1. Add wait_for_sc_completion_timeout() for waiting the response and
   handling common response errors
2. Send sc's synchronously: remove unused callback function,
   and context structure; use wait_for_sc_completion_timeout() to wait
   its response.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Set LIO_SC_MAX_TMO_MS as the maximum timeout value for a soft command
   (sc).  All sc's use this value as a hard timeout value. Add expiry_time
   in struct octeon_soft_command to keep the hard timeout value. The field
   wait_time and timeout in struct octeon_soft_command will be obsoleted in
   the last patch of this patch series.
2. Add processing a synchronous sc in sc response thread
   lio_process_ordered_list. The memory allocated for a synchronous sc will
   be freed by lio_process_ordered_list() to the sc pool.
3. Add two response lists for lio_process_ordered_list to process the
   storage allocated for sc's:
   OCTEON_DONE_SC_LIST response list keeps all sc's which will be freed to
   the pool after their requestors have finished processing the responses.
   OCTEON_ZOMBIE_SC_LIST response list keeps all sc's which have got
   LIO_SC_MAX_TMO_MS timeout.
   When an sc gets a hard timeout, lio_process_order_list() will recheck
   its status 1 ms later. If the status has not updated by the firmware at
   that time, the sc will be removed from OCTEON_DONE_SC_LIST response list
   to OCTEON_ZOMBIE_SC_LIST response list. The sc's in the
   OCTEON_ZOMBIE_SC_LIST response list will be freed when the driver is
   unloaded.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

decrypt_skb fails if the number of sg elements required to map it
is greater than MAX_SKB_FRAGS. nsg must always be calculated, but
skb_cow_data adds unnecessary memcpy's for the zerocopy case.

The new function skb_nsg calculates the number of scatterlist elements
required to map the skb without the extra overhead of skb_cow_data.
This patch reduces memcpy by 50% on my encrypted NBD benchmarks.
Reported-by: Vakul Garg <Vakul.garg@nxp.com>
Reviewed-by: Vakul Garg <Vakul.garg@nxp.com>
Tested-by: Vakul Garg <Vakul.garg@nxp.com>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for 64-bit platforms to driver.

The hardware only supports 32-bit register accesses
so the accesses need to be split up into two writes
when setting the current and tail descriptor values.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This test creates a raw IPv4 socket, fragments a largish UDP
datagram and sends the fragments out of order.

Then repeats in a loop with different message and fragment lengths.

Then does the same with overlapping fragments (with overlapping
fragments the expectation is that the recv times out).

Tested:

root@<host># time ./ip_defrag.sh
ipv4 defrag
PASS
ipv4 defrag with overlaps
PASS

real    1m7.679s
user    0m0.628s
sys     0m2.242s

A similar test for IPv6 is to follow.
Signed-off-by: Peter Oskolkov <posk@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current behavior of IP defragmentation is inconsistent:
- some overlapping/wrong length fragments are dropped without
  affecting the queue;
- most overlapping fragments cause the whole frag queue to be dropped.

This patch brings consistency: if a bad fragment is detected,
the whole frag queue is dropped. Two major benefits:
- fail fast: corrupted frag queues are cleared immediately, instead of
  by timeout;
- testing of overlapping fragments is now much easier: any kind of
  random fragment length mutation now leads to the frag queue being
  discarded (IP packet dropped); before this patch, some overlaps were
  "corrected", with tests not seeing expected packet drops.

Note that in one case (see "if (end&7)" conditional) the current
behavior is preserved as there are concerns that this could be
legitimate padding.
Signed-off-by: Peter Oskolkov <posk@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In lio_enable_irq, the pkt_in_done count register was being cleared to
zero.  However, there could be some completed instructions which were not
yet processed due to budget and limit constraints.
So, only write this register with the number of actual completions
that were processed.
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kubecek says:

====================
ethtool: drop get_settings and set_settings ops

As Andrew Lunn pointed out in recent discussion, there is only one in tree
driver left which still defines deprecated callbacks get_settings() and
set_settings() in ethtool_ops. First patch converts this driver to
get_link_ksettings() and set_link_ksettings(). Second patch then removes
the deprecated callbacks from struct ethtool_ops and ethtool code which
falls back to them.

This doesn't break old versions of ethtool or any other userspace code
using ETHTOOL_{G,S}SET. We still implement both (old) ETHTOOL_{G,S}SET and
(new) ETHTOOL_{G,S}LINKSETTINGS ioctl commands but after this series both
will be implemented only using {g,s}et_link_ksettings(). The only affected
code would be out of tree NIC drivers which have not been converted yet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since [gs]et_settings ethtool_ops callbacks have been deprecated in
February 2016, all in tree NIC drivers have been converted to provide
[gs]et_link_ksettings() and out of tree drivers have had enough time to do
the same.

Drop get_settings() and set_settings() and implement both ETHTOOL_[GS]SET
and ETHTOOL_[GS]LINKSETTINGS only using [gs]et_link_ksettings().
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the last in-tree driver using the old {get,set}_settings API.

Note: this is only build tested. I don't have the hardware at hand; as it's
10Mb/s half duplex device and driver can be built only for one subplatform
of 32-bit ARM (Acorn RiscPC), it may be difficult to find someone who does.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This gets rid of the licence boilerblate in favor of SPDX identifier
which only takes a single line comment.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

genl_err_attr() sets netlink_ext_ack::bad_attr which is a pointer to const
struct nlattr so make the attr argument also const.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <john@phrozen.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Nelson Chang <nelson.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: add NFP5000 support

This series broadly speaking adds support for NFP5000 and
related products.

First we add support for loading FW from flash.  We need to allow
for the management processor to provide extended log messages when
FW is loaded.  This is needed when FW selection policy is to compare
the FW on the disk and in the flash, and load the newer.  User should
be told what FW was selected.

We use this opportunity to add extended errors for normal FW loading
as well.

Next we add support for requesting HW information from the management
processor.  Up until now the driver read the HWinfo as it appears in
card memory, but there can be cases when management processor has
additional information or generates the entries dynamically so
occasionally we will have to consult it.  We use this to look up MAC
addresses for PCIe netdevs.

Next the actual patch with NFP5000 support and a small dose of
refactoring of PCIe init.

The remaining patches add support for reading RTsymbol types we
didn't need before.  Ones explicitly placed in external memory unit's
cache and absolute ones.

This part begins with a patch moving the logic which figures out
the correct bit offsets to device probe, to avoid redoing the
calculation for each access.  Second patch adds error messages
for easier troubleshooting.  Next patch adds helpers which will
take care of address conversions to reach into EMU cache.
Subsequently users are migrated from the raw CPP API to the new RTsym
helpers.  Finally we add support for reading absolute symbols.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the RTsym users access the size via the helper, which
takes care of special handling of absolute symbols.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support in nfpcore for reading the absolute RTsyms.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all users of RTsym to the new set of helpers which
handle all targets correctly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make nfp_rtsym_{read,write}_le() and nfp_rtsym_map() use the new
target resolution helpers to allow accessing in-cache symbols.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Align nfp_cpp_map_area() with other CPP-level APIs and pass
encoded cpp_id/dest rather than target, action, domain tuple.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RTsyms may have special encodings for more complex symbol types.
For example symbols which are placed in external memory unit's
cache directly, constants or local memory.  Add set of helpers
which will check for those special encodings and handle them
correctly.

For now only add direct cache accesses, we don't have a need to
access the other ones in foreseeable future.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add error prints to CPP target encoding/decoding logic, otherwise
it's quite hard to pin point the reasons why read or write
operations fail.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will soon need the MU locality field offset much more
often than just for decoding MIP address.  Save it in nfp_cpp
for quick access.  Note that we can already reuse the target
config from nfp_cpp, no need to do the XPB read.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a switch statement instead of ifs for code dependent
on chip version.  While at it make sure we fail for unknown
chip revisions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add NFP5000 to supported chips, the chip is backward compatible
with NFP4000 and NFP6000, so core PCIe code needs to handle it
the same way as 4k and 6k.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In multi-host scenarios Management FW may allocate MAC addresses
at runtime, we have to use the indirect lookup to find them.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Management FW can adjust some of the information in the HWinfo table
at runtime.  In some cases reading the table directly will not yield
correct results.  Add a NSP command for looking up information.
Up until now we weren't making use of any of the values which may
get adjusted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To enable easier FW distribution NFP can now automatically
select between FW stored on the flash and loaded from the
kernel.

If FW loading policy is set to auto it will compare the
versions of FW from the host and from the flash and load
the newer one.  If FW type doesn't match (e.g. one advanced
application vs another) the FW from the host takes precedence,
unless one of them is the basic NIC firmware, in which case
the non-basic-NIC FW is selected.

This automatic selection mechanism requires we inform user
what the verdict was.  Print a message to the logs explaining
the decision and the reason.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flash may contain a default NFP application FW.  This application
can either be put there by the user (with ethtool -f) or shipped
with the card.  If file system FW is not found, attempt to load
this flash stored app FW.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is already a fair number of arguments to nfp_nsp_command()
family of functions.  Encapsulate them into structures to make
adding new ones easier.  No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2018-08-28

This series contains new features and implementation updates for the
ice driver.

Anirudh reworks the current flex programming logic to add support for
a second flex descriptor profile.  Updated the transmit scheduler
code to handle changes to the spec, specifically the firmware expects
a 4KB buffer at all times so fix the default scheduler topology buffer
size.  Also the maximum children per node per layer is replaced by
maximum sibling group size.  Adds a check to ensure a reset is not in
progress before exercising a control queue operation.  Refactored the
switch rule management functions and structures to simply the logic and
to add a common function to search for a rule entry and add a new rule
entry.  Refactored the VSI allocation, deletion and rebuild flow so that
on reset we can restore all the filters that were previously added.  Did
some spring cleaning of define names and macros.

Dan updates the admin queue command for requesting resource ownership
to the latest specification by adding new enum's and change the locks.

Zhenning optimizes the driver by using the existing buffer in a
structure directly versus a local array.

Chinh implements handlers for ethtool for get and set link settings.

Sudheer implements transmit hang/timeout detection and malicious driver
detection in the driver.

Md Fahad Iqbal implements the get and set bridge mode operations.

Hieu adds the ability for firmware logging during initialization.

Brett updates the driver to only enable VSI transmit and receive pruning
when VLAN 0 is active, and when VLAN 0 is removed/not active, pruning is
disabled.

Akeem adds a flag to use for stopping the service task.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-08-28

This series contains updates to ixgbe and ixgbevf only.

Sebastian adds support for firmware NVM recovery mode, which logs a
message when errors are detected and un-registers the device.  Also
fixed RSS type recognition with VF to VF communication.

Shannon Nelson implements IPsec hardware offload for VF devices in
Intel's 10GbE x540 family of Ethernet devices.

The IPsec HW offload feature has been in the x540/Niantic family of
network devices since their release in 2009, but there was no Linux
kernel support for the offload until 2017.  After the XFRM code added
support for the offload last year, the HW offload was added to the ixgbe
PF driver.

Since the related x540 VF device uses same setup as the PF for implementing
the offload, adding the feature to the ixgbevf seemed like a good idea.
In this case, the PF owns the device registers, so the VF simply packages
up the request information into a VF<->PF message and the PF does the
device configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When failing the request because we can't support that offload,
reporting EOPNOTSUPP makes much more sense than ENXIO.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There seems to be a problem in the x540's internal switch wherein if SR-IOV
mode is enabled and an offloaded IPsec packet is sent to a local VF,
the packet is silently dropped.  This might never be a problem as it is
somewhat a corner case, but if someone happens to be using IPsec offload
from the PF to a VF that just happens to get migrated to the local box,
communication will mysteriously fail.

Not good.

A simple way to protect from this is to simply not allow any IPsec offloads
for outgoing packets when num_vfs != 0.  This doesn't help any offloads that
were created before SR-IOV was enabled, but we'll get to that later.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the IPsec initialization into the driver startup and
add the Rx and Tx processing hooks.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the IPsec offload support code.  This is based off of the similar
code in ixgbe, but instead of writing the SA registers, the VF asks
the PF to setup the offload by sending the offload information to the
PF via the standard mailbox.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix up the register definitions for using IPsec offloads and
add the new mailbox message IDs.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add an add and a delete message for IPsec offload requests from
the VF.  These call into the IPsec functions that can translate
the message buffer into a useful IPsec offload.

These new messages bump the mbox API version to 1.4.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add a private flag to expressly enable support for VF IPsec offload.
The VF will have to be "trusted" in order to use the hardware offload,
but because of the general concerns of managing VF access, we want to
be sure the user specifically is enabling the feature.

This is likely a candidate for becoming a netdev feature flag.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>