- 18 Feb, 2016 38 commits
-
-
Anjali Singhai Jain authored
This patch falls back to enabling unicast, multicast and broadcast promiscuous mode when the driver must disable it's use of "default port" aka defport mode (which is normally used to provide a promiscuous mode), due to internal incompatibility with Multiple Function per Port (aka MFP). The situation that requires this patch is when Physical Function 0 is the device being used, and it can support SR-IOV when MFP is enabled, via the driver creating a VEB on an MFP enabled adapter. Change-ID: Ie90b00d0d58782a5dfcf2c3c9725a2eb90bd63d8 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
This patch adds a workaround for cases where we might have interrupts that got lost but WB happened. If that happens without this patch we will see a tx_timeout. To work around it, this patch goes ahead and reschedules NAPI in that situation, if NAPI is not already scheduled. We also add a counter in ethtool to keep track of when we detect a case of tx_lost_interrupt. Note: napi_reschedule() can be safely called from process/service_task context and is done in other drivers as well without an issue. Change-ID: I00f98f1ce3774524d9421227652bef20fcbd0d20 Signed-off-by:
-
Jesse Brandeburg authored
This patch makes use of a pointer called hw consistent in the i40e_remove function. Change-ID: Idacc7ff0a09a68289c57457a78618bf5497de077 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Mitch Williams authored
Support packet split receive on VFs. This is off by default but can be enabled using ethtool private flags. Because we need to trigger a reset from outside of i40evf_main.c, create a new function to do so, and export it. Also update copyright year in file headers. Change-ID: I721aa5d70113d3d6d94102e5f31526f6fc57cbbb Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Jesse Brandeburg authored
There was a completely unused file "dump" in debugfs that never panned out to be useful. Change-ID: I12bb9e37b5a83299725dda815a8746157baf6562 Signed-off-by:
-
Mitch Williams authored
We have a define for this, use it. No functional change. Change-ID: Ic0e3ea4f562e46de63b2a8de07f291ccc10205fd Signed-off-by:
-
David S. Miller authored
Jiri Benc says: ==================== vxlan: clean up rx path, consolidating extension handling The rx path of VXLAN turned over time into kind of spaghetti code. The rx processing is split between vxlan_udp_encap_recv and vxlan_rcv but in an artificial way: vxlan_rcv is just called at the end of vxlan_udp_encap_recv, continuing the rx processing where vxlan_udp_encap_recv left it. There's no clear border between those two functions. It makes sense to combine those functions into one; this will be actually needed for VXLAN-GPE where we'll need to skip part of the processing which is hard to do with the current code. However, both functions are too long already. This patchset is shortening them, consolidating extension handling that is spread all around together and moving it to separate functions. (Later patchsets will do more consolidation in other parts of the functions with the final goal of merging vxlan_udp_encap_recv and vxlan_rcv.) In process of consolidation of the extension handling, I needed to deal with vni field in a generic way, as its lower 8 bits mean different things for different extensions. While cleaning up the code to strictly distinguish between "vni" and "vni field" (which contains vni plus an additional byte), I also converted the code not to convert endianess back and forth. The full picture can be seen at: https://github.com/jbenc/linux-vxlan/commits/master ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
For metadata based tunnels, VNI is ignored when doing vxlan device lookups (because such tunnel receives all VNIs). However, this was not honored by vxlan_xmit_one when doing encapsulation bypass. Move the check for metadata based tunnel to the common place where it belongs. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
When there are unrecognized flags present in the vxlan header, it doesn't make much sense to return the packet for further UDP processing, especially considering that for other invalid flag combinations we drop the packet because of previous checks. This means we return positive value only at the beginning of the function where tun_dst is not yet allocated. This allows us to get rid of the bad_flags and error jump labels. When we're dropping packet, we need to free tun_dst now. Signed-off-by:
-
Jiri Benc authored
Bring the extension handling to a single place and move the actual handling logic out of vxlan_udp_encap_recv as much as possible. Signed-off-by:
-
Jiri Benc authored
To make vxlan_udp_encap_recv shorter and more comprehensible. Signed-off-by:
-
Jiri Benc authored
Part of the parameters is not needed. Simplify the caller of this function in preparation of making vxlan rx more comprehensible. Signed-off-by:
-
Jiri Benc authored
Prevent repeated conversions from and to network order in the fast path. To achieve this, define all flag constants in big endian order and store VNI as __be32. To prevent confusion between the actual VNI value and the VNI field from the header (which contains additional reserved byte), strictly distinguish between "vni" and "vni_field". Signed-off-by:
-
Jiri Benc authored
Currently, pointer to the vxlan header is kept in a local variable. It has to be reloaded whenever the pskb pull operations are performed which usually happens somewhere deep in called functions. Create a vxlan_hdr function and use it to reference the vxlan header instead. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-02-17 This series contains updates to i40e/i40evf only (again). Jesse moves sync_vsi_filters() up in the service_task because it may need to request a reset, and we do not want to wait another round of service task time. Refactored the enable_icr0() in order to allow it to be decided by the caller whether the CLEARPBA (clear pending events) bit will be set while re-enabling the interrupt. Also provides the "Don't Give Up" patch, where the driver will keep polling trying to allocate receive buffers until it succeeds. This should keep all receive queues running even in the face of memory pressure. Cleans up the debugging helpers by putting everything in hex to be consistent. Neerav updates the DCB firmware version related checkes specific to X710 and XL710 only since the checks are not required for X722 devices. Shannon adds the use of the new shared MAC filter bit for multicast and broadcast filters in order to make better use of the filters available from the device. Added a parameter to allow the driver to set the enable/disable of statistics gathering in the hardware switch. Also the L2 cloud filtering parameter is removed since it was never used. Anjali refactors the force_wb and WB_ON_ITR functionality since Force-WriteBack functionality in X710/XL710 devices has been moved out of the clean routine and into the service task, so we need to make sure WriteBack-On-ITR is separated out since it is still called from clean. Catherine changes the VF driver string to reflect all the products that are supported. Mitch refactors the packet split receive code to properly use half-pages for receives. Also changes the use of bitwise operators to logical operators on clean_complete variable, while making a witty reference to Mr. Spock. Cleans up (i.e. removes) the hsplit field in the ring structure and use the existing macro to detect packet split enablement, which allows debugfs dumps of the VSI to properly show which recevie routine is in use. ==================== Signed-off-by: -
David S. Miller authored
Jiri Pirko says: ==================== rocker: do world split This patchset allows new rocker worlds to be easily added in future. Two new worlds are now under development: P4 and eBPF. The main part of the patchset is the OF-DPA carve-out. It resuts in OF-DPA specific file. Clean cut. Note this patchset is based on my original attempt in October 2015. I had to rebase, included all suggestions and did lot of small changes. Main change to go with all-port-one-world approach. Port world is set according to what is setup in HW. Not possible to change worlds from driver. v1->v2: patch 12/13: - split port_init into pre-init and init ==================== Signed-off-by: -
Jiri Pirko authored
Suggested-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Jiri Pirko authored
Carve out OF-DPA would specific code from the common file to the world file. This change required struct rocker and struct rocker_port split into world specific struct ofdpa and struct ofdpa_port. Along with this the world specific functions and defines were renamed from prefix "rocker_" to "ofdpa_". Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
No need to push down rocker flags just to check if this is nowait or not. Let the caller handle that. Signed-off-by:
-
Jiri Pirko authored
The only purpose of passing this parameter is to check for prepare phase. The only reason for a failure in that state is if TLVs don't fit into descriptor. That is highly unlikely and if that happens, it is a driver bug. So remove this parameter from rocker_cmd_exec, and check for prepare phase in caller. Signed-off-by:
-
Jiri Pirko authored
This avoids need to alloc/free wait structure for every command call. Signed-off-by:
-
Jiri Pirko authored
Be consistent with the rest of the setting functions, and pass "learning" as a bool function parameter. Signed-off-by:
-
Jiri Pirko authored
This is another step on the way to per-world clean cut. Introduce world ops hooks which each world can implement in world-specific way. Also introduce world infrastructure along with OF-DPA world stub. Signed-off-by:
-
Jiri Pirko authored
And take some other related thing along. They are going to be pushed into of-dpa part anyway. Signed-off-by:
-
Jiri Pirko authored
Introduce a helper to ask HW for the port mode (world). Signed-off-by:
-
Jiri Pirko authored
Carve out TLV processing helpers into separate files. Signed-off-by:
-
Jiri Pirko authored
Since "rocker.c" is going to be split into multiple files, start with renaming original "rocker.c" file to "rocker_main.c". Multiple code parts are going to be cut from "rocker_main.c" later on. Fix couple of checkpatch issues on the way. Signed-off-by:
-
Jiri Pirko authored
Since "rocker.h" file is going to be used for different purpose, rename the hardware-specific header to "rocker_hw.h". Signed-off-by:
-
Jiri Pirko authored
No need to pass rocker_port around to alloc/free rocker functions, since they now use switchdev_trans for memory management storage. With the param removal, shorten the name of the functions since they now has nothing to do with rocker port. Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== Add support for Classifier and RSS This patch set enables, (i) Classifier engine that is used for parsing through the packet and extracting a search string that is then used to search a database to find associative data. (ii) Receive Side Scaling (RSS) that does dynamic load balancing of the CPUs by controlling the number of messages enqueued per CPU though the help of Toeplitz Hash function of 4-tuple of source TCP/UDP port, destination TCP/UDP port, source IPV4 address and destination IPV4 address. (iii) Multi queue, to make advantage of RSS v3: Address review comments from v2 - reordered local variables from longest to shortlest line v2: Address review comments from v1 - fix kbuild warning - add default coalescing v1: - Initial version ==================== Signed-off-by:Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
Khuong Dinh <kdinh@apm.com> Signed-off-by:
Tanmay Inamdar <tinamdar@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Zhang Shengju authored
Since function vlan_proc_rem_dev() will only return 0, it's better to return void instead of int. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
-
John Fastabend authored
By packing the structure we can remove a few holes as Jamal suggests. before: struct tc_cls_u32_knode { struct tcf_exts * exts; /* 0 8 */ u8 fshift; /* 8 1 */ /* XXX 3 bytes hole, try to pack */ u32 handle; /* 12 4 */ u32 val; /* 16 4 */ u32 mask; /* 20 4 */ u32 link_handle; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ struct tc_u32_sel * sel; /* 32 8 */ /* size: 40, cachelines: 1, members: 7 */ /* sum members: 33, holes: 2, sum holes: 7 */ /* last cacheline: 40 bytes */ }; after: struct tc_cls_u32_knode { struct tcf_exts * exts; /* 0 8 */ struct tc_u32_sel * sel; /* 8 8 */ u32 handle; /* 16 4 */ u32 val; /* 20 4 */ u32 mask; /* 24 4 */ u32 link_handle; /* 28 4 */ u8 fshift; /* 32 1 */ /* size: 40, cachelines: 1, members: 7 */ /* padding: 7 */ /* last cacheline: 40 bytes */ }; Suggested-by:Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
John Fastabend authored
Fixes: 9d35cf06 ("net: ixgbe: add minimal parser details for ixgbe") Reported-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
-
John Fastabend authored
I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf06 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by:
-
- 17 Feb, 2016 2 commits
-
-
Jesse Brandeburg authored
Bump version to i40e-1.4.13 and i40evf-1.4.9 Change-ID: I9db37f9d4899141c3e5455dfb456d45465b8c035 Signed-off-by:
-
Mitch Williams authored
Get rid of the unused hsplit field in the ring struct and use the existing macro to detect packet split enablement. This allows debugfs dumps of the VSI to properly show which Rx routine is in use. Change-ID: Ic4e9589e6a788ab196ed0850703f704e30c03781 Signed-off-by:
-
