- 15 Jul, 2015 40 commits
-
-
Rafael J. Wysocki authored
commit 0294112e upstream. This effectively reverts the following three commits: 7bc10388 ACPI / resources: free memory on error in add_region_before() 0f1b414d ACPI / PNP: Avoid conflicting resource reservations b9a5e5e1 ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e1 introduced regressions some of which, but not all, were addressed by commit 0f1b414d and commit 7bc10388 was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e1). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e1 that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e1 "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Fabian Frederick authored
commit e4f95517 upstream. Add last missing line in commit "cdd9eefd" ("fs/ufs: restore s_lock mutex") Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Sowmini Varadhan authored
commit 0edfad59 upstream. Since it is possible for vnet_event_napi to end up doing vnet_control_pkt_engine -> ... -> vnet_send_attr -> vnet_port_alloc_tx_ring -> ldc_alloc_exp_dring -> kzalloc() (i.e., in softirq context), kzalloc() should be called with GFP_ATOMIC from ldc_alloc_exp_dring. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paolo Bonzini authored
commit ce40cd3f upstream. Malicious (or egregiously buggy) userspace can trigger it, but it should never happen in normal operation. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
David E. Box authored
commit aa8e4f22 upstream. Fixes an error in having the iosf build as 'default m'. On X86 SoC's the iosf sideband is the only way to access information for some registers, as opposed to through MSR's on other Intel architectures. While selecting IOSF_MBI is preferred, it does mean carrying extra code on non-SoC architectures. This exports the selection to the user, allowing those driver writers to compile out iosf code if it's not being built. Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Link: http://lkml.kernel.org/r/1409175640-32426-2-git-send-email-david.e.box@linux.intel.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Cc: William Dauchy <william@gandi.net> Signed-off-by:
-
Chris Metcalf authored
commit 2528a8b8 upstream. bitmap_parselist("", &mask, nmaskbits) will erroneously set bit zero in the mask. The same bug is visible in cpumask_parselist() since it is layered on top of the bitmask code, e.g. if you boot with "isolcpus=", you will actually end up with cpu zero isolated. The bug was introduced in commit 4b060420 ("bitmap, irq: add smp_affinity_list interface to /proc/irq") when bitmap_parselist() was generalized to support userspace as well as kernelspace. Fixes: 4b060420 ("bitmap, irq: add smp_affinity_list interface to /proc/irq") Signed-off-by:
Chris Metcalf <cmetcalf@ezchip.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vasily Averin authored
commit d194e5d6 upstream. The final version of commit 637241a9 ("kmsg: honor dmesg_restrict sysctl on /dev/kmsg") lost few hooks, as result security_syslog() are processed incorrectly: - open of /dev/kmsg checks syslog access permissions by using check_syslog_permissions() where security_syslog() is not called if dmesg_restrict is set. - syslog syscall and /proc/kmsg calls do_syslog() where security_syslog can be executed twice (inside check_syslog_permissions() and then directly in do_syslog()) With this patch security_syslog() is called once only in all syslog-related operations regardless of dmesg_restrict value. Fixes: 637241a9 ("kmsg: honor dmesg_restrict sysctl on /dev/kmsg") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Cc: Kees Cook <keescook@chromium.org> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
-
Naoya Horiguchi authored
commit 641844f5 upstream. Currently the initial value of order in dissolve_free_huge_page is 64 or 32, which leads to the following warning in static checker: mm/hugetlb.c:1203 dissolve_free_huge_pages() warn: potential right shift more than type allows '9,18,64' This is a potential risk of infinite loop, because 1 << order (== 0) is used in for-loop like this: for (pfn =3D start_pfn; pfn < end_pfn; pfn +=3D 1 << order) ... So this patch fixes it by using global minimum_order calculated at boot time. text data bss dec hex filename 28313 469 84236 113018 1b97a mm/hugetlb.o 28256 473 84236 112965 1b945 mm/hugetlb.o (patched) Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Satish Ashok authored
commit 754bc547 upstream. When a port goes through a link down/up the multicast router configuration is not restored. Signed-off-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 0909e117 ("bridge: Add multicast_router sysfs entries") Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Uwe Kleine-König authored
commit 530c11d4 upstream. The omap watchdog has the annoying behaviour that writes to most registers don't have any effect when the watchdog is already running. Quoting the AM335x reference manual: To modify the timer counter value (the WDT_WCRR register), prescaler ratio (the WDT_WCLR[4:2] PTV bit field), delay configuration value (the WDT_WDLY[31:0] DLY_VALUE bit field), or the load value (the WDT_WLDR[31:0] TIMER_LOAD bit field), the watchdog timer must be disabled by using the start/stop sequence (the WDT_WSPR register). Currently the timer is stopped in the .probe callback but still there are possibilities that yield to a situation where omap_wdt_start is entered with the timer running (e.g. when /dev/watchdog is closed without stopping and then reopened). In such a case programming the timeout silently fails! To circumvent this stop the timer before reprogramming. Assuming one of the first things the watchdog user does is setting the timeout explicitly nothing too bad should happen because this explicit setting works fine. Fixes: 7768a13c ("[PATCH] OMAP: Add Watchdog driver support") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Oleg Nesterov authored
commit 2f993cf0 upstream. While looking for other users of get_state/cond_sync. I Found ring_buffer_attach() and it looks obviously buggy? Don't we need to ensure that we have "synchronize" _between_ list_del() and list_add() ? IOW. Suppose that ring_buffer_attach() preempts right_after get_state_synchronize_rcu() and gp completes before spin_lock(). In this case cond_synchronize_rcu() does nothing and we reuse ->rb_entry without waiting for gp in between? It also moves the ->rcu_pending check under "if (rb)", to make it more readable imo. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: josh@joshtriplett.org Cc: tj@kernel.org Fixes: b69cf536 ("perf: Fix a race between ring_buffer_detach() and ring_buffer_attach()") Link: http://lkml.kernel.org/r/20150530200425.GA15748@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ding Wang authored
commit 29535f7b upstream. The current handler of MMC_BLK_CMD_ERR in mmc_blk_issue_rw_rq function may cause new coming request permanent missing when the ongoing request (previoulsy started) complete end. The problem scenario is as follows: (1) Request A is ongoing; (2) Request B arrived, and finally mmc_blk_issue_rw_rq() is called; (3) Request A encounters the MMC_BLK_CMD_ERR error; (4) In the error handling of MMC_BLK_CMD_ERR, suppose mmc_blk_cmd_err() end request A completed and return zero. Continue the error handling, suppose mmc_blk_reset() reset device success; (5) Continue the execution, while loop completed because variable ret is zero now; (6) Finally, mmc_blk_issue_rw_rq() return without processing request B. The process related to the missing request may wait that IO request complete forever, possibly crashing the application or hanging the system. Fix this issue by starting new request when reset success. Signed-off-by:
Ding Wang <justin.wang@spreadtrum.com> Fixes: 67716327 ("mmc: block: add eMMC hardware reset support") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Thierry Reding authored
commit 3c1dae0a upstream. The DPAUX read/write FIFO registers aren't sequential in the register space, causing transfers larger than 4 bytes to cause accesses to non- existing FIFO registers. Fixes: 6b6b6042 ("drm/tegra: Add eDP support") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit b064a8fa upstream. Commit 73f7d1ca "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by:
Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Reviewed-by:
Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
-
Dan Carpenter authored
commit 474ff0ae upstream. My static checker complains that: sound/soc/fsl/imx-wm8962.c:196 imx_wm8962_probe() warn: we tested 'ret' before and it was 'false' The intent was that we use "ret" to check imx_audmux_v2_configure_port(). Fixes: 8de2ae2a ('ASoC: fsl: add imx-wm8962 machine driver') Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Ben Segall authored
commit 54d27365 upstream. The optimized task selection logic optimistically selects a new task to run without first doing a full put_prev_task(). This is so that we can avoid a put/set on the common ancestors of the old and new task. Similarly, we should only call check_cfs_rq_runtime() to throttle eligible groups if they're part of the common ancestry, otherwise it is possible to end up with no eligible task in the simple task selection. Imagine: /root /prev /next /A /B If our optimistic selection ends up throttling /next, we goto simple and our put_prev_task() ends up throttling /prev, after which we're going to bug out in set_next_entity() because there aren't any tasks left. Avoid this scenario by only throttling common ancestors. Reported-by:
Mohammed Naser <mnaser@vexxhost.com> Reported-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Ben Segall <bsegall@google.com> [ munged Changelog ] Signed-off-by:
-
Konstantin Khlebnikov authored
commit c8fff7bc upstream. Node 0 might be offline as well as any other numa node, in this case kernel cannot handle memory allocation and crashes. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Signed-off-by:
-
Omar Sandoval authored
commit 773cd04e upstream. Since commit 0723a047 ("btrfs: allow mounting btrfs subvolumes with different ro/rw options"), when mounting a subvolume read/write when another subvolume has previously been mounted read-only, we first do a remount. However, this should be done with the superblock locked, as per sync_filesystem(): /* * We need to be protected against the filesystem going from * r/o to r/w or vice versa. */ WARN_ON(!rwsem_is_locked(&sb->s_umount)); This WARN_ON can easily be hit with: mkfs.btrfs -f /dev/vdb mount /dev/vdb /mnt btrfs subvol create /mnt/vol1 btrfs subvol create /mnt/vol2 umount /mnt mount -oro,subvol=/vol1 /dev/vdb /mnt mount -orw,subvol=/vol2 /dev/vdb /mnt2 Fixes: 0723a047 ("btrfs: allow mounting btrfs subvolumes with different ro/rw options") Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Omar Sandoval <osandov@osandov.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Chuck Lever authored
commit d683cc49 upstream. When encoding the NFSACL SETACL operation, reserve just the estimated size of the ACL rather than a fixed maximum. This eliminates needless zero padding on the wire that the server ignores. Fixes: ee5dc773 ('NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"') Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
NeilBrown authored
commit 4724e271 upstream. The USB phy should initialize with power-off, and will be powered on by the USB system when a cable connection is detected. Having this pm_runtime_get_sync() during probe causes the phy to *always* be powered on. Removing it returns to sensible power management. Fixes: 96be39abSigned-off-by:
NeilBrown <neil@brown.name> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Michal Kazior authored
commit 6cbfb1bb upstream. It was possible for mac80211 to be coerced into an unexpected flow causing sdata union to become corrupted. Station pointer was put into sdata->u.vlan.sta memory location while it was really master AP's sdata->u.ap.next_beacon. This led to station entry being later freed as next_beacon before __sta_info_flush() in ieee80211_stop_ap() and a subsequent invalid pointer dereference crash. The problem was that ieee80211_ptr->use_4addr wasn't cleared on interface type changes. This could be reproduced with the following steps: # host A and host B have just booted; no # wpa_s/hostapd running; all vifs are down host A> iw wlan0 set type station host A> iw wlan0 set 4addr on host A> printf 'interface=wlan0\nssid=4addrcrash\nchannel=1\nwds_sta=1' > /tmp/hconf host A> hostapd -B /tmp/conf host B> iw wlan0 set 4addr on host B> ifconfig wlan0 up host B> iw wlan0 connect -w hostAssid host A> pkill hostapd # host A crashed: [ 127.928192] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c8 [ 127.929014] IP: [<ffffffff816f4f32>] __sta_info_flush+0xac/0x158 ... [ 127.934578] [<ffffffff8170789e>] ieee80211_stop_ap+0x139/0x26c [ 127.934578] [<ffffffff8100498f>] ? dump_trace+0x279/0x28a [ 127.934578] [<ffffffff816dc661>] __cfg80211_stop_ap+0x84/0x191 [ 127.934578] [<ffffffff816dc7ad>] cfg80211_stop_ap+0x3f/0x58 [ 127.934578] [<ffffffff816c5ad6>] nl80211_stop_ap+0x1b/0x1d [ 127.934578] [<ffffffff815e53f8>] genl_family_rcv_msg+0x259/0x2b5 Note: This isn't a revert of f8cdddb8 ("cfg80211: check iface combinations only when iface is running") as far as functionality is considered because b6a55015 ("cfg80211/mac80211: move more combination checks to mac80211") moved the logic somewhere else already. Fixes: f8cdddb8 ("cfg80211: check iface combinations only when iface is running") Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Michal Kazior authored
commit ab499db8 upstream. There was a possible race between ieee80211_reconfig() and ieee80211_delayed_tailroom_dec(). This could result in inability to transmit data if driver crashed during roaming or rekeying and subsequent skbs with insufficient tailroom appeared. This race was probably never seen in the wild because a device driver would have to crash AND recover within 0.5s which is very unlikely. I was able to prove this race exists after changing the delay to 10s locally and crashing ath10k via debugfs immediately after GTK rekeying. In case of ath10k the counter went below 0. This was harmless but other drivers which actually require tailroom (e.g. for WEP ICV or MMIC) could end up with the counter at 0 instead of >0 and introduce insufficient skb tailroom failures because mac80211 would not resize skbs appropriately anymore. Fixes: 8d1f7ecd ("mac80211: defer tailroom counter manipulation when roaming") Signed-off-by:
-
Uwe Kleine-König authored
commit e5babdf9 upstream. Since commit bd31b859 (which is in 3.2-rc1) nw_gpio_lock is a raw spinlock that needs usage of the corresponding raw functions. This fixes: drivers/mtd/maps/dc21285.c: In function 'nw_en_write': drivers/mtd/maps/dc21285.c:41:340: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type spin_lock_irqsave(&nw_gpio_lock, flags); In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:299:102: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline raw_spinlock_t *spinlock_check(spinlock_t *lock) ^ drivers/mtd/maps/dc21285.c:43:25: warning: passing argument 1 of 'spin_unlock_irqrestore' from incompatible pointer type spin_unlock_irqrestore(&nw_gpio_lock, flags); ^ In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:370:91: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline void spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags) Fixes: bd31b859 ("locking, ARM: Annotate low level hw locks as raw") Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit e3958e9d upstream. These are used like: set_bit(WORK_LINK_UP, &priv->work_pending); The problem is that set_bit() takes the actual bit number and not a mask so static checkers get upset. It doesn't affect run time because we do it consistently, but we may as well clean it up. Fixes: 6010ce07 ('rndis_wlan: do link-down state change in worker thread') Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Dan Carpenter authored
commit 191f1aee upstream. In d8a2c51c ('ath9k_htc: Use atomic operations for op_flags') we changed things like this: - if (priv->op_flags & OP_TSF_RESET) { + if (test_bit(OP_TSF_RESET, &priv->op_flags)) { The problem is that test_bit() takes a bit number and not a mask. It means that when we do: set_bit(OP_TSF_RESET, &priv->op_flags); Then it sets the (1 << 6) bit instead of the 6 bit so we are setting a bit which is past the end of the unsigned long. Fixes: d8a2c51c ('ath9k_htc: Use atomic operations for op_flags') Signed-off-by:
-
Or Gerlitz authored
commit 430910b1 upstream. When multiplexling a MAD sent from VF, we should convert the port used by the guest to send the packet to the actual physical port which will be used to transmit the packet, before building the relevant address-handle (AH). This is needed under VPI for single ported VFs, since the code that builds the AH (mlx4_ib_query_ah()) makes decisions based on the input port. If we use the port number provided by the guest, it might have different protocol vs. the one this packat has to go from, and hence the result could be wrong. So far, the conversion was done after the AH was built and it worked for single ported Eth VFs which were not enabled under VPI. When adding support for single ported IB VFs and VPI, we hit that. Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
commit 7c35ef45 upstream. Single port VFs always provide port = 1 (even if the actual physical port used is port 2). As such, we need to convert the port provided by the VF to the physical port before calling into the firmware. It turns out that the Linux mlx4 VF RoCE driver maintains a copy of the GID table and hence this change became critical only for single ported IB VFs, but it could be needed for other RoCE VF drivers too. Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Arnd Bergmann authored
commit abab381f upstream. The platform_sysrq_reset_seq code was intended as a way for an embedded platform to provide its own sysrq sequence at compile time. After over two years, nobody has started using it in an upstream kernel, and the platforms that were interested in it have moved on to devicetree, which can be used to configure the sequence without requiring kernel changes. The method is also incompatible with the way that most architectures build support for multiple platforms into a single kernel. Now the code is producing warnings when built with gcc-5.1: drivers/tty/sysrq.c: In function 'sysrq_init': drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds] key = platform_sysrq_reset_seq[i]; We could fix this, but it seems unlikely that it will ever be used, so let's just remove the code instead. We still have the option to pass the sequence either in DT, using the kernel command line, or using the /sys/module/sysrq/parameters/reset_seq file. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 154b7a48 ("Input: sysrq - allow specifying alternate reset sequence") ---- v2: moved sysrq_reset_downtime_ms variable to avoid introducing a compile warning when CONFIG_INPUT is disabled Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Carpenter authored
commit 83ed07c5 upstream. Static checkers complain that the current condition is never true. It seems pretty likely that it's a typo and "URB" was intended instead of "USB". Fixes: 3d97ff63 ('usbdevfs: Use scatter-gather lists for large bulk transfers') Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Jesper Dangaard Brouer authored
commit d079abd1 upstream. Too many spaces were introduced in commit 63adc6fb ("pktgen: cleanup checkpatch warnings"), thus misaligning "src_min:" to other columns. Fixes: 63adc6fb ("pktgen: cleanup checkpatch warnings") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit c8fd51dc upstream. These defines are used like this: if (test_bit(I2C_HID_STARTED, &ihid->flags)) The intent was to use bits 0, 1, and 2 but because of the extra shifts we're using bits 1, 2, and 4. It's harmless becuase it's done consistently but it's not the intent and static checkers will complain. Fixes: 4a200c3b ('HID: i2c-hid: introduce HID over i2c specification implementation') Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Dan Carpenter authored
commit af43c408 upstream. These defines are used like this: if (!(test_bit(RMI_STARTED, &hdata->flags))) So the intent was to use bits 0, 1 and 2 but because of the extra BIT() shifts we're actually using 1, 2 and 4. It's harmless because it's done consistently but static checkers will complain. Fixes: 9fb6bf02 ('HID: rmi: introduce RMI driver for Synaptics touchpads') Signed-off-by:
-
Eric Dumazet authored
commit 252a8fbe upstream. make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/ipip.o CHECK net/ipv4/ipip.c net/ipv4/ipip.c:254:27: warning: incorrect type in assignment (different base types) net/ipv4/ipip.c:254:27: expected restricted __be32 [addressable] [usertype] o_key net/ipv4/ipip.c:254:27: got restricted __be16 [addressable] [usertype] i_flags Fixes: 3b7b514f ("ipip: fix a regression in ioctl") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit e0cdcda5 upstream. of_clk_get_from_provider() returns ERR_PTR on failure. The dra7-atl-clock driver was not checking its return value and immediately used it in __clk_get_hw(). __clk_get_hw() dereferences supplied clock, if it is not NULL, so in that case it would dereference an ERR_PTR. Fixes: 9ac33b0c ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Nathan Fontenot authored
commit 2222ce0f upstream. Failure return from dlpar_configure_connector when dlpar adding cpus results in leaking references to the cpus parent device node. Move the call to of_node_put() prior to checking the result of dlpar_configure_connector. Fixes: 8d5ff320 ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Alexander Duyck authored
commit 8084b86d upstream. When the VLAN_HLEN was added to the calculation for the maximum frame size there seems to have been a number of issues added to the driver. The first issue is that in some cases the maximum frame size for a device never really reached the actual maximum frame size as the VLAN header length was not included the calculation for that value. As a result some parts only supported a maximum frame size of either 1496 in the case of parts that didn't support jumbo frames, and 8996 in the case of the parts that do. The second issue is the fact that there were several checks that weren't updated so as a result setting an MTU of 1500 was treated as enabling jumbo frames as the calculated value was 1522 instead of 1518. I have addressed those by replacing ETH_FRAME_LEN with VLAN_ETH_FRAME_LEN where appropriate. The final issue was the fact that lowering the MTU below 1500 would cause the driver to allocate 2K buffers for the rings. This is an old issue that was fixed several years ago in igb/ixgbe and I am addressing now by just replacing == with a <= so that we always just round up to 1522 for anything that isn't a jumbo frame. Fixes: c751a3d5 ("e1000e: Correctly include VLAN_HLEN when changing interface MTU") Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ luis: backported to 3.16: - dropped changes to struct e1000_pch_spt_info as i219 isn't supported ] Signed-off-by:
-
Stefan Wahren authored
commit 7cb81136 upstream. key/value pairs in a JSON object must be separated by a comma. After adding the properties "accuracy" and "phase" the JSON output of /sys/kernel/debug/clk/clk_dump is invalid. So add the missing commas to fix it. Fixes: 5279fc40 ("clk: add clk accuracy retrieval support") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> [sboyd@codeaurora.org: Added comment in function] Signed-off-by:
-
Al Viro authored
commit a84b69cb upstream. If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Signed-off-by:
-
Cornelia Huck authored
commit 431dae77 upstream. Eric noticed problems with vhost-scsi and virtio-ccw: vhost-scsi complained about overwriting values in the config space, which was triggered by a broken implementation of virtio-ccw's config get/set routines. It was probably sheer luck that we did not hit this before. When writing a value to the config space, the WRITE_CONF ccw will always write from the beginning of the config space up to and including the value to be set. If the config space up to the value has not yet been retrieved from the device, however, we'll end up overwriting values. Keep track of the known config space and update if needed to avoid this. Moreover, READ_CONF will only read the number of bytes it has been instructed to retrieve, so we must not copy more than that to the buffer, or we might overwrite trailing values. Reported-by:
Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Radim Krčmář authored
commit db138562 upstream. Legacy NMI watchdog didn't work after migration/resume, because vapics_in_nmi_mode was left at 0. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
