Pad is a separate type. Even though in practice they can
only be a u32 the value should be discarded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Code gen for stats is a bit of a challenge, but from looking
at the attrs I think that the format isn't quite right.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

UDP tunnel and cable test messages have a lot of nests,
which do not match the names of the enum entries in C uAPI.
Some of the structure / nesting also looks wrong.

Untangle this a little bit based on the names, comments and
educated guesses, I haven't actually tested the results.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

C does not allow defining structures and enums with the same name.
Since enum ethtool_stringset exists in the uAPI we need to include
at least a stub of it in the spec. This will trigger name collision
avoidance in the code gen.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethtool has an attribute set called stringset, from which
we'll generate struct ethtool_stringset. Unfortunately,
the old ethtool header declares enum ethtool_stringset
(the same name), to which compilers object.

This seems unavoidable. Check struct names against known
constants and append an underscore if conflict is detected.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If attr set or enum has empty enum name we need to use u32 or int
as function arguments and struct members.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most of the C enum names are guessed correctly, but there
is a handful of corner cases we need to name explicitly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethtool's PSE PoDL has a attr nest with different prefixes:

/* Power Sourcing Equipment */
enum {
	ETHTOOL_A_PSE_UNSPEC,
	ETHTOOL_A_PSE_HEADER,			/* nest - _A_HEADER_* */
	ETHTOOL_A_PODL_PSE_ADMIN_STATE,		/* u32 */
	ETHTOOL_A_PODL_PSE_ADMIN_CONTROL,	/* u32 */
	ETHTOOL_A_PODL_PSE_PW_D_STATUS,		/* u32 */

Header has a prefix of ETHTOOL_A_PSE_ and other attrs prefix of
ETHTOOL_A_PODL_PSE_ we can't cover them uniformly.
If PODL was after PSE life would be easy.

Now we either need to add prefixes to attr names which is yucky
or support setting prefix name per attr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ynl-regen needs to know the arguments used to generate a file.
Record excluded ops and, while at it, user headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool family has a small handful of quite tricky ops
and a lot of simple very useful ops. Teach ynl-gen to skip
ops so that we can bypass the tricky ones.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Mikhalitsyn says:

====================
Add SCM_PIDFD and SO_PEERPIDFD

1. Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS,
but it contains pidfd instead of plain pid, which allows programmers not
to care about PID reuse problem.

2. Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd.
This thing is direct analog of SO_PEERCRED which allows to get plain PID.

3. Add SCM_PIDFD / SO_PEERPIDFD kselftest

Idea comes from UAPI kernel group:
https://uapi-group.org/kernel-features/

Big thanks to Christian Brauner and Lennart Poettering for productive
discussions about this and Luca Boccassi for testing and reviewing this.

=== Motivation behind this patchset

Eric Dumazet raised a question:
> It seems that we already can use pidfd_open() (since linux-5.3), and
> pass the resulting fd in af_unix SCM_RIGHTS message ?

Yes, it's possible, but it means that from the receiver side we need
to trust the sent pidfd (in SCM_RIGHTS),
or always use combination of SCM_RIGHTS+SCM_CREDENTIALS, then we can
extract pidfd from SCM_RIGHTS,
then acquire plain pid from pidfd and after compare it with the pid
from SCM_CREDENTIALS.

A few comments from other folks regarding this.

Christian Brauner wrote:

>Let me try and provide some of the missing background.

>There are a range of use-cases where we would like to authenticate a
>client through sockets without being susceptible to PID recycling
>attacks. Currently, we can't do this as the race isn't fully fixable.
>We can only apply mitigations.

>What this patchset will allows us to do is to get a pidfd without the
>client having to send us an fd explicitly via SCM_RIGHTS. As that's
>already possibly as you correctly point out.

>But for protocols like polkit this is quite important. Every message is
>standalone and we would need to force a complete protocol change where
>we would need to require that every client allocate and send a pidfd via
>SCM_RIGHTS. That would also mean patching through all polkit users.

>For something like systemd-journald where we provide logging facilities
>and want to add metadata to the log we would also immensely benefit from
>being able to get a receiver-side controlled pidfd.

>With the message type we envisioned we don't need to change the sender
>at all and can be safe against pid recycling.

>Link: https://gitlab.freedesktop.org/polkit/polkit/-/merge_requests/154
>Link: https://uapi-group.org/kernel-features

Lennart Poettering wrote:

>So yes, this is of course possible, but it would mean the pidfd would
>have to be transported as part of the user protocol, explicitly sent
>by the sender. (Moreover, the receiver after receiving the pidfd would
>then still have to somehow be able to prove that the pidfd it just
>received actually refers to the peer's process and not some random
>process. – this part is actually solvable in userspace, but ugly)

>The big thing is simply that we want that the pidfd is associated
>*implicity* with each AF_UNIX connection, not explicitly. A lot of
>userspace already relies on this, both in the authentication area
>(polkit) as well as in the logging area (systemd-journald). Right now
>using the PID field from SO_PEERCREDS/SCM_CREDENTIALS is racy though
>and very hard to get right. Making this available as pidfd too, would
>solve this raciness, without otherwise changing semantics of it all:
>receivers can still enable the creds stuff as they wish, and the data
>is then implicitly appended to the connections/datagrams the sender
>initiates.

>Or to turn this around: things like polkit are typically used to
>authenticate arbitrary dbus methods calls: some service implements a
>dbus method call, and when an unprivileged client then issues that
>call, it will take the client's info, go to polkit and ask it if this
>is ok. If we wanted to send the pidfd as part of the protocol we
>basically would have to extend every single method call to contain the
>client's pidfd along with it as an additional argument, which would be
>a massive undertaking: it would change the prototypes of basically
>*all* methods a service defines… And that's just ugly.

>Note that Alex' patch set doesn't expose anything that wasn't exposed
>before, or attach, propagate what wasn't before. All it does, is make
>the field already available anyway (the struct ucred .pid field)
>available also in a better way (as a pidfd), to solve a variety of
>races, with no effect on the protocol actually spoken within the
>AF_UNIX transport. It's a seamless improvement of the status quo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Let's make CONFIG_UNIX a bool instead of a tristate.
We've decided to do that during discussion about SCM_PIDFD patchset [1].

[1] https://lore.kernel.org/lkml/20230524081933.44dc8bea@kernel.org/

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Basic test to check consistency between:
- SCM_CREDENTIALS and SCM_PIDFD
- SO_PEERCRED and SO_PEERPIDFD

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd.
This thing is direct analog of SO_PEERCRED which allows to get plain PID.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS,
but it contains pidfd instead of plain pid, which allows programmers not
to care about PID reuse problem.

We mask SO_PASSPIDFD feature if CONFIG_UNIX is not builtin because
it depends on a pidfd_prepare() API which is not exported to the kernel
modules.

Idea comes from UAPI kernel group:
https://uapi-group.org/kernel-features/

Big thanks to Christian Brauner and Lennart Poettering for productive
discussions about this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Tested-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says:

====================
mlxsw: Cleanups in router code

This patchset moves some router-related code from spectrum.c to
spectrum_router.c where it should be. It also simplifies handlers of
netevent notifications.

- Patch #1 caches router pointer in a dedicated variable. This obviates the
  need to access the same as mlxsw_sp->router, making lines shorter, and
  permitting a future patch to add code that fits within 80 character
  limit.

- Patch #2 moves IP / IPv6 validation notifier blocks from spectrum.c
  to spectrum_router, where the handlers are anyway.

- In patch #3, pass router pointer to scheduler of deferred work directly,
  instead of having it deduce it on its own.

- This makes the router pointer available in the handler function
  mlxsw_sp_router_netevent_event(), so in patch #4, use it directly,
  instead of finding it through mlxsw_sp_port.

- In patch #5, extend mlxsw_sp_router_schedule_work() so that the
  NETEVENT_NEIGH_UPDATE handler can use it directly instead of inlining
  equivalent code.

- In patches #6 and #7, add helpers for two common operations involving
  a backing netdev of a RIF. This makes it unnecessary for the function
  mlxsw_sp_rif_dev() to be visible outside of the router module, so in
  patch #8, hide it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the external users of mlxsw_sp_rif_dev() have been converted in
the preceding patches, make the function static.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a number of places, a netdevice underlying a RIF is obtained only to
compare it to another pointer. In order to clean up the interface between
the router and the other modules, add a new helper to specifically answer
this question, and convert the relevant uses to this new interface.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a number of places, a netdevice underlying a RIF is obtained only to
check if it a NULL pointer. In order to clean up the interface between the
router and the other modules, add a new helper to specifically answer this
question, and convert the relevant uses to this new interface.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the struct mlxsw_sp_netevent_work.n field initialization is moved
here, the body of code that handles NETEVENT_NEIGH_UPDATE is almost
identical to the one in the helper function. Therefore defer to the helper
instead of inlining the equivalent.

Note that previously, the code took and put a reference of the netdevice.
The new code defers to mlxsw_sp_dev_lower_is_port() to obviate the need for
taking the reference.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This code handles NETEVENT_DELAY_PROBE_TIME_UPDATE, which is invoked every
time the delay_probe_time changes. mlxsw router currently only maintains
one timer, so the last delay_probe_time set wins.

Currently, mlxsw uses mlxsw_sp_port_lower_dev_hold() to find a reference to
the router. This is no longer necessary. But as a side effect, this makes
sure that only updates to "interesting netdevices" (ones that have a
physical netdevice lower) are projected.

Retain that side effect by calling mlxsw_sp_port_dev_lower_find_rcu() and
punting if there is none. Then just proceed using the router pointer that's
already at hand in the helper.

Note that previously, the code took and put a reference of the netdevice.
Because the mlxsw_sp pointer is now obtained from the notifier block, the
port pointer (non-) NULL-ness is all that's relevant, and the reference
does not need to be taken anymore.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of passing a notifier block and deducing the router pointer from
that in the helper, do that in the caller, and pass the result. In the
following patches, the pointer will also be made useful in the caller.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The validation logic is already in the router code. Move there the notifier
blocks themselves as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make mlxsw_sp_router_fini() more similar to the _init() function (and more
concise) by extracting the `router' handle to a named variable and using
that throughout. The availability of a dedicated `router' variable will
come in handy in following patches.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since its introduction, the ovs module execute_hash action allowed
hash algorithms other than the skb->l4_hash to be used.  However,
additional hash algorithms were not implemented.  This means flows
requiring different hash distributions weren't able to use the
kernel datapath.

Now, introduce support for symmetric hashing algorithm as an
alternative hash supported by the ovs module using the flow
dissector.

Output of flow using l4_sym hash:

    recirc_id(0),in_port(3),eth(),eth_type(0x0800),
    ipv4(dst=64.0.0.0/192.0.0.0,proto=6,frag=no), packets:30473425,
    bytes:45902883702, used:0.000s, flags:SP.,
    actions:hash(sym_l4(0)),recirc(0xd)

Some performance testing with no GRO/GSO, two veths, single flow:

    hash(l4(0)):      4.35 GBits/s
    hash(l4_sym(0)):  4.24 GBits/s
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Fixes for taprio xstats

1. Taprio classes correspond to TXQs, and thus, class stats are TXQ
   stats not TC stats.
2. Drivers reporting taprio xstats should report xstats for *this*
   taprio, not for a previous one.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the window_drop stats persist even if an incorrect Qdisc was
removed from the interface and a new one is installed. This is because
the enetc driver keeps the state, and that is persistent across multiple
Qdiscs.

To resolve the issue, clear all win_drop counters from all TX queues
when the currently active Qdisc is removed. These counters are zero
by default. The counters visible in ethtool -S are also affected,
but I don't care very much about preserving those enough to keep them
monotonically incrementing.

Fixes: 4802fca8 ("net: enetc: report statistics counters for taprio")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The taprio Qdisc creates child classes per netdev TX queue, but
taprio_dump_class_stats() currently reports offload statistics per
traffic class. Traffic classes are groups of TXQs sharing the same
dequeue priority, so this is incorrect and we shouldn't be bundling up
the TXQ stats when reporting them, as we currently do in enetc.

Modify the API from taprio to drivers such that they report TXQ offload
stats and not TC offload stats.

There is no change in the UAPI or in the global Qdisc stats.

Fixes: 6c1adb65 ("net/sched: taprio: add netlink reporting for offload statistics counters")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a __be16 variable to store the big endian value of header in
nxp_nci_i2c_fw_read().

Flagged by Sparse as:

 .../i2c.c:113:22: warning: cast to restricted __be16

No functional changes intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

To support vlan, use MANA_LONG_PKT_FMT if vlan tag is present in TX
skb. Then extract the vlan tag from the skb struct, and save it to
tx_oob for the NIC to transmit. For vlan tags on the payload, they
are accepted by the NIC too.

For RX, extract the vlan tag from CQE and put it into skb.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reuse the work done for EF100 to add devlink support for EF10.
There is no devlink port support for EF10.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

./net/sched/act_pedit.c:245:21-28: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5478Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Following the example of 'commit 9a0f830f ("ethtool: linkstate:
add a statistic for PHY down events")', added support for link down
events.

Add callback ionic_get_link_ext_stats to ionic_ethtool.c to support
link_down_count, a property of netdev that gets reported exclusively
on physical link down events.

Run ethtool -I <devname> to display the device link down count.
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
ice: Improve miscellaneous interrupt code

Jacob Keller says:

This series improves the driver's use of the threaded IRQ and the
communication between ice_misc_intr() and the ice_misc_intr_thread_fn()
which was previously introduced by commit 1229b339 ("ice: Add low
latency Tx timestamp read").

First, a new custom enumerated return value is used instead of a boolean for
ice_ptp_process_ts(). This significantly reduces the cognitive burden when
reviewing the logic for this function, as the expected action is clear from
the return value name.

Second, the unconditional loop in ice_misc_intr_thread_fn() is removed,
replacing it with a write to the Other Interrupt Cause register. This causes
the MAC to trigger the Tx timestamp interrupt again. This makes it possible
to safely use the ice_misc_intr_thread_fn() to handle other tasks beyond
just the Tx timestamps. It is also easier to reason about since the thread
function will exit cleanly if we do something like disable the interrupt and
call synchronize_irq().

Third, refactor the handling for external timestamp events to use the
miscellaneous thread function. This resolves an issue with the external
time stamps getting blocked while processing the periodic work function
task.

Fourth, a simplification of the ice_misc_intr() function to always return
IRQ_WAKE_THREAD, and schedule the ice service task in the
ice_misc_intr_thread_fn() instead.

Finally, the Other Interrupt Cause is kept disabled over the thread function
processing, rather than immediately re-enabled.

Special thanks to Michal Schmidt for the careful review of the series and
pointing out my misunderstandings of the kernel IRQ code. It has been
determined that the race outlined as being fixed in previous series was
actually introduced by this series itself, which I've since corrected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds runtime pm support for 7560.

As part of probe procedure auto suspend is enabled and auto suspend
delay is set to 5000 ms for runtime pm use. Later auto flag is set
to power manage the device at run time.

On successful communication establishment between host and device the
device usage counter is dropped and request to put the device into
sleep state (suspend).

In TX path, the device usage counter is raised and device is moved out
of sleep(resume) for data transmission. In RX path, if the device has
some data to be sent it request host platform to change the power state
by giving PCI PME message.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the bindings document for Xilinx AXI Ethernet Subsystem
from txt to yaml. No changes to existing binding description.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Sarath Babu Naidu Gaddam <sarath.babu.naidu.gaddam@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The iproute2 output that eventually landed upstream is different than
the one used in this test, resulting in failures. Fix by adjusting the
test to use iproute2's JSON output, which is more stable than regular
output.

Fixes: 305c0418 ("selftests: net: vxlan: Add tests for vxlan nolocalbypass option.")
Signed-off-by: Vladimir Nikishkin <vladimir@nikishkin.pw>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yoshihiro Shimoda says:

====================
net: renesas: rswitch: Improve perfromance of TX/RX

This patch series is based on net-next.git / main branch [1]. This patch
series can improve perfromance of TX in a specific condition. The previous code
used "global rate limiter" feature so that this is possible to cause
performance down if we use multiple ports at the same time. To resolve this
issue, use "hardware pause" features of GWCA and COMA. Note that this is not
related to the ethernet PAUSE frames.

< UDP TX by iperf3 >
 before: about 450Mbps on both tsn0 and tsn1
 after:  about 950Mbps on both tsn0 and tsn1

Also, this patch series can improve performance of RX by using
napi_gro_receive().

< TCP RX by iperf >
 before: about 670Mbps on tsn0
 after:  about 840Mbps on tsn0

[1]
The commit e06bd5e3 ("Merge branch 'followup-fixes-for-the-dwmac-and-altera-lynx-conversion'")

Changes from v3:
https://lore.kernel.org/all/20230607015641.1724057-1-yoshihiro.shimoda.uh@renesas.com/
 - Rebased on the latest net-next.git / main branch.
 - Added Reviewed-by in the patch 2/2. (Maciej, thanks!)
 - Fix typos in the commit description in the patch 2/2.

Changes from v2:
https://lore.kernel.org/all/20230606085558.1708766-1-yoshihiro.shimoda.uh@renesas.com/
 - Rebased on the latest net-next.git / main branch.
 - Added Reviewed-by in the patch 1/2. (Maciej, thanks!)
 - Revise the commit description in the patch 2/2.
 - Add definition to remove magic hardcoded numbers in the patch 2/2.

Changes from v1:
https://lore.kernel.org/all/20230529080840.1156458-1-yoshihiro.shimoda.uh@renesas.com/
 - Rebased on the latest net-next.git / main branch.
 - Use "hardware pause" feature instead of "per-queue limiter" feature.
 - Drop refactaring for "per-queue limiter".
 - Drop dt-bindings update because "hardware pause" doesn't need additional
   clock information.
 - Use napi_gro_receive() to improve RX performance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>