- 24 Oct, 2018 4 commits
-
-
Linus Walleij authored
This adds the device tree bindings for the Samsung S6D16D0 panel. This is a command mode only panel using DSI. Cc: devicetree@vger.kernel.org Cc: Andrzej Hajda <a.hajda@samsung.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-1-linus.walleij@linaro.org
-
Linus Walleij authored
The DSI devices have a maximum operating frequency specified in their data sheet per the MIPI specification, and DSI hosts that can scale their frequency need this information to set their clock dividers right. As current panel drivers often lack this information, specify that setting it to zero will make the DSI host use some reasonable default. Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Daniel Vetter authored
We recently bikeshedded this to a different flavour, but forgot to update the recommendations. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181019084311.23836-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Shuts up warning noise. Reviewed-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by:
-
- 23 Oct, 2018 7 commits
-
-
Mamta Shukla authored
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR because its better to have inlined function rather than code-opened implementation. Signed-off-by:
Mamta Shukla <mamtashukla555@gmail.com> Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181018204815.GA23390@armorer
-
Souptick Joarder authored
Replace dma_alloc_coherent + memset with dma_zalloc_coherent. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Eugeniy Paltsev authored
UDL doesn't support vblank functionality so we don't need to initialize vblank here (we are able to send page flip completion events even without vblank initialization) Moreover current drm_vblank_init call with num_crtcs > 0 causes sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every time. This breaks userspace apps (for example weston) which relies on timestamp value. Cc: stable@vger.kernel.org Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Souptick Joarder authored
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). remove suspend_state field from the rcar_du_device structure as it is no more required. With this conversion, also drm_fbdev_cma_set_suspend_unlocked() will left with no consumer. So this function can be removed. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Chunming Zhou authored
v2: add a mutex between sync_cb execution and free. v3: clearly separating the roles for pt_lock and cb_mutex (Chris) v4: the cb_mutex should be taken outside of the pt_lock around this if() block. (Chris) v5: fix a corner case v6: tidy drm_syncobj_fence_get_or_add_callback up. (Chris) Tested by syncobj_basic and syncobj_wait of igt. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.kernel.org/patch/10652893/
-
Aaron Ma authored
If failed to find the deivice owning the boot framebuffer, try to use the first VGA device instead of the last one. Usually the 1st device is integrated GPU who owns the boot framebuffer. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Aaron Ma authored
EFI GOP uses 64-bit frame buffer address when some BIOS disabled CSM support. vgaarb only stores lfb_base, this will lead boot framebuffer to wrong device. Add ext_lfb_base support to use 64-bit fb address. Signed-off-by:
-
- 22 Oct, 2018 2 commits
-
-
Alexandru Gheorghe authored
The idea is to split test implementations in different compilation units, but have one single place where we define the list of tests, in this case(drm_modeset_selftests.h). Signed-off-by:
-
Alexandru Gheorghe authored
In-line member documentation seems to be desired way of documenting structure members. This change had been suggested by Daniel Vetter here: https://lists.freedesktop.org/archives/dri-devel/2018-October/192176.htmlSigned-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181019105752.17741-2-alexandru-cosmin.gheorghe@arm.com
-
- 20 Oct, 2018 1 commit
-
-
Manasi Navare authored
VESA eDP 1.4 specification has separate fields defined in EDP_DPCD_REV for eDP 1.4a and 1.4b eDP revisions. This patch defines those. Found this when one of my eDP panels advertises eDP 1.4a (04h) in the EDP_DPCD_REV DPCD field. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009002351.23085-1-manasi.d.navare@intel.com
-
- 18 Oct, 2018 3 commits
-
-
Christoph Hellwig authored
The DMA API does its own zone decisions based on the coherent_dma_mask. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Benjamin Gaignard authored
Wait until the next vblank to be sure that crtc has been disabled. Signed-off-by:
-
Chunming Zhou authored
This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side: This extension introduces a new type of syncobj that has an integer payload identifying a point in a timeline. Such timeline syncobjs support the following operations: * CPU query - A host operation that allows querying the payload of the timeline syncobj. * CPU wait - A host operation that allows a blocking wait for a timeline syncobj to reach a specified value. * Device wait - A device operation that allows waiting for a timeline syncobj to reach a specified value. * Device signal - A device operation that allows advancing the timeline syncobj to a specified value. v1: Since it's a timeline, that means the front time point(PT) always is signaled before the late PT. a. signal PT design: Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled, the timeline will increase to value of PT[N]. b. wait PT design: Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline, so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to perform that. v2: 1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian) 2. move unexposed denitions to .c file. (Daniel Vetter) 3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian) 4. split up the change to drm_syncobj_replace_fence() in a separate patch. 5. drop the submission_fence implementation and instead use wait_event() for that. (Christian) 6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter) v3: 1. replace normal syncobj with timeline implemenation. (Vetter and Christian) a. normal syncobj signal op will create a signal PT to tail of signal pt list. b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT. 2. many bug fix and clean up 3. stub fence moving is moved to other patch. v4： 1. fix RB tree loop with while(node=rb_first(...)). (Christian) 2. fix syncobj lifecycle. (Christian) 3. only enable_signaling when there is wait_pt. (Christian) 4. fix timeline path issues. 5. write a timeline test in libdrm v5: (Christian) 1. semaphore is called syncobj in kernel side. 2. don't need 'timeline' characters in some function name. 3. keep syncobj cb. v6: (Christian) 1. merge syncobj_timeline to syncobj structure. 2. simplify some check sentences. 3. some misc change. 4. fix CTS failed issue. v7: (Christian) 1. error handling when creating signal pt. 2. remove timeline naming in func. 3. export flags in find_fence. 4. allow reset timeline. v8: 1. use wait_event_interruptible without timeout 2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY v9: 1. rename signal_pt->base to signal_pt->fence_array to avoid misleading 2. improve kerneldoc individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore* timeline syncobj is tested by ./amdgpu_test -s 9 Signed-off-by:
-
- 17 Oct, 2018 3 commits
-
-
Deepak Rawat authored
With this patch split the kernel module specific code from actual selftest code. This is done to allow adding more selftests as separate file. Also added kernel module exit stub with this patch. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: alexandru-cosmin.gheorghe@arm.com Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Gustavo A. R. Silva authored
idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_bufs.c:1420 drm_legacy_freebufs() warn: potential spectre issue 'dma->buflist' [r] (local cap) Fix this by sanitizing idx before using it to index dma->buflist Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Chunming Zhou authored
flags is new param for drm_syncob_find_fence, so need update doc, reproduce: make htmldocs reported: htmldocs: drivers/gpu/drm/drm_syncobj.c:230: warning: Function parameter or member 'flags' not described in 'drm_syncobj_find_fence' v2: rebased Signed-off-by:
-
- 16 Oct, 2018 3 commits
-
-
Enric Balletbo i Serra authored
'encoder' is dereferenced before it is null sanity checked, hence we potentially have a null pointer dereference bug. Instead, initialise drm_drv from encoder->dev->dev_private after we are sure 'encoder' is not null. Fixes: 5182c1a5 ("drm/rockchip: add an common abstracted PSR driver") Cc: stable@vger.kernel.org Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181013105654.11827-1-enric.balletbo@collabora.com
-
Chunming Zhou authored
flags can be used by driver to decide whether need to block wait submission. Signed-off-by:
-
Mamta Shukla authored
Shift * to be adjacent to pointer name to follow Linux coding style. Issue found with checkpatch.pl ERROR: "foo * bar" should be "foo *bar" Signed-off-by:
-
- 15 Oct, 2018 4 commits
-
-
Eric Anholt authored
Fixes an oops reading this debugfs entry on BCM7278. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-4-eric@anholt.net Fixes: 57692c94 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Cc: <stable@vger.kernel.org> Reviewed-by:
Boris Brezillon <boris.brezillon@bootlin.com>
-
Eric Anholt authored
Since this is UAPI, it's good to document what exactly the guarantees we're providing are. Signed-off-by:
-
Eric Anholt authored
This adds just enough performance counter support to measure the clock. We don't have linux kernel drivers for the clock driving the HW, and this was useful for determining that the V3D HW is running on a slow clock, not that the driver was slow. Signed-off-by:
-
Eric Anholt authored
Once we push the job, the scheduler could run it and free it. So, if we want to reference their fences, we need to grab them before then. I haven't seen this happen in many days of conformance test runtime, but let's still close the race. Signed-off-by:
-
- 11 Oct, 2018 2 commits
-
-
José Roberto de Souza authored
drm_dp_cec_register_connector() is called when registering each DP connector in DRM, while sounds a good idea register CEC adapters as earlier as possible, it causes some driver initialization delay trying to do DPCD transactions in disconnected connectors. This change will cause no regressions as drm_dp_cec_set_edid() will still be called in further detection of connected connectors with a valid edid parameter. This change reduced the module load of i915 by average 0.5sec in a machine with just one DP port disconnected while reducing more than 3sec in a machine with 4 DP ports disconnected. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
YueHaibing authored
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 08 Oct, 2018 2 commits
-
-
Giulio Benetti authored
If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> Fixes: f11adcec ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Giulio Benetti authored
Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by:
-
- 05 Oct, 2018 9 commits
-
-
Daniel Vetter authored
It's for legacy drivers only (atomic ones should use drm_atomic_helper_check_plane_state() instead), and there's no users left except the one in the primary plane helpers. Signed-off-by:
-
Thomas Hellstrom authored
Use the correct helper and also return early on helper success rather than on helper failure. Also explicitly return 0 in the case of no fb. v2: Check for !fb after updating state->visible (Ville). Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
Well except the destroy helper, which isn't really a primary helper but generally useful, if mislabelled. v2: Keep some of the nice comments about the limitations of the primarmy plane helpers, and put them into the kerneldoc for drm_crtc_init() (Sam). Reviewed-by:
-
Daniel Vetter authored
Motivated by review comments from Ville&Sean. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by:
-
Daniel Vetter authored
Didn't get updated in a rework of the original patch. Fixes: 059b5eb5 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function") Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Daniel Vetter authored
With armada the last bigger driver that realistically needed these to convert from legacy kms to atomic is converted. These helpers have been broken more often than not the past 2 years, and as this little patch series shows, tricked a bunch of people into using the wrong helpers for their functions. Aside: I think a lot more drivers should be using the device-level drm_atomic_helper_shutdown/suspend/resume helpers and related functions. In almost all the cases they get things exactly right. Reviewed-by:
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. Reviewed-by:
Shawn Guo <shawnguo@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-15-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. v2: Rebase. Reviewed-by:
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. The sti cleanup code seems supremely confused: - In the load error path it calls drm_mode_config_cleanup before it stops various kms services like poll worker or fbdev emulation. That's going to oops. - The actual unload code doesn't even bother with the cleanup and just leaks. Try to fix this while at it. Reviewed-by:
-
