- 11 Jan, 2016 23 commits
-
-
Javier Martinez Canillas authored
The omap3isp driver parses the graph endpoints to know how many subdevices needs to be registered async and register notifiers callbacks for to know when these are bound and when the async registrations are completed. Currently the entities pad are linked with the correct ISP input interface when the subdevs are bound but it happens before entitities are registered with the media device so that won't work now that the entity links list is initialized on device registration. So instead creating the pad links when the subdevice is bound, create them on the complete callback once all the subdevices have been bound but only try to create for the ones that have a bus configuration set during bound. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Javier Martinez Canillas authored
The omap3isp driver initializes the entities and creates the pads links before the entities are registered with the media device. This does not work now that object IDs are used to create links so the media_device has to be set. Split out the pads links creation from the entity initialization so the links are created after the entities have been registered with the media device. Suggested-by:
-
Mauro Carvalho Chehab authored
Interfaces are different than entities: they represent a Kernel<->userspace interaction, while entities represent a piece of hardware/firmware/software that executes a function. Let's distinguish them by creating a separate structure to store the interfaces. Later patches should change the existing drivers and logic to split the current interface embedded inside the entity structure (device nodes) into a separate object of the graph. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
Declare the interface types that will be used by the new G_TOPOLOGY ioctl that will be defined later on. For now, we need those types, as they'll be used on the internal structs associated with the new media_interface graph object defined on the next patch. Acked-by:
-
Javier Martinez Canillas authored
Now that the struct media_entity .parent field is unused, it can be safely removed. Since all the previous users were converted to use the .mdev field from the embedded struct media_gobj instead. Signed-off-by:
-
Javier Martinez Canillas authored
The struct media_entity has a .parent field that stores a pointer to the parent struct media_device. But recently a media_gobj was embedded into the entities and since struct media_gojb already has a pointer to a struct media_device in the .mdev field, the .parent field becomes redundant and can be removed. This patch replaces all the usage of .parent by .graph_obj.mdev so that field will become unused and can be removed on a later patch. No functional changes. The transformation was made using the following coccinelle spatch: @@ struct media_entity *me; @@ - me->parent + me->graph_obj.mdev @@ struct media_entity *link; @@ - link->source->entity->parent + link->source->entity->graph_obj.mdev @@ struct exynos_video_entity *ve; @@ - ve->vdev.entity.parent + ve->vdev.entity.graph_obj.mdev Suggested-by:
-
Mauro Carvalho Chehab authored
With the new API, a link can be either between two PADs or between an interface and an entity. So, we need to use a better name for the function that create links between two pads. So, rename the such function to media_create_pad_link(). No functional changes. This patch was created via this shell script: for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f) $(find include/ -name '*.h' -type f) ; do sed s,media_entity_create_link,media_create_pad_link,g <$i >a && mv a $i; done Acked-by:
-
Mauro Carvalho Chehab authored
It helps to check if the media controller is doing the right thing with the object creation and removal. No extra code/data will be produced if DEBUG or CONFIG_DYNAMIC_DEBUG is not enabled. Acked-by:
-
Mauro Carvalho Chehab authored
We can only free the media device after being sure that no graph object is used. In order to help tracking it, let's add debug messages that will print when the media controller gets registered or unregistered. Acked-by:
-
Mauro Carvalho Chehab authored
Just like entities and pads, links also need to have unique Object IDs along a given media controller. So, let's add a media_gobj inside it and initialize the object then a new link is created. Acked-by:
-
Mauro Carvalho Chehab authored
PADs also need unique object IDs that won't conflict with the entity object IDs. The pad objects are currently created via media_entity_init() and, once created, never change. While this will likely change in the future in order to support dynamic changes, for now we'll keep PADs as arrays and initialize the media_gobj embedded structs when registering the entity. Acked-by:
-
Mauro Carvalho Chehab authored
As entities are graph objects, let's embed media_gobj on it. That ensures an unique ID for entities that can be global along the entire media controller. For now, we'll keep the already existing entity ID. Such field need to be dropped at some point, but for now, let's not do this, to avoid needing to review all drivers and the userspace apps. Acked-by:
-
Mauro Carvalho Chehab authored
Due to the MC API proposed changes, we'll need to have an unique object ID for all graph objects, and have some shared fields that will be common on all media graph objects. Right now, the only common object is the object ID, but other fields will be added later on. Acked-by:
-
Javier Martinez Canillas authored
Accessing media_entity ID should now use media_entity_id() macro to obtain the entity ID, as a next patch will remove the .id field from struct media_entity . So, get rid of it, otherwise the omap3isp driver will fail to build. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Javier Martinez Canillas authored
Accessing media_entity ID should now use media_entity_id() macro to obtain the entity ID, as a next patch will remove the .id field from struct media_entity . So, get rid of it, otherwise the omap4iss driver will fail to build. Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of accessing directly entity.id, let's create a macro, as this field will be moved into a common struct later on. Acked-by:
-
Mauro Carvalho Chehab authored
This logic was broken on the original patch, likely due to a cut-and-paste mistake. Fix it. Signed-off-by: -
Mauro Carvalho Chehab authored
This was depending on broken because we're working at the Media Controller API, with has... issues. As this got fixed, we can re-enable it. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by:
-
Mauro Carvalho Chehab authored
Instead of seeking for the decoder every time analog stream is started, cache it. This simplifies the code a little bit. Requested-by:
Hans Verkuil <hverkuil@xs4all.nl> Acked-by:
-
Rafael Lourenço de Lima Chehab authored
Add support for analog and dvb tv using media controller. Signed-off-by:
Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com> Signed-off-by:
-
Shuah Khan authored
Change to define Media Controller API when CONFIG_MEDIA_CONTROLLER is enabled. Define stubs for CONFIG_MEDIA_CONTROLLER disabled case. This will help avoid drivers needing to enclose Media Controller code within ifdef CONFIG_MEDIA_CONTROLLER block. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
Add new media controller API to allocate media device as a device resource. When a media device is created on the main struct device which is the parent device for the interface device, it will be available to all drivers associated with that interface. For example, if a usb media device driver creates the media device on the main struct device which is common for all the drivers that control the media device, including the non-media ALSA driver, media controller API can be used to share access to the resources on the media device. This new interface provides the above described feature. A second interface that finds and returns the media device is added to allow drivers to find the media device created by any of the drivers associated with the device. Signed-off-by:
-
- 23 Dec, 2015 16 commits
-
-
Chen-Yu Tsai authored
The driver allocates the spinlock but fails to initialize it correctly. The kernel reports a BUG indicating bad spinlock magic when spinlock debugging is enabled. Call spin_lock_init() on it to initialize it correctly. Fixes: b4e3e59f ("[media] rc: add sunxi-ir driver") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Antti Palosaari authored
Do not remove slave TS NULL padding PID (0x1fff) by default as there is no real need. After that whole TS is passed to kernel sw PID filter. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
It is hard to debug possible I2C failures without knowing the possible register itself. Add register number to error printing. Signed-off-by:
-
Antti Palosaari authored
Return current active rtl2830/rtl2832 register page from the driver cache in order to reduce I2C I/O. Register page is already cached due to I2C write needs. Signed-off-by:
-
Philipp Zabel authored
Hook up the MPEG-2 ES decoder. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Philipp Zabel authored
We could support start streaming with an empty output queue for the BIT decoders due to the bitstream buffer which could still contain data at this point, but there is really no reason for userspace to expect this to work. Simplify the code by disallowing it. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
coda_jpeg_check_buffer only cares about the buffer length and contents, so change the parameter type back from v4l2_vb2_buffer to just the vb2_buffer. Instead of just checking the first and last bytes for the SOI and EOI markers, relax the EOI marker check a bit and allow up to 32 trailing bytes after the EOI marker as hardware generated JPEGs sometimes contain some alignment overhead. Signed-off-by:
-
Philipp Zabel authored
This function is not used outside coda-common.c. Signed-off-by:
-
Andrzej Hajda authored
MFC register addresses are used only by writel/readl macros which already takes care of proper register accessing. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
Both macros can be merged into one. Signed-off-by:
-
Andrzej Hajda authored
MFC driver uses dev->irqlock spinlock to protect queues only, but many context fields require protection also - they can be accessed concurrently from IOCTLs and IRQ handler. The patch increases protection range of irqlock to those fields also. Signed-off-by:
-
Andrzej Hajda authored
Many version specific functions are not called by common code, so there is no need to use callbacks. Additionally some of them are not used at all, so they can be safely removed. Signed-off-by:
-
Andrzej Hajda authored
Code for queue cleanup has nothing specific to hardware version. Signed-off-by:
-
Andrzej Hajda authored
Both version of MFC driver use functions with the same body and name. The patch moves them to common location. It also simplifies it. Signed-off-by:
-
Julia Lawall authored
The s5p_mfc_codec_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 21 Dec, 2015 1 commit
-
-
Mauro Carvalho Chehab authored
As reported by kmemleak: unreferenced object 0xffff880321e1da40 (size 32): comm "modprobe", pid 3309, jiffies 4295019569 (age 2359.636s) hex dump (first 32 bytes): 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 G............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82278c8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8153c08c>] kmem_cache_alloc_trace+0x1ec/0x280 [<ffffffffa13a896a>] au8522_probe+0x19a/0xa30 [au8522_decoder] [<ffffffff81de0032>] i2c_device_probe+0x2b2/0x490 [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90 [<ffffffff81ca7c1b>] __device_attach_driver+0x17b/0x230 [<ffffffff81ca15da>] bus_for_each_drv+0x11a/0x1b0 [<ffffffff81ca6a4d>] __device_attach+0x1cd/0x2c0 [<ffffffff81ca7d43>] device_initial_probe+0x13/0x20 [<ffffffff81ca451f>] bus_probe_device+0x1af/0x250 [<ffffffff81c9e0f3>] device_add+0x943/0x13b0 [<ffffffff81c9eb7a>] device_register+0x1a/0x20 [<ffffffff81de8626>] i2c_new_device+0x5d6/0x8f0 [<ffffffffa0d88ea4>] v4l2_i2c_new_subdev_board+0x1e4/0x250 [v4l2_common] [<ffffffffa0d88fe7>] v4l2_i2c_new_subdev+0xd7/0x110 [v4l2_common] [<ffffffffa13b2f76>] au0828_card_analog_fe_setup+0x2e6/0x3f0 [au0828] Checking where the error happens: (gdb) list *au8522_probe+0x19a 0x99a is in au8522_probe (drivers/media/dvb-frontends/au8522_decoder.c:761). 756 printk(KERN_INFO "au8522_decoder attach existing instance.\n"); 757 break; 758 } 759 760 demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); 761 if (demod_config == NULL) { 762 if (instance == 1) 763 kfree(state); 764 return -ENOMEM; 765 } Shows that the error path is not being handled properly. The are actually several issues here: 1) config free should have been calling hybrid_tuner_release_state() function, by calling au8522_release_state(); 2) config is only allocated at the digital part. On the analog one, it is received from the caller. A complex logic could be added to address it, however, it is simpler to just embeed config inside the state. Signed-off-by:
-
