- 21 Aug, 2014 40 commits
-
-
Shuah Khan authored
au0828 doesn't resume correctly and TV tuning fails with xc_set_signal_source(0) failed message. Change au0828 dvb suspend and resume interfaces to suspend and resume frontend during suspend and resume respectively. dvb_frontend_suspend() suspends tuner and fe using tuner and fe ops. dvb_frontend_resume() resumes fe and tuner using fe and tuner ops ini before waking up the frontend. With this change HVR950Q suspend and resume work when system gets suspended when digital function is tuned to a channel and with active TV stream, and after resume it went right back to active TV stream. Signed-off-by:
Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
The correct field order in progressive mode is V4L2_FIELD_NONE, not V4L2_FIELD_INTERLACED. Cc: <stable@vger.kernel.org> Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
When a new video frame is started, the driver takes the next video buffer from the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf for further processing. On streaming stop we currently only give back the pending buffers from the list but not the ones which are currently processed. This causes the following warning from the vb2 core since kernel 3.15: ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]() [...] Call Trace: [<c0769c46>] dump_stack+0x48/0x69 [<c0245b69>] warn_slowpath_common+0x79/0x90 [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<c0245bfd>] warn_slowpath_null+0x1d/0x20 [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core] [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core] [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core] [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev] [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<c039d0e7>] ? fsnotify+0x1e7/0x2b0 [<f8e49012>] video_ioctl2+0x12/0x20 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev] [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev] [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0 [<c0368eec>] ? vfs_write+0x13c/0x1c0 [<c0369a8f>] ? vfs_writev+0x2f/0x50 [<c0379028>] SyS_ioctl+0x58/0x80 [<c076fff3>] sysenter_do_call+0x12/0x12 ---[ end trace 5545f934409f13f4 ]--- ... Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled this long standing issue and who has investigated it further. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Axel Lin authored
So we can remove the same defines in the driver code. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Axel Lin authored
So we can remove the same defines in the driver code. Signed-off-by:
-
Axel Lin authored
Fix a copy-paste bug when converting to the control framework. Fixes: commit 5d478e0d ("[media] tda7432: convert to the control framework") Signed-off-by:
-
Axel Lin authored
So we can remove the same defines in the driver code. Signed-off-by:
-
Axel Lin authored
So we can remove the same defines in the driver code. Signed-off-by:
-
Axel Lin authored
So we can remove the same defines in the driver code. Signed-off-by:
-
Axel Lin authored
So we can remove the same defines in the driver code. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Sakari Ailus authored
Constify event type constants and correct motion detection event number (it's 6, not 5). Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Ulrich Eckhardt authored
Make the front panel buttons working after another button on the remote was pressed. Signed-off-by:
Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by:
-
Ulrich Eckhardt authored
Add the key table for the Thermaltake DH-102 to the USB-Id 15c2:0034. Signed-off-by:
-
Ulrich Eckhardt authored
This patch defines the keytables per USB Device ID. Signed-off-by:
-
Vitaly Osipov authored
It makes more sense to return PTR_ERR(iss->iss_ctrlclk) here. The current code looks like an oversight in pasting the block just above this one. Signed-off-by:
Vitaly Osipov <vitaly.osipov@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Federico Simoncelli authored
Add an ALSA handler inside usbtv module, in order to make audio to work with those devices. Signed-off-by:
Federico Simoncelli <fsimonce@redhat.com> Tested-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Andreas Ruprecht authored
In the list of subdirectories compiled, b2c2/ appears twice. This patch removes one of the appearances. Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> Signed-off-by:
-
Axel Lin authored
Using the managed function the kfree() calls can be removed from the probe error path and the remove handler. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Hans Verkuil authored
Modern kernels enable dynamic printk support, which is fine, except when it is combined with a debug module option. Enabling debug in videobuf2-core now produces no debugging unless it is also enabled through the dynamic printk support in debugfs. Either use a debug module option + pr_info, or use pr_debug without a debug module option. In this case the fact that you can set various debug levels is very useful, so I believe that for videobuf2-core.c we should use pr_info. The mix of the two is very confusing: I've spent too much time already trying to figure out why I am not seeing any debug output in the kernel log when I do: echo 1 >/sys/modules/videobuf2_core/parameters/debug Signed-off-by:
-
Hans Verkuil authored
The order of the last two fields in the G/S_EDID specification was swapped from what is in the actual struct. Fix this. Signed-off-by:
-
Hans Verkuil authored
The following lockdep warning has been there ever since commit a517cca6 one year ago: [ 403.117947] ====================================================== [ 403.117949] [ INFO: possible circular locking dependency detected ] [ 403.117953] 3.16.0-rc6-test-media #961 Not tainted [ 403.117954] ------------------------------------------------------- [ 403.117956] v4l2-ctl/15377 is trying to acquire lock: [ 403.117959] (&dev->mutex#3){+.+.+.}, at: [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.117974] [ 403.117974] but task is already holding lock: [ 403.117976] (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0 [ 403.117987] [ 403.117987] which lock already depends on the new lock. [ 403.117987] [ 403.117990] [ 403.117990] the existing dependency chain (in reverse order) is: [ 403.117992] [ 403.117992] -> #1 (&mm->mmap_sem){++++++}: [ 403.117997] [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0 [ 403.118006] [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30 [ 403.118010] [<ffffffff810d9da7>] lock_acquire+0xa7/0x160 [ 403.118014] [<ffffffff8118c9ec>] might_fault+0x7c/0xb0 [ 403.118018] [<ffffffffa0028a25>] video_usercopy+0x425/0x610 [videodev] [ 403.118028] [<ffffffffa0028c25>] video_ioctl2+0x15/0x20 [videodev] [ 403.118034] [<ffffffffa0022764>] v4l2_ioctl+0x184/0x1a0 [videodev] [ 403.118040] [<ffffffff811d77d0>] do_vfs_ioctl+0x2f0/0x4f0 [ 403.118307] [<ffffffff811d7a51>] SyS_ioctl+0x81/0xa0 [ 403.118311] [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b [ 403.118319] [ 403.118319] -> #0 (&dev->mutex#3){+.+.+.}: [ 403.118324] [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0 [ 403.118329] [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0 [ 403.118333] [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30 [ 403.118336] [<ffffffff810d9da7>] lock_acquire+0xa7/0x160 [ 403.118340] [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640 [ 403.118344] [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118349] [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev] [ 403.118354] [<ffffffff81197270>] mmap_region+0x3d0/0x5d0 [ 403.118359] [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400 [ 403.118363] [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0 [ 403.118366] [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0 [ 403.118369] [<ffffffff810085c2>] SyS_mmap+0x22/0x30 [ 403.118376] [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b [ 403.118381] [ 403.118381] other info that might help us debug this: [ 403.118381] [ 403.118383] Possible unsafe locking scenario: [ 403.118383] [ 403.118385] CPU0 CPU1 [ 403.118387] ---- ---- [ 403.118388] lock(&mm->mmap_sem); [ 403.118391] lock(&dev->mutex#3); [ 403.118394] lock(&mm->mmap_sem); [ 403.118397] lock(&dev->mutex#3); [ 403.118400] [ 403.118400] *** DEADLOCK *** [ 403.118400] [ 403.118403] 1 lock held by v4l2-ctl/15377: [ 403.118405] #0: (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0 [ 403.118411] [ 403.118411] stack backtrace: [ 403.118415] CPU: 0 PID: 15377 Comm: v4l2-ctl Not tainted 3.16.0-rc6-test-media #961 [ 403.118418] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 403.118420] ffffffff82a6c9d0 ffff8800af37fb00 ffffffff819916a2 ffffffff82a6c9d0 [ 403.118425] ffff8800af37fb40 ffffffff810d5715 ffff8802308e4200 0000000000000000 [ 403.118429] ffff8802308e4a48 ffff8802308e4a48 ffff8802308e4200 0000000000000001 [ 403.118433] Call Trace: [ 403.118441] [<ffffffff819916a2>] dump_stack+0x4e/0x7a [ 403.118445] [<ffffffff810d5715>] print_circular_bug+0x1d5/0x2a0 [ 403.118449] [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0 [ 403.118455] [<ffffffff8119c172>] ? find_vmap_area+0x42/0x70 [ 403.118459] [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0 [ 403.118463] [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30 [ 403.118468] [<ffffffff810d9da7>] lock_acquire+0xa7/0x160 [ 403.118472] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118476] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118480] [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640 [ 403.118484] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118488] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118493] [<ffffffff810d8055>] ? mark_held_locks+0x75/0xa0 [ 403.118497] [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118502] [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev] [ 403.118506] [<ffffffff81197270>] mmap_region+0x3d0/0x5d0 [ 403.118510] [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400 [ 403.118513] [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0 [ 403.118517] [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0 [ 403.118521] [<ffffffff810085c2>] SyS_mmap+0x22/0x30 [ 403.118525] [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b The reason is that vb2_fop_mmap and vb2_fop_get_unmapped_area take the core lock while they are called with the mmap_sem semaphore held. But elsewhere in the code the core lock is taken first but calls to copy_to/from_user() can take the mmap_sem semaphore as well, potentially causing a classical A-B/B-A deadlock. However, the mmap/get_unmapped_area calls really shouldn't take the core lock at all. So what would happen if they don't take the core lock anymore? There are two situations that need to be taken into account: calling mmap while new buffers are being added and calling mmap while buffers are being deleted. The first case works almost fine without a lock: in all cases mmap relies on correctly filled-in q->num_buffers/q->num_planes values and those are only updated by reqbufs and create_buffers *after* any new buffers have been initialized completely. Except in one case: if an error occurred while allocating the buffers it will increase num_buffers and rely on __vb2_queue_free to decrease it again. So there is a short period where the buffer information may be wrong. The second case definitely does pose a problem: buffers may be in the process of being deleted, without the internal structure being updated. In order to fix this a new mutex is added to vb2_queue that is taken when buffers are allocated or deleted, and in vb2_mmap. That way vb2_mmap won't get stale buffer data. Note that this is a problem only for MEMORY_MMAP, so even though __qbuf_userptr and __qbuf_dmabuf also mess around with buffers (mem_priv in particular), this doesn't clash with vb2_mmap or vb2_get_unmapped_area since those are MMAP specific. As an additional bonus the hack in __buf_prepare, the USERPTR case, can be removed as well since mmap() no longer takes the core lock. All in all a much cleaner solution. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Dan Carpenter authored
The "i--" needs to happen at the start of the loop or it will try to release something bogus (probably it will crash) and it won't release the first ->vaddr_page[]. Fixes: 7b4eeed1 ('[media] vmalloc_sg: make sure all pages in vmalloc area are really DMA-ready') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This is needed to free state and for dvb_detach() to be called. Signed-off-by: -
Mauro Carvalho Chehab authored
In order to get FE_HAS_SYNC, the viterbi should already be locked too. So, add the missing FE_HAS_VITERBI lock. Signed-off-by: -
Mauro Carvalho Chehab authored
Move as102-fe to dvb-frontends directory and make it an independent driver. Signed-off-by: -
Mauro Carvalho Chehab authored
Remove the dependencies of as102_cmd from as102, in order to allow it to be compiled as a separate module. Signed-off-by: -
Mauro Carvalho Chehab authored
This function just converts from the as10x internal data into the DVBv5 cache. Get rid of it. No functional changes. Signed-off-by: -
Mauro Carvalho Chehab authored
This function just parses the frontend cache and converts to the as102 internal format message. Get rid of it. No functional changes. Signed-off-by: -
Mauro Carvalho Chehab authored
Avoid having function prototypes by moving some ancillary routines to the beginning of the file. No functional changes. Signed-off-by: -
Mauro Carvalho Chehab authored
Make the frontend .name more coherent with DVB namespace. Signed-off-by: -
Mauro Carvalho Chehab authored
Fix this warning: WARNING: quoted string split across lines 566: FILE: drivers/media/usb/as102/as102_fe.c:141: + "demod status: fc: 0x%08x, bad fc: 0x%08x, " + "bytes corrected: 0x%08x , MER: 0x%04x\n", Signed-off-by: -
Mauro Carvalho Chehab authored
Make checkpatch happier by removing FSF mail address. No functional changes. Signed-off-by: -
Mauro Carvalho Chehab authored
This driver is stable and doesn't contain any really serious issue. Move it out of staging. Signed-off-by: -
Martin Kepplinger authored
remove dprintk() and replace it with dev_dbg() or pr_debug() in order to use the common kernel coding style. Signed-off-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Add support for PCTV microStick (77e) device that uses a sms1140 chipset. Cc: stable@vger.kernel.org Signed-off-by: -
Sakari Ailus authored
Don't manipulate struct v4l2_ctrl directly. Instead, use v4l2_ctrl_s_ctrl_int64() to change the values. Signed-off-by:
-
Sakari Ailus authored
Instead of modifying the control ranges directly by manipulating struct v4l2_ctrl, use __v4l2_ctrl_modify_range() for the purpose. Signed-off-by:
-
Philipp Zabel authored
This patch breaks most long lines, concatenates broken up text strings, and adds or removes parentheses where needed to make checkpatch happy. The long codec list lines and a few 81-wide lines remain. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
