 126.638244] [<ffffffffa0362ec1>] ? core_tpg_post_dellun+0x17/0x48 [target_core_mod] [ 126.646873] [<ffffffffa03575ee>] ? core_dev_del_lun+0x26/0x8c [target_core_mod] [ 126.655114] [<ffffffff810bcbd1>] ? dput+0x27/0x154 [ 126.660549] [<ffffffffa0359aa0>] ? target_fabric_port_unlink+0x3b/0x41 [target_core_mod] [ 126.669661] [<ffffffffa034a698>] ? configfs_unlink+0xfc/0x14a [configfs] [ 126.677224] [<ffffffff810b5979>] ? vfs_unlink+0x58/0xb7 [ 126.683141] [<ffffffff810b6ef3>] ? do_unlinkat+0xbb/0x142 [ 126.689253] [<ffffffff81330c75>] ? page_fault+0x25/0x30 [ 126.695170] [<ffffffff81335df9>] ? system_call_fastpath+0x16/0x1b [ 126.702053] ---[ end trace 2f8e5b0a9ec797ef ]--- [ 126.756336] qla2xxx [0000:07:00.0]-00af:0: Performing ISP error recovery - ha=ffff880263774000. [ 146.942414] qla2xxx [0000:07:00.0]-8038:0: Cable is unplugged... So this warning triggered because device_list disable logic is now holding nacl->device_list_lock w/ spin_lock_irqsave before obtaining port->sep_alua_lock with only spin_lock_bh.. The original disable logic obtains *deve ahead of dropping the entry from deve->alua_port_list and then obtains ->device_list_lock to do the remaining work. Also, I'm pretty sure this particular warning is being generated by a demo-mode session in tcm_qla2xxx, and not by explicit NodeACL MappedLUNs. The Initiator MappedLUNs are already protected by a seperate configfs symlink reference back se_lun->lun_group, and the demo-mode se_node_acl (and associated ->device_list[]) is released during se_portal_group->tpg_group shutdown. The following patch drops the extra functional change to disable logic in commit 547ac4c9c90 Cc: Andy Grover <agrover@redhat.com> Signed-off-by: -
Andy Grover authored
Code was almost entirely divided based on value of bool param "enable". Split it into two functions. Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
-
Andy Grover authored
Signed-off-by:
-
Andy Grover authored
Bubble-up retval from iscsi_update_param_value() and iscsit_ta_authentication(). Other very small retval cleanups. Signed-off-by:
-
Andy Grover authored
Only used in a debugprint, and function signature is cleaner now. Signed-off-by:
-
Andy Grover authored
Signed-off-by:
-
Christoph Hellwig authored
The last functionality of the target processing thread is offloading possibly long running task management requests from the submitter context. To keep TMR semantics the same we need a single threaded ordered queue, which can be provided by a per-device workqueue with the right flags. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
Remove this command submission path which is not used by any in-tree driver. This also removes the now unused new_cmd_map fabtric method, which a few drivers implemented despite never calling transport_generic_handle_cdb_map. Signed-off-by:
-
Christoph Hellwig authored
There is no need to schedule the delayed processing in a workqueue that offloads it to the target processing thread. Instead execute it directly from the workqueue. There will be a lot of future work in this area, which I'd likfe to defer for now as it is not nessecary for getting rid of the target processing thread. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Defer the write processing to the internal to be able to use target_execute_cmd. I'm not even entirely sure the calling code requires this due to the convoluted structure in libfc, but let's be safe for now. Signed-off-by:
-
Christoph Hellwig authored
Defer the whole tcm_qla2xxx_handle_data call instead of just the error path to the qla2xxx-internal workqueue. Also remove the useless lock around the CMD_T_ABORTED check. Signed-off-by:
-
Christoph Hellwig authored
srpt_handle_rdma_comp is called from kthread context and thus can execute target_execute_cmd directly. srpt_abort_cmd sets the CMD_T_LUN_STOP flag directly, and thus the abuse of transport_generic_handle_data can be replaced with an opencoded variant of that code path. I'm still not happy about a fabric driver poking into target core internals like this, but let's defer the bigger architecture changes for now. Signed-off-by:
-
Christoph Hellwig authored
All three callers of transport_generic_handle_data are from user context and can use target_execute_cmd directly to handle the backend I/O submission of WRITE I/O. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
When we call target_execute_cmd for write commands the command has been on the state list before an abort might have come in before target_execute_cmd. Call transport_check_aborted_status to deal with this case. Signed-off-by:
-
Christoph Hellwig authored
Just call target_execute_cmd directly. Also, convert loopback, sbp, usb-gadget to use the newly exported target_execute_cmd(). Signed-off-by:
-
Christoph Hellwig authored
Inline the transport_off == 0 case into target_execute_cmd to simplify the function for the remaining cases. Signed-off-by:
-
Sachin Kamat authored
ctype.h and string.h header files were included more than once. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Nicholas Bellinger authored
Existing lio_dump.py code expects this to be in place for /iscsi. Revert for now to avoid userspace breakage in lio-utils This reverts commit fd88a785f9ac5d6be437c528571ccd85cdf2d493. Signed-off-by: -
Christoph Hellwig authored
Having all the unmap payload parsing in the backed is a bit ugly, but until more drivers support it and we can find a good interface for all of them that seems the way to go. Signed-off-by:
-
Christoph Hellwig authored
Add spc_ops->execute_write_same() caller for ->execute_cmd() setup, and update IBLOCK backends to use it. (nab: add export of spc_get_write_same_sectors symbol) (roland: Carry forward: Fix range calculation in WRITE SAME emulation when num blocks == 0) Signed-off-by: -
Christoph Hellwig authored
Add spc_ops->execute_sync_cache() caller for ->execute_cmd() setup, and update IBLOCK + FILEIO backends to use it. Signed-off-by:
-
Christoph Hellwig authored
Remove the execute_cmd method in struct se_subsystem_api, and always use the one directly in struct se_cmd. To make life simpler for SBC virtual backends a struct spc_ops that is passed to sbc_parse_cmd is added. For now it only contains an execute_rw member, but more will follow with the subsequent commits. Signed-off-by:
-
Christoph Hellwig authored
Remove the dead SCF_SE_ALLOW_EOO and SCF_DELAYED_CMD_FROM_SAM_ATTR from se_cmd_flags_table. Signed-off-by:
-
Roland Dreier authored
It's got no callers... Signed-off-by:
-
Andy Grover authored
see https://bugzilla.redhat.com/show_bug.cgi?id=818855 Adds a parameter so read-only block devices may be registered as LIO backstores. Signed-off-by:
-
Andy Grover authored
These modules, along with other fabrics, should be loaded as-needed by the LIO userspace tools. Signed-off-by:
-
Christoph Hellwig authored
Also remove the unused ref_task_lun field in struct se_tmr_req. (nab: Add missing TASK_REASSIGN ref_lun vs. ref_cmd orig_fe_lun checks in iscsit_tmr_task_reassign) Signed-off-by: -
Christoph Hellwig authored
Since "target: Drop se_device TCQ queue_depth usage from I/O path" we always submit all commands (or back then, tasks) from __transport_execute_tasks. That means the the execute list has lots its purpose, as we can simply submit the commands that are restarted in transport_complete_task_attr directly while we walk the list. In fact doing so also solves a race in the way it currently walks to delayed_cmd_list as well. Signed-off-by:
-
Nicholas Bellinger authored
This patch changes back the pSCSI backend to follow pre 3.6-queue code to passthrough SPC-3 persistent reservations + SPC-2 legacy reservation handling to the underlying LLD / physical hardware. For folks who really need this for their own SPC-3 emulation logic, avoid changing the functionality of this beyond what is exported for REPORT_LUNS for existing code, and to avoid problems with SPC-3 PR/ALUA as INQUIRY EVPD=0x83 emulation needs to be in place in order for this to work as expected with spc_parse_cdb() code.. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: -
Nicholas Bellinger authored
The MAINTENANCE_[IN,OUT] CDB parsing required for generic ALUA emulation needs to be in spc_parse_cdb() to function for virtual TYPE_DISK exports, instead of in backend pscsi_parse_cdb() code used only for passthrough ops. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: -
Christoph Hellwig authored
The virtual drivers don't need to clear cdb fields they never look at, so move this code into the pscsi backend. Signed-off-by:
-
Christoph Hellwig authored
Move the existing code in target_core_cdb.c into the files for the command sets that the emulations implement. (roland + nab: Squash patch: Fix range calculation in WRITE SAME emulation when num blocks == 0s) Signed-off-by:
-
Christoph Hellwig authored
Instead of trying to handle all SCSI command sets in one function (transport_generic_cmd_sequencer) call out to the backend driver to perform this functionality. For pSCSI a copy of the existing code is used, but for all virtual backends we can use a new parse_sbc_cdb helper is used to provide a simple SBC emulation. For now this setups means a fair amount of duplication between pSCSI and the SBC library, but patches later in this series will sort out that problem. (nab: Fix up build failure in target_core_pscsi.c) Signed-off-by:
-
Christoph Hellwig authored
(nab: Add EXPORT_SYMBOL usage for spc_parse_cdb) Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
We don't need three flags to classifiy the CDB as we can check for a NULL S/G list for a dataless command, and can infer from the absence of the data flag that we deal with a control CDB. Also remove the _SG_IO from the data CDB flag as all I/O is dont on S/G lists now. Signed-off-by:
-
