- 13 Jun, 2017 3 commits
-
-
Sean Young authored
This module was merged after commit 5a8fc6a3 ("Annotate hardware config module parameters in drivers/media/"), so add add the missing hardware annotations. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Benjamin Gaignard authored
This patch add cec driver for STM32 platforms. cec hardware block isn't not always used with hdmi so cec notifier is not implemented. That will be done later when STM32 DSI driver will be available. Driver compliance has been tested with cec-ctl and cec-compliance tools. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> [hans.verkuil@cisco.com: modified platform/Makefile to use obj-y] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Benjamin Gaignard authored
Add bindings documentation for stm32 CEC driver. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 08 Jun, 2017 11 commits
-
-
Kieran Bingham authored
Return NULL, if a null entity is parsed for it's v4l2_subdev Currently, the callers of media_entity_to_v4l2_subdev() need to make sure that the subdev is non-NULL, for example, when it is obtained from media_entity_remote_pad(). As this is a recurring pattern, add the check at the macro in order to avoid additional checks at the callers. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Alexandre Courbot authored
Fix what seems to be a few typos induced by copy/paste. [mchehab@s-opensource.com: fix a typo] Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Sakari Ailus authored
The buffer cache should be synchronised in buffer preparation, not when the buffer is queued to the device. Fix this. Mmap buffers do not need cache synchronisation since they are always coherent. Signed-off-by:
-
Sakari Ailus authored
Rename __qbuf_*() functions which are specific to a buffer type as __prepare_*() which matches with what they do. The naming was there for historical reasons; the purpose of the functions was changed without renaming them. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There's a Macro that checks if gcc supports a warning before disabling it. Use it, in order to avoid warnings when building with older gcc versions. Signed-off-by: -
Mauro Carvalho Chehab authored
The atomisp css2400/Makefile includes a Makefile.common: include $(srctree)/$(src)/../Makefile.common Well, this file doesn't exist at the Kernel tree :-) So, don't include it. Signed-off-by: -
Wolfram Sang authored
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Wolfram Sang authored
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text. Signed-off-by:
-
Sakari Ailus authored
The async sub-device was not unregistered in ad5820_remove() as it should have been; do it now. Also remove the now-redundant v4l2_device_unregister_subdev(). Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Mauro Carvalho Chehab authored
Depending on arch configs to include dirs is evil, and makes harder to change drivers to work with COMPILE_TEST. Replace them by obj-y. Signed-off-by: -
Sakari Ailus authored
The DaVinci VPIF capture driver V4L2 OF support was added after the V4L2 OF framework got removed. Switch VPIF capture driver to V4L2 fwnode. Signed-off-by:
-
- 07 Jun, 2017 26 commits
-
-
Colin Ian King authored
The 2nd check of cnt > 8 is redundant as cnt is already checked and thresholded to a maximum of 8 a few statements earlier. Remove this redundant 2nd check. Detected by CoverityScan, CID#114281 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Jasmin Jessich authored
Some EXPORT_SYMBOL() on this file don't match the name of functions that preceeds them. Also, some kernel-doc markups also have a wrong name. Fix it. Signed-off-by:
Jasmin Jessich <jasmin@anw.at> Signed-off-by:
-
Jasmin Jessich authored
Make checkpatch happier by fixing this warning: ERROR: "foo * bar" should be "foo *bar" Signed-off-by:
-
Hans de Goede authored
hmm_init calls hmm_alloc to set dummy_ptr, hmm_alloc calls hmm_init when dummy_ptr is not yet set, which is the case in the call from hmm_init, so it calls hmm_init again, this continues until we have a stack overflow due to the recursion. This commit fixes this by adding a separate flag for tracking if hmm_init has been called. Not pretty, but it gets the job done, eventually we should be able to remove the hmm_init call from hmm_alloc. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Chen Guanqiao authored
Fix "symbol 'xxxxxxx' was not declared. Should it be static?" sparse warnings. Signed-off-by:
Chen Guanqiao <chen.chenchacha@foxmail.com> Reviewed-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
There is no reason for all this printk spamming and certainly not at an error log level. Signed-off-by:
-
Hans de Goede authored
As the existing comment in the driver indicates the sensor has only 1 pin, but some boards may have 2 gpios defined and we toggle both as we we don't know which one is the right one. However if the ACPI resources table defines only 1 gpio (as expected) the gpio1_ctrl call will always fail, causing the probing of the driver to file. This commit ignore the return value of the gpio1_ctrl call, fixing this. Signed-off-by:
-
Hans de Goede authored
Add OVTI2680 ACPI id to ov2680 driver Signed-off-by:
-
Hans de Goede authored
Add INT0310 ACPI id to gc0310 driver Signed-off-by:
-
Hans de Goede authored
menu controls are not allowed to have a step size, set step to 0 to fix an oops from the WARN_ON in v4l2_ctrl_new_custom() triggering because of this. Signed-off-by:
-
Hans de Goede authored
Do not call dev_warn with a NULL device, this silence the following 2 warnings: [ 14.392194] (NULL device *): Failed to find gmin variable gmin_V2P8GPIO [ 14.392257] (NULL device *): Failed to find gmin variable gmin_V1P8GPIO We could switch to using pr_warn for dev == NULL instead, but as comments in the source indicate, the check for these 2 special gmin variables with a NULL device is a workaround for 2 specific evaluation boards, so completely silencing the missing warning for these actually is a good thing. Signed-off-by:
-
Hans de Goede authored
efivar_entry_get has certain alignment requirements and the atomisp platform code was not honoring these, causing an oops by triggering the WARN_ON in arch/x86/platform/efi/efi_64.c: virt_to_phys_or_null_size(). This commit fixes this by using the members of the efivar struct embedded in the efivar_entry struct we kzalloc as arguments to efivar_entry_get(), which is how all the other callers of efivar_entry_get() do this. Signed-off-by:
-
Alan Cox authored
Between the ISP2400 and ISP2401 code base this function moved file. The merge of the drivers left us with two version in ifdefs. Resolve this down to a single copy. Signed-off-by:
-
Alan Cox authored
We won't be adding abstractions or moving them here so kill it. Signed-off-by:
-
Alan Cox authored
ISP2401 introduced a helper for this which we can use just as well on the ISP2400 and remove some more noise differences. Signed-off-by:
-
Alan Cox authored
ISP2401 introduced a rather sensible change to cut through the structure spaghetti. Adopt that for the ISP2400 as well. It makes no difference to the actual code other than readability. Signed-off-by:
-
Alan Cox authored
The ISP2401 version of this function returns a pointer to the buffer, whilst the ISP2400 version returns a boolean if a slot is found. We can trivially unify the code to use the ISP2401 version. Signed-off-by:
-
Alan Cox authored
This define is never set and these code paths are never used so they can go away. Signed-off-by:
-
Dan Carpenter authored
The isp->inputs[] array has isp->input_cnt elements which have been initialized so this > should be >=. This bug is harmless. The check against ATOM_ISP_MAX_INPUTS prevents us from reading beyond the end of the array. The uninitialized elements are zeroed out so we will end up returning -EINVAL a few lines later because the .camera pointer is NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alan Cox authored
The two drivers were machine merged and in this case the machine output was to say the least not optimal. Signed-off-by:
-
Alan Cox authored
HRT_UNSCHED is never defined or set in the driver, so this is dead code that can be retired, simplifying the code a bit further. Signed-off-by:
-
Alan Cox authored
With the removal of the HAS_BL bootloader code the value of NUM_OF_BLS is an invariant zero. So let's get rid of it. Signed-off-by:
-
Alan Cox authored
Kill off the HAS_BL define and the code and includes it brackets. We never define HAS_BL or use that functionality. Signed-off-by:
-
Juan Antonio Pedreira Martos authored
Fix a couple of sparse warnings: drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:59:14: warning: symbol 'repool_pgnr' was not declared. Should it be static? drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:387:6: warning: symbol 'punit_ddr_dvfs_enable' was not declared. Should it be static? Mark these symbols as static, so they are no longer incorrectly exported. Signed-off-by:
Juan Antonio Pedreira Martos <juanpm1@gmail.com> Signed-off-by:
-
Paolo Cretaro authored
Fix warning issued by sparse: Using plain integer as NULL pointer Signed-off-by:
Paolo Cretaro <melko@frugalware.org> Signed-off-by:
-
Christoph Fanelsa authored
Fix checkpatch warnings of prefered using '%s..", __func__' as function name in a string Signed-off-by:
Christoph Fanelsa <eddi1983@gmx.net> Signed-off-by:
-
