- 07 Jan, 2016 40 commits
-
-
Finn Thain authored
Implement a 'complete_cmd' function to complete commands. This is needed by the following patch; the new function provides a site for the logic needed to correctly handle REQUEST SENSE commands. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Hannes Reinecke <hare@suse.com> Tested-by:
Ondrej Zary <linux@rainbow-software.org> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Finn Thain authored
The NCR5380 drivers have a home-spun linked list implementation for scsi_cmnd structs that uses cmd->host_scribble as a 'next' pointer. Adopt the standard list_head data structure and list operations instead. Remove the eh_abort_handler rather than convert it. Doing the conversion would only be churn because the existing EH handlers don't work and get replaced in a subsequent patch. Signed-off-by:
-
Finn Thain authored
The hostdata struct is now protected by a spin lock so the volatile qualifiers are redundant. Remove them. Signed-off-by:
-
Finn Thain authored
Printing command pointers can be useful when debugging queues. Other than that, the LIST and REMOVE macros are just clutter. These macros are redundant now that NDEBUG_QUEUES causes pointers to be printed, so remove them. Signed-off-by:
-
Finn Thain authored
Print the command pointers in the log messages for debugging queue data structures. The LIST and REMOVE macros can then be removed. Signed-off-by:
-
Finn Thain authored
Make use of the shost_priv() helper. Remove HOSTDATA and SETUP_HOSTDATA macros because they harm readability. Signed-off-by:
-
Finn Thain authored
Replace all H_NO and some HOSTNO macros (both peculiar to atari_NCR5380.c) with a new dsprintk macro that's more useful and more consistent. The new macro avoids a lot of boilerplate in new code in subsequent patches. Keep NCR5380.c in sync. Remaining HOSTNO macros are removed as side-effects of subsequent patches. Signed-off-by:
-
Finn Thain authored
Some NCR5380 hosts offer a .show_info method to access the contents of the various command list data structures from a procfs file. When NDEBUG is set, the same information is sent to the console during EH. The two core drivers, atari_NCR5380.c and NCR5380.c differ here. Because it is just for debugging, the easiest way to fix the discrepancy is simply remove this code. The only remaining users of NCR5380_show_info() and NCR5380_write_info() are drivers that define PSEUDO_DMA. The others have no use for the .show_info method, so don't initialize it. Signed-off-by:
-
Finn Thain authored
NCR5380.c presently uses the instance->host_lock spin lock. Convert this to a new spin lock that protects the NCR5380_hostdata struct. atari_NCR5380.c previously used local_irq_save/restore() rather than a spin lock. Convert this to hostdata->lock in irq mode. For SMP platforms, the interrupt handler now also acquires the spin lock. This brings all locking in the two core drivers into agreement. Adding this locking also means that a bunch of volatile qualifiers can be removed from the members of the NCR5380_hostdata struct. This is done in a subsequent patch. Proper locking will allow the abort handler to locate a command being aborted. This is presently impossible if the abort handler is invoked when the command has been moved from a queue to a pointer on the stack. (If eh_abort_handler can't determine whether a command has been completed or is still being processed then it can't decide whether to return success or failure.) The hostdata spin lock is now held when calling NCR5380_select() and NCR5380_information_transfer(). Where possible, the lock is dropped for polling and PIO transfers. Clean up the now-redundant SELECT_ENABLE_REG writes, that used to provide limited mutual exclusion between information_transfer() and reselect(). Accessing hostdata->connected without data races means taking the lock; cleanup these accesses. The new spin lock falls away for m68k and other UP builds, so this should have little impact there. In the SMP case the new lock should be uncontested even when the SCSI bus is contested. Signed-off-by:
-
Finn Thain authored
Remove FLAG_DTC3181E. It was used to suppress a final Arbitration Lost (SEL asserted) test that isn't actually needed. The test was suppressed because it causes problems for DTC436 and DTC536 chips. It takes place after the host wins arbitration, so SEL has been asserted. These chips can't seem to tell whether it was the host or another bus device that did so. This questionable final test appears in a flow chart in an early NCR5380 datasheet. It was removed from later documents like the DP5380 datasheet. By the time this final test takes place, the driver has already tested the Arbitration Lost bit several times. The first test happens 3 us after BUS FREE (or longer due to register access delays). The protocol requires that a device stop signalling within 1.8 us after BUS FREE unless it won arbitration, in which case it must assert SEL, which is detected 1.2 us later by the first Arbitration Lost test. Signed-off-by:
-
Finn Thain authored
When a target reports a QUEUE_FULL condition it causes the driver to update the 'queue_size' limit with the number of currently allocated tags. At least, that's what's supposed to happen, according to the comments. Unfortunately the terms in the assignment are swapped. Fix this and cleanup some obsolete comments. Signed-off-by:
-
Finn Thain authored
Add missing .module initializer. Use distinct .proc_name values for the g_NCR5380 and g_NCR5380_mmio modules. Remove pointless CAN_QUEUE and CMD_PER_LUN override macros. Cleanup whitespace and code style. Signed-off-by:
-
Finn Thain authored
NDEBUG_NO_DATAOUT should not disable DATA IN phases too. Fix this. (This bug has long been fixed in atari_NCR5380.c.) Signed-off-by:
-
Finn Thain authored
Remove unused includes (stat.h, signal.h, proc_fs.h) and move includes needed by the core drivers into the common header (delay.h etc). Signed-off-by:
-
Finn Thain authored
Fix the array bounds check when transferring an extended message from the target. Signed-off-by:
-
Finn Thain authored
Bring the two NCR5380_reselect() implementations into agreement. Replace infinite loops in atari_NCR5380.c with timeouts, as per NCR5380.c. Remove 'abort' flag in NCR5380.c as per atari_NCR5380.c -- if reselection fails, there may be no MESSAGE IN phase so don't attempt data transfer. During selection, don't interfere with the chip registers after a reselection interrupt intervenes. Clean up some trivial issues with code style, comments and printk. Signed-off-by:
-
Finn Thain authored
The workarounds for chip errata appear twice, in slightly different forms. One is used when defined(REAL_DMA) || defined(REAL_DMA_POLL), the other when defined(PSEUDO_DMA). In the PDMA case, the workarounds have been made conditional on FLAG_NO_DMA_FIXUPS. Do the same for the DMA case, to eliminate the READ_OVERRUNS macro. Signed-off-by:
-
Finn Thain authored
The flags DMA_WORKS_RIGHT, FLAG_NCR53C400 and FLAG_HAS_LAST_BYTE_SENT all mean the same thing, i.e. the chip is not a 538[01]. (More recent devices such as the 53C80 have a 'Last Byte Sent' bit in the Target Command Register as well as other fixes for End-of-DMA errata.) These flags have no additional meanings since previous cleanup patches eliminated the NCR53C400 macro, moved g_NCR5380-specific code out of the core driver and standardized interrupt handling. Use the FLAG_NO_DMA_FIXUP flag to suppress End-of-DMA errata workarounds, for those cards and drivers that make use of the TCR_LAST_BYTE_SENT bit. Remove the old flags. Signed-off-by:
-
Finn Thain authored
SCSI bus protocol sometimes requires monitoring two related conditions simultaneously. Enhance NCR5380_poll_politely() for this purpose, and put it to use in the arbitration algorithm. It will also find use in pseudo DMA. Signed-off-by:
-
Finn Thain authored
Because interrupt handling is crucial to the core driver(s), all wrapper drivers need to agree on this code. This patch removes discrepancies. NCR5380_intr() in NCR5380.c has the following pointless loop that differs from the code in atari_NCR5380.c. done = 1; do { /* ... */ } while (!done); The 'done' flag gets cleared when a reconnected command is to be processed from the work queue. But in NCR5380.c, the flag is also used to cause the interrupt conditions to be re-examined. Perhaps this was because NCR5380_reselect() was expected to cause another interrupt, or perhaps the remaining present interrupt conditions need to be handled after the NCR5380_reselect() call? Actually, both possibilities are bogus, as is the loop itself. It seems have been overlooked in the hit-and-miss removal of scsi host instance list iteration many years ago; see history/history.git commit 491447e1 ("[PATCH] next NCR5380 updates") and commit 69e1a948 ("[PATCH] fix up NCR5380 private data"). See also my earlier patch, "Always retry arbitration and selection". The datasheet says, "IRQ can be reset simply by reading the Reset Parity/Interrupt Register". So don't treat the chip IRQ like a level-triggered interrupt. Of the conditions that set the IRQ flag, some are level-triggered and some are edge-triggered, which means IRQ itself must be edge-triggered. Some interrupt conditions are latched and some are not. Before clearing the chip IRQ flag, clear all state that may cause it to be raised. That means clearing the DMA Mode and Busy Monitor bits in the Mode Register and clearing the host ID in the Select Enable register. Also clean up some printk's and some comments. Keep atari_NCR5380.c and NCR5380.c in agreement. Signed-off-by: -
Finn Thain authored
Configuring core drivers using macros like this one prevents re-unifying the core driver forks, and prevents implementing the core driver as a library or a platform driver. The UNSAFE macro in particular is a poor workaround for the problem of interrupt latency. Releasing the locks complicates things because then we would have to handle the possibility of EH handler invocation during a PDMA transfer. The comments say that instead of using this macro, "you're going to be better off twiddling with transfersize". I agree. Remove this stuff. Signed-off-by:
-
Finn Thain authored
The complex main_running/queue_main mechanism is peculiar to atari_NCR5380.c. It isn't SMP safe and offers little value given that the work queue already offers concurrency management. Remove this complexity to bring atari_NCR5380.c closer to NCR5380.c. It is not a good idea to call the information transfer state machine from queuecommand because, according to Documentation/scsi/scsi_mid_low_api.txt that could happen in soft irq context. Fix this. Signed-off-by:
-
Finn Thain authored
Each host instance now has it's own work queue so the main() work item can sleep when necessary. That means we can use a simple work item rather than a delayed work item. This brings NCR5380.c closer to atari_NCR5380.c. Signed-off-by:
-
Finn Thain authored
When there is a queued command and no connected command, NCR5380_select() is called and arbitration begins. The chip waits for BUS FREE once the MR_ARBITRATE bit in the mode register is enabled. That means there is no need to wait for BUS FREE after disconnecting. There is presently no polling for BUS FREE after sending an ABORT or other message that might lead to disconnection. It only happens after COMMAND COMPLETE or DISCONNECT messages, which seems inconsistent. Remove the polling for !BSY in the COMMAND COMPLETE and DISCONNECT cases. BTW, the comments say "avoid nasty timeouts" and perhaps BUS FREE polling was somehow helpful back in Linux v0.99.14u, when it was introduced. The relevant timeout is presently 1 second (for bus arbitration). Signed-off-by:
-
Finn Thain authored
Allow target selection to fail with a timeout instead of waiting in infinite loops. This gets rid of the unused NCR_TIMEOUT macro, it is more defensive and has proved helpful in debugging. Signed-off-by:
-
Finn Thain authored
Use timeouts in do_abort() in atari_NCR5380.c instead of infinite loops. Also fix the kernel-doc comment. Keep the two core driver forks in sync. Signed-off-by:
-
Finn Thain authored
NCR5380_poll_politely() returns either 0 (success) or -ETIMEDOUT. However, in do_abort(), the return value is incorrectly taken to be the status register value. This means that the bus is put into DATA OUT phase instead of MESSAGE OUT. Fix this. Signed-off-by:
-
Finn Thain authored
NCR5380_poll_politely() never returns -1. That means do_abort() can fail to handle a timeout after waiting for the target to negate REQ. Fix this and cleanup other NCR5380_poll_politely() call sites. Signed-off-by:
-
Finn Thain authored
MESSAGE REJECT does not imply DISCONNECT: the target is about to enter MESSAGE IN or MESSAGE OUT phase. This bug fix comes from atari_NCR5380.c. Unfortunately it never made it into the original NCR5380.c core driver. Signed-off-by:
-
Hannes Reinecke authored
Some old drivers partially implemented support for linked commands using a "proposed" next_link pointer in struct scsi_cmnd that never actually existed. Remove this code. Signed-off-by:
-
Finn Thain authored
Remove the DEF_SCSI_QCMD macro (already removed from atari_NCR5380.c). The lock provided by DEF_SCSI_QCMD is only needed for queue data structures. Signed-off-by:
-
Finn Thain authored
The host spin lock needs to be acquired by NCR5380_abort() before it calls NCR5380_select(). This patch doesn't actually fix the EH issues in this driver but it does avoid this: BUG: spinlock already unlocked on CPU#0, kworker/u4:1/14 lock: 0xc0c0f834, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 CPU: 0 PID: 14 Comm: kworker/u4:1 Not tainted 3.15.5 #5 Workqueue: scsi_tmf_4 scmd_eh_abort_handler Call Trace: [ef885d70] [c0008acc] show_stack+0x70/0x1bc (unreliable) [ef885db0] [c0492a00] dump_stack+0x84/0x684 [ef885dc0] [c006f314] spin_dump+0xd0/0xe8 [ef885dd0] [c006f460] do_raw_spin_unlock+0xd4/0xd8 [ef885df0] [c0491c8c] _raw_spin_unlock_irq+0x10/0x3c [ef885e00] [f381fe3c] NCR5380_select+0x3e4/0x6e8 [dmx3191d] [ef885e40] [f382026c] NCR5380_abort+0x12c/0x190 [dmx3191d] [ef885e60] [c02fec9c] scmd_eh_abort_handler+0x100/0x460 [ef885e80] [c0046470] process_one_work+0x16c/0x420 [ef885ea0] [c0046870] worker_thread+0x14c/0x430 [ef885ed0] [c004e4f4] kthread+0xd8/0xec [ef885f40] [c00124d4] ret_from_kernel_thread+0x5c/0x64 Signed-off-by:
-
Finn Thain authored
According to the SCSI-2 draft revision 10L, atari_NCR5380.c is correct when it says that the phase lines are valid up until ACK is negated following the transmission of the last byte in MESSAGE IN phase. This is true for all information transfer phases, from target to initiator. Sample the phase bits in STATUS_REG so that NCR5380_transfer_pio() can return the correct result. The return value is presently unused (perhaps because of bugs like this) but this change at least fixes the caller's phase variable, which is passed by reference. Signed-off-by:
-
Finn Thain authored
The atari_NCR5380.c and NCR5380.c core drivers differ in their handling of target disconnection. This is partly because atari_NCR5380.c had all of the polling and sleeping removed to become entirely interrupt-driven, and it is partly because of damage done to NCR5380.c after atari_NCR5380.c was forked. See commit 37cd23b4 ("Linux 2.1.105") in history/history.git. The polling changes that were made in v2.1.105 are questionable at best: if REQ is not already asserted when NCR5380_transfer_pio() is invoked, and if the expected phase is DATA IN or DATA OUT, the function will schedule main() to execute after USLEEP_SLEEP jiffies and then return. The problems here are the expected REQ timing and the sleep interval*. Avoid this issue by using NCR5380_poll_politely() instead of scheduling main(). The atari_NCR5380.c core driver requires the use of the chip interrupt and always permits target disconnection. It sets the cmd->device->disconnect flag when a device disconnects, but never tests this flag. The NCR5380.c core driver permits disconnection only when instance->irq != NO_IRQ. It sets the cmd->device->disconnect flag when a device disconnects and it tests this flag in a couple of places: 1. During NCR5380_information_transfer(), following COMMAND OUT phase, if !cmd->device->disconnect, the initiator will take a guess as to whether or not the target will then choose to go to MESSAGE IN phase and disconnect. If the driver guesses "yes", it will schedule main() to execute after USLEEP_SLEEP jiffies and then return there. Unfortunately the driver may guess "yes" even after it has denied the target the disconnection privilege. When the target does not disconnect, the sleep can be beneficial, assuming the sleep interval is appropriate (mostly it is not*). And even if the driver guesses "yes" correctly, and the target would then disconnect, the driver still has to go through the MESSAGE IN phase in order to get to BUS FREE phase. The main loop can do nothing useful until BUS FREE, and sleeping just delays the phase transition. 2. If !cmd->device->disconnect and REQ is not already asserted when NCR5380_information_transfer() is invoked, the function polls for REQ for USLEEP_POLL jiffies. If REQ is not asserted, it then schedules main() to execute after USLEEP_SLEEP jiffies and returns. The idea is apparently to yeild the CPU while waiting for REQ. This is conditional upon !cmd->device->disconnect, but there seems to be no rhyme or reason for that. For example, the flag may be unset because disconnection privilege was denied because the driver has no IRQ. Or the flag may be unset because the device has never needed to disconnect before. Or if the flag is set, disconnection may have no relevance to the present bus phase. Another deficiency of the existing algorithm is as follows. When the driver has no IRQ, it prevents disconnection, and generally polls and sleeps more than it would normally. Now, if the driver is going to poll anyway, why not allow the target to disconnect? That way the driver can do something useful with the bus instead of polling unproductively! Avoid this pointless latency, complexity and guesswork by using NCR5380_poll_politely() instead of scheduling main(). * For g_NCR5380, the time intervals for USLEEP_SLEEP and USLEEP_POLL are 200 ms and 10 ms, respectively. They are 20 ms and 200 ms respectively for the other NCR5380 drivers. There doesn't seem to be any reason for this discrepancy. The timing seems to have no relation to the type of adapter. Bizarrely, the timing in g_NCR5380 seems to relate only to one particular type of target device. This patch attempts to solve the problem for all NCR5380 drivers and all target devices. Signed-off-by:
-
Finn Thain authored
Follow the example of the atari_NCR5380.c core driver and adopt the NCR5380_dma_xfer_len() hook. Implement NCR5380_dma_xfer_len() for dtc.c and g_NCR5380.c to take care of the limitations of these cards. Keep the default for drivers using PSEUDO_DMA. Eliminate the unused macro LIMIT_TRANSFERSIZE. Signed-off-by:
-
Finn Thain authored
If NCR5380_select() returns -1, it means arbitration was lost or selection failed and should be retried. If the main loop simply terminates when there are still commands on the issue queue, they will remain queued until they expire. Fix this by clearing the 'done' flag after selection failure or lost arbitration. The "else break" clause in NCR5380_main() that gets removed here appears to be a vestige of a long-gone loop that iterated over host instances. See commit 491447e1 ("[PATCH] next NCR5380 updates") in history/history.git. Signed-off-by:
-
Finn Thain authored
Linux v2.1.105 changed the algorithm for polling for the BSY signal in NCR5380_select() and NCR5380_main(). Presently, this code has a bug. Back then, NCR5380_set_timer(hostdata, 1) meant reschedule main() after sleeping for 10 ms. Repeated 25 times this provided the recommended 250 ms selection time-out delay. This got broken when HZ became configurable. We could fix this but there's no need to reschedule the main loop. This BSY polling presently happens when the NCR5380_main() work queue item calls NCR5380_select(), which in turn schedules NCR5380_main(), which calls NCR5380_select() again, and so on. This algorithm is a deviation from the simpler one in atari_NCR5380.c. The extra complexity and state is pointless. There's no reason to stop selection half-way and return to to the main loop when the main loop can do nothing useful until selection completes. So just poll for BSY. We can sleep while polling now that we have a suitable workqueue. Signed-off-by:
-
Finn Thain authored
When in process context, sleep during polling if doing so won't add significant latency. In interrupt context or if the lock is held, poll briefly then give up. Keep both core drivers in sync. Calibrate busy-wait iterations to allow for variation in chip register access times between different 5380 hardware implementations. Signed-off-by:
-
Finn Thain authored
Allocate a work queue that will permit busy waiting and sleeping. This means NCR5380_init() can potentially fail, so add this error path. Signed-off-by:
-
Finn Thain authored
Commit 8b801ead ("[ARM] rpc: update Acorn SCSI drivers to modern ecard interfaces") neglected to remove a request_region() call in cumana_1.c. Commit eda32612 ("[PATCH] give all LLDD driver a ->release method") in history/history.git added some pointless release_region() calls in dtc.c, pas16.c and t128.c. Fix these issues. Signed-off-by:
-
